Transmission of data via the Ad Hoc network in LabVIEW

Similar Questions

• 'Windows not will mark the Ad Hoc network'

  Hello

  User of the computer without experience here.  I have an iPad that works very well if I have WiFi available.  I don't have WiFi at work, so I am interested in the connection through my work Windows 7 computer, which is connected via a connection to the local network.

  I did everything according to the instructions on:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  However, when I put my key name and the network security and press 'Next', I get the message, "Windows could not configure [network name]."

  There is no other error message and no indication on what I could do so that Windows is able to put in place the ad hoc network.

  What should I do?

  Thank you

  Rob

  Hello Rob,

  Thank you for the update.

  As you said that the computer is connected to a domain network, I would like to advice post you your query in the TechNet forums because they have more expertise on these issues. Follow the link below to do the same.

  Forums TechNet for Windows 7
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

• Is vMotion road data via the server vCenter Server?

  Hello

  I need help to solve a query I have.

  We currently have a vCenter server that manages certain clusters, but also some stand-alone hosts with local storage (not shared). Stand-alone hosts are physically located on remote sites. Some sites have more than one of these stand-alone hosts. We have an obligation to move a VM to a standalone host guest to another independent host on the same remote site.

  As there is no shared storage the VM should be stopped before trying the vMotion.

  The virtual machine in question has a 4 TB thick VMDK accrued that is migrated between the physical host computers.

  I think when the vMotion is launched the data will be limited to the subnet that the two physical hosts are connected and therefore use the bandwidth available via local network equipment and will not let the physical site. My colleague suggested, however, that data travels through the vCenter server. Of course, this would cause a problem to try to move the data so much and would effectively mean that this 4TB would leave travel via the vCenter server, remote site, then return to the remote site. Not only this would be very slow, it could also have a negative impact on bandwidth to and from the site.

  So my question is who is correct? (Assuming that one of us is!)

  Thank you

  When you start migrating cold from a virtual computer by selecting migrate both (host and storage) where your hosts are based in the same place, it will happen with esxi source and target host, it will not go all the way to your host to vCenter.

  If your environment is vSphere client of web use 5.1 or higher, and you can move VM while it is powered on and residing in the local storage of the host. This feature is called Cross-host migration. available only by using the web client.

• Unable to connect to the ad hoc network created in windows vista

  Hello

  I created an ad hoc network on the laptop to my sister that is running windows Vista Home Basic Edition x 86.
  I installed ubuntu 11.04 alongside windows 7 on my laptop. I can find the network under ubuntu, but I can't connect to it.
  Can someone help me with this please?

  Hello

  Method 1:
  You can networks troubleshooting wireless with Ubuntu and check:
  https://help.Ubuntu.com/community/WifiDocs/WirelessTroubleShootingGuide

  Method 2:
  If you have problems with Windows networks and then check out the link
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I'm trying to set up an Ad Hoc network, but there is no option for the Ad Hoc network configuration when I go into the network and sharing Center.

  I looked at how to make a point of my computer because I have a usb wireless internet device for my laptop and I tried to get an ad hoc network setup but there is NO option for the CONFIGURATION of the NETWORK AD HOC when I go to network and sharing Center... what should I do?

  original title: ad hoc isn't here...

  Hi NickBean2,

  You can refer to the following articles and see if it helps.

  Set up a computer-to-computer (ad hoc) network
  Solve problems, find wireless networks

  Hope this information is useful.

• DeskJet 3070 unable to connect to the ad hoc network

  Hello

  I'll put up my new HP Deskjet 3070. This printer has wireless capability. I would use it wireless with my laptop Macbook Pro (OSX 10.6.8).

  I don't have a wifi network or router at home. That's why I created a wifi (one to one) on my mobile ad - hoc network, named MyPrinterNetwork. This is the type of network used to connect a computer to the other on wifi. MyPrinterNetwork is then visible to other devices compatible wifi (other computers, smartphone,...), and devices can connect to the network (and share files or Internet by wifi). This thread http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Connect-Deskjet-3070A-wirelessly-to-my... suggests that this printer is able to connect to ad hoc networks.

  I then launch the HP utility to configure the printer. But when the screen appears with the list of available wifi networks, MyPrinterNetwork is not in the list. The list contains only the other wifi available through networks points (values in wifi mode column are all infrastructure) access. If I try to enter the name of a network manually, the software indicates that the printer cannot see or connect to this network.

  Executive Summary:

  -Someone would confirm that the printer Deskjet 3070 is able to connect to the ad-hoc wifi networks?

  -If so, why my adhoc network isn't in the list in the configuration utility?

  Thanks and greetings

  Johnny

  Hello Johnny.

  Deskjet 3070 Network Infrastructure support only, it does not support the ad-hoc connection.

  As you can find in the user manual:

  Traditional wireless connection (requires router)
  
  To connect the HP All-in-One to an integrated wireless WLAN 802.11 network, you will need the following:
  
  - A wireless 802.11b/g/n network that includes a wireless router or access point.
  NOTE: 802.11n will only support 2.4Ghz
  
   A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP All-in-One on. 
  
  Page 33:http://h10032.www1.hp.com/ctg/Manual/c02887357.pdf
  

  As an alternative, try feature that allows the mac to act as a router in Mac OS X internet sharing Infrastructure mode:

  http://docs.info.Apple.com/article.html?path=Mac/10.7/en/mchlp1540.html

  A limitation, you should be aware, the Internet sharing security supports WEP in shared only authentication mode that is not supported by the printer you can find below:

  http://support.HP.com/us-en/document/c02871178

  Therefore, you should keep sharing without security password in order to connect the printer to the network.

  It will be useful,

  Shlomi

• TCP/udp connection via the private wifi network

  I want to develop applications using the wireless private network with tcp/udp connection for my Blackberry 8320 (Version 4.2.2.180 without SIM), do I need authorisation from RIM so that they work in the unit? If it is true, how can I get permission?

  I noticed http://www.blackberryforums.com/wifi-hotzone/100800-8320-wi-fi-limited.html

  who says:

  "The Blackberry 8320 with wi - fi connection is limited. The only program that can use the wi - fi is the Blackberry browser... all the third-party programs... ie. Opera Mini, JiveTalk and even RIM's instant messaging programs. Yahoo Messenger, Windows Live Messenger, are all designed to connect using data from EDGE of the phone... None of them can detect or use the wi - fi! »

  If it is true now?

  You can use the interface = wifi parameter in the URL to specify that the connection should be performed by Wi - Fi.  However, please note that this setting is available in version 4.5.0 and highest BlackBerry device software.  Therefore, you must first put your BlackBerry handheld.  FURTER details can be found here:

  What - in different ways to establish an HTTP connection or socket
  Article number: DB-00396

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

• Computer sharing internet with mobile phones on the ad - hoc network

  Original title: ad hoc internet sharing network

  I have only 1 computer at home and 2 mobile phones. My wireless router doesn't work so I can't get access to the internet through a wired connection to my laptop. I wanted to share the internet access from my laptop to 2 mobile devices, but I do not know how to do it. I tried to create an ad hoc network by following instructional videos online, but they do not seem to work for me. I have a laptop Samsung Windows 7 Professional. Any thoughts?

  Hello Mann,

  The manual configuration of ad hoc steps network has really worked for me. I don't really know how much I missed. For my curiosity, I tried to open the link provided by Ramesh above and found some interesting things. I downloaded a software called the virtual router on the site - http://virtualrouter.codeplex.com/. In fact, it has worked for me and made my life so much easier. I just have a good concern, is this completely harmless software for my computer? I have not any refusal of Microsoft Security Essentials of any kind in any case. :)

  Please notify.

  Thanks for your help!

  JM

• Win7 64 bit cannot access my shared folders when I navigate to my computer via the same computer network

  Unable to connect to my own shared folders when I browse my computer over the network to the computer with the actions...

  That is to say: the folder shared C1 x... C2 can access \\C1\x without problem,
  but C1 Gets the error message dialog box not standard descriptions "\\C1\x is not accessible. You may not have permissions... and ends with the specified network name is no longer available. »
  I am the user who created the share and I'm trying to access the share on the same machine, it is shared as this user... what gives?  It's ridiculous!
  One might wonder why a user would access their own local through network shares when they are on the computer that is on the part...
  I have a piece of software (Builder of ship client/server on the same box) running on this workstation, I need to separate a part of the project to allow a remote workstation to work on the part of the drawing.  In order to perform the separation, the software connects to the server ship Builder and a folder (ShipConPSM) that is created when the server is installed, when I run the command split, this requires access to this folder via the "\\servername\ShipConPSM" unc path he quickly denied access and of course fails to perform the split.
  What I have to change to allow C1 to access its own shares?

  Hello Rgmiket311,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the following forum:

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Windows not mark the ad hoc network.

  I've used this feature on my computer before about 6 months ago.  About 2 months ago, I had to reinstall the windows operating system 7 due to some problems I had with the software and my driver cd.  After using the disc of windows 7 dell, I had all sorts of problems.  Drivers have not been installed and ive called dell several times to get help with drivers are reinstalled.  I don't know if this information will help you to help me, but I thought I'd give some information.  Tonight, I tried to set up an ad hoc network so I can use my computer as a wifi hotspot and connect to my ipod touch.  When I went to create, I reach the screen when you type the name of the network, select protection and password etc.  I do all this and then click Next.  The box following dialog that appears says 'windows could not configure jon' (jon is the name I use for the network).  I don't know what is the problem, but I contacted the hardware support dell, they said that it was a software problem and I had to buy a software warranty for something like $250 and then I could talk to the experts in software and they'll fix it.  I told them I could not do that and asked how it was a software problem and the person just said that it was too advanced for the material support team and the software team would reconfigure the entire network... whatever that means.  So, any help would be greatly appreciated!

  Thank you

  Jon

  You can watch the Connectify help or Virtual Router to transform your Win 7 machine into a Wi - Fi hotspot against trying to set up ad hoc. Both are free and make use of the built-in hostednetwork. I use Virtual Router to connect my iPod Touch at times.

  http://www.Connectify.me/

  http://virtualrouter.codeplex.com/

• Get to Eloqua 9 data via the API?

  Can anyone shed light on what is available via the Eloqua9 API to get the Eloqua data and also have a system (such as SQL2012) external data in Eloqua push? We are trying to implement the data cleanup efforts in our new tool of Data Quality Services and we would like to integrate with Eloqua. Can you give us some insight and detail on what we can and cannot do?

  Dennis,

  It depends on your business case here and the volume of data.

  Eloqua offers various options of the Soap API & REST.

  Also low volume & bulk options as well.

  For E9, you can start going through the documentation of the Soap API at the following link: -.

  https://www.eloquatrainingcenter.com/Portal/documentation/API/default.htm

  For authentication and exploitation of low volume of use of the WSDL for the Service: https://secure.eloqua.com/API/1.2/Service.svc?wsdl

  More data volume use the WSDL Service of data: https://secure.eloqua.com/API/1.2/DataTransferService.svc?wsdl

  An air of challenge, you can accomplish connecting SQL2012 to Eloqua defining HTTP endpoints and using components of script for mappings of field and transfer data using SSIS.

  For a more robust solution I would develop a .net stand alone application, and you can call it of SSIS in order automation and business intelligence.

  Good luck

  Daniel Nader Shaheen

• Problems with the transmission of data between the screws

  Hi all.

  I have a question where my program slows considerably during the race.

  The program is a producer-consumer, where I have the main consumer loops and loops producer for USE comms, measure the output power, input for measuring the power, thermal control, etc..

  Regarding the issue, the measures of output loop takes readings and transmits the data to a separate VI which remains running (measure of output processor). This VI summarizes and on average the data and also displays data for the operator to see details if necessary. The operator shows and hides the front panel of this VI with a button on the main program. This VI also returns the summary data to the main VI, where it is read by my loop of consumer.

  The main measures output VI loop takes about 200mS to run when the program is first started. Less than a minute, it is 400 MS, and it's all downhill from there.

  I've isolated the problem to the way I pass data back (I think). I couldn't find a way to pass the reference of the queue between two screws not connected by wires. I open a reference to the VI processor and use Ctrl Val.Set and Get to pass the data back. If I take the intersection of the Subvi data, there is no slowdown.

  My questions are:

  (1) why the data passing by invoking a node of the control on the target would cause the downturn?

  (2) how would I get/pass information of queue between the two screws are not connected?

  (3) Alternately, could I start the VI processor in my main program, run and pass data in and out of it? I want to keep it running, because it is also part of the user interface.

  I don't know that I have not explained this very clearly. I took some screenshots of my code, but don't see how to download here.

  Thanks in advance,

  Jim

  
  

• Which is associated with the value of the HR2000 + spectral data via the pilot VISA

  Hey all,.

  I have the HR2000 + ARE here and I got successfully talk with labview and I can't change the integration time and extract data from the spectrum.  I know that I will have to take into account the lack of the CDC of efficiency regarding the higher wavelengths and lower wavelengths, however I do not think that I am still at this stage.  In my dark spectra, I get about values approximately 8700 through all pixels.  I have not the slightest idea about what exactly that is corresponding.  This is related to a saturation of each pixel value? I know I'm getting closer to this operational, but it seems to present an obstacle in my way.

  Thanks for any help or ideas that anyone can offer,

  -John

  Hi John,.

  Thanks for your post. So you're properly acquire your data of your instrument through VISA. I'm a little unsure where exactly you need assistance. Your question is about entering your data in LabVIEW, or is it to interpret the data you receive? The manufacturer of your device would be able to contribute to explain what values you receive correspond to the terms of the pixels (saturation value or otherwise). However, if you're wondering how to manipulate your data in LabVIEW or need help with specifications for VISA, etc. then that is something we can certainly help you with us!

  Best,

  Courtney L.

  Technical sales engineer

  National Instruments

• How to create the ad hoc network?

  I am sort of new things to advanced, can someone explain me how to create an ad hoc network in a simple way?

  Hi This is very easy, you will find many tutorials online. You can order this one if it does not help to go on this http://www.youtube.com/watch?v=Pw6RTBJFGO4&feature=youtu.be video

• Transmission of data to the host of RT to the FPGA via DMA FIFO

  Hello

  I try to write data from a host of RT on target FPGA using DMA FIFO and then process these data and read then return of the FPGA target to the host of the CR through an another DMA FIFO. I'm working on the NI SMU chassis 1062 q, with the built-in NI SMU-8130 RT controller and target FPGA NI SMU-7965R.

  The problem I face is that I want to send three different tables, two of the same size and the third with different size, and I need one more small to be sent first to the FPGA. I tried to use encode dish with two executives in the FPGA VI. In the first image, I read and write the first table in a while loop which is finite (that is, a finite number of iterations). The second frame contains the process of reading and writing the second two tables (of the same size) in a while loop that can be finite or infinite (depending on a control). The problem is that it does not work. 2 arrays are displayed on the front panel of the RT VI host and works well, however, the table that should have been read in the first sequence does not appear on the front panel of the RT VI host. It is not sensible because if it is not passed from the host to the fpga and vice versa then the second image should not have been executed. Note that I'm wiring (-1) for the time-out period to block the while loop iterations until the passage of each item is completed. So the first while loop has only 3 iterations. Could someone help me undersdtand why this happens and how to fix this?

  I enclose a picture of the host and the fpga vi.

  Thank you.

  If you vote for my idea here and it is implemented, you can even omit the loop FOR fully.

  (I also propose the RE / IM divided inside the loop FOR and perform operations on complex table before the loop the transpose and reshape .) In this way, you only need one instance of these operations. You might even save some unnecessary allocations table in this way)