LR updates files in the wrong folder when you import by date

Similar Questions

• How could I have a default folder when you import the photos? Example: E/photos/2016

  Lightroom important images in the folder users/me/photos/2016.

  How could I have a default folder when you import the photos? Example: E/photos/2016

  JPcoul1

  Save a preset

  1. make your options in the panels on the right, choose the folder of "Year" etc.

  2. click on the menu drop-down and "Save current settings as a new preset.

  

• 6s + guard stuck in the wrong direction when you turn it on?

  My 6s + keeps stuck in the wrong direction when I come out of my pocket and turn it on. When I held vertically, it's very, very often stuck in landscape mode and even when I flip it back, nothing has changed and I need to activate the button and off to change. Is this a common problem? Is there any fix for it?

  Thank you.

  Try force reboot:

  http://support.Apple.com/en-us/HT201559

• error message saying that it is the wrong key when you use a sticker

  Product key

  I have an OEM version of vista Home premium. I'm trying to load on an acer extensa 5420 using the product key on the bottom of the laptop. When I enter the key, I get an error message saying: it's the wrong key. How can I use this disc to reinstall windows?

  Hello

  The OEM recovery disks are the brand and the specific model

  You can't use a disc from another manufacturer

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• The cursor moves to the wrong place when you type

  > My name is Heather. I have a HP G laptop - 61-428CA. How can I fix a cursor which remains in place in the

  The END of a sentence? It keeps jumping around, making it very difficult to type.

  Hi Heather,

  Try the following.

  First, download the latest installer driver Synaptics, on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp49001-49500/sp49394.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  Once this done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the power adapter and start Notepad.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• Nonprinting buttons appearing in the wrong order when you export to interactive PDF!

  I am a customizable holiday gift certificate creating generic view on our website for download. I create using InDesign CS6. The idea is that the interactive PDF can be opened in the reader, one of the six charts of certificate can be selected (via the radial buttons that hide/show graphics that have been converted into buttons), and various text fields can be filled in. Then, the certificate can be printed and cropped. I have all the interactive elements, works very well, including the "print" key. The interactive PDF looks like this:

  

  However, when printing, I would ONLY the certificates and the fields of text to print and not the instructions, header, or radial buttons selection certificate or full color, background. The point of this is so that the user doesn't lose the ink. I want to print like this:

  

  At first I tried to make nonprinting objects, but which also shows them not when exported to interactive PDF. I then tried the same thing by putting on another layer and uncheck "print layer" (but check "show layer"), but I came across the same result. After searching the forums, I discovered that the only way to make these nonprinting elements, yet still visible in the interactive PDF, is to convert each object to a button and then uncheck the "Printable" box in the window buttons and forms. I did, and now everything seems to work fine...

  Except that when you export, export buttons in order of stacking poorly, like this:

  

  This color background continues to go on in front of all the rest. Even if I put it on it's very own layer under layer with all other charts (converted to buttons) on this subject, he always appears in front of all the other buttons. It is the same whether or not I have check the box create Acrobat layers. What the devil I'm doing wrong?

  http://InDesignSecrets.com/stacking-order-bug-exporting-interactive-PDF.php

• problems to capture the audio layer when you import the m2ts files

  Hi all, I'm new on the side of the entire video editing and so would be grateful for the help.

  I just bought a camcorder Canon HF200 HD, and a Sony Vaio notebook that came with Premiere Elements 7.0 preinstalled.

  Last month I've been shooting sequences and down just to try to change everything and set up a DVD.

  The problem I have right now (and I've just started using the program, so everything is new for me) is that while I seem to be able to import the m2ts file format in which my camera records, only the video is imported by first - no audio (it reads the file ok, no errors appear, but when I go to review images there is video but no sound).

  I can play all my videos in Windows Media Player very well, both video and audio.  So it seems that my machine is able to read the files correctly in this program.  However, it seems that the audio drop out when I import the file in first.  The program was pre-installed on my computer and when I have a look at the audio settings, it doesn't seem to be a possibility to change the settings to something different.

  So far, I've spent a long time googling and trying to find a solution, but without any joy immediately.

  Enjoy the anyone can offer any assistance.  Is it just a simple setting I need to change?  Or I have to somehow convert the files in a different format before Elements 7.0 can read?

  Thank you.

  Jeff

  the machine I have appear to be consistent with the specifications required by PE7 (and given that it came with pre-installed PE7 which should be the case).

  There are two things to consider:

  1.) edition of most of the images, especially material to SD

  2.) editing AVCHD, currently the most demanding of all popular video formats to edit. That's what you have.

  Now when you launch the pre, you get a splash screen. There you can open new create a new project, open an existing project that has been recently opened, or open a project by browsing to it. We can also leave.

  In your case, you go again and when the dialog box opens, choose the preset for AVCHD w / DD 5.1 SS Audio.

  Also note, that in the Edit Mode, there are two Modes of display (access via two icons to the left of the lower panel), view timeline and sceneline view. For DD 5.1 SS Audio Clips, you will find Timeline View Mode to be the best. Now, you can switch back, but the timeline view Mode will give you infinite control. It is estimated that change the most programs use, and most publishers use.

  Good luck

  Hunt

  PS - I highly recommend Steve Grisetti book, The Muvipix.com Guide to Adobe Premiere Elements 7

• Photo images to the draw layer: when you import pictures, it shows me the oldest first, how to show most recent first?

  Hello

  When I import an image from a folder on the ipad, it shows the older image first.

  So I have to scroll through my 1000 images to get to the most recent.

  is there a simple solution to this

  Thank you

  Jay,

  I'm going to make sure that the draw team sees this conversation, but at the present time, there is no way to reverse how images appear in the photo selection process. I'm sorry. I know that you are looking for a frame or something.

  Sue.

• Why my Acrobat files show the wrong name when it is opened?

  This has happened on two different folders in last week (that I actively noticed while working with them). The files are saved and read the hard disk as the name I gave them. When I opened the file to review some information, I have a different name (from a different document) on my window in the bar of tasks and when it is active on the screen.

  Because these files are of two types of businesses and organizations, it sounds unprofessional, if I transfer files to my clients without resolving the issue. Please tell me it's something very simple, I'll even take a 'duh!' so I can fix this before I have to send the files.

  TiA,

  Susan

  You see the title of this file. CSN change you under file - properties -.

  In general.

• mozsqlite3.dll is missing from the installation folder when you install firefox nightly (22.0b2).

  When the upgrade to Firefox 22 (nightly) previous java applet to work now crashes due to lack of library mozsqlite3.dll.

  I guess that this library has been moved to the file XUL.dll within the Office of the Attorney General.

  • https://developer.Mozilla.org/en/docs/Building_with_Profile-Guided_Optimization

• How keep the structure layers when you import files?

  When I copy and paste a piece of another PDF file or HAVE, the layers were always reoganized. Most gone sublayer include their names, resulting in several layers and less organized. Same thing happens when I use the command "Set" to import a file. Is there a way to keep the structure of the layer when importing files? Sorry for my poor English skill. Thank you.

  

  Bluesky,

  In palette dialog box layers, layers of dough remembers is checked? If not, check it and see what happens.

• I can create forms in the designer, but when I use a data model, I can't interact with the form

  In LiveCycle Designer ES2 I can create a form and then preview and interact with the form.

  This guess I just build objects by dragging the pieces pre-made object on the form (for example, text field) - which I can name, wrap in subforms something - I can add actions and all is well.  When I preview the PDF, I can enter data in the fields, click on the radio buttons, making things appear that everything is great.

  But LC ES2 is based on the data driven development model by, so in my case I need a form guide as well as the form - so it's better to have a model of data created in the first place - and then create the form based on the data model - then build guide form based on the data model - it is also a good idea, and I'm cool with that.

  My problem is that when I'm building a data model (just for a quick and dirty development demo, not associated with services back-end or databases) and I create the form based on the data model - I can't interact with all objects in the preview pane form - further when I launch the workspace and call my process that contains the form - I even can't interact with the form.

  What I am doing wrong?

  Summons - I can create a form and interact with it - but If I start with a data model and generate the form based on that - I can't interact with the form (option buttons click-I can not enter data in form fields - etc) what causes this?  What should I do to use a data model and be able to create an interactive form? >

  Does anyone know what causes this problem?  It's driving me crazy.

  Thank you-

  Ben

  You do not hurt anuthing. It works as advertised. When you generate a Guide and work with a fml data model designer you will only create a static non-fillable PDF file. This is because when you import the model in the designer of the model must be turned in a schema. The schema may not represent constraints and validations can be encoded in the model. The only thing that can be maintained is the structure, so Designer forbids you to buidl an interactive form.

  If you know what you're doing, you could take the data it is generated from the Guide and merge on a XDP template file that you create (unless he models in a first time - you can use the sample XML data as a starting point) using LC forms. Edowmside, is that if there are constraints and rules you would have to code them in the model as well. That's the way it is now there, but it will improve over time, as more of the ability of the model is exposed to the XFA world.

  Hope that helps

  Paul

• Can add you automatically some than Tags based on folder name when you import into PSE12?

  I thought that I used to be able to add tags automatically, based on the name of the folder, when you import? I can't ind now. Was this wishful thinking?

  Chris@Badgers wrote:

  I thought that I used to be able to add tags automatically, based on the name of the folder, when you import? I can't ind now. Was this wishful thinking?

  What is possible when you download from the camera or a card reader, is to use the options in the Advanced section. You can add images to a selected album and you can use a template to import IPTC metadata; right of author and writer.

  This is not based on the name of the folder.

  What you can do when you have displayed your subfolders in the left panel is to highlight the subfolder and create an 'instant album' with the name of the subfolder.

  Ask if you need more details.

• Avoid duplicates when you import XMLs?

  There are a few versions, we have fixed the problem to get the duplicate items when you import new projects in another.  This was very helpful.

  However, I have noticed that when you import XMLs, first does not apply the same level of... discretion

  Is it possible to get XMLs for import without creating duplicate items?  I found a workaround by first import the XML file into a new project and then import this project first to my main project... but when I'm in a great documentary film which takes 3-4 minutes to open each time, it's not ideal.

  This is particularly important for people using the Pluraleyes because organize us images in first and then export to the EP, and then must bring with XMLs, and it would be great if we didn't have to do a bunch of media management manual to avoid duplicates in the project file.

  
  Thank you!

  R

  Hi Ryan,

  Get your feature to the appropriate string request by filling out this form: http://adobe.ly/feature_request

  Thank you

  Kevin

• Error message when you import a glide (attached)

  Announcement on behalf of the colleague who gets the following error when you import slides of cp:

  

  any help appreciated

  Thank you

  Hi costs.

  Instead of importing your slides, try to copy and paste them from the original of the project file in a new instance of Adobe Captivate and see if that makes a difference.

  Let us know how you go.

  Best regards

  Mark