CUT or not? (MX200 essential 500 GB)

Similar Questions

• You just edit Contacts in GMAIL and I can not restore my contacts from the previous version. I followed your instructions, but it has not restored nearly 500

  You just edit Contacts in GMAIL and I can not restore my contacts from the previous version. I followed your instructions, but it has not restored nearly 500 contacts that I have that are in other contacts.

  Hi robertsjohn125,
  Contacts are not supported in Firefox, unless you take on Firefox Desktop and Hello of Firefox?

  Where to manage your contacts, this might help to direct you to the correct support.

• WD My Passport Essential 500 GB USB 3.0 - not recognized on XP family 32-bit PC

  Desktop desktop PC computers, vista 64-bit bus + XP Pro 32 bit, both recognized as the USB HD Western Digital has tried everything they can and notify refers to Microsoft. Help, please!

  Hi maryeo1,

  • When was the last time that the external drive is recognized by the computer?
  • Did you the latest changes on the computer?
  • What happens when you connect the external hard drive to the computer?
  • You are able to access the other USB devices on the computer?

  Method 1

  See the Microsoft article below and run the fixit tool available, check if it helps.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Method 2

  If the above step failure then check out the link below and try the steps mentioned, check if it helps.

  External drive WD, a drive letter is not assigned by Windows or Mac OS x and the data on the disk are inaccessible

  Hi, Halima, tried the two 1 + 2 method. No joy.  To answer your questions:

  • When was the last time that the external drive is recognized by the computer?  Not recognized for the first time.
  • Did you the latest changes on the computer? No.
  • What happens when you connect the external hard drive to the computer?  "Unrecognized USB device. One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. "
  • You are able to access the other USB devices on the computer? Yes, OK on USB PC camera and three other player flash of 4 & 8 GB.

  Hi Halima, problem solved. Got a confirmation of my small voice try a USB port at the back of the PC, from the front two, it didn't work.  And, Viola! Nice day. Namaste.

• Copy/cut does not work on Windows 8.1

  I upgraded to Windows 7 (where the FF worked fine) to 8.1 Windows a few months ago. After upgrade FF stops working well enough for me to use. I opted for Chrome/Opera, but I'm tired of this and want to come back to FF but am it is very difficult. The questions are

  - I can't copy/cut anything via either Ctrl+C or the context menu. The context menu rarely will show Copy/Cut/Paste and if they are shown they do nothing. One time I pressed crtl+C a lot ina row and Copy worked for that session but when I restarted the browser it stopped working again.
  

  These may or may not be linked to the question of copy/cut, but certainly do not work as well.

  -  Sometimes the context menu will show every possible menu item ever available in the OS. I'll right click and I need to scroll and scroll to find copy/paste. They still don't work when I find them.
  - I can't highlight text and have the context menu show the "search google" button. Nor can I take that highlighted text and drag it to the URL bar/search bar.
  - If a video is playing (youtube/comedy central...) and I drag that tab out to make a new window this creates a blank "New Tab" in the original window and make it look like the video tab is moved to a new window but the video won't play any more. Nor can I stop it. and I can't close that tab by right clicking. But I can Ctrl+W it but that doesn't stop the audio. The audio will continue until I close FF entirely.
  - Middle click used to not work but now usually works. i.e I used to not be able to close tabs or open links in new windows with middle click. But FF 28 seemed to fix that. Again mayeb/maybe not related.
  

  I am running FF 29 but these questions were all present for the latest versions of ~ at least 4 (all that was last fall). I use FF sync and everything works fine on all my devices synced running W7. It is the only computer that I have W8.1 on so I can't test another 8.1 installation. I uninstalled and reinstalled several times but I don't think that I have deleted all my personal computer setting. I have a few extensions (Adblock more 2.5.1 all-in-one genstures 0.26, Rainbow 1.6, more Smart Bookmarks bar 1.11, 1.0alpha18 of Stumbleupon and TiddlyWiki). They are all also synced on my other computers.

  Any ideas?

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• HP Pavilion 500-314: IDT High Definition Audio works do not (HP Pavilion 500-314)

  Hello.  I have a HP Pavilion 500-314.  It works on Windows 10.  My audio worked fine until I had to reset the computer after my computer went into a loop of "prepare the AutoFix.  Once I reset the computer, there was an 'x' next to the small speaker icon in the lower right corner.  When I move my mouse over the "speaker" icon, he says "no speakers or headphones are connected.  It drives me crazy that the other posts about the IDT High Definition Audio did not work.   I would appreciate a quick response.  Thank you for your time.

  Shayna - Ghram-Kaiser

  Hello:

  Given that I don't know what other posts read you about it, what works for most forum members is to install the audio driver IDT W8.1 support page and the driver of your PC.

  This package provides the Audio IDT high definition (HD) to support of office models that are running an operating system supported. -Provides the models of desktop audio driver version and supported operating systems.

  File name: sp65946.exe

  If you have already done this and it has not resolved the problem, unfortunately I don't have any other suggestions for you to try.

• Qosmio G30 - RAID may not reflect new 500 GB HARD drive

  I have installed 2 new identical 500 GB hard in my Qosmio G30 with Windows XP.

  The system works well, but the disc cannot be mirrored. Report of the Raid Controller is 'Normal Operation status.

  This disk cannot be used for mirroring because it is outside the management of the RAID."

  Who can tell me whether it is a disc error or is the drive of 500 GB to big for the toshiba with Windows XP raid controller?

  > Can anyone tell me if it of a disc error, or is the drive of 500 GB to big for the toshiba with Windows XP raid controller?

  Hmm. I m not very good, but it could be possible that the 500 GB HARD drive is too big for the mirroring of the mode.

  But have you tried to change the mode in comforter Toshiba RAID you might find in Toshiba Assist-> Protect Fix & -> RAID Console

  Check if you can switch to the mirroring.

  By the way; RAID-1 is defined in the BIOS?
  Usually, when you use RAID-1 configuration, the RAID is set to mirroring. In this case, the operating system recognizes the reduced ability to both hard drives (in your case, it is not important since you are using the two 500 GB HDD).

  Check it!

• Press does not not on Ideapad 500-15

  Hi people

  I have a brand new 500-15 i use in recent weeks.

  Today, the touchpad has stopped working. An external mouse works fine, but nothing on the touch pad. I rebooted as well - but it did not help.

  Can anyone suggest what can be done?

  (I actually get disappointed with this high-end laptop... I had problems of graphic drivers as well, that I had to bring myself)

  Hello

  Yes, it's the 500-15ISK

  I really did not solve it, but after trying to update the drivers manually by using what has been on the Lenovo site, then fron Synaptics site - I finally solved this problem to roll back the driver and then auto-updated drivers, and then she returned to the lif

• New installation of XP PRO sp3 does not recognize the 500 GB HD

  OK, here are the details:

  System: Computer PORTABLE of Acer Aspire 1700 Pent4, 2 GB of RAM, 80GB (3.5 "full-size, trainee) IDE HD [this is the original HD on this laptop of size important which is designed to use disks 3.5" hard].

  Initial situation: Windows XP Pro (SP3 integrated) installed on HDD of 80 GB and works without poblems. BIOS does NOT show the ability of the intern HD in the BIOS screen. BIOS reports only the model and the serial number of the HD, and there is no options to specify the HD type/format (e.g., MLA, etc.)

  Available: Win XP Pro bootable CD slipstreamed with SP3; It is tested and verified work well to install PC or laptop!

  When running XP Pro on a partition internal 80 GB HD, and when I join a brand new WD 500 GB IDE HD via USB, HD is recognized correctly. I can partition and copy data on the HD 500 GB with no problems!

  When I replaced the old 80 GB HD with the new HD 500 GB HD interning on the laptop, I have the following problems:

  1. I can NOT boot into Windows XP Pro (SP3) which was Ghost on the HD 500 GB of the old 80 GB portable HD it recharges, and if I try the console recovery or secure boot, then the laptop restarts also.
  1B. I have Ghost xp partition to 80 GB HD to a piece of spare HD (40 GB) and replaced the 80 GB with the 40 GB HD and was able to start the laptop without problem. So the problem is NOT related ghost!

  2. I can't perform a clean install of Windows XP Pro (SP3 integrated) because Windows XP Setup recognizes the HD 500 GB GB 131 HD. Therefore, the remaining capacity is not recognized.

  3. I can NOT perform the installation of Windows XP pro (SP3 integrated), even if I have previously partition new HD 500 GB by attaching it to a free desktop PC and use Partition Magic, partitioner of Paragon Disk or other partitioning tools. After partitioning prior, when the 500 GB HD is installed on the laptop (as a trainee HD), then win xp installation lists quality HD of GB 131 and lists the existing partitions as corrupt!

  4. Curiously, if I use Knoppix, Debian, Ubuntu or linux boot CD Mint and start the laptop computer with one of these linux distributions, then the linux installer recognize the HD properly during the phase of recognition of material and later during the phase partitioning HD, the linux system to report a full capacity of 500 GB available for partitioning. In addition, when there are partitions, partitioning linux program then lists these partitions properly as well!

  Considering the 4 points and especially MS Windows XP PRO (integrated with SP3, which should recognize HD with sizes exceeding 137 GB limit - from MS says you must be at least XP SP1 to overcome the size 137 GB limit - and that the different distributions of linux can see the full-size HD 500 GB with no problems) which is exactly the problem with Win XP? Why it does not recognize the full capacity? And how to win xp recognizes a 500 GB capacity, if the new HD is attached to the laptop via USB as an external drive when running XP PRO (SP3) of the 80 GB internal HD?

  so... Can anyone sheds light on the issue with Win XP Pro installation on HD 500 GB IDE?

  Nicely,

  LO

  Hi Palcouk and Doc,

  I think that's the final answer!

  Although, there is a mixture of simple to complex responses to the problem at hand, what it all comes down is that there is a significant difference between the installation of Windows XP and Linux installer program. The XP installation program needs help from the BIOS to deal with HD, and if the BIOS does not support, XP not has no facility to remedy the situation. OTOH, most of Linux new kernels rely on the BIOS for a limited number of extended, but communicate directly with the hardware, in this case, with the HD and therefore manages the material accordingly.

  It seems among users of dual-booting (win/linux) using old PCs, it is a matter of very pretty. What they end up doing is using the first 137 GB that is seen by the BIOS without problem for XP (either as a single partition or divided into several partitions), and the rest of the space is used for Linux because linux has no problem.

  I guess that it really nails the problem with my laptop to a BIOS NON-lba-48-bit!

  Then close this thread as answered or matter who has more to say about this?

  LO

  P.S.: It was very nice meeting you fellows and appreciate all the help and tech expertise.

• The cutting tool not working anymore... :-(__It was my favorite thing...

  For some reason my Snipping Tool no longer works. I clicked and 10 or 20 seconds, and I get the error: the cutting tool does not work on your computer right now. Restart your computer, and then try again. If the problem persists, contact your system administrator.

  I did a scan of the disc, and the Tablet PC optional components meet. (Enabled).

  This is a dell computer that came preloaded, so I don't think that I can recreate the cutting tool of a disc. ALSO... mysteriously, my tool of Windows Live Mail has decided to not SEND email at the same time.

  I have chased google and hope you can help. It's me MISSING.

  Roxie 1117

  Suggestions:

  1. If it is possible: to do a system restore. Choose the date free snipping worked as your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  2. start > Search box, type system32 (that's a Word) > Enter > system32-box right, superior search window type SnippingTool.exe (that's a word too).
  Don't you see that SnippingTool.exe appears?
  If so, click it or PIN to the Start Menu or the desktop (create shortcut).

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• DV5220us will not identify Seagate 500 GB Sata 7200 RPM hard drive XP

  Hello

  Upgrade the internal HD on my DV5220us of the standard 120 GB drive at 5400 RPM to a 500 GB drive at 7200 RPM and I have problems with the laptop recognize the drive. I did a ghost of the 120 GB image and then put the image on the 500 GB. When I install the 500 GB drive in the laptop, it does not recognize it. booting with the XP cd does not recognize the drive either. I've updated to the latest version of the bios, 24 I think, stll nothing. If I use cables and connect the 500 GB as a slave drive, he sees very well and it works. If I take the 500 GB and install in my Lenovo T61, it starts fine. No idea why the DV5220us does not recognize the HD Seagate 500 GB Sata 7200 RPM? Thank you!

  T

  No one gave me an explanation to the problem. I'm actually advise to stick with a 320 GB 5400 RPM drive 500 GB 5400 RPM drives because have also been reported to cause problems. I'm sorry.

• News for cutting does not

  I use Illustrator CS2, and last year, I created a master of serigraphy for a DVD label that included one large form with other forms (texts and logos) cut out of it.  It was apparently made using the method of compound path (I am aware that there are several ways to do it, but I found a compound in the file path, so that must have been the method I used).  Now, I need to change the product number and others.  So the first thing I did was to undo the compound path (sorry, I don't know the exact word in English, I use the Japanese version of the Illustrator, but something like 'Transparent route release' from the context menu).  I found myself with the main road and a lot of small paths of different things that have been cut - some were in groups and others are not, but I could not see any noticeable pattern regarding why the groups were the way they were (and I have since then removed all groups) (, but symptoms do not change).  In the palette of the layers it seems that all paths, including inside and outside paths of letters like O and D are all fair paths, all the same color as the shape of the background.   But this market - I can redo the compound path and he looks right, with, for example, a zero inside opaque while the outside is transparent.  Somehow, he knows what forms need to be and who should be out.  I assumed he knew simply by location - for example the concentric circles rotate between transparent and opaque.

  But... it doesn't work on something new is added.  To make my changes, I deleted the vectorization of old text, make the new text and turned into outlines.  Then I selected as well as the rest of the stuff and selected "create a composite path.  But for some reason it isn't 'cut' something new.  The new paths get incorporated into the path in the layers palette and their color becomes identical to great shape, but transparent areas appear only where existing paths are not new.  Is there special on the old vs the new paths?  Probably miss me just one simple step in the process, but I have looked through various tutorials on this, and I can say that I'm doing it correctly.

  I can send the file if anyone wants to watch.

  OsakaWebbie,

  What happens if you create new outlines, select them and the underlying objects and Pathfinder > less before (I think it's less front; 10, it is subtracted from the area of the shape, and you must press Alt/Option to expand and get an interested way rather than a compound shape (not do you want to know the differenc, unless you already do))?

• My 10.2 final cut does not recognize my Lexar 512 ssd drive which is formatted for Mac Os journaled and completely empty

  My FCPX 10.2 does not recognize my Lexar 512 ssd drive,
  who is formatted for Mac Os journaled and completely empty (already formatted),
  He comes to see my ssd as an SD card once I click an import media.

  I had once FCPX 10.0.8 and with which I was able to edit with my external Lexar 512 GB SSD drive,
  that was seen as a normal external hard drive with all my projects and events.

  I'm not using Time Machine, never used.

  Any thoughts, why can't you do more?

  Here is a screen from my drive information: http://i.imgur.com/3TrITKf.png.
  and here is a screen in FCPX where he sees my ssd as external device: http://i.imgur.com/PB4dgkB.png

  Thank you
  Federico

  SO it is not working properly. The drive is empty. Make a new library and save it on the SSD drive.

• Windows 7 cutting does not

  Well i ' am running windows 7 and the small clipping tool (do not know what his name) where you can pin windows as from left to right. Well, if I whant to clip a window to the right I goes out of the screen. Help, please!

  Hold down the Windows logo key, and then press the P key.

  Is selected only on computer / highlighted?

  If so, click on the Start button and click on Control Panel,

  Click ease of access Center,

  Scroll down and click on Make it easier to focus on tasks

  On the merits, see if it is checked,.

  Prevent windows from being automatically arranged when moved to the edge of the screen / uncheck / apply and OK.

  If the option is already disabled your resolution of your monitor is Way Off.

• How to manage text cut with notes?

  As something very is produced, as the notes inserted in the body of the text?

  

  I think Camilo uses Split columns of text within paragraphs. It does not play nice with notes.

• VOB file is a short audio cut does not match

  I import the files to a DVD.  There are two problems I have.  The first is that the last file on the DVD is listed as 02:45 long.

  When I pull him in first and export it in the SOUL, the length is short by about 15 to 20 seconds.

  The second problem is that, as the files I built coins, the audo is off by about qa minute or two before the end of the file.  I played the files on the DVD, and audio is in harmony.

  I made these stars such as H.264.  I thought that I could make them as an uncompressed avi file.  Which seems to work, but them I get a file that is 234 concerts.  That takes all my space on one of my hard drives.  Too big.  Is the problem with the sound maybe because it's a separate audio file?

  -Thank you

  PC 12gigs RAM

  
  -C

  Should not be necessary to convert, but you may need video massage and audio broadcasts a bit to make them work. The following does not work with all MPEG2 broken files, but I had a pretty high success rate with the following process (I'll assume you're using Windows):

  1. Download the revamp and Restream (both are free and requires no installation).
  2. Open revise and click the file Mode. Click the Add button, click the button Add following; Find and select your VOB file. Click done.
  3. In the 'Stream list and demultiplexing' pane, you will see a MPEG video stream and (probably) a stream Audio AC3; If the audio stream has a tag "AudioDelay", check the box "Difficulty & Correct AC3 Delay".
  4. Select the MPEG video stream and click on Demux button; Choose a backup location and name, and then click Save. When the video is décimalisé, do the same for the audio stream. Once completed, you can close overhauled.
  5. Sometimes at this point, you can import the M2V file (i.e. the décimalisé MPEG Video Stream) in the creation and the file will be correct; If so, simply import the AC3 file, synchronization and bind and change now.
  6. If the file still shows the wrong length, open the program and load the file décimalisé inside M2V.
  7. In the section "Group of Pictures", check the option 'reset horodateurs ';  This will usually fix broken life. Choose a backup location and name (by default, the program adds ".") 0' name of the file), and then save the file. Try to import this file into first and check its length and playback.

  You can multiplex the files together if you want, but I usually just re-import them separately and bind them together in Premiere Pro. If you want to mux them, let me know and I'll add these details.