& lt; CFIF & gt; and topping Help Needed

Similar Questions

• Discoloration Flash movies and sound-HELP NEEDED

  Hey guys I need help
  
  first of all if you want to help me could u please visit this site
  
  http://www.thetimemovie.com/
  
  This site is what I want to do
  
  Note pictures of discoloration which can be controlled and the sound bar at the bottom left
  
  
  Any help would be GREATLY frequented b
  
  
  Thanks in advance
  
  BUTCH101
  
  PS: email [email protected] if you have any info thanks

  What I see in the test site is that the "sound bars" are not sync was at all. They are just a looped clip which stops in diagonal form when you click it. And the sound is not really be stopped, when you click on the bars. Rather, the ActionScript is actually turn the volume down, little by little. The sound plays always continuously, you just can't hear it. This is evident in the fact that when you restart the sound, he not pick up where you left it, but at the point where it would have been anyway, had you not clicked the button.

  I think that the sound is set to streaming and can thus be processed image by image. So, your quest is to have someone (more knowledgeable than me) provide examples of code that would begin to reduce the volume of the sound increments object as the film passes through the images. Something like:

  {onFrame (95)
  mySound.setVolume (80);
  }
  {onFrame (110)
  mySound.setVolume (60);
  }
  {onFrame (120)
  mySound.setVolume (40);
  }
  {onFrame (130)
  mySound.setVolume (20);
  }
  {onFrame (140)
  mySound.setVolume (10);
  }
  {onFrame (150)
  mySound.setVolume (0);
  }

  Obviously, you would use numbers of images, but a variable that represents the current frame compared to the plot of the film was on when you clicked the button.

• RMAN control file backup and restore: help needed

  Hello guys,.

  I am new to RMAN and run RMAN for BACKUP scripts.

  Run {}

  CONFIGURE REDUNDANCY 1 RETENTION STRATEGY;

  SET UP THE DEVICE TYPE DISK PARALLELISM 2 TYPE OF BACKUP BACKUPSET.

  backup in compressed format additional effective backupset 0 database tag 'TEST_FULL_BACKUP' '$RMAN_BACKUP/datafiles_backup/bkp_${DD}/%d_%s_%p ';

  Backup to compressed backupset archivelog all not saved both 1 FORMAT "$RMAN_BACKUP/arch_backup/bkp_${DD}/ARCH_%d_%s_%p".

  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK to '$RMAN_BACKUP/controlfile_backup/bkp_${DD}/%F ';

  delete noprompt obsolete;

  delete noprompt archivelog all completed before ' sysdate-2';

  }

  I can see the data file and archieve files backup

  $RMAN_BACKUP/datafiles_backup/bkp_${DD}/%d_%s_%p';

  '$RMAN_BACKUP/arch_backup/bkp_${DD}/ARCH_%d_%s_%p ';

  But control missing in "$RMAN_BACKUP/controlfile_backup/bkp_${DD}/%F";

  What is the problem with my order... Help, please

  S

  RMAN > list backup of controlfile;

• When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help

  When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help

  The solution is here:

  http://support.Microsoft.com/kb/321305?WA=wsignin1.0

• Product key is expired, and now I need the product ID for the service to help install... help?

  Product key is expired, and now I need the product ID for the service to help install... help?

  Hi RUSSELLDUNN270,

  Which product key you are talking about? Is it for any application or Windows XP?

  If you are referring to the product key of Windows XP, you can use the product key update tool Windows that will make changes to your Windows installation to update your product key.

  For more information, please visit this link: update your Windows product key

  Hope the helps of information.

  Please provide us with more information about the issue so that we can help you further.

• I accidentally deleted my command prompt, and I really need this back. Any help?

  I accidentally deleted my command prompt, and I really need this back. Is it possible anywhere I can download it? Help, please.

  You have cmd.exe here C:\Windows\System32?  If it isn't you can copy it from another similar device or run the System File Checker if the system restore does not work.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• Hey guys, ive tryied buy photoshop like a hundret times, ive typed in my information payment and everything I need, went on the button pay on the accept button but nothing happened, I need help pls passing sry for my language

  Hey guys, ive tryied buy photoshop like a hundret times, ive typed in my information payment and everything I need, went on the button pay on the accept button but nothing happened, I need help pls passing sry for my language

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• I can not install Lightroom 6 on my laptop using 8.1 to WIN.  The installer asks me to connect and when I do after 20 sec freezes the computer and the battery needs to restart.  This prevents the work online help.  What can I do?

  I can not install Lightroom 6 on my laptop using 8.1 to WIN.  The installer asks me to connect and when I do after 20 sec freezes the computer and the battery needs to restart.  This prevents the work online help.  What can I do?

  Settle in the right forum.

• I can't get to Yosemite... and I REALLY need. Help!

  Hello

  So I have a Mac Pro running 10.8.5 and I really need to update to Yosemite. Because I use a lot of hardware and software Audio Pro, I can never run because of instability the last OS X / incompatibility issues. My version of Pro Tools HD still does not support El Capitan at all, so even if the next operating system is about to be released, I can't yet day to the current version.

  I have Yosemite in my list of "Bought" from the App Store, because if I updated it before, it would have made my system useless. I also have a MacBook Pro that has been bundled with Yosemite, but may not work on a way to be able to install this OS on the desktop computer. I even created an external drive using the recovery mode, then together drive as boot on the office recovery mode drive, entered trying to install anywhere on the desktop, but after that I have put in my Apple ID at the beginning of the install said 'article temporarily unavailable' or something to that effect.

  It took me 15 hours just to make this recovery disk because my internet is so slow here, and I even nowhere more closely for Yosemite on my Mac Pro. So I'm pulling my hair out here... hoping someone has an answer as to how I can get Yosemite on my machine?

  Would appreciate ideas, people have!

  Thank you

  You can try asking at an Apple Retail Store or an Apple authorized repair store.

• Get help to use local help and support Help Center for XP sp3

  Help and support center does not open, msg says help and support service does not work, but check indicates it is enabled, but error msg says 1083, the program does not work?

  To get ideas that are not a wild-goose chase or a waste of your time, you should try to post the exact error messages you see and not paraphrase them.

  For example, you see a message like this?

  Windows cannot open help and Support because a system service is not ongoing enforcement.
  To resolve this problem, start the service named 'help and Support '.

  As long as the Service is not disabled (it can be manual or automatic), if it is not executed, it should start automatically as you open the help and Support Center.   It doesn't have to be set to automatic to work.

  You have checked and your help and support is not disabled, no?  If it is disabled, you will surely get that message, so it must be either manual or automatic.

  Where and how you see this message 1083 and what the program that does not work?  I don't understand that part at all if you need clarify the part.

  In addition, since the MS Answers forum still does not prompt for any information system when a new question is asked, you would be better served by answering a few questions:

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the help and support used to work, what do you think might have changed since the last time it worked correctly?

  You have now or have you ever used third-party applications on your system where the product description includes descriptive as sentences:

  cleaner, mechanic, detective, doctor, heal, optimize, clean up, tune up, speed up, set towards the top, compact, compress, faster, power, boost, boost, gum, muncher. one click fix, new, intuitive, errors, stop crashes, stop errors, improves, saves you money, risk free, guaranteed or any third-party program that has an icon that looks like a gear, pinion, key, key, whirling arrow or screwdriver?

• Satellite A30 213: Internet Wi - Fi, USB and Touchpad drivers needed please

  Hello

  Recently, I restarted my pc, but have not used the application supplied with the pc CD. Now my internet connection is not installed, then the light does not illuminate, and my Touchpad is not scrolling features. My USB 2.0 speed is also slow.

  If someone could possibly help me get these drivers it would be greatly appreciated. Also if the pilots were not a simple install (setup) icon could you please let me know what I need to know to install.
  Thank you all in advance and any help would be great.

  Hello Loyan

  Sorry, but your ad is not understandable to me. Do you mean that you have installed the own operating system?

  If so, please install the necessary drivers. Each of them you can find on Toshiba supports the page. If it please the first chipset driver installation and continue with display, audio, driver and so on.

• I have a Hp Pavilion Media Center Edition 2002 running. How will I know if I have all the patches and updates, I need? Also is free upgrade to the edition of 2005?

  I have a Hp Pavilion Media Center Edition 2002 running. How will I know if I have all the patches and updates, I need? Also is free upgrade to the edition of 2005?

  Hi Philofduluth and thanks for posting.

  There is not a free upgrade for Media Center 2005. If this is something you would like to do, I contact your OEM manufacturer and ask if there is a software upgrade, they can provide you.

  If you have all the updates that are available for your system go to http://update.microsoft.com . Here, you can see all the latest reviews and optional updates that may be available to you and make install.

  I hope this helps. Let us know if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I use Windows Vista and that you need to download SQL Server 2005 Express Service Pack 4. I get an error code of 64 C. Please tell me what to do?

  I use Windows Vista and that you need to download SQL Server 2005 Express Service Pack 4. I get an error code 64 C help, please.

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to reset components to update Windows from the following link, which would help you to install the updates of windows. http://support.Microsoft.com/kb/971058

  Method 2: If the problem persists, then try to set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Also try to install the updates manually from the link below.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=184

  You can also consult the following link for more information:

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

• What is a debug dump file, and do I need?

  When I go to disk cleanup, debugging dump files is one of the options, are files created by windows, will be permanently deleted and do I need?

  Hello

  Those are to help if you are experiencing operating system problems. If there is no
  real problems under Windows and then delete as they will not help in the future
  News and events will be created if a major problem comes up.

  I hope this helps.

• Please can someone help, need password CNU9497P2C

  I have the same problem and its driving me crazy... I need the BIOS password because I can't access to this

  [number of Series edited by Moderator]

  Please can someone help, need password

  HP MINI CQ10

  Sweb try.

  e9lovox27e

  3rd letter tiny L.

  4th and 6th letter lowercase o.

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.