Lost file "IMAQ Vision example Folder.vi"

Similar Questions

• Lost files after copying the folder

  Hi all

  I made a huge mistake which I deeply hope will have a solution. Let me explain with an example. I have a file has my local drive (unit D) with A1, A2 and A3 subfolders it contains. I have a folder in my hard disk with only A1 inside.
  I copied folder from the hard drive of my D drive accidental everything. As a result, I lost A2 and A3.
  Is it possible to recover these files?
  Thank you very much
  yoelciclista

  Hello

  You can try this free program.

  http://www.Piriform.com/Recuva

  But it sounds like it may be a work of Experts in data recovery; which are very expensive.

  See you soon.

• If I copy and paste an image file (jpeg, for example) in the folder of photos on my Mac, is it automatically imported in the Photos app?

  If I copy & paste an image file (jpeg, for example) that I downloaded from the internet to the folder of photos on my Mac, is it automatically imported in the Photos app? Note that the picture on my Mac folder is the folder that contains the file "Library.photoslibrary Photos".

  N ° you must actively import photos with the file-> import... command.

  Given that you can delete the file as soon as it is imported - if you have the copy in the library checked preferences - I use a folder called 'imports' on my desk to separate files that I'm importing. Once they are imported files into the import folder can trash.

• LOST MULTISIM EXAMPLES FOLDER

  I have the version student 11.0 Ms. It seemed to me losing the examples folder. I was doing some household last week, who knows. Where exactly is this folder. I still have the CD but can't seem to find it. Searching in windows did not help either.

  Thank you.

  Yay ;>

  DIFFICULTY:

  CONTROL PANEL > CHANGE UNINSTALLER > REPAIR...

  LPD.

• IMAQ Vision: Mode invalid (Hex 0xBFF6048C) ranking.

  I use usb enter vi and when I run my vi I get an error

  IMAQ Vision: Mode invalid (Hex 0xBFF6048C) ranking.

  what it means and how to fix it?

  Thanks for your help

  another stupid mistake. It had to be a file name in the folder not a file name.

• OE6 in XP, compaction of the lost files all emails. Anyone else done this?

  Using Outlook Express 6 with Win XP I compacted files as requested. next time, I used email all old messages were gone and never seen again. I've never used 'compact the file"once again - it was a disaster. Anyone else done this?

  If you compact, you will always lose messages at any given time.
   
   
  Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.
   
  
  Why OE insists on compacting folders when I close it? :
  http://www.insideoe.com/FAQs/why.htm#compact
   
  
  Why mail disappears:
  http://www.insideoe.com/problems/bugs.htm#mailgone
   
   
   
  Recovery methods:
   
  If you are running XP/SP3, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.
   
  To restore a folder bak on the message store folder, first find the location of the message store.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
   
  In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
   
  
  Note: If you have new messages in the folder you are go restore, move them to a folder first created user, or they will be lost. They can be moved once the old posts have been restored.
   
  
  Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.
   
   
  Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.
   
   
  First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.
   
  
  If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.
   
   
  If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
   
   
  If you have not then bak copies of your dbx files in the Recycle Bin:
   
  
  DBXpress run in extract disc Mode is the best chance to recover messages:
  http://www.oehelp.com/DBXpress/default.aspx
   
   
  And see:
  http://www.oehelp.com/OETips.aspx#4
   
   
   
   
   
  
  A general warning to help avoid this in the future:
   
  
  Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.
   
  
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently.
   
   
   
  For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
   
   
  And backup often.
   
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx  
   
   
   
  
   

• How to download imaq vision

  I am a new user of labview and I wish to study this subject IMAQ vision. However, for the same thing, I have no idea as to how I can use it on LabView. Smoker I don't understand if I have to download additional software for IMAQ Vision work with LabView. Kindly advice me.

  Jean-Luc

  NOR-Vision and NOR-IMAQ are two different things. NOR-IMAQ is a set of drivers and software to acquire, view and save images of some devices. The supported devices are in the readme file. This software is free. NEITHER Vision is a software level. He did work with a wider variety of devices. It is not free.

  I think that it is best to call your local sales office OR that they would be better suited to help you, rather than this forum. We mainly answer technical questions here.

• IMAQ Vision Image structure

  I currently grabbing an image, using my own equipment and windows messaging and do it in memory as a bitmap image.  How to copy this image in a structure Image IMAQ Vision.  I see other threads that the structure is the owner, but is it possible to copy the raw data in the structure of the Image.  The only way I can achieve this is to write in a BMP file, and then use the () imaqReadFile to read back in. It takes a lot of time, it would be much faster if I could copy from one location to another.

  You can use imaqArrayToImage(), but I've always found this difficult to use function.

  my favorite way is to create a new image of the right size using imaqCreateImage(), then get a pointer to the first pixel using imaqGetImageInfo() and fill pixels directly by copying the data in the buffer of the image. I already showed how to access pixels directly on this forum. You should pay attention to the size of your pixels and the format of the image (RGB, grey levels).

• sequential files, playback of a folder in LabVIEW 2012 problem

  Respected Sir/Madam,
  I tried to make a program that
  can read the files sequentially on a folder and add all the second column in the set
  files into a single file (*.csv).
  Unfortunately it is the reading of files as (1,10,100,1000, 11, 19,...), but I want to
  go read the files in sequential format (1,2,3, 4... 1000).
  For your kind references, here I have attached the vi and the example files
  ("renamefiles folder" - data-sample test, you'll need to read)
  in order).
  (using "rename the folder files" will easily understand the sequential)
  problem reading) (if you add zero in front of the file name and make those same numbers; will give the good sequential)
  reading)
  Please find the attached documents and do what is necessary as soon as POSSIBLE.

  Thanking you.

  Kind regards

  Sasmas Mahat
  E & CEE, IIT Kharagpur
  Mob: + 919474504030

  You must use some kind of logic alpha like this: http://zone.ni.com/devzone/cda/epd/p/id/12 and place it after your folder list vi

  

• How to load a file automatically from a folder that contains batch files?

  I have pictures taken every 2 or 3 minutes and then dumped into a file with number of sequentail as file names.

  Now, I want to find a routine to check the last picture and load it into labview automatically.

  Please be aware that I have other material acquisition of images and store them in the computer, all the tips with the help of any other device I/O are appreciated, but not necessary.

  Task is simpel! (hopfully for you.)  Just find the latest file in a fixed folder and open it in labview (for example reading JEPG file.vi).  any ideas?

  Thank you!

  I have written a VI to find the most recent file (well, changed the file) in a given folder.

  

• bug in several functions of IMAQ vision mask

  Some functions IMAQ Vision bad work if you use the image source as the mask. I keep running into this bug in IMAQ Vision, Vision functions exhibit this behavior, and others do not. It is not documented in job descriptions. Even if it were, it would still be a bug. Example:

  1. create an image source U8 containing zeros and nonzero values.

  2. son of the image in the entry source and IMAQ mask entry quantify and return the value of % of the global report to see what percentage of pixels are different from zero.

  The answer is wrong. If you copy the image in a separate image first and distinct picture of wire in the input mask, you get the right answer. See attached VI for building

  

  See you soon,.

  -root

  If someone knows a way to return the number of pixels not dummies in an image without duplicating the image in memory, please post the method here so I can mark it as a solution. I find that using IMAQ getpixelvalue in a double loop is extremely slow, even with a shift as a counter register.

  Using the histogram IMAQ VI seems to work (with no mask image)-the first index of the returned histogram array is the number of zero pixel, so the sum of the table no less (or less area this) is the number of pixels non-null.  The VI has the same bug with the image of the mask (and I agree with you that document a bug does not correct!) but at least you can use for this problem.

  Cheers ~ Greg

• Renaming of documents by adding an annex of the commune for the names of existing files on several files in a single folder

  Is it possible to add an annex to the town (for example "-file BL ') existing file name (for example"daily reports1) to several (selected) files in the same folder?  (The example given could therefore be renamed "daily reports - comes from the BL file").  I need to do this to identify the source of documents folder when they are copied into a common folder: to compare with the similar files in other folders for various purposes.  There are a lot of documents in many files, I need to transfer and compare.  A rough estimate, it is that I need to add an annex to the town of 200 files named differently in a single folder and repeat this process for 30 files: with my existing knowledge of XP, this means that I would have use the rename individually on 6000 documents, and if the additional annex has been say 5 characters which would be a minimum of 30 000 key strokes : If adding appendages common to several document names selected in a folder is possible, this might reduce the name change to close to 150 list.

  PLEASE NOTE the multiple rename function where each selected file is the same thing with a renamed after the index number in brackets should not be - the original file name should be kept.

  Hello

  Refer to the link below and check if this may help:http://social.msdn.microsoft.com/Forums/en-US/sqlintegrationservices/thread/1b0deaf4-8416-4e03-aa9c-e3ce1259866b

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Files & documents within a folder is moved to another folder

  We have files within a folder on a drive L: some files missing from the inside of the folder and find themselves in a different folder on the same drive.  How can I eliminate the possibility that someone is clicking and dragging files inadvertently in another folder?

  Hello Rbitty68,

  Welcome to the Microsoft Answers Community!

  The best solution to prevent the fall and drag accidental is to change the number of pixels in the file should be moved to activate slide / move. You can do this by downloading Tweak UI provided by Microsoft to change this and many other parameters.

  Download Tweak UI

  Once you have downloaded/installed Tweak UI:

  ·         Click Start

  ·         Click on all programs

  ·         Click Powertoys for Windows XP

  ·         Click Tweak UI

  ·         Click the mouse

  ·         Under the mouse sensitivity, Drag:, enter a higher number as currently defined. (for example: 99)

  Now the file will be dragged significantly until the file is actually moved anywhere

  Hope that helps, I look forward to hearing from you.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Compressing files for the WinSxS folder

  I wonder why the folder winsxs in Vista and Windows 7 do not use file compression? Due to the nature of the case, it would not affect the performance of the system and would save several gigabytes of disk space.  The only files that can be skipped is the manifest files that are less than 4 KB of size...

  The INF file is very small, I think it wise to use compression for a file on this folder as well :)

  Each regular on NTFS file can be considered be a single 'hardlink' a data element. You can have multiple hard links, which is like having the same file in two places with just the cost of the extra link and not the data. The '. 'and'.. ' directory? A few hard links in the current directory and the directory's parent. WinSxS is full of files that are installed as components, usually of Windows and other Microsoft software. When these recommended "settled" in a given place, what actually happens is that a new link (hard link) is created in the data file. It is one of the reasons why Vista can be installed that on NTFS - it made prolific use of hard links. The physical files has obvious implications - you're not only compressing the installation media, but only copies of the actual files that make up Windows. If you package, part of what you package consists of installed files - or files that you can install later. And Windows (or other applications) do not always provide a compressed file. For example, Vista will choke if you try to install the libraries shared IIS and its XML schema for winsxs files are compressed. They probably check that it still has the read-only attribute and I forgot to allow the presence of other attributes. Personally, I think it's a bug, but whatever it is, there is a risk that you must be aware of. No need to cherish luxuries (cause everythine come and go) even the life you have is borrowed (Cause you are not promised tomorrow)

• Recover lost files, photos, internet connection

  How can I recover lost files, photos, etc., after restoring the system, the computer seems to be the original settings and everything disappeared. My files can be restored?

  Hello

  did you do a restore factory setting on purpose?

  If you did, read this:

  a clean install wipes the hard drive clean of everything

  You cannot undo what you've done

  If you have lost data, you can try this

  http://www.Piriform.com/Recuva

  Read also:

  Since we don't know exactly how you reinstalled it seek a windows.old folder

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  or even return to a previous operating system by using the information in file window.old at the link below

  http://support.Microsoft.com/kb/933168

  If the above does not work:

  Try the data recovery experts

  but they are very expensive

  _________________________________________________________________

  If you do nothing and your desptop changed, read this:

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ______________________________________________________________

  If you have been infected by malicious software, read this:

  read the information at the bottom of the below link to the subject of some malware that hide your data files and the cure for it regarding

  Read article 17

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery

  also follow the correct for that malware removal steps, just to be safe, let's