lost my iCloud security code help

Similar Questions

• How to reset the iCloud security code

  Can you reset the Security Code iCloud until one has the entered incorrectly too many times?

  (I am connected to iCloud on my MacBook and want to connect on my iPad, but am unsure of the security code to use, so I want to reset it on the MacBook.)

  Apple Help topic for If you register your iCloud Security Code wrong too many times... says:

  …

  On a Mac using OS X Yosemite or later:

  Choose the Apple menu > System Preferences, and then click iCloud.

  Click Options next to keychain.

  Click on change the Security Code, and enter a new cryptogram iCloud.

  My prefs do not show 'Options' beside keychain. (Keyring is enabled).

  I have to go through the process of entry that he incorrectly too many times on the iPad before 'Options' will appear on the Mac?

  There is no way to reset the iCloud security code as it comes to Apple servers.  What specific problems you encounter when you try to connect to your iPad?

• I have an iPhone 6 and get this message. Continue coarse iCloud on this iPhone approve him to one of your other devices using iCloud or enter your iCloud security code.  I don't know my security code and only have my book of power with me.

  I get this message on my iPhone 6.  To continue using Icloud on this iPhone, do agree with your other devices using iCloud or either your iCloud security code.  I don't know my security code.  I have my book of power with me how check my iPhone 6.

  Mike.

  Hello

  For checking your apple iphone should send you a massage to your other device

  With a code.

  See you soon

  Brian

• icloud security code

  Why did when I try to turn on iCloud Keychain he ask me if I want to authenticate with my security code OR device, and when I choose security code and then correctly enter my security code, always wants to send another code by SMS to a device for approval?

  What is the point of giving me a choice of security mechanism of GOLD code if it is going to require a device anyway?  Is there something I'm missing about this procedure?

  The two methods are:

  (1) require the authentication of a device previously authorized.  This means that the iCloud Keychain system will send a pop-up at all your devices that are currently already using iCloud keychain and authenticated.  This is the easiest method, as it will simply pop up on your other devices and you authenticate with your password Apple ID to give your new device access.  Fact.

  (2) use the Code Security and verification of device Code.  This is where you enter your security code you created for iCloud keychain and then enter the number of secondary authentication received (usually via SMS).  This method for those who may have a backup plan for the first option.  As in my case, I have the SMS authentication will my phone number and my wife's phone number.  While my wife does not access my iCloud Keychain, I can use him as a point of authentication in case I'm not the #1 option.

  In your case, you are clearly able to make both options with your iPhone because its iCloud authenticated in Keychain (already using the service) as well as put in place for the secondary SMS verification.

  Well, I hope this explains why there are two options and that they could be used differently.  At the end of the day, it allows multiple options for different scenarios.

  Frequently asked questions about iCloud Keychain - Apple Support

• verification for icloud Keychain code troubleshoot

  verification for icloud Keychain code is sent by SMS to the phone number. Help me I can not access this issue because I have a new mobile phone number. My apple account has already changed with my new cell phone number, but the icloud Keychain verification code is always sent to my old cell phone rather than my new number. Please tell me what to do step by step because I'm still a noob

  If you cannot access a device with iCloud active Keychain, you can complete Setup by resetting iCloud Keychain on the device:

  iOS:

  1. In iOS 8, tap Settings > iCloud > Keyring > advanced. In iOS 7, tap Settings > iCloud > keychain.
  2. Tap approve with Security Code.
  3. When asked to enter your iCloud Security Code, type Code forgotten.
  4. Press Reset iCloud keychain to replace your iCloud Keychain in the cloud with iCloud on your device keychain items.
  5. Press Reset to confirm. You will be asked to create a new cryptogram iCloud.

• I am tryng to buying music on itunes, but it says security code wrong please help

  Hello

  I have problems I want tp purchase music on my itunes bt ts always requires the security code that I don't have it please help

  Check your card information. If they are correct, try to change or remove your Apple ID - Apple Support payment information

• iCloud often ask a security code 4 digits.  I have no idea what it is, my code is six digits.  What is the 4 digit version and where I put or find it?

  iCloud often ask a security code 4 digits.  I have no idea what it is, my code is six digits.  What is the 4 digit version and where I put or find it?

  Have you implemented 2-step audit on your Apple ID? If you do this, then whenever you connect to icloud.com you are likely to be asked for the security code, which will be sent by SMS to your device of 'trust' - mainly the mobile phone you have registered with Apple.

  The six-digit code that you think is probably the password in your iOS device, which is quite distinct.

• lost on iCloud photos?

  All my photos are lost on iCloud if I reset my iPad or can I get back them?

  Your question does not provide sufficient details to offer much help.

  Try to go to iCloud.com from a browser on a computer and check your photos. So here, they are not lost.

  If you restore your iPad to factory settings, you should not lose their. Try to download:

  Archive or make copies of your iCloud - Apple Support data

• Why keep having added again and again the same card? The security code disappears and I have to enter again.

  Now I have to add the same card, because the security code disappears.

  Take a look at this article, it can help you change or delete your Apple ID - Apple Support payment information

  or you can also contact - official Apple Support

• I want to unlock my ipod 5th generation locked on icloud security

  I want to unlock my ipod 5th generation locked on icloud security security issues don't pass not because I forgot details

  He wants the details of your iCloud? Are you the owner of the device, or did you buy it used? If you are not the original owner, you need the original owner to remove their account. IF it doesn't, you cannot enable the device, and Apple will not help that.

• He asks to randomly send me my security code, even if the watch is on my wrist

  My watch sporadically asks me to return my security code, even if the watch is always on my wrist.

  HI - try these steps

  Make sure the wrist detection is enabled:

  -On your iPhone, in the application of Eve, go to: Watch My > General > wrist Detection - turn on.

  Make sure you wear your watch fits on top of your wrist. With wrist detection and active access code, your watch will automatically lock if it believes it has been removed from your wrist. A bunch of cowards can trigger this by allowing the watch temporarily lose contact with the skin (including if the garment made its way under).

  Some wrist tattoos can also affect performance of the sensor, potentially causing the same behavior.

  Otherwise, it can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  More information:

  Port Apple Watch - Apple Support

• Whenever I connect to a Microsoft account that it requires a security code by sending an e-mail.

  Original title: Microsoft puts obstacles for users of email accounts

  Whenever I connect to a Microsoft account that it requires a security code by sending an e-mail. This different e-mail are not yet accessible on the same PC. This overprotection caused the great disadvantage to us using his accounts. We are unable to access your account to a fine pressing it puts obstacles requiring security codes. We, the owners of the authentic product become more impatient because after payment of money costs a fortune he must face a form of punishment by Microsoft. Under the name of the protection of the accounts, he can't harass us in this way. If our money has been paid without value? This bad trend of Microsoft should soon change. Microsoft itself cannot meet in person the degree of convenience we know trying to connect to their accounts.

  You realize that * you * would allow the "two-step verification", you're talking about, huh?  ;-)

  If you don't like it, turn it off.
   
  http://www.eightforums.com/tutorials/35740-Microsoft-account-two-step-verification-turn-off.html
   
  -It has always been and will always be a compromise between comfort and security, and as more and more of everyday life become digital and floating out there on the hard drives of others - these measures are necessary.

  This isn't just a question of Microsoft in many ways: you have activated the feature that supposedly you cause disadvantages and may turn off and Microsoft gives you just a way to help protect your identity and your information in response to the current state of reality.

• How can I get a security code on my wifi neighbors are tapping into my use

  the neighbors are tappin celine my wifi how can I put the security on my computer setting to stop it.

  \

  Hi Becc,

  Essentially, the procedure is to configure the router for the specific appropriate for your router, and your ISP and your computers and intranet security settings.  You do not block your computers, you encode router transmissions so that others cannot use it without the username and password.  Then you configure your computers (or other devices connected) so that they know the appropriate codes and can communicate with the router.

  When I came across this myself, I discovered that the manufacturer of the router charged; However, I discovered that my ISP supports this particular router and they helped me as well with the router and my computer for free as part of their service - so I'd personally start with your ISP to see if they will help you.

  The following article gives the basic instructions for the router (and a few different), but it only covers the router (and not your connected devices) and it indicates the options to use but sometimes 'the best' is not appropriate or accessible with your ISP or router and the computers (which means that it's OK to learn about it in a general sense (, but you need to communicate with people to get the correct settings).  For example I would use WPA2 but my ISP doesn't support WPA is what I use (and if I tried the other it wouldn't work and I would have had no. clue what I was doing wrong and be stuck and confused). http://www.ehow.com/how_6942409_set-up-wireless-router-security.html.  So think of this as simply a presentation guide but use the following instead.

  In short, to access the router, go to any computer connected and click on start / all programs / accessories / right-click on command prompt, and then click Run as administrator.  Then type IPCONFIG/all.  For your first login, you should see a group of settings as a gateway by default (and possible other inputs) referring to a TCP/IP address (usually 192.168.0.1 or something similar to that).  This is the address of your router.

  Open now IE (or your browser) and in the address field where you can type www.microsoft.com, sometimes rather type the address of the router (for example, 192.168.0.1) and enter.  This should connect to the router where it will ask for a user name and password (almost certainly).  If you know, very well.  If this is not the case, the access provider manufacturer or router can help.  Many use default common (which you should change once get you it, but remember).  Certain combinations of username/password common name include admin/admin, admin/password, administrator/administrator/admin password, simply administrator or with any other admin for the password.

  There must be a security section.  Need you probably to get a security Type (WPA-Personal, WPA2-Personal,...), a Type of encryption (for example, TKIP, AES,...) and a security network (password thinking) key.  The first two depend too much from your ISP and the installation program to help me (and you may have different options or more also)-they need to tell you what to use.  The manufacturer of the router can probably help with this - but the ISP knows and can tell you.  Use a key strong you want it is hard to break.  Here is an article on the creation of strong passwords - for this and especially since you know that you used, I would out max and go even a little further than they suggest: http://www.microsoft.com/security/online-privacy/passwords-create.aspx.  I would choose one with 12 numbers which is a random set of letters lowercase, uppercase, numbers, and symbols - but also one you won't forget but that is anyone's guess (that you don't really want to not have to reset it).

  Once set, so even if not recommended by the router or the people of the ISP because if you forgot your password again, they will not be able to help the router becomes a paperweight (but it prevents a person to reset the router using the same stuff, I suggested above to find one that works - if they were not working and you don't need help to identify it) I would consider changing the default user name and password reset so no one can use this method ignores everything and get (even if you notice that and eventually be locked out yourself - and quite well, they will have to have physical access to the router to reset it because I don't think that this can be done remotely).  I did it with mine.  Others choose not to bother because they assume that nobody's going to such extremes and it would make things easier if you needed help more later and I forgot the password.  It's your choice.  I did it because I'm a little paranoid and know that I forget - but for the most part, I suggest they leave alone that can be a bit going overboard.

  Then go to all devices connected wireless or another for the router and configuration, security codes to enable this device (your computers and perhaps a printer or other devices) to access the router and don't not blocked everything as your neighbors now will be.  Go to network connections and sharing, then the list of wireless connections and select the connection of your router and right click and click Properties.  Click Security and three above options should appear.  Change them to match what you used for the router and save the settings.  Now close the connection to the router (if it doesn't what shouldn't be) and re-establish a connection and you may in.  Do same for all devices (printers and other devices probably have special methods to change these settings and you may need help with these providers to find a way to review the security settings to connect to the router - but usually it's really not hard and you can probably work yourself or using self-help on the Web site of the device or the manual if you still have it).

  That's all.  You have now completed and you are sure.  Again, you will need help from the ISP with the parameters (and they can also help you with everything if you ask and you need), but with this exception, most of the time I think that you can usually do it on your own.  Go into the router manufacturer only if absolutely necessary and the ISP will not or can not help and you can't find try it yourself since many of them charge for this kind of thing (unless it is brand new and some even then) and you need information from the ISP in any case as the router manufacturer probably does not know the right settings for each provider (even if they do for many is not reasonable to assume that they know not just less likely to the ISP).

  I hope this helps.  Assuming that this has not already been moved on Windows Networking Forum, and if that didn't do the trick and you need more assistance, please repost it here: http://answers.microsoft.com/en-us/windows/forum/windows_other-networking?page=1&tab=all&tm=1300700638376.

  Good luck!

• 80072efe I have Vista Home Premium and I can't download updates it keeps giving me this error code help!

  80072efe I have Vista Home Premium and I can't download updates it keeps giving me this error code help!

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  Service Pack 2 is installed? If it has been...
  How long this update problem occurred?
  What is the suite of security/antivirus installed and is a 3rd party firewall used?
  The current AV subscription and it detects malicious software the last time that the system has been analyzed?

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  You can reset the Windows Update components by running the Fixit on this page. But, if there is malware present, she will continue to reset the connection to the update servers:How to reset the Windows Update components
  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:
  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Vista firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  MowGreen Services update - consumer safety

• Do not install the update for SQL Server 2005 Service Pack 3 (KB970892) security code error C0000005

  Do not install the update for SQL Server 2005 Service Pack 3 (KB970892) security code error C0000005

  This update didn't install when I used Vista and is still unable to install now, I updated to Windows 7.

  Have searched for a solution for months with no result. Reason why I updated.

  Any help much appreciated.

  DOUGY,

  Microsoft SQL Server 2005 Express Edition Service Pack

  Post here for assistance:

  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/

  --