LRT224 Support for multiple subnets

I'm considering buying a LRT224, but need help with something.

The network that I have managed has about 200 aircraft currently, with mixed brands and types of switches, access points, etc., scattered. It is a small school that had a lot of different people by running, other not so good, other better. Now, I managed it.

We would like to add more devices, but currently we are limited to 254 devices. In the manual of LRT224, it - looks - like you can specify manually the subnet mask and the range of DHCP servers. For example, I could change the subnet mask 255.255.252.0 or one 22 subnet, and then specify the range being DHCP, for example 192.168.1.2 alone, through 192.168.4.254, for 1024 addresses total? I want to do this without using VLANs, because I'm not sure if any of the switches support VLAN tagging, and I have no experience with the VLAN.

Let me know, thanks!

IPsec VPN site to site, LRT224 tunnels supports greater than 255.255.255.0 subnet masks. However the subnets the side LAN of LRT224 are limited to a class C subnet by VLAN.

Tags: Linksys Products

Similar Questions

Download Support for multiple devices?

I can download a theme for one device. But when I try to download more files JAD/COD to cover more than peripheral, I always get a message that failed at the end once everything is done. Can someone please give me the instructions step by step how add support for devices more (for an existing theme). Please be as complete as possible, thank you

Thus, for example, you want the theme for the 89xx, 96xx and 9700 5.0 would export you just once for the OS 5.0.. can make a separate export in a different folder for the 4.6/4.7 OS unless I am not quite understand what you're saying

NB520 - support for multiple monitors

NB520 they supported multiple monitors built in, if not, how can I have multiple monitor support my NB520? I need to use a Pewerpoint 2007 (presenter to display mode differs from the public view).

Thanks a lot for a response in advance.

Hi smit_Aood,

The NB520 supports an external monitor and you can use the internal monitor + external at the same time (both monitors are supported). In addition, you can choose if you want to extend the desktop on the secondary monitor or to clone.

Using the FN + F5 key combination, you can switch between different modes.

Last but not least, you can use also a video projector or a TV as a second monitor. A certain computer screen is not necessary. ;)

Support for multiple versions of an application

Hello

If I have an application that has complained about the os 5.0, but uses of the Mineral which are not available on os4.7. Can I change the code base is compatible 4.7. But the app to 4.7 compliance of refactoring removes some of the features of version 5.0. Do I have to release multiple versions of the same application on the app store, for each version of the application is supported by a particular operating system version?

Thanks for any help

Details of penetration OS here:

http://us.BlackBerry.com/developers/choosingtargetos.jsp

Cisco ASA 5505 site for multiple subnet of the site.

Hello. I need help to configure my cisco asa 5505.

I set up a VPN between two ASA 5505 tunnel

Site 1:

Subnet 192.168.77.0

Site 2:

Have multiple VLANs and now the tunnel goes to vlan400 - 192.168.1.0

What I need help:

Site 1, I need to be able to reach a different virtual LAN on site 2. vlan480 - 192.168.20.0

And 1 site I have to reach 192.168.77.0 subnet of vlan480 - 192.168.20.0

Vlan480 is used for phones. In vlan480, we have a PABX.

Is this possible to do?

Any help would be much appreciated!

Config site 2:

: Saved

:

ASA Version 7.2 (2)

!

ciscoasa hostname

domain default.domain.invalid

activate the password encrypted x

names of

name 192.168.1.250 DomeneServer

name of 192.168.1.10 NotesServer

name 192.168.1.90 Steadyily

name 192.168.1.97 TerminalServer

name 192.168.1.98 eyeshare w8

name 192.168.50.10 w8-print

name 192.168.1.94 w8 - app

name 192.168.1.89 FonnaFlyMedia

!

interface Vlan1

nameif Vlan1

security-level 100

IP 192.168.200.100 255.255.255.0

OSPF cost 10

!

interface Vlan2

nameif outside

security-level 0

IP address 79.x.x.226 255.255.255.224

OSPF cost 10

!

interface Vlan400

nameif vlan400

security-level 100

IP 192.168.1.1 255.255.255.0

OSPF cost 10

!

interface Vlan450

nameif Vlan450

security-level 100

IP 192.168.210.1 255.255.255.0

OSPF cost 10

!

interface Vlan460

nameif Vlan460-SuldalHotell

security-level 100

IP 192.168.2.1 255.255.255.0

OSPF cost 10

!

interface Vlan461

nameif Vlan461-SuldalHotellGjest

security-level 100

address 192.168.3.1 IP 255.255.255.0

OSPF cost 10

!

interface Vlan462

Vlan462-Suldalsposten nameif

security-level 100

192.168.4.1 IP address 255.255.255.0

OSPF cost 10

!

interface Vlan470

nameif vlan470-Kyrkjekontoret

security-level 100

IP 192.168.202.1 255.255.255.0

OSPF cost 10

!

interface Vlan480

nameif vlan480 Telefoni

security-level 100

address 192.168.20.1 255.255.255.0

OSPF cost 10

!

interface Vlan490

nameif Vlan490-QNapBackup

security-level 100

IP 192.168.10.1 255.255.255.0

OSPF cost 10

!

interface Vlan500

nameif Vlan500-HellandBadlands

security-level 100

192.168.30.1 IP address 255.255.255.0

OSPF cost 10

!

interface Vlan510

Vlan510-IsTak nameif

security-level 100

192.168.40.1 IP address 255.255.255.0

OSPF cost 10

!

interface Vlan600

nameif Vlan600-SafeQ

security-level 100

192.168.50.1 IP address 255.255.255.0

OSPF cost 10

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

switchport access vlan 500

switchport trunk allowed vlan 400,450,460-462,470,480,500,510,600,610

switchport mode trunk

!

interface Ethernet0/3

switchport access vlan 490

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

passwd encrypted x

passive FTP mode

clock timezone WAT 1

DNS server-group DefaultDNS

domain default.domain.invalid

permit same-security-traffic inter-interface

permit same-security-traffic intra-interface

Lotus_Notes_Utgaaande tcp service object-group

UT og Frim Notes Description til alle

area of port-object eq

port-object eq ftp

port-object eq www

EQ object of the https port

port-object eq lotusnotes

EQ Port pop3 object

EQ pptp Port object

EQ smtp port object

Lotus_Notes_inn tcp service object-group

Description of the inn og alle til Notes

port-object eq www

port-object eq lotusnotes

EQ Port pop3 object

EQ smtp port object

object-group service Reisebyraa tcp - udp

3702 3702 object-port Beach

5500 5500 object-port Beach

range of object-port 9876 9876

object-group service Remote_Desktop tcp - udp

Description Tilgang til Remote Desktop

3389 3389 port-object range

object-group service Sand_Servicenter_50000 tcp - udp

Description program tilgang til sand service AS

object-port range 50000 50000

VNC_Remote_Admin tcp service object-group

Description Fra ¥ oss til alle

5900 5900 port-object range

object-group service Printer_Accept tcp - udp

9100 9100 port-object range

port-object eq echo

ICMP-type of object-group Echo_Ping

echo ICMP-object

response to echo ICMP-object

object-group service Print tcp

9100 9100 port-object range

FTP_NADA tcp service object-group

Suldalsposten NADA tilgang description

port-object eq ftp

port-object eq ftp - data

Telefonsentral tcp service object-group

Hoftun description

port-object eq ftp

port-object eq ftp - data

port-object eq www

EQ object of the https port

port-object eq telnet

Printer_inn_800 tcp service object-group

Fra 800 thought-out og inn til 400 port 7777 description

range of object-port 7777 7777

Suldalsposten tcp service object-group

Description send av mail hav Mac Mail at - Ã ¥ nrep smtp

EQ Port pop3 object

EQ smtp port object

http2 tcp service object-group

Beach of port-object 81 81

object-group service DMZ_FTP_PASSIVE tcp - udp

55536 56559 object-port Beach

object-group service DMZ_FTP tcp - udp

20 21 object-port Beach

object-group service DMZ_HTTPS tcp - udp

Beach of port-object 443 443

object-group service DMZ_HTTP tcp - udp

8080 8080 port-object range

DNS_Query tcp service object-group

of domain object from the beach

object-group service DUETT_SQL_PORT tcp - udp

Description for a mellom andre og duett Server nett

54659 54659 object-port Beach

outside_access_in of access allowed any ip an extended list

outside_access_out of access allowed any ip an extended list

vlan400_access_in list extended access deny ip any host 149.20.56.34

vlan400_access_in list extended access deny ip any host 149.20.56.32

vlan400_access_in of access allowed any ip an extended list

Vlan450_access_in list extended access deny ip any host 149.20.56.34

Vlan450_access_in list extended access deny ip any host 149.20.56.32

Vlan450_access_in of access allowed any ip an extended list

Vlan460_access_in list extended access deny ip any host 149.20.56.34

Vlan460_access_in list extended access deny ip any host 149.20.56.32

Vlan460_access_in of access allowed any ip an extended list

vlan400_access_out list extended access permit icmp any any Echo_Ping object-group

vlan400_access_out list extended access permit tcp any host NotesServer object-group Lotus_Notes_Utgaaande

vlan400_access_out list extended access permit tcp any host DomeneServer object-group Remote_Desktop

vlan400_access_out list extended access permit tcp any host TerminalServer object-group Remote_Desktop

vlan400_access_out list extended access permit tcp any host http2 object-group Steadyily

vlan400_access_out list extended access permit tcp any host NotesServer object-group Lotus_Notes_inn

vlan400_access_out list extended access permit tcp any host NotesServer object-group Remote_Desktop

vlan400_access_out allowed extended access list tcp any host w8-eyeshare object-group Remote_Desktop

vlan400_access_out allowed extended access list tcp any host w8 - app object-group Remote_Desktop

vlan400_access_out list extended access permit tcp any host FonnaFlyMedia range 8400-8600

vlan400_access_out list extended access permit udp any host FonnaFlyMedia 9000 9001 range

vlan400_access_out list extended access permitted tcp 192.168.4.0 255.255.255.0 host DomeneServer

vlan400_access_out list extended access permitted tcp 192.168.4.0 255.255.255.0 host w8 - app object-group DUETT_SQL_PORT

Vlan500_access_in list extended access deny ip any host 149.20.56.34

Vlan500_access_in list extended access deny ip any host 149.20.56.32

Vlan500_access_in of access allowed any ip an extended list

vlan470_access_in list extended access deny ip any host 149.20.56.34

vlan470_access_in list extended access deny ip any host 149.20.56.32

vlan470_access_in of access allowed any ip an extended list

Vlan490_access_in list extended access deny ip any host 149.20.56.34

Vlan490_access_in list extended access deny ip any host 149.20.56.32

Vlan490_access_in of access allowed any ip an extended list

Vlan450_access_out list extended access permit icmp any any Echo_Ping object-group

Vlan1_access_out of access allowed any ip an extended list

Vlan1_access_out list extended access permit tcp any host w8-print object-group Remote_Desktop

Vlan1_access_out deny ip extended access list a whole

Vlan1_access_out list extended access permit icmp any any echo response

Vlan460_access_out list extended access permit icmp any any Echo_Ping object-group

Vlan490_access_out list extended access permit icmp any any Echo_Ping object-group

Vlan490_access_out list extended access permit tcp any host 192.168.10.10 object-group DMZ_FTP

Vlan490_access_out list extended access permit tcp any host 192.168.10.10 object-group DMZ_FTP_PASSIVE

Vlan490_access_out list extended access permit tcp any host 192.168.10.10 object-group DMZ_HTTPS

Vlan490_access_out list extended access permit tcp any host 192.168.10.10 object-group DMZ_HTTP

Vlan500_access_out list extended access permit icmp any any Echo_Ping object-group

vlan470_access_out list extended access permit icmp any any Echo_Ping object-group

vlan470_access_out list extended access permit tcp any host 192.168.202.10 - group Remote_Desktop object

Vlan510_access_out list extended access permit icmp any any Echo_Ping object-group

vlan480_access_out of access allowed any ip an extended list

Vlan510_access_in of access allowed any ip an extended list

Vlan600_access_in of access allowed any ip an extended list

Vlan600_access_out list extended access permit icmp any one

Vlan600_access_out list extended access permit tcp any host w8-print object-group Remote_Desktop

Vlan600_access_out list extended access permitted tcp 192.168.1.0 255.255.255.0 host w8-printing eq www

Vlan600_access_out list extended access permitted tcp 192.168.202.0 255.255.255.0 host w8-printing eq www

Vlan600_access_out list extended access permitted tcp 192.168.210.0 255.255.255.0 host w8-printing eq www

Vlan600_access_in_1 of access allowed any ip an extended list

Vlan461_access_in of access allowed any ip an extended list

Vlan461_access_out list extended access permit icmp any any Echo_Ping object-group

vlan400_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.77.0 255.255.255.0

outside_20_cryptomap_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.77.0 255.255.255.0

outside_20_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.77.0 255.255.255.0

access-list Vlan462-Suldalsposten_access_in extended ip allowed any one

access-list Vlan462-Suldalsposten_access_out extended permit icmp any any echo response

access-list Vlan462-Suldalsposten_access_out_1 extended permit icmp any any echo response

access-list Vlan462-Suldalsposten_access_in_1 extended ip allowed any one

pager lines 24

Enable logging

asdm of logging of information

MTU 1500 Vlan1

Outside 1500 MTU

vlan400 MTU 1500

MTU 1500 Vlan450

MTU 1500 Vlan460-SuldalHotell

MTU 1500 Vlan461-SuldalHotellGjest

vlan470-Kyrkjekontoret MTU 1500

MTU 1500 vlan480-Telefoni

MTU 1500 Vlan490-QNapBackup

MTU 1500 Vlan500-HellandBadlands

MTU 1500 Vlan510-IsTak

MTU 1500 Vlan600-SafeQ

MTU 1500 Vlan462-Suldalsposten

no failover

Monitor-interface Vlan1

interface of the monitor to the outside

the interface of the monitor vlan400

the interface of the monitor Vlan450

the interface of the Vlan460-SuldalHotell monitor

the interface of the Vlan461-SuldalHotellGjest monitor

the interface of the vlan470-Kyrkjekontoret monitor

Monitor-interface vlan480-Telefoni

the interface of the Vlan490-QNapBackup monitor

the interface of the Vlan500-HellandBadlands monitor

Monitor-interface Vlan510-IsTak

Monitor-interface Vlan600-SafeQ

the interface of the monitor Vlan462-Suldalsposten

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm - 522.bin

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

vlan400_nat0_outbound (vlan400) NAT 0 access list

NAT (vlan400) 1 0.0.0.0 0.0.0.0 dns

NAT (Vlan450) 1 0.0.0.0 0.0.0.0 dns

NAT (Vlan460-SuldalHotell) 1 0.0.0.0 0.0.0.0

NAT (Vlan461-SuldalHotellGjest) 1 0.0.0.0 0.0.0.0

NAT (vlan470-Kyrkjekontoret) 1 0.0.0.0 0.0.0.0

NAT (Vlan490-QNapBackup) 1 0.0.0.0 0.0.0.0 dns

NAT (Vlan500-HellandBadlands) 1 0.0.0.0 0.0.0.0

NAT (Vlan510-IsTak) 1 0.0.0.0 0.0.0.0

NAT (Vlan600-SafeQ) 1 0.0.0.0 0.0.0.0

NAT (Vlan462-Suldalsposten) 1 0.0.0.0 0.0.0.0

static (vlan400, external) 79.x.x.x DomeneServer netmask 255.255.255.255

static (vlan470-Kyrkjekontoret, external) 79.x.x.x 192.168.202.10 netmask 255.255.255.255

static (vlan400, external) 79.x.x.x NotesServer netmask 255.255.255.255 dns

static (vlan400, external) 79.x.x.231 netmask 255.255.255.255 TerminalServer

static (vlan400, external) 79.x.x.234 Steadyily netmask 255.255.255.255

static (vlan400, outside) w8-eyeshare netmask 255.255.255.255 79.x.x.232

static (Vlan490-QNapBackup, external) 79.x.x.233 192.168.10.10 netmask 255.255.255.255 dns

static (Vlan600-SafeQ, external) 79.x.x.235 w8 - print subnet mask 255.255.255.255

static (vlan400, outside) w8 - app netmask 255.255.255.255 79.x.x.236

static (Vlan450, vlan400) 192.168.210.0 192.168.210.0 netmask 255.255.255.0

(Vlan500-HellandBadlands, vlan400) static 192.168.30.0 192.168.30.0 netmask 255.255.255.0

(vlan400, Vlan500-HellandBadlands) static 192.168.1.0 192.168.1.0 netmask 255.255.255.0

(vlan400, Vlan450) static 192.168.1.0 192.168.1.0 netmask 255.255.255.0

static (vlan400, external) 79.x.x.252 FonnaFlyMedia netmask 255.255.255.255

static (Vlan462-Suldalsposten, vlan400) 192.168.4.0 192.168.4.0 netmask 255.255.255.0

static (vlan400, Vlan462-Suldalsposten) 192.168.1.0 192.168.1.0 netmask 255.255.255.0

static (vlan400, Vlan600-SafeQ) 192.168.1.0 192.168.1.0 netmask 255.255.255.0

static (Vlan600-SafeQ, vlan400) 192.168.50.0 192.168.50.0 netmask 255.255.255.0

static (Vlan600-SafeQ, Vlan450) 192.168.50.0 192.168.50.0 netmask 255.255.255.0

static (Vlan600-SafeQ, vlan470-Kyrkjekontoret) 192.168.50.0 192.168.50.0 netmask 255.255.255.0

static (Vlan450, Vlan600-SafeQ) 192.168.210.0 192.168.210.0 netmask 255.255.255.0

static (vlan470-Kyrkjekontoret, Vlan600-SafeQ) 192.168.202.0 192.168.202.0 netmask 255.255.255.0

Access-group interface Vlan1 Vlan1_access_out

Access-group outside_access_in in interface outside

Access-group outside_access_out outside interface

Access-group vlan400_access_in in the vlan400 interface

vlan400_access_out group access to the interface vlan400

Access-group Vlan450_access_in in the Vlan450 interface

Access-group interface Vlan450 Vlan450_access_out

Access-group interface Vlan460-SuldalHotell Vlan460_access_in

Access-group interface Vlan460-SuldalHotell Vlan460_access_out

Access-group interface Vlan461-SuldalHotellGjest Vlan461_access_in

Access-group interface Vlan461-SuldalHotellGjest Vlan461_access_out

Access-group vlan470_access_in in interface vlan470-Kyrkjekontoret

vlan470_access_out access to the interface vlan470-Kyrkjekontoret group

access to the interface vlan480-Telefoni, vlan480_access_out group

Access-group interface Vlan490-QNapBackup Vlan490_access_in

Access-group interface Vlan490-QNapBackup Vlan490_access_out

Access-group interface Vlan500-HellandBadlands Vlan500_access_in

Access-group interface Vlan500-HellandBadlands Vlan500_access_out

Access-group interface Vlan510-IsTak Vlan510_access_in

Access-group interface Vlan510-IsTak Vlan510_access_out

Access-group Vlan600_access_in_1 interface Vlan600-SafeQ

Access-group Vlan600_access_out interface Vlan600-SafeQ

Access-group Vlan462-Suldalsposten_access_in_1 Vlan462-Suldalsposten interface

Access-group Vlan462-Suldalsposten_access_out_1 Vlan462-Suldalsposten interface

Route outside 0.0.0.0 0.0.0.0 79.x.x.225 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout, uauth 0:05:00 absolute

x x encrypted privilege 15 password username

the ssh LOCAL console AAA authentication

Enable http server

http 192.168.210.0 255.255.255.0 Vlan450

http 192.168.200.0 255.255.255.0 Vlan1

http 192.168.1.0 255.255.255.0 vlan400

No snmp server location

No snmp Server contact

SNMP-Server Community public

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

card crypto outside_map 20 match address outside_20_cryptomap_1

card crypto outside_map 20 set pfs

peer set card crypto outside_map 20 62.92.159.137

outside_map crypto 20 card value transform-set ESP-3DES-SHA

outside_map interface card crypto outside

crypto ISAKMP allow outside

ISAKMP crypto enable vlan400

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

tunnel-group 62.92.159.137 type ipsec-l2l

IPSec-attributes tunnel-group 62.92.159.137

pre-shared-key *.

Telnet 192.168.200.0 255.255.255.0 Vlan1

Telnet 192.168.1.0 255.255.255.0 vlan400

Telnet timeout 5

SSH 171.68.225.216 255.255.255.255 outside

SSH timeout 5

Console timeout 0

dhcpd update dns both

!

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan1

!

dhcpd option 6 ip 81.167.36.3 81.167.36.11 outside interface

!

dhcpd address 192.168.1.100 - 192.168.1.225 vlan400

dhcpd option ip 6 DomeneServer 81.167.36.11 interface vlan400

dhcpd option 3 ip 192.168.1.1 interface vlan400

vlan400 enable dhcpd

!

dhcpd address 192.168.210.100 - 192.168.210.200 Vlan450

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan450

dhcpd ip interface 192.168.210.1 option 3 Vlan450

enable Vlan450 dhcpd

!

dhcpd address 192.168.2.100 - 192.168.2.150 Vlan460-SuldalHotell

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan460-SuldalHotell

dhcpd 192.168.2.1 ip interface option 3 Vlan460-SuldalHotell

dhcpd enable Vlan460-SuldalHotell

!

dhcpd address 192.168.3.100 - 192.168.3.200 Vlan461-SuldalHotellGjest

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan461-SuldalHotellGjest

dhcpd ip interface 192.168.3.1 option 3 Vlan461-SuldalHotellGjest

dhcpd enable Vlan461-SuldalHotellGjest

!

dhcpd address 192.168.202.100 - 192.168.202.199 vlan470-Kyrkjekontoret

interface of dhcpd option 3 ip 192.168.202.1 vlan470-Kyrkjekontoret

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface vlan470-Kyrkjekontoret

dhcpd enable vlan470-Kyrkjekontoret

!

dhcpd option 3 192.168.20.1 ip interface vlan480-Telefoni

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface vlan480-Telefoni

!

dhcpd address 192.168.10.80 - 192.168.10.90 Vlan490-QNapBackup

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan490-QNapBackup

dhcpd 192.168.10.1 ip interface option 3 Vlan490-QNapBackup

!

dhcpd address 192.168.30.100 - 192.168.30.199 Vlan500-HellandBadlands

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan500-HellandBadlands

dhcpd ip interface 192.168.30.1 option 3 Vlan500-HellandBadlands

dhcpd enable Vlan500-HellandBadlands

!

dhcpd address 192.168.40.100 - 192.168.40.150 Vlan510-IsTak

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan510-IsTak

dhcpd 3 ip Vlan510-IsTak 192.168.40.1 option interface

Vlan510-IsTak enable dhcpd

!

dhcpd address 192.168.50.150 - 192.168.50.199 Vlan600-SafeQ

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan600-SafeQ

Vlan600-SafeQ enable dhcpd

!

dhcpd address 192.168.4.100 - 192.168.4.150 Vlan462-Suldalsposten

interface option 6 ip DomeneServer 81.167.36.11 Vlan462-Suldalsposten dhcpd

interface ip dhcpd option 3 Vlan462-Suldalsposten 192.168.4.1

Vlan462-Suldalsposten enable dhcpd

!

!

!

!

type of policy-card inspect dns preset_dns_map

parameters

message-length maximum 512

!

context of prompt hostname

Cryptochecksum:x

: end

Site 1 config:

: Saved

:

ASA Version 7.2 (4)

!

ciscoasa hostname

domain default.domain.invalid

activate the password encrypted x

passwd encrypted x

names of

!

interface Vlan1

nameif inside

security-level 100

IP 192.168.77.1 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

PPPoE Telenor customer vpdn group

IP address pppoe setroute

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

switchport access vlan 15

!

interface Ethernet0/6

!

interface Ethernet0/7

!

passive FTP mode

DNS server-group DefaultDNS

domain default.domain.invalid

outside_access_in list extended access permit icmp any any disable log echo-reply

access extensive list ip 192.168.77.0 outside_1_cryptomap allow 255.255.255.0 192.168.1.0 255.255.255.0

access extensive list ip 192.168.77.0 inside_nat0_outbound allow 255.255.255.0 192.168.1.0 255.255.255.0

pager lines 24

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm - 524.bin

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0-list of access inside_nat0_outbound

NAT (inside) 1 0.0.0.0 0.0.0.0

Access-group outside_access_in in interface outside

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

Enable http server

http 192.168.77.0 255.255.255.0 inside

http 192.168.1.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

card crypto outside_map 1 match address outside_1_cryptomap

card crypto outside_map 1 set pfs

peer set card crypto outside_map 1 79.160.252.226

card crypto outside_map 1 set of transformation-ESP-3DES-SHA

outside_map interface card crypto outside

crypto ISAKMP allow inside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Telnet 192.168.77.0 255.255.255.0 inside

Telnet timeout 5

SSH timeout 5

Console timeout 0

VPDN group Telenor request dialout pppoe

VPDN group Telenor localname x

VPDN group Telenor ppp authentication chap

VPDN x x local store password username

dhcpd outside auto_config

!

dhcpd address 192.168.77.100 - 192.168.77.130 inside

dhcpd dns 192.168.77.1 on the inside interface

dhcpd option 6 ip 130.67.15.198 193.213.112.4 interface inside

dhcpd allow inside

!

dhcpd option 6 ip 130.67.15.198 193.213.112.4 outside interface

!

tunnel-group 79.160.252.226 type ipsec-l2l

IPSec-attributes tunnel-group 79.160.252.226

pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

!

global service-policy global_policy

context of prompt hostname

Cryptochecksum:x

: end

Hello

The addition of a new network to the existing VPN L2L should be a fairly simple process.

Essentially, you need to add the network of the Crypto present ACL configurations "crypto map" . You also need to configure the NAT0 configuration for it in the appropriate interfaces of the SAA. These configurations are all made on both ends of the VPN L2L connection.

Looking at your configurations above it would appear that you need to the following configurations

SITE 1
- We add the new network at the same time the crypto ACL and ACL NAT0
access extensive list ip 192.168.77.0 outside_1_cryptomap allow 255.255.255.0 192.168.20.0 255.255.255.0

access extensive list ip 192.168.77.0 inside_nat0_outbound allow 255.255.255.0 192.168.20.0 255.255.255.0

SITE 2
- We add new ACL crypto network
- We create a new NAT0 configuration for interface Vlan480 because there is no previous NAT0 configuration
outside_20_cryptomap_1 to access extended list ip 192.168.20.0 allow 255.255.255.0 192.168.77.0 255.255.255.0

Comment by VLAN480-NAT0 NAT0 for VPN access-list

access-list VLAN480-NAT0 ip 192.168.20.0 allow 255.255.255.0 192.168.77.0 255.255.255.0

NAT 0 access-list VLAN480-NAT0 (vlan480-Telefoni)

These configurations should pretty much do the trick.

Let me know if it worked

-Jouni

Support for multiple sms sending?

Hello

can someone tell me where is the LAG of code to send multiple text messages.

I am only able to send a single sms.

private static boolean isCDMA()
    {
        return (RadioInfo.getActiveWAFs() & RadioInfo.WAF_CDMA) == RadioInfo.WAF_CDMA;
    }
    private static final class SmsMessage
    {
        private String _address;
        private String _port;
        private String _msg;
        public SmsMessage(String address, String msg, String port)
        {
            _address = address;
            _port = port;
            _msg = msg;
        }
        public Message toMessage(MessageConnection mc)
        {
            // If the user chose to have messages routed to the inbox (port = 0),
            // we need to specify an address without a port number.
            String addressString = "//" + _address + ( _port.equals(NON_ZERO_PORT_NUMBER) ?  ":" + _port : "" );

            TextMessage m = (TextMessage) mc.newMessage(MessageConnection.TEXT_MESSAGE , addressString);
            m.setPayloadText(_msg);

            return m;
        }
        public Datagram toDatagram(DatagramConnectionBase datagramConnectionBase) throws IOException
        {
            DatagramBase datagram = null;
            byte[] data = _msg.getBytes("ISO-8859-1");
            datagram = (DatagramBase) datagramConnectionBase.newDatagram();
            SmsAddress smsAddress = new SmsAddress("//" + _address);
            SMSPacketHeader smsPacketHeader = smsAddress.getHeader();
            smsPacketHeader.setMessageCoding(SMSPacketHeader.MESSAGE_CODING_ISO8859_1);
            datagram.setAddressBase(smsAddress);
            datagram.write(data, 0, data.length);         

            return datagram;
        }
    }
    public void sendSMS(final String address,final String msg,final String port)
    {
        Thread thread=new Thread()
        {
                public void run()
                {
                    SmsMessage message = new SmsMessage(address, msg, port);
                        try
                        {
                            if(isCDMA())
                            {
                                DatagramConnectionBase dcb = (DatagramConnectionBase)_conn;
                                dcb.send(message.toDatagram(dcb));
                            }
                            else
                            {
                                try
                                {
                                    mc = (MessageConnection)Connector.open("sms://"+address);
                                    if(mc!=null)
                                    {
                                        mc.send(message.toMessage(mc));
                                    }
                                }
                                catch (Exception e) {
                                    // TODO: handle exception
                                }
                                finally
                                {
                                    if(mc!=null)
                                    {
                                        mc.close();
                                    }
                                }

                            }
                        }
                        catch (IOException ioe)
                        {
                            updateStatus(ioe.toString());
                        }
                        }
        };
        synchronized (thread) {
            thread.start();
            try
            {
                Thread.sleep(2000);
            }
            catch (Exception e) {
                // TODO: handle exception
            }
        }
    }

And I'm the appellant at the bottom of the code.

for(int i=0;i
thankx.
			 My problem has been resolved.
I just put the send method in loop for.
Thankx

Support for multiple Active Directory ACS 5.2

Hello

I couldn't find a way to add multiple domain controllers to Cisco ACS 5.2, all that he requires in the GUI of the ACS entered the domain name? We are limited to add the root DC /forest?

I'm not a Microsoft Expert...

I could not understand how ACS detects the DC through this simple entry? What is with the help of DNS?

Comments are appreciated.

Dumlu

ACS 5 may be joined with a single domain right now. When GBA is joined to a domain, ACS can authenticate any user who belongs to this domain any domain controller in this domain. It relies on DNS resolution to find the appropriate domain controller.

I think that what you are looking for is Multi domain authentication. If you do this, then you should have a two-way trust between the immediate area (the area which is a part of the ACS) ACS other areas. The ACS will send authentication to one of the domain controllers in its domain and it will then be forwarded to the other domain. It could be a child or a parallel domain, but it must have 2 path of trust between them.

In other words, so that you may choose is to set up 2 separate domain controllers from different domains such as LDAP servers. In this case we do not need a way 2 trust and you can separately for each domain authentication request.

Support for multiple instances of vSphere vCenter
I installed the demo of (construction 4.4.0 - EE #1509 - July 28, 2010 - Release Build) Hyperic 4.4 company Web site to test the support of monitoring VMware vSphere 4.0.

I have installed an agent Win32 on W2003 server which hosts the 4.0U2 of vSphere vCenter server and configured it. Once resources have been configured, I edited the VMware vCenter resource to add a user/password valid and after a short while the ESXi host servers and virtual machines appeared in the vSphere browse/HQ screen. Everything works well.

I then tried to add a different vCenter server with its own ESXi host servers (with a new agent installed on W2003 this server) and that's where the problem starts. After that I added the name of user and password in the detail of the vCenter inventory, new ESXi and VM guests begin to appear under "recently added". When I go to the screen of vSphere browse/HQ original vCenter disappeared and a mixture of the other vCenter servers host and its own host servers appear under the vCenter newly added.

I would be able to monitor the 2 different vCenter servers?
Multiple vcenter instances are supported. When you configure the resource, be sure to use the IP address of the box instead of the default loop address. When HQ sees multiple vcenters air-conditioned and come with 127.0.0.1 in the URL of SDK, it blends. Configuring IP should solve the problem you are experiencing.

Support for multiple video cards under ESX

Hi all
I was wondering how ESX would handle several video cards I try to virtualize our test network and need to have different virtual machines for separate monitors. I couldn't see any info on ESX and video drivers and I was wondering if, as the core ESX is a put to update the Linux kernel, it would just a matter of installing relevant video drivers to Linux according to a normal Linux installation.
Thank you
Martin.

The vmkernel making virtualization and is, in essence, the operating system of your ESX is code written by vmware - where the origin of a component of the version of ESX - the ocnfusion service which is used to manage and control your ESX - the server console console service is essentially a virtual machine running a modified version of Linux RHEL 3 - now go back to your original question ESX does not supports several video cards , or you can access the Virtual Machines directly from the ESX Server. You must use a workstation running the VI Client - the VI Client is how you access your virtual machine providing access to the running virtual machine. You can access several simultaneousky of virtual machines running from a single workstation.

If you find this or any other answer useful please consider awarding points marking the answer correct or useful

Add support for multiple base in comments

I have an existing windows 7 x 64 reviews of company I want to add more CPU cores to. I followed the document of http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1010184 and the amount of carrots to 2. Right now I have a single vcpu, so I expect to see the two graphs in the Task Manager, but I did not. I have only one. In addition, Device Manager displays only one processor, and when I run wmic > cpu, I confirm that NumberOfCores is 1.
I have triple checked to make sure that I spelled cpuid.coresPerSocket is correctly spelled and everything. No idea why is seems these additional cores will not activate in the guest OS?
ESX 4.1.0 502767
Windows 7 SP1 Enterprise x 64
(also tried on Windows XP Pro SP3)
Thank you!

The number of vCPUs that you configure is the total number of cores in the virtual machine.

Example: If you want to configure a virtual machine with two dual-core processors, set the number of vCPUs to 4 and CoresPerSocket to 2. CoresPerSocket devides only the vCPUs configured to present as multi-core vCPUs guests.

André

RV082 multiple subnet and DHCP

Hello

I want installation 2 lans in my RV082:

192.168.1.0

and

192.168.2.0

My question is what happends as DHCP?

I tested and it gives only IP via DHCP addresses in the 192.168.1.0 lan. What happens if I put a WRT54G2 DHCP service in the Lan 192.168.2.0 and connected to the RV082?

So, in this case the multiple subnet are useful?

Thank you very much

Oliver

In general: the RV082 is now part of Cisco Small Business, and you might want to ask your questions in the Cisco Business little community support for routers. You will find people from Cisco over there...

It is my understanding that the function of multiple routers RV LAN subnet extends the NAT tables. By default, the router of RV will be only NAT for source from inside the LAN IP subnet IP addresses. If your router is equipped with the 192.168.1.1/255.255.255.0 by default then it will be only to do NAT for 192.168.1. * IP address, but not others. If you connect a different LAN (for example, 192.168.2.0/255.255.255.0) subnet across another router (the one without NAT) to your RV then the different LAN subnet would no internet because the RV does not know the LAN subnet and it doesn't NAT. basically the RV would send source IP addresses * 192.168.2 unchanged in the internet where they would quickly disappear. The function of multiple subnet allows you to say the RV that 192.168.2.0/255.255.255.0 is actually a subnet of your local network, routed and is supposed to happen by NAT.

Is it possible to set up for multiple users on the same computer to avoid entering the e-mail and the password

Original title: Multi users

Is it possible to set up for multiple users on the same computer to avoid entering the email and password every time that a new user want to check emails?

Hello

Welcome to the community forums of Microsoft and thanks for posting the question. According to the description, you need help in the creation of multiple user accounts. I've surely you will help find a solution on the issue.

What is the operating system installed on the computer?

User accounts, several people can easily share a single computer. Each person can have a separate user account with unique settings and preferences, such as a screen saver or desktop background. User accounts control files and programs users can access and what types of changes users can make to the computer. As a general rule, you'll want to create standard accounts for most computer users.

If you use Windows Vista or Windows 7, see the article below:

Create a user account

http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

http://Windows.Microsoft.com/en-in/Windows-Vista/create-a-user-account

For Windows XP users:

How to create and configure user accounts in Windows XP

http://support.Microsoft.com/kb/279783?WA=wsignin1.0

Hope this information helps. Answer please if you have more queries about Windows.

I need VPN gateway to gateway with NAT for several subnets, RV082

I have a pair of RV082 routers and I would like to configure a gateway to gateway VPN tunnel, as described in a book, "How to configure a VPN tunnel that routes all traffic to the remote gateway," (name of file Small_business_router_tunnel_Branch_to_Main.doc). I followed this recipe book and found that my while the main office has internet connectivity, the branch subnet is not an internet connection.

Routing behaves as advertised, where all traffic goes to the seat. However, the 192.168.1.0 subnet in the branch receives no internet connectivity. I read in other posts that the main router will provide only NAT for the local subnet, not the Management Office subnet. Is it possible to configure the RV082 router to provide NAT for all subnets?

If this is not the case, what product Cisco will provide connectivity VPN Tunnel as well as the NAT for all subnets? The RV082 can be used as part of the final solution or are my RV082s a wasted expense?

Here is the configuration that I had put in place, (real IP and IKE keys are false).

Bridge to bridge

Remote Head Office

Add a new Tunnel

No de tunnel 1 2

Name of the tunnel:, n1 n1-2122012_n2-1282012-2122012_n2-1282012

Interface: WAN1 WAN1

Enable : yes yes

--------------------------------------------------------------------------------

Configuration of local groups

Type of local security gateway: IP only IP only

IP address: 10.10.10.123 10.10.10.50

Local security group type: subnet subnet

IP address: 192.168.1.0 0.0.0.0

Subnet mask: 255.255.255.0 0.0.0.0

--------------------------------------------------------------------------------

Configuration of the remote control groups

Remote security gateway type: IP only IP only

IP address: 65.182.226.50 67.22.242.123

Security remote control unit Type: subnet subnet

IP address: 0.0.0.0 192.168.1.0

Subnet mask: 0.0.0.0 255.255.255.0

--------------------------------------------------------------------------------

IPSec configuration

Input mode: IKE with preshared key IKE with preshared key

Group of the phase 1 of DH: Group 5 - 1536 bit group 5 - 1536 bit

Encryption of the phase 1: of THE

The phase 1 authentication: MD5 MD5

Step 1 time in HIS life: 2800 2800 seconds

Perfect Forward Secrecy: Yes Yes

Group of the phase 2 DH: Group 5 - 1536 bit group 5 - 1536 bit

Encryption of the phase 2: of THE

Phase 2 of authentication: MD5 MD5

Time of the phase 2 of HIS life: 3600 seconds 3600 seconds

Preshared key: MyKey MYKey

Minimum complexity of pre-shared key: Enable Yes Enable

--------------------------------------------------------------------------------

If you are running 4.x firmware on your RV082, you must add an additional Allow access rule for the Branch Office subnet (considered one of the multiple subnets in the main office) may have access to the internet. Note the firmware version has more details about it.

http://www.Cisco.com/en/us/docs/routers/CSBR/rv0xx/release/rv0xx_rn_v4-1-1-01.PDF

Is there a way to pay for multiple images to in the same transaction rather than one by one?

Is there a way to pay for multiple images to in the same transaction rather than one by one?

Right now only at a time is supported.

OEDQ support for the AV tools

Hello
Please someone let me know tools of support for OEDQ AV except Loqate and QAS.
Thanks in advance.
Concerning
Deborah

External web services call is usually to the Disqualification by using a Script Processor (to where the script used depends on the web service interface). Note that the Script processor is limited to a single output, so normally, if multiple attributes are returned, they are returned in a table attribute, then split later. If you need to do something more advanced than this, you will need to write a new processor in Disqualification - we can tell you this if necessary.

It is easier to illustrate the approach of Script for example.

Here is an example of a legend to a code search service postal sample of GeoNames.org. It is a Script processor that takes three inputs (zip code and the country of the attributes of string and a number of maxresults attribute). It returns the results in a table.

addLibrary ("http");

Function GetValue (content, name) {}

var value = "";

startPos = content.indexOf ("<" +="" name="" +="" "="">") var;

If (startPos >-1) {}

endPos var = content.indexOf ("", startPos);

value = content.substring (startPos + name.length + 2, endPos);

}

Returns the value;

}

function GetCDATAValue (content, name) {}

var value = GetValue (content, name);

If (value.indexOf ("))
return value.substr (9, value.length - 12);

on the other

Returns the value;

}

try {}

var result = new Array();

var url = "http://api.geonames.org/postalCodeSearch?postalcode=" + input1 [0] + '& country =' + input1 [1] + '& LignesMax =' + input1 [2] + "& username = demo;

var xmlHttp = new XMLHttpRequest();

XMLHTTP.open("get",URL,true) ("GET", url, false);

xmlHttp.send ();

var response = "' + xmlHttp.responseXML;

startPos = response.indexOf var (" ");
while (startPos > -1) {
var endPos = response.indexOf(" ", startPos);

var record = response.substring (startPos, endPos);

var postalcode = GetValue (record, 'postal code');

var name = GetValue (record, "name");

var countryCode = GetValue (record, 'postal code');

var lat = GetValue (record, "lat");

var lng = GetValue (file, "lng");

var adminCode1 = GetValue (record, "adminCode1");

var adminName1 = GetValue (record, "adminName1");

var adminCode2 = GetValue (record, "adminCode2");

var adminName2 = GetValue (record, "adminName2");

var adminCode3 = GetValue (record, "adminCode3");

var adminName3 = GetValue (record, "adminName3");

result [result. Length] = zip + "|" +.

name + "" + |

Country code + "|" +.

LAT + ' | ' +.

LNG + "|" +.

adminCode1 + "|" +.

adminName1 + "|" +.

adminCode2 + "|" +.

adminName2 + "|" +.

adminCode3 + "|" +.

adminName3;

startPos = response.indexOf var (')", endPos);
}
} catch (e) { result[result.length] = "Error: " + e.toString(); } output1 = result;

LRT224 Support for multiple subnets

Similar Questions

Maybe you are looking for