Qosmio F10 disconnected ethernet cable?

Similar Questions

• Disconnected Ethernet cable

  Hello

  My Imac has been connected with a cable ethernet directly on the road, but today I can't use this connection because she says that the network cable is unplugged, witch is NOT. So now I can access via wifi.

  I tried to connect the network cable to a different port and use another cable bu nothing...

  Can someone help me please?

  Thank you!

  Restart the computer and reset the PRAM while you're there. If it does not the test with another EtherNet cable.

  Instructions for iMac Intel SCM and reset the PRAM

• Disconnect Ethernet cable internet on Macbook

  Just installed a Netgear AC1200 Wireless Modem Router.

  We have a PC, a Surface and a Macbook Pro.

  WiFi works well on all of these devices.

  Wired is very good with the PC, but when connected to a Mac to another room (by ethernet USB adapter), the internet connection to the Mac becomes invalid after a short while (about 10 to 20 seconds).

  This cable has worked well with our old Belkin modem just Twitter.com.

  Have you tried cycling the modem, cycling Mac, disable WiFi on Mac, by pressing the wireless button on the modem.

  Is this a problem switching? It seems that as soon as the Mac sees the cable it disconnects from the network.

  Great to have WiFi working but we bought this new modem to be able to easily turn off the WiFi and just use the cable connections when we are in our office.

  I'm certainly not gifted technically, so hope there is something fairly simple to do. Would appreciate some advice on how to solve this problem.

  OSGC

  Thanks for your help Darren. Problem is now solved. Has been a fortuitous error in a single link cable.

  B

• Qosmio F10: Cannot set up the TV Tuner!

  I can't be able to receive any form of TV on my Qosmio F10 signal.

  I tried a manual and automatic TV signal setup in Windows Media Center, while only connected to various points of antenna and my satellite receiver, but the software manages never actually receive any form of signal.

  I checked each of the cables works properly by connecting it to a TV, and there is certainly a good signal.

  All I can think is there is a problem with my Toshiba TV Tuner hardware (I uninstalled and rebooted to reinstall drivers TV Tuner), or possibly the adapter cable little.

  Someone else had this problem?

  Any ideas?

  Ok... No one has any ideas, then!

  Here's an update... I took my Qosmio F10 at the shop where I bought and showed them the problem.

  They were very helpful and offered to test their display machine. He struggled, but finally picked up a garbled from an antenna signal.

  They agreed that my Qosmio was wrong and pulled another out of stock. We decided to check quickly to see that another did not pick up a signal either!

  As they had no more stock, I agreed to take the display model at home, because we knew that it worked.

  Since then, I only managed to get for my Sky Digital receiver by manually telling it what channel it is on (68) and have not been able to set up anything via a terrestrial antenna!

  I have connected the original problem with the technical support of Toshiba, who said that it should be referred to their team of level three, who work office hours only. I have been waiting for four days for a response and am not a happy chappy!

• Qosmio F10-128 with bad reception of TV in MCE

  Hello
  I have a Qosmio F10-128 on the loan and have a problem with a TV tuner in Windows Media Center.
  During the configuration of the computer, everything seems ok, but when I try to watch a channel of the image is very poor with many artifacts and no noise.

  The strange thing is that everything is working fine with the Qosmio player.
  I have tried every setting in MCE.
  All connections are fine and as far as I know all the settings are correct.

  I live in Belgium, then uses the PAL settings.
  Do you have any suggestions?

  Many thanks in advance,

  L.

  Hi LVG

  What type of antenna is connected to your Qosmio? Is it a cable TV?

• Qosmio F10-125 TV tuner

  I just took delivery of a F10. Excitedly, I plugged the Jack on the back of the PC to the regular Arial and searched the signal by the auto scan the media Wizard. No signal has been detected. I tried to use the analog RF signal of my Sky digi-box, which must be a good sign that can be achieved. Still nothing. In both cases, coaxial cables carrying a signal healthy as evidenced by TV happily play all channels on the cable from the two sources

  Someone knows what to do? or this wonder Qosmio F10 is a joke!

  Post edited by: Ronaldat

  Hi Ron

  As far as I know that you use Composite in the port if you want to watch TV using Qosmio player. In this case, you can change the channel on your cable box and watch it on your Qoamio. In this case, Qosmio player should find a single channel.

  Composite in the port is for video and audio signals. If you use S - VHS to it's just for video signal without the sound and I don't know if it will work properly with Qoamio player.
  Please try again with Composite in the port. I am very interesting if there is some success.

• Record from VCR on the Qosmio F10 - 101 - no video

  I read a lot of topics but I need some information additional regardin my problem

  I myself Qosmio F10-101

  I tried to record from my VCR on computer, I connect the VCR output to monitor using the came with a computer cable laptop but audio is here and no video... no yes no picture, I used windvd creater which came with the laptop, but no picture, I also tried the s-video input and no image appear also as the program windvd unable to give the icons of all the devices connected to the laptop

  What should I do?

  Hello

  I know, you can not save to your VCR using the monitor and S-video, you can use the port fireware "located right next to the PCMCIA port on the left side of the laptop" with windvd.

  Thank you

• Qosmio F10 reviews

  I am currently deciding whether to buy a Qosmio F10. There seems to be 3 versions available for me the 100 F10, F10 - 124 and the F10-125. The F10-125 seems to be the best?

  I am concerned about the TV reception - if I simply plug an antenna on the standard roof at the rear of the Qosmio will I get a pretty decent reception (as I do when I look at the TV)? Also I've obviously not will keep the tv aerial permanently connected, so whenever I want to watch tv, I'm going to have to retune the Qosmio?

  What should I do to watch freeview digital tv, that is if I buy a box of TNT can I just plug in the back of the Qosmio that appear all channels?

  There seems to be 2 ways to watch TV 1) the MCE Qosmio Player 2). From a previous post, it seems that the remote control only works with the Qosmio player?

  In general any opinion with the ease and convenience of watching TV on the Qosmio would be appreciated so I can judge whether it is worth spending me the money to get this facility.

  Anyone know where I can buy one on good terms?

  Hello

  Sorry, but in my opinion you should take some of the information detailed by local vendor because here you can ask a lot of questions and at the same time check all components and the ports you need to watch TV.

  In any case, I'll try to give you my opinion in a few words.

  I agree with you that F10 - 125 is the best. This device has everything that the laptop need including Bluetooth. There is no reason to worry about the TV reception because Qosmio has enough video - in ports that you can use every possibility to watch TV.

  If you want to use cable TV its antenna in the port and you can watch TV on two tracks. First used Qosmio player without OS boot or using MCE that is built into the OS. MCE using it also records option available.

  While watching TV with the help of an external receiver, you can use composite port. To watch TV you can use Qosmio player, but in this case Qosmio player will find a single usable channel and you can choose the programs using the remote control receiver.

  My opinion is generally that the F10 is a great machine. Check also the series G and compare it with the F-series.

  Before buy you Google around and check prices.

• Qosmio F10 and TV connection via SCART?

  I try to display on television. using the output S-video of my Qosmio F10 I have no problem. However my TV S-video entry is at the front behind the door of some panels, so it is much more convenient to use one of the inputs SCART on the back of my TV.

  I've never had problems with one of these entries SCART (it worked perfectly with VCRs, DVDplayers), but now everything I try I can't get it to work with the cable SCART provided with the Qosmio.

  How is it? is there a way I can test it there is a signal on the output in the cable SCART on my Qosmio?

  Hello

  If you want to send the signal to the TV using the SCART, you can use adapter SCART (In/Out). Google a bit and I'm sure you can find the best solution.

  You can also get the best information in some electronics stores. There you can get appropriate technical advice.

• Video output distorted on Qosmio F10

  Hello

  Until recently, my video output on my Qosmio F10 function works beautifully. When I connect my laptop to the TV the other day, using an s-video cable, the image had turned very distorted. The TV picture flickers and sometimes disappears completely.

  My laptop has the graphics card Nvidia GeForce FX Go5700 and I changed no settings what so ever of the point in time when the video output was working properly.

  To debug, I bought a new s-video cable and an adapter SCART. The use of these I've eliminated that the s-video TV in the port is the problem. It seems to me that if something is wrong with the signal from the graphics card.

  I would be very grateful for a diagnosis on this issue.

  Thank you and best regards,

  Johan

  If you are quite sure that the cable is ok, so it could also be a problem with the connection. Maybe lose plug or something like that.
  However, as a first step, you may try to update the page Toshiba graphics card driver.

  It would be very interesting to know if such question will appear on the new OS recovered

• Transfer VHS video to DVD with Qosmio F10

  Hello
  I really need help, I want to transfer my VHS to my Qosmio F10 videos, edit them and then burn to DVD. I have cable supplied with the machine, more I bought a Svideo cable. I have tried all the ways to connect to their place, but without success. Someone would have a go at describing the steps I must follow to do this?
  I'm not a computer expert, simple language not techno would be appreciated.

  Hi Walter,

  You are looking at a three-step process: -.

  1. connect your VHS player to your laptop (S-Video/s-Video is recommended for better quality imagery, but you'll also need to connect the audio cables from your VHS player to your Qosmio for sound.)

  2. change the captured audio and video using a proprietary software package. You may already have Windows Movie Maker installed, but you can also consider other packages of Nero, Ulead, Pinnacle, Roxio, etc.

  3 burn the project finished on a DVD.

  The whole project can be a minefield, so I recommend taking each step in turn and carefully progressing thanks to gain experience.

  Finally, don't download discouraged by the apparent conflicts between the different pieces of hardware and software. The final result will be very rewarding.

  HTH :-)

• Qosmio F10: How to record audio and video and use QosmioPlayer

  I am owner of a Qosmio F10-122 with TV tuner and I really need HELP. I'm Italian.

  The questions are:
  1 QosmioPlayer version 4.0.1 (2005022812) (according to the procedure of the forum) has installed fine but the sensitivity is poor; in any case the question is: is is possible to record videos? Also is it possible to record audio?

  2 input and video output are stupid; I can see Windows and QosmioTV on HDTV via DVI/SCART but I can't input in MCE TV or QosmioPlayer any signal IN Composite; so the question is once again how can record AUDIO from my Home stereo or VCR VHS VIDEO?

  3. I only use VIDEO IN to WATCH is not to save: where is my fault?

  Thanks, Marco

  Hello Marco

  I did some testing and I can tell you about my experience on Qosmio G20.

  1. as far as I know early versions of Qosmioplayer did not have the registration option but now I hope that your preinstalled version has REC option. If so, please be sure that you have about 5 GB of free space for the recorded material.

  It is not important what signal is sent to your Qosmio (TV or VCR VHS-connected) you can find it if you look at the channels. With REC option, you can save what you want. I tested it with my VCR VHS and I recorded some old movies. This material was recorder und great quality was the same as on cassettes. After recording, I started Windows MCE and transferred the material recorded in Windows using Qosmio player utility.

  I have not tried, but I put t think you will be able to record audio using only Qosmioplayer.
  2. you can record movies VHS if you connect your VCR VHS on the Qosmio using the antenna cable. Launch Media center Edition (TV option) and scan channels. In my case, I could watch movies VHS on MCE on channel 31. Using REC option you can save all documents of video cassettes. Later, you can change the recorded material and create own DVDs. It really isn't a problem.

  Your audio Home Audio recording can be a bit more problematic, and if you want it to be on the professional path you will need a device external and of course some professional recording software.
  3. I don't know what to write here. Just try to do what I already descriebed under 1 and 2.

  Good bye

• Qosmio F10 - 136 and D-video output

  I have a Qosmio F10-136, I want to use the D-video output with cable SCART. I ve tried to change BIOS, VIEW the section, but through the various options it s PAL (SCART) NOT. Only PAL (S-Video), 525 p. 750, 1125i, 525i NTSC (US), NTSC (Japan).
  My BIOS version is 1.20, I've followed the instructions of the FAQ5300XK0012R01 and TSB4A00TK000MR0.

  Hello

  Is your unit pre-installed with original recovery media and if the display driver is original Toshiba designed one?

• F10-136 transmitter cable not included?

  I just bought the Qosmio F10-136, according to the Quickstart F10 (number 5) list, there should be an infrared emitter cable, it is not one inside the box
  does anyone know if there must be one and the laptop works using infrared?

  Hello

  You have posted several messages on this topic. In the first post, you want to know the contents of the box of Qosmio F20 - 136 and now something on F10 - 136.
  What cell phone do you have? F20 or F10?

  Nevertheless, the F10 shipped only with the power cable, cable Modem (if current modem) and the video cable. I put t found information on infrared cable and I have never heard such cable.

  As far as I know the Toshiba remote was delivered with this device. This remote, you can use with the Qosmio player.

  Good bye

• Satellite L450 - connection loose if I disconnect the cable

  I just tried to configure my modem on my Satellite L450 wireless and it works well with the ethernet cable, but as soon as I disconnect I lose it.
  I tried 3 cables but nothing.

  What can I please?

  Hi ElaKeen62,

  I m a bit confused now... As a first step, you wrote that your WLAN car works well, but then you wrote something on the Ethernet connection and you have tested 3 cables?

  What exactly is your problem?