LOST MY SOFTWARE OF CREATION OF DOCUMENTS AFTER CRASH COMPUTER

Similar Questions

• How do to get the documents after the computer has been infected by a virus and wiped

  Hello

  My laptop works most completely and there was a humming noise whenever I tried to start. I learned that the laptop was corrupt. I was informed by the customer service to clean the laptop. In doing so, all parameters resumed those available at the time of the purchase in 2008.

  How can I recover all my documents, pictures, etc.?  I take the laptop to a computer technician to help with this.

  Can also advise you how to make a backup of all items stored on my laptop please.

  Kind regards

  J.

  Wiping the phone clean and restore to factory condition as advised by "customer service" (that may be), you actually deleted all the files that were on the computer. Recovery, even by a specialized at great expense data recovery company will be at best fragmentary.

  I'm moving your question to the forum space Windows for system repair and recovery, where it is possible that you may receive some additional tips, but I think that you can simply cut your losses at this point. If there is a hardware problem that caused the initial symptoms, it is likely that you will face more questions and data loss unless you get the hardware repaired/replaced.

  -steve

• When I m I look at an image or another document, after a time (short term) the screen go to the home page, how can I change the time if I don't have this problem?

  When I m I look at an image or another document, after a time (short term) the screen go to the home page, how can I change the time if I don't have this problem

  Hi, Romulo,

  This question should be validated in the Internet Explorer Forum.  Note the drop-down menus.

  http://answers.Microsoft.com/en-us/IE/Forum

  What sites you encounter the problem with?

  Make sure flash player is the current version

  http://www.Adobe.com/software/Flash/about/

  Check Shockwave player is the current version

  http://www.Adobe.com/Shockwave/welcome/

  Check the Java version

  http://Java.com/en/download/installed.jsp

  You check the internet connection

  If you are experiencing network connectivity problems in Internet Explorer, the first thing to do is to make sure that all cables are connected. Then open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair (if you use Windows Vista) or solve problems (if you use Windows 7).

  If the problem persists, see the following articles:

  • Network connection problems
  • How to troubleshoot network connectivity problems in Internet Explorer
  • The problems of Internet connection
  • Internet Explorer error "connection timed out".
  • Why is my Internet connection so slow?

• HP 2542: no 'button' under HP APPS to scan documents after upgrading to w10

  There is no button under HP apps to scan documents after upgrade to windows 10. There is a button for photo creations, but does not scan.

  Hi @lad1,

  Welcome to the Forums of HP's Support. I understand that you do not have an option to scan under the HP apps section.

  Try to run the HP Print and Scan Doctor.

  The following links should also be useful.

  HP printers - help print and scan the doctor for Windows to solve printer problems

  HP printers - printer problems after upgrade to Windows 10

  Have you tried to use the Windows search feature to search the HP Scan application?

• Can I retrieve a deleted document after emptying the Recycle Bin?

  Can I retrieve a deleted document after emptying the Recycle Bin?

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky.  They have so-called saves shadow copies, which are deleted or modified files that can be recovered in case changes/deletions made by mistake.  http://www.Microsoft.com/Windows/Windows-Vista/features/shadow-copy.aspx more information about how to use this feature to: http://blogs.techrepublic.com.com/howdoi/?p=145.

  If you have Vista Basic or Premium of Vista, shadow copies is not available; However, there is an alternative that is free and the shadow copies feature called Shadow Explorer. http://www.howtogeek.com/howto/windows-vista/recover-files-with-shadow-copies-on-any-version-of-windows-vista/.  Although it will not help you this time, it could very well save you in case this happens again.

  In case this does not work (not all files are available through shadow - it occurs periodically), here are some additional free recovery programs that might help:

  http://www.SnapFiles.com/freeware/system/fwdatarecovery.html (first try Recuva)

  http://www.SnapFiles.com/get/DiskDigger.html (try this second - if it still doesn't work the chances of recovery are very slim, but we invite you to try the other options to see if they work better)

  http://www.SnapFiles.com/get/easusdfr.html

  http://www.SnapFiles.com/get/restoration.html

  http://www.SnapFiles.com/downloads/Recuva/dlrecuva.html

  http://www.SoftPerfect.com/products/FileRecovery/

  http://techpaul.WordPress.com/2008/06/23/how-to-recover-your-lost-files/

  The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some or most or even all files - it's a matter of luck).

  Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I am trying to install CS5 on my iMac, after my computer crashed. I get a message saying that the software is already installed and will not install again. How can I install it again?

  I am trying to install CS5 on my iMac, after my computer crashed. I get a message saying that the software is already installed and will not install again. How can I install it again?

  Hi Marleneb3511919,

  I'm sorry for the inconvenience caused to you.

  I guess you tried rebooting your system?  If so, and the problem persists please try the steps listed in this document https://discussions.apple.com/thread/240851?start=0&tstart=0

  Please let us know if this goes through.

  Kind regards

  Aurélie hamadi

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• Restore access to My Documents after reinstalling XP, I get the message: 'access denied '.

  Original title: restore access to My Documents after reinstalling XP

  Recently, I acquired a virus with which Microsoft Security Essentials could not cope.  Then one day the computer refused to start.  I wrongly assumed that my hard drive was dead, so I installed a new HD and reinstalled Windows XP.  [Actually, I first tried the upgrade to Windows 7, because program upgrade windows 7 Microsoft has already said that my computer was compatible... but Windows 7 disk says otherwise!]  Then I tried to install the HD original in an another drive Bay and discovered it still worked, but I could not boot from it.  Apparently, the virus has killed the OS (Windows XP) but my files, programs and documents are still there.  The problem is that when I try to access my old "My Documents" folder, I get the message: 'access denied '.  I believe that this is because the files are stored in a password protected user account.  I know the password, but I do not know how to access the files.

  I tried to create a user account on my new HD (with the operating system Windows XP reinstalled) with the same name and the password that I used on my original (with the Windows operating system XP corrupted) HD to create all the document files.  However, opening a session with this account name and password did NOT restore my access to the My Documents folder on my original hard drive.

  I'm out of ideas.  Help, please!

  Hello

  Try the steps from the article below and check out them.
  "Access denied" error message when you try to open a folder
  http://support.Microsoft.com/kb/810881

  You may be interested to have a look at the article below.
  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/kb/308421

• All-in-one HP Deskjet F 4200: how to download the HP software to scan a document and save it to editable word format

  How to download the HP software to scan a document and save it to editable word format in windows 7

  Hi surrendernot,

  It is possible that one) you use different software of scans other than HP software for scanning or b) the HP software is different on Windows 7, on Windows XP, because they are completely different operating systems and may be a more recent version of the software.

  Other methods of analysis lies in this guide to scanning, how HP Multifunction printers - how Scan: Windows 7, you can try scanning without HP software as well.

  I hope that answers your question!

• OfficeJet 4500 G510g: software HP does not work after update recent Windows 8.1

  It is one of the three HP OfficeJet printers, which essentially has the same problem.

  This printer has been in service under window 8 and 8.1 of Windows (and before that, with Windows 7 and Windows XP) and fully functional (even if I only used print and scan with this printer), it is connected by Ethernet to my local network.

  After the recent updates of my system (I've enabled Windows update to automatically install all Important and recommended updates) the HP Solution Center are more recognized this printer.  My first action was to remove the device (using the control panel:connected and printers) and then attempted to add a printer.  Windows adds that a printer has failed.

  My second attempt was trying to add a device.  While that * fact * seem to succeed, the specific printer icon has been replaced by a generic printer icon and control panel:Director something did * not * show the printer in the list of devices!  She has shown a print to the printer queue, however.  HP Solution Center did not always recognize the printer.

  For my third attempt, I went to the HP support site and downloaded all of the following: OJ_AIO_4500_G510g-m_Full_Win_WW_140_408, printing HP and doctor Scan, the diagnosis of HP network and user HP printer Installation Wizard.  Using the full installation package, I uninstalled just the specific printer software first (leaving the solutions, digital imaging and other software in place - they are all used by my other printers as well) then tried to reinstall all the software installation package specific printer could not conclude, as he could not find the printer on my local network!

  Then I ran the Diagnostics of network user and found the 4500 (and a 6000, but not my 6300!  I had not yet done any changes to the installation of the 6300!)  The recommended action is to download the full installation package and run it.  Even if I had downloaded manually, I leave Network Diagnostics continue - download failed before finishing.

  Then I tried printing and Scan Doctor, who took nearly three minutes to tell me that the 4500 was not connected to my network.

  I then used the web server integrated for the printer by opening a browser directly session by its IP address.  The printer is online and processed as expected, but Windows still does bllind to it.

  I then tried installing printer Assistant, but she missed like printing and Scan of the doctor.

  Frustrated, I have re-directed the full installer, but this time after selecting the uninstall, I let him remove all HP software, knowing that I would then need to reinstall all three printers.  I downloaded the full package for my OfficeJet 6310xi and my OfficeJet 6000 - E609a (after checking that all three were supported by HP for use under Windows 8 and 8.1)

  Then I started the resettlement for all three printers procedure, starting with the 6300.  This facility has failed after leaving an Add-a-device shortcut on the desktop.  I tried to use the shortcut to add the printer, but he did not better than my first attempt

  Then I tried with the 4500 and 6000.  Even failure for each of them.

  I uninstalled all three printers, but became suspicious of something else than an obsolete installation package (even if I had downloaded the latest versions on the HP support site!)

  I made one more attempt to install the 4500 - after uninstalling just - and this time he only gave me the option of installing additional software!  Something had clearly been left (probably in the registry) the installation program takes to mean the printer was already installed!  So I canceled the installation attempt and decided to look a little deeper for the remains of pieces of attempts and prinior facilities.

  A search with the found registry editor a few each printer detritus left behind in the registry and search for foud Program Files, a large number of files related to the printers.  I was quite impressed by for each printer uninstall programs!

  In particular, in the SYSTEM ROOT and sections registry have been entered for the Olympic GAMES of 4500 and 6000 JO under the subsections MULTIFUNCTION.  Even administrators system to a Windows system cannot usually change permissions to delete these entries, I left those alone, but I wonder if this is what prevents the installation program to install the printing software.

  It is not only the installation and HP software support which is defective after the recent updates of Windows.  Such widely used and stable programs like Firefox, Thunderbird, and even Windows Explorer has been updated unexplainable in their behavior.

  I am desperate to get my printers fully functional again!  I strongly suspect a compatibility issue, but I really need advice here!

  -Barr

  Thanks again for this detailed information. If you feel my post has solved your problem, could you mark accept as a solution, because it will help others find the solution. Thank you.

• I was working on a document when my computer turns to configure upgrades. When he turned back on my stuff was gone. I can get it or it is lost forever. I didn't save it.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I was working on a document when my computer turns to configure upgrades.  I have not spared the work. can I get it or it is lost forever:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you don't save it, of course it is gone forever. Why the hell not a not periodically save it?

• Failed to open the Works document after Windows Update

  Original title: failed to open the works document, after a month of update.__9 of configuration of microsoft of 350 pages. Help!

  no change...

  Hi SILLIVEN,.

  1. what exactly happens when you open the works document?
  2. do you get an error message?

  Try these steps and check the result.
  Step 1: Update remove recently installed
  a. see remove an update
  b. Once you have removed the update, restart the computer.
  c. open work document and check if the problem persists.

  Step 2: If the problem does not persist after the removal of the update, try to install updates on hold by turning off all non-Microsoft programs and check the result. To do this, try the following steps:
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. install the updates. See the updates Windows Installer
  d. Once you have installed the updates, the article, follow "step 7: reset the computer to start as usual.
  e. check if the problem persists.

  For further assistance on Microsoft Works, please post your request here: http://www.microsoft.com/products/works/support.mspx

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Had to reinstall Creative Suite Design Standard 5.5 after reset of Mac, so I lost all my applications. 3 minutes after completing installation, I get this QUIT SAFARI CLOUD HISTORIC message to complete the installation

  Hello, I bought Creative Suite 5.5 Design Standard in 2012, my iMac had problems for my apple store reset I lost all my applications. 3 minutes after completing installation, I get this QUIT SAFARI CLOUD HISTORIC message to complete the installation, I called Adobe but refer me, it is a forum. I really don't want to pay an extra $ every month I paid for this package, I want to just use it. Can someone guide me how to install best regards, Michel

  Hi Michel,.

  Please open the monitory of activity by going to Applications > utilities on your Mac. You can search any processes with the name of SAFARI COULD HISTO and close it. More detailed instructions can be found here: error with Adobe products: close the following applications.

  Also, make sure you reinstall your CS5.5 disc or direct download. If you use Time Machine or similar backup to restore your programs on your computer reformatted, you may encounter issues. Adobe programs do not correctly migrate due to hidden files permissions.

  Let us know if that fixes the problem reinstall CS5.5or if you need assistance.

  Best,

  Del

• I lost my photoshop elements 8 with windows after a problem with my computer. I have my serial number and that you cannot use my cd.  How can I download this version?

  I lost my photoshop elements 8 with windows after a problem with my computer. I have my serial number, but cannot use my cd. How can I download this version?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• I plan The New School student to use all software of creation of clouds, but I can't open Photoshop in my Mac, today, it is said that it has expired. I tried to redeem or to install again, but it does not work.

  I plan The New School student to use all software of creation of clouds, but I can't open Photoshop in my Mac, today, it is said that it has expired. I tried to redeem or to install again, but it does not work.

  Hello

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Kind regards

  Sheena