LR locked up 3 times in the GRID visualization

Similar Questions

• A few Images in gray in the grid visualization

  It is the first time I've seen this problem.

  Today, I was looking at my library of images and I noticed that some of the images are grayed out.  Dimmed, I mean they appear desaturated... as if LR4 is trying to tell me something about the picture... but I don't know what.

  If I click on the image I can modify it.  He appears normal when the 'image' (once again the bright colors).  But as soon as I make another image of the 'image' the other image goes back to the gray appearance.

  This is only true for certain images.

  What is going on?

  Steve

  Is it possible that you have rejected these images, they are now marked to be deleted?

• Work with the grid - CP v5.5

  Captivate v5.5

  No matter what the grid settings I use, I can never get the grid to appear properly aligned in the slide.

  The example below is the grid on 50 and I hope that you can see on the left and top grille 'points' are running along the top and left of the slide but the grid on the right and at the bottom are not in the same position.

  

  What I try to do is something along the lines that you have with MS Powerpoint (see below)... and what would be great in Captivate (MS Powerpoint), if horizontal and vertical grid lines average were "BOLD" - that would work with the grid so much easier.

  

  Noel

  Noel,.

  I gave up for a long time using the grid, it is not a very functional tool. Have been pleading for rules and guidelines, but not enough support for these applications I guess. Another problem is the fact that the registration point of the object that serves as a reference for alignment, displacement, alignment and resizing is always at the top left of the frame. Tweaking only option for grid is to set the size of the grid, which will then change at the same time increments for resizing and moving if you use CTRL-arrow combinations.

  If you explain why you want to use the grid, maybe I could explain my way to align using the transformation many shortcut keys and accordion.

  Lilybiri

• My ipad locking for some time now and don't can't unlock it, how do I unlock the lock of the activation?

  How can I unlock my ipad for the actviation lock?

  Bettylouisetrapp wrote:

  How can I unlock my ipad for the actviation lock?

  Enter the correct credentials that was used the first time, that the ipad has been implemented.

  If you bought it second hand contact the original owner.

  There is no way to bypass the blocking of activation.

• Can I set the time on the lock screen is?

  When I turn on my iPhone (6 s), the first thing I see is my lock screen.  It only stays on for a few seconds, then disappears.  If I'm not enough fast slide my finger to the right to get to my home screen, I have re - activate my phone.  Is there a way I can set or change the time that the lock screen stays on?

  I don't know how to set the auto-lock function which turned the iPhone off after a certain period of inactivity.  It's different.  The automatic locking of setting has no effect on the amount of time that the lock screen remains lit.

  How do I set the time to stay on the lock screen?

  Have you considered simply use Touch ID?  In this way, it wouldn't even matter if you could see your lock screen.  Just push the "home" button and then tap your finger on the home button and your iPhone will unlock.

  Use the ID Touch on iPhone and iPad - Apple Support

• I do a layout of paper every two weeks; This time, when I opened my model, set up for the next issue when I typed 'W' to display the grid I have something totally different than previously, a background grid which is more annoying.  Why in the world

  new to InDesign 6 months I do a newspaper page layout every two weeks.  This time, when I opened my model, set up for the next issue, when I typed "W" to display the grid, I have something I never saw elsewhere. ".  The background was filled with a new grid of tiles rather than the void behind the newspaper that I'm used to seeing.  I don't know what happened, but it seems that Adobe has tinkered once more with the program.  The last time this happened, I lost the icon "cover the columns" at the top; now, it's a case of two steps to put the head-lines across more than one column.  NOT useful.

  There is probably a command or a term, I don't know that this right but my main question is why, when I did this dozens of times before, doing something different will come this time.  (I know, without replica.)

  I'd also appreciate comments that someone out there could offer re why now when I tap on InDesign, is there a slight pause before that something happens to the screen.  What is my new Mac, or something to do with the program that I can fix it?

  Thanks, Sacie

  It looks like the grid of the document, which can be disabled in the view menu.

• Why the words with enlarged grid friends how can I reduce it so I can see all the grid at the same time

  Why has Word with friends expanded grid I see not all the grid without scrolling to the top a low how do I minimize it again miminisi

  NG reduced just the entire page

  Hello
   
  1. you play this Online? If Yes, do you use the Internet Explorer browser to play the game?
  2 have you made any changes to the computer before the show?
  3. are you able to play games without any problem?
   
   
  Answer for you help the better.
   
  Follow the article mentioned below, if you use the Internet Explorer browser to play this game online:
   
  The problems of games online using Internet Explorer:
  http://support.Microsoft.com/kb/2528246
   
  You can also check:
  Suggestions for a question on the help forums
  http://support.Microsoft.com/kb/555375

• I use LR 5.7 on my MacBookPro w retina and cannot display the images in the display of the grid - only at the same time. This will make export painful and long.

  5.7 LR on a MacBookPro w retina using can't display the grid to open the imported photos I revised and improved. Can you tell me how to open it in the grid view?  I tried it in the drop-down list so that clicking on the icon in the grid view, does not.   Have been using LR for two years and this has never happened before.

  The grid view is not available or is the size of the thumbnails view set grid too large so only fits on the screen?

• Assigning images to the grid according to their value random number cells?

  Hi all!

  I need a good point (or push) in a good way.

  Background

  (With previous assistance from this forum), I created a random number of 12 x 9 grid that scrolls the numbers 1 to 9, a total of twelve times each. Then I created a button that mixes the current grid cells whenever it locks. I now want to use 9 images that I imported as individual symbols in the library (I gave them each their own class called "skin1," 'skin 2',...) "skin9") as the cell labels or equivalent. I also created images as individual video clips (using the.) The class Sprite as extended but base class keeping the real image of class names in line with the name of the object, i.e. the "skin1" image is the class "skin1.as").

  Question

  How can I assign these images for the cells in the grid according to their respective values (from 1 to 9) and ask them to fill the grid, whenever I click on the button 'shuffle'? Thus, for example, in my grid numbers 1 to 9 randomly appear 12 times each. Whenever the number 4 appears in a cell, I want it to be assigned to the picture "4 GB" (which is just a chart that looks like a button and has a fancy number '4' printed top). Here's a piece of code that I use to draw the grid cells with:

  // Creates a grid cell when called by generateGrid().
  private funciton drawCell(_numeral:int):Sprite
  {
       /*
            This is the code I am currently implementing to populate the grids with (although I
            don't want to use text labels as I want to fill each grid with an image according 
            to its numerical value (1 to 9).
       */
       var _label:TextField = new TextField();
       _label.multiline = _label.wordWrap = false;
       _label.autoSize = "center";
       _label.text = String(_numeral);
       // Add numerical label to cell array.
       cellLabels.push(_label);
       var _s:Sprite = new Sprite();
       _s.graphics.lineStyle(2, 0x019000);
       _s.graphics.drawRect(30, 0, cellW, CellH);
       _s.addChild(_label);
       return _s;
  }
  

  
  While what follows is not the labour code, it will show if all goes well I want to reach inside this function so I can't use the code snippet above to the text labels:

  This will create "if all goes well" a table of 9 images by calling their classes.      var _imageArray:Array = [skin1, skin2, skin3, 4 GB, skin5, skin6, skin7, skin8, skin9];      That's what I want to get for each cell using the matrix in the image above: for (i = 0; I < cells; i ++) {if (_numeral == 1) {/ / Insert image skin1 for each instance of #1 in the grid.}}           } If (_numeral == 2) {/ / Insert image skin 2 for each instance of #2 in the grid.}           }... If (_numeral == 9) {/ / Insert image skin9 for each instance of #9 in the grid.}           }      }

  Again, I want not to use text labels. I have a skin graph custom that I want to go over each number on the grid, based on its value (from 1 to 9). Help with this is greatly appreciated!

  :

  // Creates a grid cell when called by generateGrid().
  private funciton drawCell(_numeral:int):Sprite
  {
       /*
            This is the code I am currently implementing to populate the grids with (although I
            don't want to use text labels as I want to fill each grid with an image according
            to its numerical value (1 to 9).
       */
       var _label:TextField = new TextField();
       _label.multiline = _label.wordWrap = false;
       _label.autoSize = "center";
       _label.text = String(_numeral);
       // Add numerical label to cell array.
       cellLabels.push(_label);
       var _s:Sprite = new Sprite();
       _s.graphics.lineStyle(2, 0x019000);
       _s.graphics.drawRect(30, 0, cellW, CellH);
       _s.addChild(_label);
  
  var classRef:Class=Class(getDefinitionByName("skin"+numeral));var image:*=new classRef();_s.addChild(image);      return _s;
  }
  
  

• Locking in HFM entities via the workspace

  We lock features of base to a grid in the workspace. I believe the maximum number of lines available to see on a grid at a given time is 1025 and so we the 15 remaining must be selected manually to lock 1040 entities. This 15 will grow as we create new features each month. Do we not have any work around to avoid the manual effort.

  When you lock a parent, all descendants are locked as well. Rather than view 1040 lines, just show the top of each hierarchy.

• sleekbook envy 6: laptop won't start, caps lock flashing 3 times

  I want to 6 sleekbook and all of a sudden that it does not start and the caps lock flashes three times I already saw the code flashing and tried to rest the memory but it still doesn't work, I ran in problems with the laptop before the blue screen, but it was fixed its own I think

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that your laptop has a blank screen and a blinking/flashing CAPSLOCK all the time

  If the Capslock LED flashes 3 times this means "Non-functional memory error", in order to solve the problem, replace the card memory

  Note: If you are comfortable open Notepad, you can check how much you have memory module. If you have 2 sticks of memory, you can test one at a time on the two slots individually to check if the fault is with the module module slot or memory memory your laptop [repeat the same steps to test another memory module]

  If you find the above steps difficult and that it is a hardware problem and I recommend you contact HP Support by phone for further assistance immediately to get your diagnostic Notebook and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  Although I am an employee of HP, I speak for myself and not for HP

• Time after the event, without blocking the user

  Hi, I am creating a software to control a power supply. One feature that I have bad to add is a timer.

  I have a structure for the event that fires when the user clicks on the buttons, which most slowly increases the current for a period defined by the user. I want the timer to count so far defined by the user of time (in seconds) after the event fires. One thing, however, is that I need to be free to trigger another event (which stops the power supply in an emergency) so I can't have this synchronization process lock me up for snap buttons.

  I was experimenting with the millisecond timer, as well as with a loop that goes through with a defined time interval, but it is not quite give me the functionality I want. (I've been placing these loops of timing outside the structure of the event to other events run yet, but I want the timer to only is triggered after an event is triggered, is it still possible?)

  If you need more information, just ask, thanks!

  Thnigs to do to dramatically improve your code:

  You need not separate loop.  Put your code from timer inside the structure of the case of timeout event.  Set the time-out to 50 instead of 500 to match what is in your separate loop.  You can get rid of the becaue of queue, it is no longer necessary.  Create registry to offset on the main loop.  When the event occurs to start timer, pass the time for the shift on the right side register.  Wire the shift register on the left side in the event of timeout to use its value.  BTW, the shift in your separate loop register is used to nothing because you do not change the value on the wire.  Don't put all the loop in the case of timeout, get rid of the loop and just put the code of the loop, with the exception of the EndTime variable that can be removed and 50mS delay, which can be removed.

  Put the Boolean value of early Inc. inside the case to start Inc. value change event.  Same for all Boolean values.  Put them in their cases of particular event.

  Get rid of local variables now.  You'll race conditions if you do not, you doing wrong in that you don't need especially now.  Look at the current limit control.  Add a wire from the control of the current limit to where feeds the local variable of the current limit.  Delete the local section.

  Move all the controls from the inside of the structure of the event outside the structure of the event, but still within the main loop.  Wire controls where they are going.  Now you can eliminate all local variables of thos and just wire from control where they are needed.

  All outputs error.  One is enough.  Create an error in your front panel.  On the block-diagram wire the error in the first function of Sorrensen before the loop.  Where the error from the Sorrensen hit the loop function, change the terminal on a shift register (right click and select replace with shift register).  Move the error Out 2 to out of the loop on the right side.  Error 2 wire the register shift on the right side.  Everywhere, you need a mistake in, branch off the error in the thread because it is in the loop.  Wire all your outs of the error in the case of the event and the last Sorrensen function to a function of merge error.  Wire of this error on the shift register.  All your errors are combined in a single indicator.

  That should do for now.

• Several colors of background on a GOLD-table fill to draw graphical point * behind * the grid lines

  I have some a matter of aesthetics.

  I wrote a program that displays data for binary files. These binaries have blocks of data, an hour or two. Each piece is a playback window, and there are a handful of reading windows per day.

  The data view is in effect, what I'm working on now is a more intuitive way to choose what data should be displayed.

  My goal is to have a graph of waveform with the X axis represents a day full (0 - hr 24 hr) and is indicated on the chart what time windows are available for review, that is, data have been collected. The background of a "collected" window will be yellow (or another color), while times in the course of which no given is collected will be black. The user will then drag the sliders to select the window of what he or she wants to see the data.

  It was quite easy to achieve by drawing the curve a digital signal (1 for data collected during this period, 0 for no) and point-fill with yellow to zero. My only problem with this solution is that filling point appears on the lines of the grid, that does not look quite right.

  Y at - it an easy way to get the grid to appear at the top of the charts, or is there a way to programmatically set multiple background colors (it could do the same thing)?

  Use the property "draw pictures" and draw your own grid before image.

• I just bought a 6 d. is it possible to use the grid in other than the auto mode?

  I just buy a 6 d.  Is it possible to use the grid in other than the auto mode?  Also, is there a way to use the self-timer in other than the auto mode?

  Thank you very much. I look forward to your comments.

  I have to assume that your camera came with a manual you need to rely on. In my manual for my 7 d Mark 2 the index near the end of the manual lists the applicapable pages for whatever this is relating to the use or other people. Grid is under G, Self Timer is under S and called "self-timer."

  If you use a computer based pdf to see the info it will probably be several pages listed, but you can click on a page number to get to it rather than scroll to it.

• Pavilion dv7-6b22ed qj376EA: white screen on startup / lock flashes 3 times HP Pavilion dv7 of uppercase letters

  Hello

  Hope someone can help out me.

  First of all, we have received INTELLIGENT warnings but we were still able to start Windows in safe mode (took about 15 minutes and the laptop was getting hot). We took out the HARD drive and connected it via USB to another PC. Could not read the content and need to format the drive... has NOT done that. We have kept the 'Original' HARD drive

  We bought a Samsung EVO 850 250 GB SSD for laptop... as replacement for the corrupt and to modernize the system. The main battery has been removed, the adapter is not plugged in for a few days. Today we received the new SSD and installed IT... but... the laptop don't boot! The screen remains blank. The F12 is the orange light and the CAPS LOCK flashes 3 times.

  We read several articles on the forums and tried several suggestions:

  -Changed the BIOS battery;

  -Several "resets hard":

  . remove the adapter and the main battery and pressed the button for 15 seconds;

  . Windows key, B and starting power;

  . by pressing F8 during startup;

  -build the original HARD drive back;

  -Remove the memory and tried all the banks in the locations;

  -connected to an external monitor.

  -boot via bootable USB drive.

  -clean the cooler fans (with a jet of compressed air);

  -tried another AC adapter;

  -tried without main battery;

  -tried to start without memory, no battery of the BIOS and no HARD drive installed.

  No matter what we tried... after trying all the suggestions of the screen remains empty and the LOCKING of UPPER continues to blink 3 times repeatedly.

  Anyone any idea what ik can try again? In my perception the BIOS does not load?

  Look forward to reading your suggestions! Thanks in advance

  Best regards

  BerDie13

  Thanks Malygris1...

  ... but I found this list of that's why I placed the memory banks in all possible combinations. And banks have even tried in another laptop and it works great... All week I anything with the laptop since last Sunday... plugged the adapter and you press the power button... a cursor blinked my eyes... then the HP logo... several... error messages but I saw something back to the screen telling me it was "wrong".

  Build in the SSD... did some bios checks (memory and disk). Everything was OK! So I installed W7 and found all the drivers... updating the software of the BIOS... everything works stable right now.

  In my perception, because the power has been turned off for a few days, the BIOS was not loaded at startup (or POST). After a week with a new BIOS battery and the main battery... system had enough power in the 'circuits and components' at startup...

  One last thing... that I cost a lot of time: under the main battery... you will find the model number. During the download and installation of the drivers for this model number, I had a lot of mistakes... Then I used the HP support tool to determine what model number, I was working on and what drivers to download. Tool gave me another number and model for this model, all the drivers were good. I wonder why the wrong number was printed on the box?

  This message can be closed. Thanks again Malygris1 for the reply.