LR4 will make virtual copies
I installed LR4.4 and now it will not create virtual copies. He said that this was the case, but none does not appear. Show badges is always checked in display options.
Make sure that you have disabled filters and/or ensure that you operate not out a smart collection that excludes the VCs.
Tags: Photoshop Lightroom
Similar Questions
-
How to make virtual copies of the files separate and "real".
I have seen that LR doesn't let me drag a virtual copy of one folder to another. How one converts virtual in a 'real' file while retaining the original? And besides, it is not clear to me what could be the equivalent of "save under" in LR [or have I just failed to locate it?]
Yes, but you will need to re - import tiff format that would lose the advantage of a virtual circuit that is stored as a metadata only. It would be better to save as a snapshot in the history panel and when you resume with additional editing, make a second snapshot. You can then return to each stage at any time.
-
convert images in virtual copies in a collection
When you create collections in LR5 + you create a pointer to the master file. If you make changes to the images in a collection you change the master. To avoid this you can convert images in a collection to a virtual copies that will be virtual copy
I don't know if it was a question? In case, it was...
You can not turn directly copy (convert) an image inside a Collection, in a virtual. A master or a virtual copy (or both) can be added to a collection. There is a 'switch' master status command and copy a version of the given image - but if you have done such an image inside of a Collection version, you also would do the same for the image version outside of the Collection, as well.
If master images have been added to a Collection, it is possible to make virtual copies of those - then that, if this is done by working 'inside' collection, will result in membership (a little) this special collection, can be inherited by the new virtual copies. Images of masters could then be removed from the collection, leaving only copies. These copies would of course also be considered, alongside their masters, when the relevant image file was seen.
As part of creating a new Collection, there is an option to add the images highlighted. Beneath this, is an option for this have to happen in the form of new virtual copies - rather than add the masters of these images to the Collection. Was it that you were talking to the OP?
-
F2240 HP all in one printer is possible that I can make 2 copies faces
Is it possible I can make 2 copies faces even if I have to take one sheet at a time and return the paper?
Hello LolaBeMe,
Yes, your printer will make two copies of faces.
Go to page 41 of the manual for instructions on how to "print on both sides of the page.
http://h10032.www1.HP.com/CTG/manual/c01438223.PDF
It will be useful.
-
LR 6 - the search for virtual Copies will not work
I exported a few photos to a customer including some virtual copies where I converted to black and white.
But when the customer sends the pictures, I have a text string which has the names of files and the virtual copy file name, IE. Flower-0001-2
However I insert this string into the search field, but the virtual copies do not appear.
I could export the virtual copies and add them back in the catalog, but is there another way to get the search to pick up these filenames on the first shot?
Yes it works for me now except if there is an easier way. Thought I'd share how I did it.
(1) I export, add to the catalogue and in another file and download all the photos on my wordpress site.
(2) customer selects the Favorites and I get an email that contains a text string (this text string includes all the masters and vc file names)
(3), I then take this text string copy and paste into the search field on this new folder, I created on export.
(4) all customer photos they have selected appear. Fact.
-
Oh God, can you PLEASE help me? I can't contact Adobe by phone, m too late and he said everybody is busy with other things, try later... well.
I consider that I could possibly read and NOTHING is useful.
1 made virtual copies, count goes up, can't see them in the library grid, develop, or under the microscope. Thought they were stacked, but when I went to Photo > stacking > the rest is all grey... cannot do anything. "set as master copy" also grayed out. Read somewhere 'preferences for lightroom can be corrupted? I tried to do the thing in the library to correct the preferences: (on moubntain lion 10.8.3), in the user file there is no library... so I then looked up how to find the hidden library, but I can't find stuff to do! And there's a library on my hard drive, but when I opened upward, there is nothing on preferences.
I JUST bought this 2 mos ago - how it can have preferences corrupt when I just started to use it? -used once, then discovered diddn t have good processor in old computer... bought a new computer... took several weeks to get (bought more ram)... now I'm just using for the first time today. Has started to import, but they are all coming photoi missing (when I had lightroomn installed on your old computer, I deleted ITU and photos), then reinstalled and it was migrated to the new computer. I looked at how massive transfer lack of photos and there is NO folder with a question mark, so I have to make hundreds and hundreds can manually - I tell you that I really hate LR4.4? Now I'm hating photography and LR and I am beyond upset. I came back from vacation a month ago and STILL have not been able to process my photos!
Unhappy mother of King Toutankhamon - p.s.PLEEZ help be4 I have a nervous breakdown!
When you have problems not being only unable to see virtual copies, you have "All photographs" selected in the Module catalogue library panel (left)?
-
Batch modify virtual copies to teachers
Hi all
I recently merged two catalogs and I'm trying to deal with all virtual copies created by the process.
Basically, I merged my main catalog, which will automatically create xmp in the file, with a catalogue containing many duplicates but with no metadata on them, essentially creating a conflict.
Lightroom processes the conflict by creating virtual copies of the duplicate files and moving all the metadata on them, leaving UN masters in the catalogue and the directory. So now, I have all my ratings, tags, keywords and information of the collection of 8 000 images on the virtual copies, not on the masters...
I want to get rid of the virtual copies and re - write metadata on the masters but can't seem to find an easy way to do it.
That's what I tried so far
1. define the virtual copies as masters
That would be my favorite way to do it and then go and remove the virtual copies safely. Unfortunately, I can't be able to do this on several virtual copies at a time.
2 remove the master
I thought that maybe if I removed the master, the virtual copy automatically take his place. They both refer to the same file... But none. Remove the master, removes them as well. I guess it's perfectly logical on any scenario!
3 save metadata about the file of VC
Unfortunately, you cannot perform this action
4. synchronization of metadata in the stacks by using plugin Syncomatic
This would be to merge the key words, which is an important step! But other metadata, control would replace the VC, the meaning to lose them. Fortunately, you can only choose to synchronize key words, so that's something. The main question here is of all collections. I have to go and add them manually.
That's what I got so far, so I need some inspiration, you guys!
Are there easy ways to do what I did and did not know?
Is there a way to virtual copies of batch changes to the masters?
Is it possible to synchronization metadata with a choice of how to resolve conflicts?
Is there a way to put images superimposed in the collections where appears a single image of the battery? Or any workaround for synchronization of collections quickly? Once again, with the choice of the VC being chosen in case of conflict.
Or any other solutions, plug-ins etc? I would really appreciate your help
I have merged my main catalog, which will automatically create xmp in the file, with a catalogue containing many duplicates but with no metadata on them, essentially creating a conflict. Lightroom processes the conflict by creating virtual copies of the duplicate files and moving all the metadata on them, leaving UN masters in the catalogue and the directory. So now, I have all my ratings, tags, keywords and information of the collection of 8 000 images on the virtual copies, not on the masters...
Rather than trying to fix the result of the merger, you have already done, it might be useful to take a step back and reconsider how you did the merger. (This is assuming that you have a backup two catalogs that allows you to go back to, right?)
To test my understanding, you have two catalogs, call them A and B. B a lot of pictures of A duplicate, and these duplicates have no metadata and are not placed in the collections that they are in A. While in A, you have imported B, by selecting the option Replace: metadata settings and develop. The pictures that were in B but not got merged into A very well. But if a peak has been in the two catalogues, his master had its metadata replaced by B 'empty' metadata, with a virtual copy that is created that contains the metadata of origin. Even worse, that master has been removed collections is, replaced by its virtual copy.
To avoid this, why not just select the option Replace: nothing? In this way, only the photos in B that are not in a will get imported into A.
If my interpretation is not correct, then provide details of the scenario, using the same terms (A and B).
-
I want to try to apply different effects to the image itself, so I made a virtual copy of an image.
1. is this a virtual copy remain in the catalogue until deletion?
2. my virtual copy has all the effects applied to the original image, and there is no available on the virtual copy history to return to the original. I'm trying to make changes in order to compare the two, although I'd rather not have to remove all the effects that I applied to the original, is there a way to get around this?
Thank you.
Hi kat from media,.
1. Yes, the virtual copies remain in the catalog. However, they do not take a lot of space. All that is necessary for a VC is the list of the adjustments you see in the history panel, because it is based on the same original file.
2. it is a more difficult question. As you noted, fist in the historical a VC Panel is "Create a virtual copy", and it carries with it all the settings of the master (but without the detailed steps included in the history).
I can't think a good way to get the steps of the exact story of an original copied on a virtual copy, without taking the steps one at a time manually. However, you can change any effect later (without loss) for both images. So I don't know why you would need from the history list. Can you provide an example of what you're trying to do? Maybe we can find another way.
Mike
-
Why doe LR automatically creates unwanted virtual copies when I make adjustments?
This is a safety feature deliberate whenever you have Soft Proofing turned on. The appearance of the image changes on the fly, and adaptations made in response to it may be inappropriate for the image when not not visible in the test (and / or in the test to a different output). So the current settings are protected, and a new separate copy is offered instead.
Press S to turn on or off this world. The normal operating mode is turned off. The background of the document / surround changes to the white paper when the Soft Proofing is enabled.
Virtual copies made this way are automatically associated with the particular test in effect configuration when they were created and are recognizable to that used as the name of the copy.
-
Virtual copies don't appear not
So, go along and make some changes by creating virtual copies and now new copies I do are not displayed. He stopped this and now he's doing it again. I've accidentally made six virtual copies, can it stack them, but would not be desempilement when I right-click. With this picture, I created a virtual copy, but in the grid it appears not at all:
But make other virtual copies of the other day:
I have no idea why this happened. How to make all my photos, including all virtual copies is displayed in the grid? Unstacking is not an option:
I'm so confused. Thank you.
You are in a collection when you create the virtual copy?
You have enabled filters?
-
Dear community,
I use a Mac with 5.7 of Lightroom which is configured to store all the metadata in the xmp files. The Lightroom Catalog is stored locally on the Mac and contains only references to images and their xmp files that are stored on a network device. There is another Mac with the same setup with a local separate Lightroom Catalog and access to the same images on the network device.
At a starting point, the two Lightroom catalogs are identical - they refer to the same images on the network device and contain the same metadata.
When I update the properties of the image on the first Mac, these changes are reflected in the xmp file. After using the option 'synchronize' with activated "metadata synchronization" on the second Mac, the modified image properties are visible on the second Mac. It is very good.
However, when I create a virtual copy on the first Mac, I realize that the corresponding xmp file is updated. However, even after the synchronization, the virtual copy is not visible on the second Mac. I can change the properties of the image of the original image and get these changes replicated to the second Mac, but the virtual copies remain the first Mac.
What should I do also virtual copies get synchronized?
Thank you very mich for your support.
Best regards
Peter
However, when I create a virtual copy on the first Mac, I realize that the corresponding xmp file is updated.
As far as I know, xmp does not contain information about the virtual copies. If this method to attempt to synchronize two catalogs will not work.
Better you should use the file-> Export catalog on a single computer and then file-> import from another catalog on another computer.
-
Virtual copies are stored in the backups? How can I insert a backup in an existing catalog
I deleted a tif image file that I didn't intend, which had several virtual copies of LR, created from it. Virtual copies had a lot of history important that my impression of the preparation of changes to the document. These virtual copies are saved in the LR backup?
If so, how can I insert in the catalog that I use? I did a lot of changes in the two days since my last backup and don't want to lose this story either. Are you suggesting that I do a backup current prior to extraction of files since I last saved? I know I'm supposed to go to the backup location and open the last backup, but how work with the work during the last 2 days?
Any help would be most appreciated. Thank you, TomHuff says:
This may have been a mistake
It was, but not catastrophic.
Photos in Lightroom are defined by a database ID, not a file name, so you cannot rename them in order to be considered of the same picture as before.
So, theoretically, if master and virtual copy pictures are in your backup, you should be able to import all of them (copies of masters and virtual) - make sure that you remove first did re-imported in your catalog and make sure the name of the source file for tif on disc is identical to the front.
Huff says:
- The section has new Photos, which gives 2 choices of file manipulation: a) add new pictures to the catalog without moving them or b) not to import new photos
- Replacement of A changed existing pictures of the article with 2 options: a) nothing or metadata (b) and develop the power only. If you choose this option you can check a box to preserve old settings as a virtual copy.
1. a) add without moving
2. I thought you were only to add backup photos which no longer exist in the catalog (current) target, in which case it should be no replacement.
R
-
To find virtual Copies to smart Collections
Is it possible to find virtual copies in collections smart without use "name of the copy is not empty? Basically, I'm using the name of the copy as a version number for all images, including the base image which is the original. But what makes it so difficult to find the actual copies themselves. Any ideas?
Thank you
Is Andy? wrote:
I'll see if a smart collection can work to a saved filter, which allows to correctly identify the real VCs.
Don't know what that means, but if you want "Virtual copy is" metadata available for (native standard Lr) smart collections, it is available through
The only downside is that the metadata are not updated immediately, if you need to 'manage' the update of metadata and/or expectations.
Funny - I just came across the need for this last night - I solved it by ensuring that all virtual copy names are distinguishable master copy names, yet: because of the text metadata from Lightroom treatment of gaps (e.g., space management and bug "Big mallards"), it is really better to have a yes / no rule.
See you soon,.
Rob
-
After engraved original master with any authorized copy, how to make 1000 copies?
I'm a DVD DL to create a Yoga Institute, after engraving original master copies to help smokers unconditionally, CGMS - CSS terms, how to make 1000 copies.
If I buy DVD Duplicator (Replicator port?) and connect it to the PC via USB, and then use the burner duplicator to make copies, how it works. As I tried on www days after days, burn my eyes, all the information is confusing source.
It's challenging project and I am newly entering the market. Therefore, my death or life. Help, please.
OS WIN7 64 bit, CS5.5 Master Collection
Still Version 5.1.0.342
Thanks in advance
with no copies allowed,
The reminder for any copy setting has no effect when you burn discs.
It is true that you burn on a computer or use a multi disc duplicator burning discs.
Only replication (pressing) can add copy protection.
You need the details of the / file format you need to produce company that will make the replication for you. Once these had to be delivered to the House of replication on a special adhesive tape. Now there are other options.
-
Virtual copies not found in the Windows folder.
I don't remember having met this before, so I'm going: I just created a virtual copy of some photos of my summer vacation and everything works fine. But when I need to access these photos right window (Windows / my images thats), virtual copies do not appear in my folder YYYYMM. Back to LR if they will appear there with an extension of 1/Copy. Right to the VC, then "Display in explore" will highlight the original folder, the VC is always not there. Part of the frustration is I don't remember what happens before (or) so I wonder if I accidentally changed settings.
Running LR 4.1 under Windows 7 64-bit.
Thanks in advance.
Virtual copies are "virtual". They do not exist in the records; so you can't look into a Windows folder to find them (and in fact, I think it's a bad idea for Lightroom users to browse the folders in Windows in any case, when you browse browsing in Lightroom).
If you remember you could do before, that is, you're wrong to remember, there is never a convenient where the virtual copies appear in the windows.
If for any reason, you need a photo for use outside of Lightroom (a photo, virtual or 'original' copy), you would have to export it.
Maybe you are looking for
-
I7 processor with integrated graphics16 GB memorySSD and hard drive with lots of memorya computer connected to the internet At the upgrade to firefox 13 and 14. Speedtest and downloadspeed are extremely slow. On the same computer at the same time is
-
Satellite A215-S4757 SD card reader does not work correctly
Hello world I have a Toshiba Satellite A215-S4757. I recently had a duo memory stuck in the SD card slot and got out. Now when I insert a card into the laptop shows no signs of reading. I don't know if it is damaged or simply not work (but in Device
-
Former owners name is on a lot of Windows files on the hard drive. I tried to rename it but it wouldn't let me.
-
set the default recording time in windows sound recorder
Looking for a way to increase the default value to the recording of the sounds found in XP home recorder. There is no documentation that I can find to the configuration
-
Windows Mail: cannot send an email with 2 attachments with the file size 393KO and 345 KB
I'm a Representaive Service Microsoft client displaying a number on behalf of the client. Details in the following way: Customer problem: "my windows mail won't allow mw email with parts 2 attachments 1 @ 393kb and the other 345kb... why? I sent the