lost storage

Similar Questions

• Get error messages whenever I have try to defragment, & I also lost storage space. (less than 1%).

  Original title: memory problem & Defrag.

  I have a problem of the 2 part that has been building.  I get error messages whenever I have try to defragment, & then the Defragmenter stops.  I was just let go of the problem.  But then I noticed that I lost the memory space.  I deleted almost all of the programs that I can, but I still only 277MB of available memory (less than 1%).  I don't know what is using all my hard drive space.  There are only a few programs installed.  I'm also 99% fragmented.  Defrag won't work without releasing the memory of 15%, but even if I HAD the memory, all I ever get is an error message when I try to defragment.  Now, my computer is so slow, it takes about 3 minutes to open a web page.  As it should be obvious, I'm not all that tech savy.  What can I do?

  Right-click your drive (C :) and select Properties, click on disk cleanup, select the file that you want to remove and read the details below.) Put a check mark in the box of files that you want to remove and click OK.

  Now again click on disk cleanup and click on more Options tab ignore Windows components and programs installed.

  Under the system restore click clean up, and then click Yes if you do not experience other problems besides those that you mention in your message.

  Now, try to run Defrag and if you are unable to read the article below.

  http://support.Microsoft.com/kb/922379

• Lost storage functions HA

  Hello!

  I want to know if I missed something in the HA feature.

  I tested

  1. 1 host HA trick works very well (machine starts on another host)
     
  2. Remove all NIC 1 host HA works very well
     
  3. Remove all connectors (on the host) HA SAS don't work
     

  When 3 trials (removal of SAS) all machines that host still respond to ping and VC present them as functional console, do not work. For the HA to start, I turn to the host.

  Is there something to see on it?
  

  I have 2 host connected with 1 storage
  2 each hosts, connected to 1 storage SAS
  HA-host followed activate
  The host isolation response: stop
  ESXI 4.1 433742
  License, Essentials more

  This is an expected behavior - HA has been * no * intended to manage the loss of storage conditions, just because and certain conditions of network partition.  Its not supposed to detect this failure condition.

  Your next question is: ' well, it's ridiculous, how to recognize the loss of storage?

  Answer: upgrade to 5.x - it uses pulses of data store to manage this scenario.

• Storage space lost on my mac

  Today, I tried to install OS X El Capitan Version 10.11.1 with SSD 250 GB 10 Windows via Boot Camp on my MacBook Pro (retina, mid-2012). I had about 80 GB of free and I gave 40 for Windows and 40 GB for mac. I got to step within the training camp where it has partition my SSD, and I left for a few minutes. When I came back my Macbook has restarted. I opened disk utility and I saw that under APPLE SSD SM256E Media, it says 251 GB but under Macintosh HD only 209,79 GB of 47,91 GB of free capacity. It seemed have partitioned but it didn't and that's why I lost storage space.

  

  

  If she has not partitioned, where the missing Go? Why is the 209,79 only one GB of capacity? Please, help me. Thank you!

  Can you post the output of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Personal files lost WIndows Live Mail 2012 Windows 7.

  Original title: JA

  After downloading last update for windows live mail 2012 last week, I lost my personal files. I am running windows 7 and do not want to update to 10 immediately. Any help would be appreciated.

  Hi Julie,.

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have lost personal folders after update of Windows Live Mail.

  Please try to fix your Live Mail by following the steps below:

  1. click on the Start menu.

  2. click on Panel.

  3. click on programs.

  4. click on programs and features.

  5. search for Windows Essentials 2012 on the list and select it.

  6. click on Uninstall/change.

  7. click repair all Windows Essentials programs.

   

  In addition, please try to reconfigure your account. This will refresh Windows Live Mail and can also solve the problem. To do this, please follow the steps in this link.

  You may consult:

  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail-email/how-to-recover-lost-storage-folders-in-Windows/6fa3abe2-865a-E011-8dfc-68b599b31bf5

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• False warning - unable to connect to storage alarm

  Hola

  Recientementen of alerted he configurado the cannot connect to the storage of alarm, para as no. notifique cuando an ESX:

  Pierde conexion al storage: alert

  Pierde redundancia al path storage: WARNING

  Al degradation del way storage: WARNING

  We have received several weather sober varios/place, los esx to con mantienen the alert warning

  Background: gray

  New status: yellow

  Setting the alarm:

  ([Expression alarm event: connection of storage lost;]) Status = Red] OR [expression alarm event: lost storage path redundancy;] Status = Yellow] OR [expression alarm event: path of storage degraded redundancy;] Status = yellow])

  Details of the event:

  Redundancy degraded storage device naa.60060160363027000034c4d090c8e011 path. Vmhba1:C0:t0:L27 path is down. Touch of data warehouses: "VM_xxxxxxx."

  Reportadas cuando comprobamos las LUN paths, amendments seem todas los activas y sin problemas.

  Supongo as haya sido a problema puntial conexion por one of the paths, pero lo know no entiendo porque el not to 'auto-limpian"los los ESX cuando los caminos estan correctos again warnings. Se ha of hacer una config advanced Escalin alerted?

  MUCHAS gracias

  Saludos

  Hola mokymura,

  ES UN normal behavior. Compares lo mismo cuando tienes a grouping y pierdes redundancia of caminos, is is marcado con el WARNING pero los enlaces are themselves well encuentran.

  Este behavior is debe a vCenter as any you can recover el evento what indicates that ha vuelto al estado normal. Debido a esto hay do a manual reset of alarmed her.

  Tripped reset alarms of the event

  An alarm triggered by an event could not settle back to a normal state if vCenter Server does not retrieve the event that identifies the normal state. In this case, reset alarm manually to return to a normal state.

  Page 39 del documento http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-50-monitoring-performance-guide.pdf

  A greeting.

• Path of storage redundancy alert Question

  I have a setup of host to storage path monitor alerts.  The triggers are 'Lost connectivity of storage', lost storage path redundancy 'and degraded redundancy of storage path '.  I have the actions defined to send a SNMP trap once from yellow to red.  The behavior I see is an alert sent to the first problem (of path on the data store 1 failure), but no warning second on the second problem (failure path on the data store 2) – same host.  Someone has this configuration of alerts and you see this behavior?  I can understand why vCenter would send an alert to the front, simply because if we had problems on all 30 data stores on a host that would mean 30 separate alerts by the data store.  Multiply that out on a 8 or 16 cluster node and which would be quite a few alerts.

  Thank you

  We receive alerts for each data store is presented to the host, who is affected.  We had a downtime planned week last with our fabric X on one day and the fabric moving Y next Brocade to cisco.  As soon as the links have been droppped the alarm, kicking and we were informed of each data store.

• Library of photos on external hard drive: not possible repair

  Hello world

  Today, when I tried to open my library of Photos, Photos crashed. After I have reopened, Photos asked that the library must be repaired. I started who, but after 2%, Photos crashed with "an unexpected error has occurred." A restart does not solve this problem. I still can't view the contents of the library package.

  I saw on messages earlier (for example, 10.10.3 Photos can not repair permissions), the output of this Terminal command can reveal the underlying error:

  find ~ $TMPDIR...------(-+ flags sappnd, uappnd, schg, uchg o! - user $UID o! - perm-600 o - acl-) 2 >/dev/null | WC-l

  Outputs this line in my case: 4471

  Please note that I'm storing my photo library, including all images imported into a separate external hard drive connected via USB.

  So perhaps the command above (where I'm not sure what it does) may not be to give the required output to track down the problem.

  Following the crash of the pictures, here is the output of the Console:

  Dienstag, 22.12.15 19:39:22, photolibraryd 504 [1483]: failed to open the library Fotos Library.photoslibrary error: Domain = com.apple.lithium error Code = 303 '(null) '.

  Dienstag, 22.12.15 19:39:28, photolibraryd 720 [1483]:-[NSNull integerValue]: unrecognized selector sent to instance 0x7fff797dc780

  Dienstag, 22.12.15 19:39:28, photolibraryd 722 [1483]: * reason for termination due to an untrapped exception "NSInvalidArgumentException" app,: '-[NSNull integerValue]: unrecognized selector sent to instance 0x7fff797dc780'

  First throw call stack:

  (

  0 CoreFoundation 0x00007fff993b5ae2 __exceptionPreprocess + 178

  1 libobjc. A.dylib 0x00007fff955be73c objc_exception_throw + 48

  2 CoreFoundation 0x00007fff993b8b9d-[NSObject (NSObject) doesNotRecognizeSelector:] + 205

  3 CoreFoundation 0x00007fff992f1601 ___forwarding___ + 1009

  4 CoreFoundation 0x00007fff992f1188 _CF_forwarding_prep_0 + 120

  5 photolibraryd 0x000000010411f2ff _ZNSt3__114__split_bufferINS_4pairINS_10shared_ptrIN2Li6Sqlite9StatementEEEU8__ strongP31LiServiceSqliteNoteBufferReaderEERNS_9allocatorISA_EEED2Ev + 164451

  6 photolibraryd 0x000000010409a414 _ZNSt3__16__treeINS_12__value_typeImNS_4pairIU8__strongP16LiSearchKitIndexU8__s trongP8NSStringEEEENS_19__map_value_compareImSA_NS_4lessImEELb1EEENS_9allocatorI SA_EEE4findImEENS_15__tree_iteratorISA_PNS_11__tree_nodeISA_PvEElEERKT_ + 13196

  7 libdispatch.dylib 0x00007fff9b17933f _dispatch_client_callout + 8

  8 libdispatch.dylib 0x00007fff9b17a926 _dispatch_barrier_sync_f_invoke + 74

  9 photolibraryd 0x000000010409a34f _ZNSt3__16__treeINS_12__value_typeImNS_4pairIU8__strongP16LiSearchKitIndexU8__s trongP8NSStringEEEENS_19__map_value_compareImSA_NS_4lessImEELb1EEENS_9allocatorI SA_EEE4findImEENS_15__tree_iteratorISA_PNS_11__tree_nodeISA_PvEElEERKT_ + 12999

  10 libdispatch.dylib 0x00007fff9b18692e _dispatch_data_apply + 110

  11 libdispatch.dylib 0x00007fff9b18b44e dispatch_data_apply + 31

  12 photolibraryd 0x000000010409a114 _ZNSt3__16__treeINS_12__value_typeImNS_4pairIU8__strongP16LiSearchKitIndexU8__s trongP8NSStringEEEENS_19__map_value_compareImSA_NS_4lessImEELb1EEENS_9allocatorI SA_EEE4findImEENS_15__tree_iteratorISA_PNS_11__tree_nodeISA_PvEElEERKT_ + 12428

  13 photolibraryd 0x000000010414334d _ZNSt3__114__split_bufferINS_4pairINS_10shared_ptrIN2Li6Sqlite9StatementEEEU8__ strongP31LiServiceSqliteNoteBufferReaderEERNS_9allocatorISA_EEED2Ev + 311985

  14 libdispatch.dylib 0x00007fff9b199c0b ___dispatch_operation_deliver_data_block_invoke + 118

  15 libdispatch.dylib 0x00007fff9b184871 _dispatch_call_block_and_release + 12

  16 libdispatch.dylib 0x00007fff9b17933f _dispatch_client_callout + 8

  17 libdispatch.dylib 0x00007fff9b17df6f _dispatch_queue_drain + 754

  18 libdispatch.dylib 0x00007fff9b18463b _dispatch_queue_invoke + 549

  19 libdispatch.dylib 0x00007fff9b17cc87 _dispatch_root_queue_drain + 538

  20 0x00007fff9b17ca34 _dispatch_worker_thread3 + 91 libdispatch.dylib

  21 libsystem_pthread.dylib 0x00007fff9319468f _pthread_wqthread + 1129

  22 libsystem_pthread.dylib 0x00007fff93192365 start_wqthread + 13

  )

  Dienstag, 22.12.15 19:39:28, 723 diagnosticd [134]: error assessment process info - pid: 1483, puniqueid: 1483

  Dienstag, 22.12.15 19:39:28, com.apple.xpc.launchd [1 724]: (com.apple.photolibraryd [1483]) Service was released due to the signal: Abort trap: 6

  Dienstag, 22.12.15 19:39:28, 725 Photos [1785]: error: Domain error Code = com.apple.reddwarf = 504 UserInfo = {XPC = connection down, NSLocalizedDescription = RDErrorServiceCommandNotProcessed} "RDErrorServiceCommandNotProcessed" while trying to open the Library.photoslibrary Fotos

  Dienstag, 22.12.15 19:39:28, 742 Photos [1785]: file:///Volumes/MusicPhotos/Fotos/Fotos%20Library.photoslibrary/ lost connection

  Dienstag, 22.12.15 19:39:28, com.apple.xpc.launchd [1 752]: (com.apple.ReportCrash [1791]) endpoint has been activated through legacy launch (3) API. Please go to XPC or bootstrap_check_in(): com.apple.ReportCrash

  Dienstag, 22.12.15 19:39:29, ReportCrash 190 [1791]: report of incidents recorded for photolibraryd [1483] version 1.3 (350.23.0) to/Users/andrefischer/Library/Logs/DiagnosticReports/photolibraryd_2015-12-22-193 929_Fischi.crash

  Dienstag, 22.12.15 19:39:32, 586 pictures [1785]: connection to the lost storage engine. Recognized user exit.

  Dienstag, 22.12.15 19:39:32, com.apple.xpc.launchd [1 608]: (com.apple.Photos.9632 [1785]) Service came out with abnormal code: 1

  Here is my system information:

  MacBook Air 13 "mid 2012, El Capitan 10.11.2, Intel Core i7 2 GHz, 8 GB of RAM

  I'm not quite desperate, because I'm having several backups of the library (only a few images are not yet backed up). However, also in the interest of others less fortunate that me regarding backups, I would like to know

  (1.) what is the cause of this unexpected behavior

  (2.) what can be done to remedy this.

  Thank you very much in advance, any help is appreciated.

  How the EHD are formatted?  It must be formatted for OS X Extended (journaled) preferable with the property set to be ignored:

  

  You have a backup copy of the library just before this problem started?

  

• Pavilion g6: want to recover the laptop

  Hi I want to do a cover of my g6 Pavilion, I'll have to do it from the recovery disc (D) on my laptop because I don't have it on another drive, or a DVD.

  My questions are:

  -Will I have the original storage on my hard drive (my laptop has a problem, because refreshing after ASR, I lost storage about 40 gig and now it's more than 50 concerts after 4 weeks of having this problem)

  -How do I back up my files during the recovery process, will my computer store on the pc, or should I back up a disk or a USB key?

  -These problems started after someone used my computer. Could this be a virus infection?

  My option is to go to ask the seller to do it for me, but if there is a way I can do myself that will allow me to earn money.

  I have a laptop HP Pavilion g6.

  Processor: AMD A4 - 4300 M APU with graphics Radeon (TM) HD

  Product number: C2N63UA #ABA

  Operating system: Windows 8, 64 - bit

  Thanks in advance!

  HP Recovery - step by step guide

  http://support.HP.com/us-en/document/c03489643

  Buy a 16 GB or higher flash drive.

  You will be able to back up only the files that are there in your libraries.

  I also think the link below would be useful for you to save the files.

  Backup using Notepad files (when Windows cannot open)

  http://support.HP.com/us-en/document/c02970678

  The recovery process is simple, but you can always take a printout of the processs of recovery for reference.

  Come back if you have any questions

• Error: Initiator has tried to get around the security phase, but we cannot

  Hello

  I started working on the new company and tonight we lost storage for about an hour and mistakes came:

  SAN1 storage array error event
  subsystem: MgmtExec
  event: 7.4.3
  time: Sun Apr 21 00:58:18 2013
  "connection iSCSI to target '10.10.10.21:3260, iqn.2001-05.com.equallogic:4-52aed6-cb0bdf198-eee0000000c50212-vss-control' initiator ' 10.10.10.22:53396, iqn.1991 - 05.com.microsoft:sp2 - vm - sql2.company.local' failed for the following reason:
  Initiator has tried to circumvent the security phase, but we cannot.

  On windows this evening first errors began:

  EventID: 4025
  Source: EqualLogic
  connection error iSCSI 0xefff0009 connecting to the vss-control for the 10.10.10.41 group volume

  Event ID: 10
  Source: iScsiPrt
  Logon request failed. The login response packet is given in the dump data.

  These errors I see repetition of the past in the Windows event log.

  It is hyper-v virtual SQL cluster with iSCI Dell storage connection.

  How to solve this problem?

  Thank you

  Hello

  Vss control volume, which is used my MS Volume Shadow service to access the clichés of material, there's a GUY configured username. However, the initiator does not send a name of user and password c...

  If you use the EQL TYPING kit, then you should allow these servers access to this volume.  Or change the ACL on this volume to allow that the servers that need to access.

  Alternatively, you can remove it from the Favorites tab, so that he tries to log in the next time the server starts.

  Finally, you can enable the discovery of prevnet filter this of is re - produce.

  Here is a KB from the Equallogic Web site.

  Solution title error: "initiator wanted to ignore the security phase but we can not." or "initiator has tried to circumvent the security phase but we cannot."

  Symptom of solution of details: event on the web interface of PS log table shows a connection error for a volume that says: "initiator wanted to ignore the security phase but we cannot." This error can be repeated continuously every few seconds.

  Question: by default, volumes that have enabled CHAP authentication will be shown during the process of iSCSI discovery even if the initiator does not have the authentication information c. Discovery is controlled by its address IP ACL, so if a machine matches the IP address of the ACL scope, we will see the volume. Note that multiple initiators such as those that are unix based as the initiator of the Cisco software that uses VMWare will continue to attempt to connect to the target (often, every two seconds), even if each connection attempt fails. This can fill the paper and the performance of the server can have an impact.

  Solution: Limit the discovery of volumes CHAP authenticated by IP address and ensure that only servers with appropriate credentials CHAP can observe the volume at all.

  The most common volume to see this error on is the special volume named "vss control." This volume is for communication with Microsoft's VSS service, using EqualLogic host integration tools. If it is configured for unlimited access, or is configured for the CHAP only, then each initiator on the SAN will be able to find out and may attempt to use it. Set ACL "vss-admin" to enter an IP address for each machine that needs to access, to ensure that no one else does.

  For firmware version 2.2.3 and, before going to the volume named 'vss-control', select the Access tab and change the entries here in a proper way.

  For the later version 2.3.2 (including all versions 3.X) firmware, go to the Configuration Group box and select the VSS/VDS. It's the ACL for the vss-control volume, which you should change as appropriate.

  It may be necessary to restart servers that try to access this volume after changing the ACLs, however. Some initiators do not release a target once they have discovered, even though the table indicates that the target does not exist. An example of this are ESX servers, using the software initiator.

  A second scenario may be a volume that is configured to be seen from in a VMWare server VM Windows using CHAP credentials and also install on the table to use a single connection Cap. Even if the credentials CHAP is setup correctly on each side if the ESX Server uses the software initiator that ESX will attempt to connect to the volume permanently every minutes or seconds depending on factors both. With configuration to several volumes in this way, it can be a drain on performance on ESX.

  To troubleshoot this scenario make sure to activate the iSCSI discovery of the IUG table of PS filter. This is done from the Group/iSCSI Configuration tab. check the box off and save the configuration using the Green disk icon in the upper right of the graphical interface. This makes the servers with the initiators that are correctly setup to see a volume with CHAP will see and try to connect to these volumes. Note: once an ESX Server has seen a volume to continue to try to connect with the software initiator until the ESX Server is restarted after this option is turned on.

  Note that, since the version of the firmware 3.0.5 and later, you can require authentication for CHAP-enabled volumes during discovery, by issuing the command in the CLI:

  GroupName > enable discovery-use-chap grpparams

  Kind regards

• My PC worked on Windows 8.1 with update 1 for some time, but is now back at the origin of windows 8.

  Original title:

  Derrick

  My PC worked on Windows 8.1 with update 1 for some time, but is now back at the origin of windows 8.

  I "lost" my Live Mail access and access to the photos.

  The version that it came loaded a whole mass of tiles/apps that I didn't need and I lost a number of applications and shortcuts, I had.

  How can I go back to the situation, I got up to 4 days ago please?.

  Derrick.

  Hi Derrick,

  You can manually check and install updates through Windows Update.

  Once the updates are made, you can install from Store Windows 8.1.

  For storage on Windows Live Mail folder, you can try the suggestions of the post http://answers.microsoft.com/en-us/windowslive/forum/livemail-email/how-to-recover-lost-storage-folders-in-windows/6fa3abe2-865a-e011-8dfc-68b599b31bf5

• Backup & Recovery in virtual environment

  Hello

  I need help to establish a good Backup & Recovery Strategy for VM-Ware with Oracle databases.

  Currently we use veeam backup the entire Virtual Machine during the night maintannce-window. On the virtual machine, we use RMAN to back up the databases, archivelogs fall under the machine.

  My problem:

  -If the virtual machine failure during the day, for example 16:00, cause of lost storage / instant failure that blocks the machine - I lose changes all day.

  So, where is the best place to save the logs to check-in during the day and how do I recover after an accident mentioned above? First step would be to recover the virtual machine with veeam, but subsequently? The database do not know what archivelogs were written, cause it contained last night?

  Thanks for your help.

  PS, we got the problem of the snapshot-crash on another machine, so it's really a thing that can happen.

  User106somethingorother,

  If you want to be able to recover in the case of the virtual machine / virtual disks are gone, you must ensure that your backups and archiving logs copied somewhere else.

  The users guide backup and restore (available at http://docs.oracle.com) would be the place to go to find out how to recover the database in many different scenarios, including one where you have lost direct control files and RMAN would therefore know about archiving logs is available.

  Kind regards

  John

• New on vcops 5 having problems with its imperfections

  Hello

  I test in a small environment (cluster 4 knots, about 50 VMs) just to dig and learn.

  Last weekend we had a power outage due to snow in the city, guests have more redundancy in the storage Bay.

  The problem has been resolved but the vCenter Operations Manager still shows 0 health and 100 flaw say "lost storage path redundancy.

  How can I get rid of this error in the interface? The location is good, I expect vCenter Operations Manager to retrieve automatically, but is not.

  Thanks for the help.

  1) go to the 'Alerts' of this CR tab.
  (2) in the grid of alerts, look for the corresponding fault alert;

  3) there is a Cancel button (5th button from left to right). It only works for fault alerts

  (4) select alerts in the grid, and then click Cancel - defects should disappear and restored to normal health.

• Storage lost after updating to iOS 10

  I feel a little lost. I read that the update of iOS 10 should provide more free space on my phone.

  I did more than 1 GB free on my phone before updating to iOS 10. Now, after update, I have 50 MB of free space. And I can't find the reason for this. The only explanation is the update of iOS.

  This has happened with anyone else? How can I solve this?

  He immediately resolve starting with the settings > general > storage & use iCloud > manage storage (in storage).  It lists your large space users.  Begin to remove immediately, that you do not have your iPhone to work at all with so little free space.

  You need a minimum of 10% of the total space of your free device.

• I lost my phone and when I got my new one I downloaded my photos on the cloud. My storage is still listing my old phone do I delete just and doesn't affect anything else?

  I lost my Iphone and buy a new. I uploaded my photos to the cloud. When I look at my storage it still shows the old phone. Can I just remove and not screw up anything else?

  Where you're looking, you're talking about see the iCloud upward from the old phone.