LOV using personaliztion is not return a value.

Similar Questions

• Popup LOV does not return a value in editable tabular report

  I'm having a problem with a Popup LOV in a report updated in table form. When you select value, the popup remains and the value is not returned to the element. I guess that's because the popup does not know which element to fill? I don't know how to fix.
  
  [http://apex.oracle.com/pls/otn/f?p=4000:1500:1011573666262225:NO:]
  
  workspace: csd_apex_demo
  user name: demo
  password: demo
  application: 35976 - Jason demo
  page: 3-1 report
  
  Thank you
  
  Jason

  Looking more closely, I see that you mix display_and_save with popup_from_lov. The p_item_id parameter seems to have no effect on the generated javascript code and I think that javascript doesn't work, but not like you might expect. If you use Firefox with Firebug you can inspect the items and watch what happens when you click on an element of the pop-up window. It is by the way of the return value, but it is stored in the first element of display_and_save line which is a named element f08 hidden. All the items are named f08 in this column as a result of your use of the p_idx = 8. But the javascript code to handle the valve of the popup is generated once and so is assuming that it is zero array position. He uses the name attribute and no id and I suspect that it is followed by the line number in their own country (IE in the popup_lov procedure).

  I don't see how to change the way the javascript code generated here then perhaps another solution is needed. I guess that display_and_save is used here so that you can coordinate the f08 array that is posted, but there is no process here "send" to confirm that this is your intention.

  If you remove the display_and_save and just see the 'reason' the works of popup. If you change the popup to something other than p_idx = 8 it will work also. But now we must find a way to align the line ID is displayed.

  There are several ways to coordinate the shipment but they will in part depend on if you want to display only one line of a popup lov field or several lines. I would like to know where you go and I can help you set up the form and submit processes.

  Greg

• Guest user does not return a value

  I have a user prompt dialog box which is a slightly modified version of questioning the standard user to enter VI express. I tried to change the VI so that it would allow the user to close the command prompt by pressing the enter/return key. The final objective is to have the popup dialog, the user will scan a bar code and barcode reader adds a carriage return, automatic closing of the dialog box character.

  I have followed this user lyrics: https://decibel.ni.com/content/docs/DOC-13973. The only difference between my code and the code it is that my user dialog box returns a string instead of a number. See below for my code.

  

  

  The problem that I am running is the string "Item number2" never really returns any value once it's called. The indicator on the front panel of the updated the express vi displays the correct value after you run, but the value is never returned to the VI, who called the dialog box. The express vi the value default value is successfully returned. The only change I made was the addition of the structure of the event, so I have to assume that my code does not go inside this node.

  Any thoughts are appreciated.

  Adjust the chain drive on 'Update value then of the hit'.

  

• Changing the values in drop-down list in the event not return current value

  Hello

  I have a combo that I'm filling using javascript according to the post by Brad here http://blogs.4Point.com/Brad.White/2010/03/populate-a-drop-down-with-a-Web-service-in-a-PD e.html .

  I hooked the change event from the drop-down menu to display the new selection in a separate as text box below

  ApplicationForm.Page1.ddlUsers::change - (FormCalc, client)

  txtSelected.rawValue = ddlUsers.rawValue

  This code works, but shows the previous values (or the last) that has been selected in the drop-down list, but not the current value, which has been selected by the user. I also tried to use selectedIndex rather rawValue on ddlUsers but it has the same behavior. "Commit on" from the drop-down list is set to "SELECT".

  Am I missing something here? How can I get the current value is selected in the drop-down list.

  Thank you

  Marie Pascale

  Hi Carole,

  I didn't look at the blog, but the most appropriate property for use with the change event is xfa.event.newText instead of .rawValue.

  Thus, as the Javascript:

  txtSelected.rawValue = xfa.event.newText;
  

  Hope that helps,

  Niall

• LOV does not return a value

  Is there a problem with Apex v 3.2.1 or bug known?
  
  I have a LOV extracting data using the following code:

  SELECT FULLNAME d, ID r
     FROM EMPLOYEE
     WHERE TERMDT IS NULL
  ORDER BY 1

  In the EMPLOYEE table, the FULLNAME column is filled, and the ID column is PK if she is too populated.
  The form on which is the drop-down list uses this LOV works for each record in the table, with the exception of 2 folders that I have validated so far. Col TERMDATE is null for all records.
  
  Names that do not appear in the list, but by choosing them - ID data the value zero.
  
  I looked at the records and I see no problems with the two records that return null ID-
  
  Rich

  Hi rich,

  When the document is returned to
  Susan Manszo

  JavaScript throws this exception:
  "XML Parsing Error: not well-formed location: http://apex.oracle.com/pls/apex/wwv_flow.show line 1, column 86 number:this XML genericly defines several elements GPI & QE James Marhoefer

  You have probably escape & in GPI & QE?
  {code}
  GPI & QE => QE & GPI
  {code}

  You can check your file xml here
  http://www.w3schools.com/DOM/dom_validate.asp

  With * & *-parser error.

  If you delete * & * or escape - no error.

  Kind regards
  Lev

  Published by: the on December 9, 2010 16:26

  Published by: the on December 9, 2010 16:48

• Pop - up key LOV (description of the poster, returns the value)

  Hello
  
  I use this built in functionality to display data from a table, a very simple, just the id and name. Well, it shows me the ID number, the KP but not the name of the Agency
  
  Select * Agency
  
  It restores 1, 2, 3, 5, 4 (so the PK disordered instead of the column name) then I tried SELECT name of the agencies and again it returns me these numbers. I have developed a huge headache, faced with this. I'm doing exactly as in the demo
  
  I chose popup Lov key displays a description...
  
  then in the Source I tried first as in the example
  
  Only when the current value in session state is set to zero + static assignment value corresponds to the source attribute
  
  and I also tried
  
  always replace an existing value and a column of data
  
  and I also tried this trick of adding values static lov.
  
  nothing, at least I get the PK disordered poster.
  
  Of course, if I run it childish query select * from agencies in the sql script, it displays the table very well but when I try to get this value from the popup selector, it will not
  
  I must say that I have included this function within a form, so that the user who fills the form can click on the popup selector to select a value instead of enter manually (to avoid data inconsistencies)
  
  Does anyone know why this strange thing?
  
  Thank you very much
  
  Alvaro
  
  Published by: user12155340 on November 15, 2009 09:21

  You must rename the agency_name and the agency_id according to your field name in the table. and so the name of the table.

  the syntax must therefore

  Select display_value, return_value from by asc

• Gauss hypergeometric function does not return a value

  I need evaluate the Gauss hypergeometric function (mathematics > elementary > hypergeometric functions > Function.vi Gauss) for one of the following constants:

  a = 11/6

  b = 1/6

  c = 5/6

  for different values of x, all of which are negative.  A value of x is - 4.  When I run a VI with this function, it returns NAN.  I don't know what is current as the help file says the function is set to leave Neg. infinite to 1.  A condition is placed above being defined more precisely to 1 which I'm not interested.

  We used a script MATLAB Labview node to calculate these values successfully.  I know that some other programs can only calculate the function for | x |< 1,="" but="" the="" help="" file="" in="" labview="" claims="" it="" doesn't="" have="" this="" limitation="" as="" is="" the="" case="" with="" matlab.=""  can="" anyone="" else="" confirms="" this="" problem="" or="" am="" i="" just="" overlooking="">

  Also, it would be useful to check with Mathematica to verify that I did stupid miscalculation...

  Third time is a charm.

• Case in SQL condition does not return the values as expected

  Hello gurus of PL/SQL,.
  
  SELECT amd.brkr_nm, amd.brkr_sym, AMD.MINORITY_FLG, atdf.comm_brkr_dim_key, atdf.exec_brkr_dim_key,
  WHEN atdf.COMM_BRKR_DIM_KEY = AMD.ACCESS_METHOD_DIM_KEY - CASE THEN
  WHEN AMD BOX. MINORITY_FLG = 'Y' THEN
  CASE WHEN atdf.EXEC_BRKR_DIM_KEY = atdf.COMM_BRKR_DIM_KEY THEN 'Done' ELSE 'InDirected.
  END
  ANOTHER "NA".
  END
  ELSE ' 0'
  END
  AS Direction_Method
  Of
  alloc_tran_det_fact atdf,
  ACCESS_METHOD_DIM AMD
  
  But it returns me the 0 value in the Direction_Method field. But when I checked the values in DB then my first condition (atdf.COMM_BRKR_DIM_KEY = AMD.ACCESS_METHOD_DIM_KEY)
  second condition (AMD. MINORITY_FLG = 'Y') and third (atdf.EXEC_BRKR_DIM_KEY = atdf.COMM_BRKR_DIM_KEY) condition of all them have passed, then it should show the value as indicated, but it is shwoing the '0' value only in the Direction_Method column.
  
  Kindly help me.. .am I missing something?
  I use Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production. I can't create the test data in the database, I did not have the required privileges to make :(
  
  Kindly help me, thnanks in advance for your time and your comments
  
  Published by: user555994 on May 24, 2012 02:00

  could be a space or case (upper or lower case). Try:

  /* Formatted on 2012/05/24 16:00 (Formatter Plus v4.8.8) */
  SELECT amd.brkr_nm, amd.brkr_sym, amd.minority_flg, atdf.comm_brkr_dim_key, atdf.exec_brkr_dim_key,
         CASE
           WHEN trim(upper(atdf.comm_brkr_dim_key)) = trim(upper(amd.access_method_dim_key))
             THEN CASE
                   WHEN trim(upper(amd.minority_flg)) = 'Y'
                     THEN CASE
                           WHEN trim(upper(atdf.exec_brkr_dim_key)) = trim(upper(atdf.comm_brkr_dim_key))
                             THEN 'Directed'
                           ELSE 'InDirected'
                         END
                   ELSE 'NA'
                 END
           ELSE '0'
         END AS direction_method
    FROM alloc_tran_det_fact atdf, access_method_dim amd
  

• pageContext.getParameter in processFormRequest in CO does not return a value

  Hello
  
  It seems that fields that are not rendered cannot be retrieved using pageContext.getParameter.
  I found a thread where it helps that a field must be ' Read Only: False' for this, but my fields are read-only: false.
  Is there another setting that should be set?
  The fields are messageTextInput style.
  
  I tried with setting the rendering and then they I get a value.
  
  Or I have to use something else for these areas?
  
  Thanks for your help
  
  Ronny

  Hi Ronny,.

  FormValue style is to hide the element on the page. Even if its form value, we must set to true so that values lies in the field.

  Region style header has nothing to do with the field hidden.

  Thank you

• CFCalendar does not return a value selected

  My host is running CF8, and I'll build a Web site for the company of my wife.  I try to use cfcalendar to allow customers to choose the dates of appointment, but I'm having a problem.

  I guess you get the selected date by submitting the form and looking at #FORM.calendarname # (where calendarname is whatever the name = attrib the cfcalendar tag).

  I use it in a form with format = "html" which is supposed to be allowed, but the form returns nothing.  If I turn it on format = "flash" then it works fine.

  Is it possible to make it work with an HTML form?  I really don't want the entire form to be flash (not to mention I heard flash forms go far in future versions of CF).

  I think you have found a bug.  Remove the ID attribute of the CFFORM Tag, then it works.

  You need to trigger the bug here:

  http://cfbugs.Adobe.com/cfbugreport/flexbugui/cfbugtracker/main.html

  Report with the ref of bug, let people know where he is and may vote in its favour.

  Also: as a general rule, it's a bad idea to have a submit with a button 'submit' name.  It can collide with JS that is based on the method of the form object submit().  It's nothing to do with your question here, but just something to remember.

  Insofar as the thing in JQuery, I guess that I do not use that because I don't know the first thing about JQuery, LOL!

  Same as everyone before they start with him then.

  --

  Adam

• Editor does not return a value

  10.1.3.42.70 ADF business components
  JHeadstart 10.1.3.3.81
  
  all,
  
  I use the "editor" display type in my def. app when I use the product page the editor préremplira value w / the appropriate, but when I hit the button, the value in the editor does not the text box. someone at - it else knows it?
  
  Thank you
  Paul

  Paul,

  It is indeed a bug in the EditorItemBean. You must override the method in EditorItemBean and change the line

  If (returnEvent.getSource () .equals ("OKButton"))

  in

  If (returnEvent.getReturnValue ()! = null)

  This is necessary, because otherwise the Cancel button will not work as it should (it will always save the value silently on the bottom).

  Thanks for finding this bug! The patch will be included in the next version of JHeadstart 10.1.3.3; but the substitution function will fix this bug as well.

  Kind regards
  Evert-Jan de Bruin
  JHeadstart team

• Works do not return correct value

  Hello

  I have a function that is passed into a work of identification.  The function will be watching the ID for this work and compare them to a table.  If at least 1 id does not exist in this table, I need the function returns 0.  If each id exists, so I want to back a 1.  I thought I had work because he worked in a few tests, but it does not work for the current situation.

  create or replace FUNCTION JOB_CHECK
  (  
    P_JID IN NUMBER  
  )
  RETURN NUMBER
  AS
    VSTRING CLOB ;  
    TABV UTL.TYPWORDS ;  
    NCHECK NUMBER := 1 ;
  BEGIN
    SELECT VID INTO VSTRING FROM WorkJOBS WHERE JID=P_JID ;   
    TABV := UTLPKG.SPLIT(VSTRING) ;
      
    FOR I IN TABV.FIRST..TABV.LAST LOOP    
      SELECT 1 INTO NCHECK FROM JOBS_LIST WHERE VID = TABV(I) ;         
      RETURN NCHECK;
    END LOOP ;
    
    EXCEPTION
      WHEN NO_DATA_FOUND THEN
        RETURN 0 ;
  END JOB_CHECK ;
  

  What's happened is that we removed our job_list table IDS then any work which is verified with an old ID I want to report.

  Thank you.

  At least put the oudside loop back:

  END LOOP;

  RETURN NVERIFIEZ;

• orgvdcnetwork.toAdminObject () does not return correct value

  Nice day

  When I run the orgvdcnetwork.toAdminObject () method, I get the error "resource not found". In the error message, it includes the href that cannot be found. It seems that "admin" is written twide in this url. Is there a way to get around this?

  The error is also present on the action System.getModule("com.vmware.library.vCloud.operation").toAdminObjectOrgVdcNetwork)

  ' https://vCloudCell.local/API/Admin//network/50599c9b-2576-4b7f-b5a4-a068b37350be admin'

  It is indeed strange that you get an admin url in a non admin object.

  I found my way to obtaining the admin VDC Org networks directly with the query service:

  var queryService = host.getQueryService();
  var expression = new VclExpression(VclQueryOrgVdcNetworkField.NAME, Network_Name, VclExpressionType.EQUALS);
  var filter = new VclFilter(expression);
  var params = new VclQueryParams();
  params.setFilter(filter);
  var oNetworks = new Array();
  var resultSet = queryService.queryRecords(VclQueryRecordType.ADMINORGNETWORK, params);
  while (resultSet != null)  {
      var records = resultSet.getRecords(new VclQueryResultAdminOrgNetworkRecord());
      System.log(records.length + " Org VDC Network record(s) found");
      for each (var record in records) {
          var onetRef = new VclReference();
          onetRef.href = record.href;
          onetRef.name = record.name;
          onetRef.type = record.type;
             oNetworks.push(host.getEntityByReference(VclFinderType.ADMIN_ORG_VDC_NETWORK, onetRef));
      }
      resultSet = resultSet.getNextPage();
  }
  adminOrgVdcNetwork = oNetworks[0];
  

• StartAsyncTask using and obtaining a return value

  Hello

  I'm just starting to try and learn LUA and all Lightroom SDK.  Here is a sample of my code:

  local lrApplication = import "LrApplication".

  local LrTasks = import "LrTasks".

  local activeCatalog = lrApplication.activeCatalog)

  local currentPhotos = activeCatalog:getMultipleSelectedOrAllPhotos()

  are there local = LrTasks.startAsyncTask (function () return currentPhotos [1]: getFormattedMetadata ('fileName') end)

  wheneven check or try to use y sucks.

  Please someone tell me the stupid thing, I am doing wrong so I lose more hair decrease.

  I know that currentPhotos has 5 photos in its collections, because later I do this:

  because me, I onePhoto in ipairs (currentPhotos)

  and he travels 5 times, matches to the top for the number of photos in the folder I selected in Lightroom.

  Thank you.

  Start-async-task does not return a value, it just schedules a task and keeps going on - the job runs later.

  In general, it is best to start a task immediately in response to a menu button or press selection... and everything in this task. -then you don't need to start anywhere, unless you need it like real parallel processes, such as background tasks.

  To avoid multiple tasks from due to asynchronous events, use a form any to avoid recursion.

  Rob

• Need help: not prepared statement to return the value:

  Hi refugees,

  In LICS, prepared statement does not return any value...

  This is the code...

  String p_person_id = pageContext.getParameter ("person_id");

  Connection Conn = pageContext.getApplicationModule (webBean) .getOADBTransaction () .getJdbcConnection ();

  String payment_query = "select max (payment_date) in the xxbdf_payslip_detail_mv where assingment_id = (select assignment_id from the people_reporting_info where person_id ' + p_person_id + ') ';

  PreparedStaement stmt = stmt.executeQuery ();

  ResultSet rs = stmt.executeQuery ();

  While ((rs! = null) & & RS.) Next

  {

  java.sql.Date sql_date = rs.getDate (1);

  SOP (SQL_DATE)

  / * I tried this also * /.

  java.util.Date util_date = rs.getDate (1);

  SOP();

  String string_date = rs.getString (1);

  SOP();

  }

  and I have to format the date as "DD-MM-RRRR.

  Please give your valuable suggestions refugees...

  Thank you

  Jaya

  Jaya Hey,

  Write the code below in the PR

  Code for the prepared statement

  
  

  String PaymentData;

  String p_person_id = pageContext.getParameter ("person_id");

  System.out.println ("The person Id is" + p_person_id); check the id of the person should not be null.

  try {}

  Connection Conn = pageContext.getApplicationModule (webBean) .getOADBTransaction () .getJdbcConnection ();

  String query = "select max (payment_date) in the xxbdf_payslip_detail_mv where assingment_id = (select assignment_id from the people_reporting_info where person_id ' + p_person_id + '); '

  PreparedStatement stmt = conn.prepareStatement (Query);

  ResultSet = stmt. ExecuteQuery();

  While (resultset.next ())

  {

  PaymentData = (String) resultset.getString("payment_date").toString ();

  }

  Conn.Commit ();

  }

  catch (System.Exception e)

  {

  e.printStackTrace ();

  }

  See below the Code for the Date Format Conversion

  
  

  cabu.ui.validate.Formatter formatter = new OADateValidater (PaymentData, "dd-MMM-YY" "");

  Thank you

  Dilip