LV 8.2 reentrant vi share data via the global style LV2.

Similar Questions

• How to share data in the swc files?

  I can save the shared data (such as dsn) in application.cfm so all cfm files can read.
  
  But how to share data in swc files as application.cfm. I heard application.cfc, may I use share data in the swc files?
  
  Don't you think that if it is correct that application.cfm and application.cfc exist in the site?
  
  Thank you
  
  Mark

  IIRC, you can't use both. If you Application.cfm and Application.cfc in the same folder, CF will ignore Application.cfm.

• Transmission of data via the Ad Hoc network in LabVIEW

  Hello

  I'm trying to transmit some data (position, speed, etc.) a laptop computer to a host computer.

  The laptop and desktop have the card installed wireless so I thought this would be a good

  the idea of transmitting data via Wi - Fi using TCP.

  However, the problem is that there is no router/modem in the area where the laptop is sitting

  so, I create a network of Ad-hoc (computer to computer) between the laptop and the desktop computer.

  Then, I use "ipconfig/all" in the Windows command prompt to extract the IP as follows.

  IP address wireless laptop: 169.254.165.72

  IP address Wireless Desktop: 169.254.102.126

  Desktop Ethernet IP address: 129.94.229.230

  I then use the code example in the TCP library named 'Data Server.vi' and "Data Client.vi."

  I listen on port 6340 times the wireless and ethernet desktop on the side map server.

  And on the side of the customer, I opened a connection to port 6340 169.254.102.126 IP address.

  However, the connection cannot be granted. Anyone know why this is the case?

  Note: I have disabled all firewalls.

  Interesting, when 2 computers are connected to the same modem, their IP addresses

  differ only by the last number (e.g. XXX.XXX. XXX.123 vs XXX.XXX. XXX.256), but when an ad

  the House of Commons network is established, their IP addresses have 2 numbers that are different. (XXX.XXX.

  102,126 vs XXX. XXX.165.72) I wonder if this has nothing to do with the failure.

  Thanks for all your help.

  Ron Liou

  I somehow this job.

  What I've done

  -Once again set up an Ad hoc network for the labtop and Office

  -verification of the IP address is always the same

  > Portable wireless IP address: 169.254.165.72

  > Portable wireless subnet mask: 255.255.0.0

  > Wireless Office IP address: 169.254.102.126

  > Wireless Office subnet mask: 255.255.0.0

  -switch on the ICS of the ethernet on the desktop card

  (This resulted in an IP different addresses assigned beng)

  > Portable wireless IP address: 192.168.137.21

  > Portable wireless Subnet Mask: 255.255.255.0

  > Wireless Office IP address: 192.168.137.1

  > Office Wireless Subnet Mask: 255.255.255.0

  Now I use the ip address of office (192.168.137.1) to open the connection

  and it works! ??

  I am very pleased with the fact that it works but I would like to have one

  explanation on why it takes an ICS.

  Thank you!

• How to share data in the applications between different accounts of microsoft on the same PC

  Hi, I had been using windows 8 for over a month and that you have installed a * a lot of apps on the store. Now, I have to create a separate account from microsoft on the same PC. After having created, I find no way to use apps from windows of the older account store. And, certainly, I don't want to re-download applications for use on the new account. Is there a way to share data between different accounts on the same PC selected app? Thanks in advance, Praveen.

  Hi Samuel,.

  This is a free support. However, let me provide you with assistance on the issue of not being able to use the MS Office product on different user accounts. See the articles that describe how an application installed as MS Office can be used on another user account:

  Find and start Office applications in Windows 8 or Windows RT

  Also, for your further reference:

  Application does not appear on the start screen after the passage to another user

  I hope this helps. If you need additional help, then just reply back. Also, if you are faced with other problems related to Windows, it would be better to start a new thread of your own instead of posting in the thread on the other so that the new thread is no longer visible to the community.

• Get to Eloqua 9 data via the API?

  Can anyone shed light on what is available via the Eloqua9 API to get the Eloqua data and also have a system (such as SQL2012) external data in Eloqua push? We are trying to implement the data cleanup efforts in our new tool of Data Quality Services and we would like to integrate with Eloqua. Can you give us some insight and detail on what we can and cannot do?

  Dennis,

  It depends on your business case here and the volume of data.

  Eloqua offers various options of the Soap API & REST.

  Also low volume & bulk options as well.

  For E9, you can start going through the documentation of the Soap API at the following link: -.

  https://www.eloquatrainingcenter.com/Portal/documentation/API/default.htm

  For authentication and exploitation of low volume of use of the WSDL for the Service: https://secure.eloqua.com/API/1.2/Service.svc?wsdl

  More data volume use the WSDL Service of data: https://secure.eloqua.com/API/1.2/DataTransferService.svc?wsdl

  An air of challenge, you can accomplish connecting SQL2012 to Eloqua defining HTTP endpoints and using components of script for mappings of field and transfer data using SSIS.

  For a more robust solution I would develop a .net stand alone application, and you can call it of SSIS in order automation and business intelligence.

  Good luck

  Daniel Nader Shaheen

• Is vMotion road data via the server vCenter Server?

  Hello

  I need help to solve a query I have.

  We currently have a vCenter server that manages certain clusters, but also some stand-alone hosts with local storage (not shared). Stand-alone hosts are physically located on remote sites. Some sites have more than one of these stand-alone hosts. We have an obligation to move a VM to a standalone host guest to another independent host on the same remote site.

  As there is no shared storage the VM should be stopped before trying the vMotion.

  The virtual machine in question has a 4 TB thick VMDK accrued that is migrated between the physical host computers.

  I think when the vMotion is launched the data will be limited to the subnet that the two physical hosts are connected and therefore use the bandwidth available via local network equipment and will not let the physical site. My colleague suggested, however, that data travels through the vCenter server. Of course, this would cause a problem to try to move the data so much and would effectively mean that this 4TB would leave travel via the vCenter server, remote site, then return to the remote site. Not only this would be very slow, it could also have a negative impact on bandwidth to and from the site.

  So my question is who is correct? (Assuming that one of us is!)

  Thank you

  When you start migrating cold from a virtual computer by selecting migrate both (host and storage) where your hosts are based in the same place, it will happen with esxi source and target host, it will not go all the way to your host to vCenter.

  If your environment is vSphere client of web use 5.1 or higher, and you can move VM while it is powered on and residing in the local storage of the host. This feature is called Cross-host migration. available only by using the web client.

• How to share data in the tables ' User_ * ' with another schema

  I want to share the data in the table WHERE USER_SEGMENTS with another schema. If I create a view and grant select on the view, when the other schema queries the view data are identical to themselves querying the SYS.user_segments table directly.
  

  create view sys_user_segments as select * from sys.user_segments;
  grant select on sys_user_segments to A;

  My guess is that the SYS.user_segments table is a view based on the current user.
  
  Is there a way to share such data without creating a copy of the table?
  
  Oracle: 10g
  
  Thank you

  If the ADMINISTRATOR is concerned about B access to DBA_SEGMENTS (or by creating DBA_SEGMENTS views that belongs to a user who has access on top and then grant access to this view of B), it seems pretty crazy allow that kind of database connection.

  If you create a database link belonged to B that connects to A, B is, in substance, given any privilege that has exercises. But it is done in a very, very dark which will no doubt be neglected in the future when someone gets a check. He'll be sitting here to wait that someone (accidentally or intentionally) Decides to exploit the security hole and do something that is causing a problem (by removing all data from a table, grabbing all the sensitive data in a table, etc.). Risks of this almost certainly far, far* far * outweigh the risks of even leaving B to obtain direct access to DBA_SEGMENTS.

  Justin

• Which is associated with the value of the HR2000 + spectral data via the pilot VISA

  Hey all,.

  I have the HR2000 + ARE here and I got successfully talk with labview and I can't change the integration time and extract data from the spectrum.  I know that I will have to take into account the lack of the CDC of efficiency regarding the higher wavelengths and lower wavelengths, however I do not think that I am still at this stage.  In my dark spectra, I get about values approximately 8700 through all pixels.  I have not the slightest idea about what exactly that is corresponding.  This is related to a saturation of each pixel value? I know I'm getting closer to this operational, but it seems to present an obstacle in my way.

  Thanks for any help or ideas that anyone can offer,

  -John

  Hi John,.

  Thanks for your post. So you're properly acquire your data of your instrument through VISA. I'm a little unsure where exactly you need assistance. Your question is about entering your data in LabVIEW, or is it to interpret the data you receive? The manufacturer of your device would be able to contribute to explain what values you receive correspond to the terms of the pixels (saturation value or otherwise). However, if you're wondering how to manipulate your data in LabVIEW or need help with specifications for VISA, etc. then that is something we can certainly help you with us!

  Best,

  Courtney L.

  Technical sales engineer

  National Instruments

• Ability to share data between the classes?

  I have a panel that uses a local SQL database to display information from a lookup table. Now I want to add a button to see more information on another panel of different SQL tables, but it is related to the information on the first Panel that will always be open. How can I pass the field key of a Panel to another so that it shows the correct data? I have each working independently, can't simply coordinated. I imported two classes on the two panels. When I try to 'join' the panels on the key field, I get no data in the second Panel. Thanks for your suggestions.

  "ibmaris" wrote in message
  News:gfag28$H39$1@forums. Macromedia.com...
  > I have a panel that uses a local SQL database to display information
  > of
  > a searchable table. Now, I want to add a button to display more
  > informaton
  > on another panel of another table SQL, but it is bound to the
  > information on the first panel which can still be opened. How can I pass
  > the key
  > the field from one Panel to the other so that it shows the correct data? I have
  > have
  > each work independently, not everything can get coordinated. I imported the two
  > classes on the two panels. When I try to 'join' the panels on the key field
  > I get
  > no data in the second Panel. Thanks for your suggestions.

  http://www.magnoliamultimedia.com/flex_examples/Amys_Flex_FAQ.PDF

  Q3

• How can I change the date to the Uk style format

  When I get my calendar reminders, it displays the date in the action column in the American style, which is confusing for example something today shows that the 11/05/2013 and not as 05/11/2013.

  If you can't find an extension based on the reminder, the next step would be the options for your calendar site. If it is a popular (e.g., Google calendar), you'll probably find advice on how to change the date format in a web search. If it is a more obscure, you could try their support if the option is not obvious.

• Can we use to share data from the phone to the Pc as bluetooth Wifi direct

  I have samsung galaxy tab2 7 and I want to share its data with my acer laptop (which is active wifi) via wifi direct... is it possible?

  With additional software on your Android device as a server or an FTP client (see https://play.google.com/store/search?q=ftp&c=apps), or Google Reader (https://play.google.com/store/apps/details?id=com.google.android.apps.docs), it is quite easy to move data between your PC and the server.  Finding a Bluetooth dongle for your PC (see http://www.amazon.com/s/ref=nb_sb_ss_i_5_9?url=search-alias%3Dcomputers&field-keywords=bluetooth+dongle&sprefix=bluetooth%2Ccomputers%2C571#/ref=sr_kk_1?rh=i%3Acomputers%2Ck%3Abluetooth+adapter&keywords=bluetooth+adapter&ie=UTF8&qid=1374094444) would be another way to go.  My desktop PC came with WiFi and Bluetooth in it.

  I find it easier, however, to connect my device Android on my PC with a USB cable and just drag and drop files between the PC and the device.

• Send and receive data via the Ethernet Port?

  Hello

  I am trying to acquire details of LAN/Ethernet from the PC through LabVIEW.Like details, we get the date & time, etc Serial Port system, is it possible to get the details of my PC via LabVIEW.My LAN aims to sebd and Receive via Ethernet Port command.

  The last time I did it, I used the range of tcp. (I go ctrl + space for quick menu then type tcp). Open a connection to the network device, and then use tcp read/write, depending on the case. There are examples that can be very useful

• How to periodically send various types of data via the Serial Port?

  Hello! Everyone

  I have to send data to LabVIEW to my device on the Serial Port.

  I know how to send data on serial port in LABVIEW, I already have this part.

  Now the problem is that I have several types of data I need to question my embedded device, if I want to send the query periodically command.

  So lets say that my four Op Codes are the following, which will send four different types of query command to my device on the serial port.

  (To be honest only OP_LED and OP_SENSOR is used now)

  0, OP_SYNC

  1, OP_LED

  2, OP_SENSOR

  3, OP_FUTURE

  Structure of basic package is as follows:

  Header (0x2C), Checksum, length of the data (n bytes), Op_Code (1 byte), length (length of Code + data Op)

  For OP_LED, I need to send the package as follows:

  0x2c 0x02 0x01 0 x 00 0x2F (0x2F being the XOR checksum) (calculation of Checksum part is done and SUB Vi form)

  Length of the package this is 0x02

  0x01 is Op Code for OP_LED

  In the same way

  For OP_SENSORi need to send the package as follows:

  0x2c 0x03 0x02 0x00 0 x 00 0x2D (0x2D being the XOR checksum) (calculation of Checksum part is done and SUB Vi form)

  0x03 is length of packet here

  0x02 is Op Code for OP_SENSOR

  So, how can I do this periodically in labview, in such sort that period can be adjusted whenever necessary.

  Is there something in LabVIEW to do.

  I had done the reception and decoding part and working properly.

  http://forums.NI.com/T5/LabVIEW/store-data-coming-from-serial-port-in-buffer-and-then-take/m-p/32722...

  So I must implement read and write the part of same while loop?

  Do not insert in the table if you put data in an array at index 0.  Just use array to build.

  No need to have Visa to write don't be a part of wire to the wire of reference and error VISA go in the upper part.  These wires should go THROUGH the entry VISA.

  Don't your checksum requires all the bytes up through data?  Righ now, you only put the checksum on data bytes and forget the opcode and length bytes.

  Your sending is not the opcode for Opsync or Opfuture.  You just send the empty tables.  At the same time for the other two, you put the opcode in the data table.  All your original opcode in the table build thread.  Get the data out of these structures in case item which is supposed to represent the opcode.

  xpress_embedo wrote:

  Now it works but I have now two problems.

  (1) OP_SYNC and OP_FUTURE do not data, but still receive its data on serial port, can I do something here as I have nothing when the table is empty in the structure of the case.

  I do not understand this statement.  Perhaps my answer above will fix any issue you have here.

  (2) how can selection operation Code to be send is done using control façade but real application, this task should be automated to a certain frequency, like OP_LED package must go out to the serial port to 100msec and packet OP_SENSOR must go out to 1000msec, I do this.

  Now you agree a little more architecture.  I would encapsulate the code that is in the while loop as a Subvi.  Then with the hand of your program while loop, use two time Express VI, a game for 100 msec, the other for 1000 msec.  When an express VI is true, run the Subvi with a command set waiting for the answer.  When the other VI Express is true, have it run the Subvi with the other set of commands.

  The device responds with anything when you send these commands?  You only send data.  I see no VISA Read to be able to recover all the data.

• Best-how-how to share data between the case of the event?

  ... more, which would be the best way to disable a case of event if another case of event has not run yet?

  I store the table a landslide enter a while loop that surrounds the structure of the event, then your data is readily available to any event.  However, you will need to wire data in and out of each case of the event table, which can be done easily with the connected tunnels.  If you need display the table of data as well, put an indicator inside the while loop while out of the structure of the event, connected with the registry to offset.

• Problem reading data via the Bluetooth Serial Port

  My request is meant to connect with a PC via Bluetooth.

  The PC runs a simple server that reads a string from the BlackBerry UTF and writes a UTF string in response.

  DataInputStream istream = connection.openDataInputStream();DataOutputStream ostream = connection.openDataOutputStream();
  
  System.out.print(istream.readUTF());
  
  ostream.writeUTF("Hello client");ostream.flush();
  
  ostream.close();istream.close();
  

  The sound written BlackBerry pin and reads the answer.

  DataInputStream istream = connection.openDataInputStream();        DataOutputStream ostream = connection.openDataOutputStream();ostream.writeUTF(Integer.toString(DeviceInfo.getDeviceId(), 16));ostream.flush();
  
  _rtf.insert(istream.readUTF());
  
  ostream.close();istream.close();
  

  The server reads and prints the PIN successfully, but the client raise EOFException at readUTF().

  What could be wrong?

  Solved. The server side must not empty its output stream.