LR 4 export questioned

Similar Questions

• Export question

  I installed Oracle Database 11 g and have a question about exporting and importing a database. I use Enterprise Manager and agreed to the following: data-> export to export files. The bottom of the screen, I need to provide credentials to the host. When you try to use the SYS username, I see the error message say disconnect and connect using a different role.
  Should what role I use? Should I create a specific role for this task, and if so, what privileges the role has?

  Manly men do not use the Manager of the company (GE) for export but expdp (Data Pump) on the command-line :-)

  Have a look here to see how it works:
  http://docs.Oracle.com/CD/E11882_01/server.112/e22490/part_dp.htm#i436481

  Seriously: You should consider using expdp / impdp - with just practice, you are much faster this way than with EM

  Kind regards
  Uwe Hesse

  "Don't believe it, try it!
  http://uhesse.com

• DNxHD export questions

  Hello

  I need to export an intermediary in PP CS6 and when you use the so-called best lossless DNxHD codec I get the following questions:

  1. the roll of box´s dialogue DNxHD in the drop cut the end of the line of information for each parameter. Is there a solution for this?

  2. my project is 23 976 1920 x 1080 p 16:9. What is the best setting for the DNxHD lossless?

  3. rendered images has a smaler framework, which means that I get black bars all around him. How to solve this problem?

  4 whereas these is too many difficult questions and there may be not a total solution for them, which would be the best next intermediary without loss for Windows 7?

  Thank you very much!

  See you soon

  DNxHD is actually not lossless.

  UT is a free codec which is lossless.  It appears as an option AVI for PC and QuickTime for Mac option.  And it plays well with the Adobe software.

  http://Umezawa.dyndns.info/archive/utvideo/

• Animated GIF export question

  Strange new question again today - surface animation image fine times when played from the timeline, but all the layers are exported piled on each other during the duration of the entire animation.

  I am able to see that because layers have a transparency.

  Subject of animation - 8 images with infinite loop, imported in a timeline via the "Frameworks make layers" command in a menu drop-down in the Timeliine window.

  Interpolations of animation are disabled, s 01.Intro delay for all frames

  I was able to export the animated GIF image before, I was just wondering if this issue is related to the last update.

  Everyone knows this weird problem?

  -Thank you

  Photoshop CS6 Extended

  Windows 7 x 64 SP1

  Well, you have disabled the dithering of transparency, haven't you? GIF can have only one level of transparency. Everything must be simulated using colors or dithering.

  Mylenium

• EXP-00091 exporting questionable statistics error in utility Exp

  Hello everyone,
  
  I use oracle 10g, I have a UTILISATEURTEMP user, when I try to Exp utility user at the command prompt, I get the following Notification;
  EXP-00091 exporting more than questionable statistics
  successfully completed, export activity but I am worried about the Notification.
  any suggession.
  Thank you and best regards.

  Hello

  no need to worry... alll you mentioned is exported.

  Kind regards
  Deepak

• Lightroom sudden export questions

  I've been working a lot of photos and export photos in batches of about 300-400 at a time on my external hard drive when I am done with them.  This morning all of a sudden, I tried to export 2 photos and for an unknown reason my computer locked up.  I have rebooted, tried the same two pictures again, then restart I tried alone, still frozen.  After another reboot, I tried a different photo from a different lot, and attempted to export to the hard drive of my laptop... same results my laptop froze.  What could be causing this type of problem, or where can I seek to solve the problems?  I'm on a PC Windows 10.  This is the first time that I met such a problem with Lightroom.  Thanks in advance for any advice or suggestions.

  Check the event viewer to see what caused your computer to lock up. Event type in the search box, click Event Viewer, and then expand Windows logs and watch the time that your computer you locked in Applications should find an entry with a red round icon with one! in the middle and error written next to it.

• Export questions

  Yet another crazy problem with PP. Every so often, when you export a movie, I get the dreaded ' error unknown Compliling Movie, ' error. Not a lot of useful information on it when searching online.

  Sometimes I can leave everything and restart PP and exports correctly. Other times I have to restart my machine. Deal with the problem at the moment and have not found a way around it this time.

  I use the latest version of PP (I'm on CC) and the latest version of Mac OS on an iMac. These problems are VERY frustrating.

  Anyone see this one, or get an idea of what it can be? It doesn't seem to be a corrupted clip or something crazy like that, because he never seems to have been in the past.

  I tried and still the problem - had this problem the last time a day or two ago. After leaving the machine (turn off at night) and come in the morning, it worked. I have really no idea what triggers these errors nor correct them. Seems to be completely random. It happens every few projects.

• Complete EXPDP export questions

  I need to migrate an Oracle 11 g 2 server to new hardware.

  The two databases must coexist for a while.

  Impossible to use RMAN, we use the noarchive mode.

  We use a NAS to store the data files (System and application) and the control file.

  I created the new database without any data application. Here is the configuration:

  Current DB...

  The database name: ARC1

  Oracle home: /app/oracle/product/11.2.0/db_1

  Location of the data files: / du01/oracle/oradata/survey1

  System01. DBF, sysaux01.dbf, undotbs01.dbf, users.dbf, temp01.dbf, temp02.dbf, temp03.dbf, control01.ctl

  and all application *.dbf files.

  New DB... (it's on another server)

  The database name: ARC1

  Oracle Home: u01//app/oracle/product/11.2.0/db_1

  Location of the data files: / du01/oracle/oradata/survey1/survey1

  System01. DBF, SYSAUX. DBF, undotbs01. DBF, temp01.dbf and control10.ctl

  If I do a full export/import it will work? The control file will be get updated with application *.dbf files?

  How enforcement *.dbf files copied to the new/du01/oracle/oradata/survey1/cra1 location?

  I know that I need to add the new mount point to the fstab, can I do this after you import?

  I need to copy the file init.ora and orapwd as well.

  Something else I'm missing?

  expdp user/pass directory=dumpdir \  
        dumpfile=arc1.dmp \  
        logfile=expdp_arc1.log \  
        full=y  
          
  impdp user/pass directory=dumpdir \  
        dumpfile=arc1.dmp \  
        logfile=impdp_arc1.log \  
        full=y  
  

  (1) install the same version of oracle on the new server software (I think you have already done this)

  Not only do you have the same version, you will also need to apply patches on the targets that have been applied to the source. An easier option would be to clone the ORACLE_HOME from source to the target (assuming this is possible) - cloning an Oracle Home

• Audio and video file export question.

  When I export my video, I'm MPEG2 1080 p Blu - Ray, but after that he implemented that it exported video file and one audio file, how do I get to stay together, while keeping the 1080 p? Thank you

  For Bluray it is set by default on two files in the burning software as yet he prefers a single file.

  If you want a single value TS Multiplexer in the export settings.

  If you have a bluray, bluray H.264 will give you sharper images.

• HEEELP! Export questions Simple clip

  Hi all

  I did a quick 10-deuxieme video it consists simply of a cache of color and RGB 5 goals - two of which I applied keyframes to in order to make the small spin dente (cheesy, I know, but just wanted some movements). This will just be used as an opener and one between the space reserved for a large video presentation.

  

  Now, here is where my problem is - the person I am that yield said a .mov H264 ol ' regular is too compressed to their needs, so he needs to exported as a lossless animation codec...

  When I change the settings of export to such a, the .mov that results is just empty - always lasts 10 seconds and comes out as a 7 MB file, but there is no picture.

  My guess is I have something wrong in the settings... but I'm not quite experienced with the PP and I go absolutely crazy trying to understand this... and of course I need done as soon as POSSIBLE. Any suggestions? Anyone? Any where? Please help save my sanity.

  

  
  

  Try progressive instead of Upper and disable audio. See if it will work.

• Discoverer Viewer Export question

  We use MS Standard 14.0.6123.5001 and OracleBI Discoverer Version 10.1.2.55.26 2010

  When I consider the report in the viewer of his fine, but when I export it shows where he '0' its supposed to be null.

  Example of

  Amount of the Invoice Date, invoice line

  1234 1 JANUARY 2013 500.00

  750.00

  0                   0                                       Total   1250.00

  I checked the query as Governor and its null.

  Please advice.

  You can change this way of torque, you can either do this for each workbook or globally for all workbooks.

  1 discoverer liked, open goto report properties, CHANGE worksheet, > TABLE FORMAT (TAB) > left null for SHOW the ACE VALUE NULL

  2 discoverer liked, once you connect goto TOOLS > OPTIONS > SHEET (TAB) > left null for SHOW the ACE VALUE NULL

  3.pref.txt, you can modify the valu preferably in pref.txt to set the null alue for good, it's worth preference "NullValue" entitled NULL to this value and then apply the script preferably.

  Thank you

  SS

• Multitrack playback / export question - problem with envelope

  Hey all

  I have an unusual problem with playback and export of my multitrack session.

  I have a track with dialogue and occasionally actor lines must have a deep, 'voice of the demon' fade gradually. For this I have applied an effect to the track and then automated, the 'Mix' envelope for the plugin that I use to create the voice deep.

  However, when I play back audio, the deep voice effect continues even if I spent the envelope mixture at 0. If I drag the playhead to the rear slightly and press play, when the playback head is directly above the effect, he plays well. If the effect essentially ignores the Automation so I play through from the beginning, but if I jump, automation is recognized.

  I thought it could just be a fluke with the reading, so I tried making the track. However, pre rendered also completely ignores the automation of the envelope and the effect is at the same level throughout the duration of the session, even if I disappeared the mixture up and down several times. The same phenomenon occurs when I export the multitrack session, it does not take into account automation.

  Is there a solution to this?

  I'm editing on a 15 "Macbook Pro (8 GB of RAM) in hearing CS6 retina

  Thanks for the help, hope this makes sense.

  So, I realized a work around.

  Instead of automate each effect on the same audio track, I created several buses, each bus with a plugin. I can automate the envelope for the composition of the bus and send each bus to the later bus and therefore have a channel for each effect. Tedious, but it works.

  Just a few defective plugins I guess, probably not the fault of the hearing.

• Keyword export question

  I have four levels of keywords and wanted to export / print the text.  Export seems to descend three levels?  Can someone try and tell me I'm bad / mad / wrong.

  They are similar to the

  1. the people

  1.1 family

  1.1.1 family Johns

  1.1.1.1 Mary

  1.1.1.2 Fred

  1.1.1.3 Andrew

  1.1.2 family of Sues

  1.1.2.1 xxx

  1.2 friends

  ....

  You get the idea (BTW the numbers aren't in my keywords, text only)

  Thank you Gary

  4.3 LR with windows 7 64 bit... will try again this evening when I'm home

• Online PDF export question - hyperlinks and transparencies

  We started to put our magazine on paper (approx. 65 pages) online in digital format with hyperlinks. The problem we are having is with the transparencies and the effects of all the graphic elements. With so many problems, our digital mag salesman said to export a PDF X - 1a, but in doing so, we lose all the hyperlinks that are created in InDesign. Manually add all the links in Acrobat would be much too tedious. Does anyone know an easy fix for this? As in Illustrator, you can easily use the rasterize command to flatten the effects.

  Have you tried to open the interactive pdf in Acrobat and 'replace the pages' with the file pdf non - AI?

• Premiere Pro cs5 and Canon 60 d export questions

  Hi there guys...

  I recently bought a canon 60 d and imported my first films in first pro for editing. When I tried to export my finished films I noticed that no matter how many different codecs, I changed my film high definition would export in a frame size of 720 x 576 and not 1080 in 1920. Even when I ticked the 'Correspondence settings' option it would remain the same... ! Until now I was shooting with a sony camera, and when I imported the MTS files and exported, there is no problems with sizes of chassis and quality high definition I should get (as in the original movies, I imported).

  I've read here in a similar position, (on a NIKON model), that before you import movies, you must change the extension of the .mov (which comes with the canons and Nikon), to .mpg... Well I did it and it worked... I got the frame sizes, I wanted in the export, (1920 x 1080) dialog box. Is the right way to do things right... should I really have to change the extensions as described above...?

  To test another theory out, I started a new project, change the import settings this time to this:

  * Sequence Presets: found the Canon XF Mpeg2 1080i25 50i

  .. .and imported my movie once more. When I reached the export dialog boxes, I had the frame for PAL format size.

  So... is this correct? Should I configure these parameters in new sequences to the future, even if I don't know what the "Canon XF" means to and if I lose the original video quality... ??? I always shoot in full HD at 25 frames per second in PAL... What are the right settings for this...?

  Any help or advice in the above would be appreciated..!

  If you use CS5.5 and you right-click on an item in the project Panel, you can directly choose:

  

  or use the file/new/sequence of the Clip command if you have a clip selected,

  

  If you're using CS5, you must move the clip to the new item at the bottom of the project Panel icon.