LP 9 with 10.8.5?

Similar Questions

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.

• I have an ipod touch 128 GB... but I'm almost to reach its maximum.  I want to do is buy a new ipod touch 128 GB and add new music without synchronizing the entire library to it... I have 2 ipods in conjunction with other copies

  I have an ipod touch 128 GB... but I'm almost to reach its maximum.

  I want to do is buy a new ipod touch 128 GB and add new music without synchronizing the entire library to it... I have 2 ipods in conjunction with the other copies of the other.

  is this possible?

  What should I do?

  Matt

  When you get the new iPod, you can use iTunes on your computer to select and synchronize the music you want on it, in the same way that you synchronize your current iPod - your iTunes will recognize them as different devices and will remember your choice of synchronization for each, it will not (unless, for example, you restore the backup of your current on her iPod) put the same content on both.

  (I asked for your post be moved to the iPod Touch forum, where you have posted is the iPad forum use.)

• I have an IMAC of 2008 with 2 GB of memory plus 300 GB of storage. If I buy 2GB of memory I'll be able to download Sierra?

  I have an IMAC of 2008 with 2 GB of memory plus 300 GB of storage. If I buy 2GB of memory I'll be able to download Sierra?

  Mike,

  No, macOS Sierra is not compatible with your hardware.

  Here is an analytical compatibility.

  

• I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  You can use it with your TV.

• Voice-over when booting with Sierra

  At the start of my MacBook Pro with Sierra 10.12 it opens with VoiceOver mode. I can spend VoiceOver by clicking on the ' < ' icon but it happen again the next time I reboot.  I checked the system preferences for accessibility, elements of connection and VoiceOver Utility and do not see any setting that he would invoke.

  Voiceover is displayed in the login window?

  System Preferences > users and groups

  To authenticate, click the lock icon. Give the name and the administrator password.

  Select "Connection Options".

  Uncheck the box "use VoiceOver in the login window.

• with IOS 10.0.2 - 5s iphone Bluetooth problems

  Since upgrading ISO 10.0.2 my M50 from PLT Plantronics (helmet unique headset) do not reliably connects with my iPhone 5 more. I have to go to the settings, activate bluetooth turned off/turned on, touch the device on the bluetooth page, etc. Once it connects successfully, it will reconnect (if I turn off the headset and turn it back on) for a short period. The next day he does not connect itself but I play with bluetooth on the iPhone again.

  It has always worked perfectly before the 10th of IOS.

  And, as I noticed others mentioning, the volume is much lower with IOS 10. The maximum volume is much lower. I can barely hear it now, more normal background noise, while driving.

  I did:

  Forget this device for the PLT M50 and paired again (several times)

  I did a Reset Network Settings

  I don't know what else to do - but it's a 10.0.2 IOS issue.

  Hello AppleUser2k,

  Please ask questions about your problems of connection between your iPhone and your Plantronics headset since you upgraded to iOS 10. I understand how important it is to have your Bluetooth devices connect with your iPhone with reliability. Here's what I recommend.

  The first thing we want to make sure is that all your data is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, try the troubleshooting steps in this article to help: get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device should also check with the manufacturer that the device has all the drivers and firmware to work with the new version of iOS.

  If you have checked everything and that you have installed the latest firmware or driver and always are problems, please be aware of your surroundings when you encounter these problems. If you can isolate the time or location, you see the problems, you can isolate the cause. You can even see this help article to ensure that you are not affected by outside interference: the potential sources of Wi-Fi and Bluetooth.

  Thanks again and have a great rest of your day.

• No free space after deleting files - trouble with optimized storage?

  Hi, I have macos Sierra and I deleted many files to my main drive and also to my external hard drive (both to the Mac OS Extended format) in preparation for the boot camp. I also emptied the Recycle Bin, although there is much less space on the two disks that it should be and the majority of the space is obviously indicated under "purgeable". I thought it would not be a problem, because I assumed that the space would be released, if I move all of the files there and if I need for the new Windows partition. However, this assumption was false. I can't simply use storage that I released. I can't move there all the files and I can't create the partition from free space. What can I do with it? It's pretty frustrating... Thanks for the help!

  You must use the Bootcamp Assistant to create the Bootcamp partition.

  Please provide details on the total space and free space on your internal drive. Post screenshots of what you see in system-> storage information. In addition, select the drive in Finder-I press control and post a screenshot of the window read the information.

• Calendar Apple App Bug frozen works only with iOS 10 update grrr

  Since I updated to iOS 10 (more more later than 10.2, etc.), everything was not too bad except THE APPLE CALENDAR app, its deiving me crazy when I click on the app it's like it freezes and past shift x 50 mode still something to do with the calendar app will cause either a frozen or a black screen or white and then crashed ack to main menu. Sometimes it will allow me to create but will be trolling with typing and finally crashed or not even save it... Please HELP I am sure what else to do, I tried to download google calendar and which seemed to have something of bug he loves too then something happens. And I tried to delete it and download it again, / force delivery, nothing has changed

  Hi there calsparks!

  Thank you for bringing your question on the calendar of freezing and trolling since the update to iOS 10 on your iPhone for Apple Support communities.  I rely on the calendar to keep my life organized, so I'm happy to help you resolve this issue today.

  Looks like you did a few good troubleshooting by force to leave the app, force to restart the iPhone and deleting and reinstalling the application calendar.  At this stage my next recommendation would be to backup your iPhone, then erase and restore your iPhone as a new device, then test calendar to see if it behaves correctly, and then restore your backup.
  

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  Have a great day!

• Battery, specifically in the night with ios10

  It happens to me all the time, when the night comes and I don my body with this sweet sleep, it's rough on my iPhone.  Really difficult.  I'll just go on my what happened to my phone last night...

  I went to bed around 01:30, my phone was 93%.  Here is a list of things that together did us before going to bed.

  -Set airplane mode because I get horrible service where I live, and I learned that that saves my battery

  -Closed all my apps

  -Night market

  These are normal things I do every night.  Do not forget that I have the app off background refresh and I have like 3 or 4 things in my widgets.  When I woke up just 6 hours and a half later, my phone had fallen to 59 percent.  Normally when I wake up and work all day and use the phone more (not much, I'm not a heavy user), I have no problem.  It's nighttime in general just when I have these problems.

  I had an iPhone before iOS 10 and 6, I had no problem with my other phone that my * service area, but I use call in wifi and FaceTime to correct this, if my phone is usually at home airplane mode.  Got a new iPhone 7 and who seemed to have no problems for 2 days, but now I'm back for the battery drain of night time making my iPhone 6.

  I doubt that is it because I don't see the problem often, but I think that my router is wrong and sometimes I lose the connection, but when the phone is in standby mode and I don't use it I doubt it would be the problem.  When I go to my use of the battery and check what is using what it says Facebook is 23%, and home and lock screen is only at 2% when it is clearly more 30% has been used yesterday evening.

  Any help would be appreciated, I'm fretting here!

  Facebook app is to drain the battery much. I would rather uninstall. But if you need it, there are a few tips to make energy not so consume: http://www.cultofmac.com/420508/stop-facebook-iphone-battery-drain/

  and also check out this article with advice general http://www.apple.com/batteries/maximizing-performance/

• Why are the 'minor' photos in the new iMac with K5 of the retina (using photoshop)?

  In English

  Hello.

  I met a 'problem' with the new iMac (retina 5K, 27 ", at the end of 2015).

  When I edit pictures in Photoshop, I can't get the images blown up big enough and the fillings of slide show they do not rule out even at a size of 72 dpi and with dimensions of 3000 x 2000.

  What don't I understand?

  Help would be so nice, thank you in advance.

  By Bjarne.

  PA Dansk

  Hej.

  JEG er pa stodt and 'problem' med den nyeste iMac (retina 5K, 27 ', ultimo 2015).

  NAR jeg redigerer billeder I Photoshop kan jeg ikke fa billederne blaest stort nok op og ved diasshow fylder ikke skaermen ud ved en str pa 72 dpi library pa med og selv 3000 x 2000.

  Hvad er det jeg ikke forstar?

  Tants city limit his BRA, pa forhand tak.

  By Bjarne.

  What version of the operating system and Photos do you use? Exactly how do you get pictures of Photos in Photoshop?

  LN

• Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I've tried everything

  Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I tried everything, every single idea. Without success! Any other idea?

  For example, you specify that the device does not display the lock screen, correct? Do you use Touch IDS? If so, try to put your finger on the device to see if it's what he wants.

  See you soon,.

  GB

• Not able to scan with the preview after upgrade from Mac OS Sierra...

  After upgrading to Mac OS Sierra. I'm unable to use the preview to scan.  Before this upgrade, it worked fine.  The HP scanner software does NOT work something like OS 10.8 or 10.9.  Preview worked perfectly so far.  If anyone knows how to solve this problem, your contribution will be greatly appreciated.  Thanks in advance.

  Have you tried scanning with Capture of Image instead? It worked for me.

• images don't "move with the text" correctly when I have several columns

  I use 2 columns, have been inserting images in my text and chose 'move with the text' but when I have to go back and fix something, or add text over the images all move and do not stay with the text.  They start on their knees and move to the other columns and will not stay with the text.  In my view, this has to do with the use of columns, does anyone have any suggestions?

  What version explicit pages (Pages: pages) and the Apple logo: about this Mac) operating system version are you using? There are different, a functional version of the Pages that are running on the current releases of OS X and guessing will not help you.

• Problems with 10.0.2 update

  Hello

  I've updated my iphone 6 night on Sunday, October 02, with the 10.0.2 update of apple's software. At updating my iphone, it initially only allowed me to enter a number of characters in texts/emails and started to crash / black. I rebooted my iphone (turn turn off/lit) and it has stopped working all together do not allow me to enter a digital/access code footprint. The phone had left the charge and did not work for two days.

  Yesterday (Wednesday, October 05) I backed up my phone to the icloud and resinstalled scratch. After many hours of pursuit, my iphone allows me today, but again once hangs on applications and allows once again only a certain number of characters to type in any application.

  I am 37 weeks pregnant (considered term) and I need to access emergency calls in case my baby arrives more early. My husband works away and I have no family nearby.

  No idea how I get my iPhone to work entirely without crashing or return to the previous iPhone platform without having to now continue with local ACR? I need my laptop to work, mainly because of the situation, I'm in and need this sorting as soon as possible.

  Advice welcome.

  Thank you

  Sue - A

  Hi Sue - A Q,

  I understand that your device hangs after upgrade to iOS 10.2, and limit the amount of text, you can enter on the keyboard. Since the normal restart has not solved the problem, please try to backup the device and using iTunes to restore it to factory settings without restoring all the data. Instead, configure the device as good as new. You can use your iCloud Apple id to synchronize between your contacts and calendars, etc. Test question to verify that it has been solved. You can use the purchase history App store for re download your applications.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Download your latest purchases

  The links above should help you with the procedures, I suggested. Please use the Apple Support communities to post your question. Good day.

• iPhone 6s txt notifications does not when it is combined with watch

  I have a different ringtone for contacts important such as the pages of work or family and friends.  I get only the tapping of the watch on my wrist... the ringtone is not audible on my phone when it is associated with my Apple Watch.  is there a setting I'm missing here because I can't miss my work pages.  My Apple Watch setting is on my iphone for mirrored text messaging

  It is by design. When you watch unlocked (that is, you wear it) and the phone is in standby mode, all notifications will be directed to your watch instead of the phone survey. Custom notification sounds are not played on the watch.