M14x R1 camera / microphone does not

Hello

I installed windows 7 on my PC and installed all the drivers present on the Dell CD, but my camera and microphone don't work anymore...

I tried to install the driver: "Dell Alienware M14x caméra Firmware, v.1627, A01" but he said: "no device!

I tried to reboot several times to exit all applications that might use the webcam and check everything in the list of processes, but it always says "No Device".

The driver is perhaps outdated? But there is one even on the Web site.

I have not installed any 3rd party webcam software.

I also tried as seen on another forum for install:

-Chipset HM67 Cougar Point, and

-Intel Management Engine Interface, v.7.0.4.1197, A01

Before installing the camera driver, but it still does not work.

I have a solution please?

Thank you

vlct0r
I tried to install the driver: "Dell Alienware M14x camera Firmware, v.1627, A01.

The webcam driver is native to Windows 7 and does not need to be installed manually. The firmware that you downloaded is not a driver. See this article from Dell on the webcam on the Alienware models.

If you need assistance more thanks for posting on the Club of Alienware discussion section. Someone probably knows more about this than here. You need the Dell Webcam Central program, but I don't know where you can find it.

Tags: Dell Laptop

Similar Questions

  • With the front camera, microphone does not work, but with the camera back, it works fine. Please give me solution

    whenever I have to video chat with anyone with front camera on they won't listen to me. Even when I record with fromt camera microphone does not work with the camera back, everything works correctly and even with siri, I can't talk more but when I take a call they can hear perfectly

    Get help with microphones on your iPhone, iPad and iPod touch...

  • IPhone 6s - microphone does not work on all applications except camera and calls

    Hey, I don't know exactly know what happened with my phone. Suddenly, my microphone work on LINE, Whatsapp and almost all other applications that use mic. Except, camera and when someone call me on my number.

    But it does not work on whatsapp and LINE calls. And it also does not work when I snapchat. Only works on the default camera Apps and call through my number.

    I tried:

    -restart my phone

    -hard reset and blink? Reset with the power and the "home" button.

    -read the micro support page. Still no solution.

    TL; Dr:

    my microphone does not work on every apps on my phone except calls through number and approx. of default camera it gives you just that silence when I play it on voice notes. But it works when I record yourself using videos on the default camera app.

    Hello Bllacke,

    Thank you for using communities of Apple Support.

    I see from your post, some applications have a problem to access your Microphone. I know how it is important to ensure that your applications have access to the Microphone and can use this feature. I have a few things I want to try.

    First, tap Settings on your iPhone and then scroll to the last section that lists your apps. Select the applications that use the microphone and make sure that the Microphone is activated (green).

    Then, follow the steps in the article below to close these applications:

    Force a nearby application on your iPhone, iPad or iPod touch

    Then, test the microphone in these applications again and see if it works.

    Best regards.

  • iPhone 5 s microphone does not work during phone call

    Hello! My iphone 5s works really well, sensors, speaker, camera, all right. Similarly, the microphone works really well when I make a call using 'whassapp', 'line', etc and I can record video, talking to Siri, using voice memo and once more my microphone works really well. BUT! When I make call and receive phone call my microphone does not work, they do not hear my voice at all. What will happen with my microphone when you use the cell phone call? HELP ME PLEASE!

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

    More info here:

    https://support.Apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • Satellite A200 - 1 MB microphone does not work on Windows XP

    Hi all.

    I buy a Satellite A200 - 1 MB and when I install Windows XP everything was ok except a little problem:
    The microphone does not work.

    I installed all the drivers correctly, but the problem is the same.
    I read on the internet that many owners A200 - 1 MB have the same problem.

    Is one know how I can fix the problem?
    Thank you

    It's very strange. I installed Windows XP Home SP2 on Satellite U300 edition. It's the same laptop fine but a bit smaller and in my case works cam and microphone. I tested it with Skype. The sound quality is not very good, but it works.

    Are you trying to test also with Skype? Did you check the sound options?

  • Satellite A210 (PSAEG) - Microphone does not work on Windows 7 64 bit

    Hello, the microphone does not work on windows 7 64-bit, the driver that I use is 64-bit Windows Vsta. The volume is implemented maximum and so is the amplification but no way to make it work with the software assistant camera Skype or toshiba.
    Can someone help me?

    Thank you

    Hi Largo09,

    Usually, you need to install the webcam driver and sound to get the microphone working. The microphone is a part of webcam

    As you wrote, Satellite A210 is not Windows 7 64 bit supported, so the only option you have the Vista 64 bit drivers

    In my opinion, you should check if the Microphone is turned on in Windows audio settings. There you can also activate the Microphone Amplifier, which can increase the volume of the microphone.

  • Windows7 - Microphone does not work on my Satellite P300

    I just did a clean install of Windows 7 on my laptop & ^ now my microphone does not work. Does anyone know how to fix this please?
    The laptop model is a Satellite P300 22R.

    I already tried to install the drivers for Windows 7 & I think I've done everything, but this doesn't seem to work.
    Also in the center of the action in Windows 7 it always says I have a problem with my ATI graphic drivers. Also, I tried to fix this problem without success.

    You have installed all the drivers following order normal facilities:
    Win7
    Driver Chipsted
    Storage Manager
    Display driver
    Audio driver
    Driver modem
    LAN driver
    WLAN driver
    The Cam driver and so on?

  • Satellite L300-1 has 3 - Microphone does not work with Windows 7

    Hello, I have a problem with the microphone on my laptop.

    MIC comes with chicony web cam and Windows 7 camera works fine but the microphone does not work.
    Does anyone have the solution to this problem?

    Micro Vista works fine but I wanted to try Windows 7 on the laptop and everything works great except microphone.

    Best wishes in advance.

    Hello

    I think that the reason why Windows 7 is only RC and not a final version that is on the market. I think you should wait until Windows 7's official published.

    However, you have installed the driver for the webcam and soundcard? You can try using the Vista drivers. It should also work on Windows 7.

    Welcome them

  • Internal microphone does not work on Satellite L850

    My microphone does not work.

    I tried to test it using the camera app web toshiba to test the record and he didn't record my voice.

    I tried to reinstall the sound card drivers and the problem persist.

    Thank you for your useful answers.

    Hello

    Please make sure that internal mic has been chosen as default in device
    Panel of-> sound-> recording tab.

    If the microphone device is not visible, check if it of disabled or hidden.
    To check this right click and check the two options called: view hidden devices, see the disabled devices.

  • Satellite L50 - A - 16 H - Webcam + microphone does not work

    Hello

    I have a laptop Satellite L50 - A - 16: updating win8.1 64 bit.
    When I got this new laptop everything worked fine, but later it stopped working.
    I sent it to Toshiba for repair and ofcouse they made and works (the MB has been replaced?), but now, I noticed that my webcam and my microphone does not work. If I try to open the camera it says 'connect a camera' or on Skype, he asks the same thing.

    I read in the forums to look at the BIOS to enable, but there is no activation/deactivation button.
    I tried to search for a driver for the Webcam in the Toshiba site but I couldn't find: c
    and the microphone "working normally" but I when I try to call my friends can't hear me.

    I hope someone can help me with this problem, thank you very much :)

    You know what: best thing you can do as the ultimate test is to backup all your data and reinstall the original recovery image. By default the BIOS settings and install recovery image.
    After ding that you will have to re-buy factory and absolutely identical situation after laptop settings.
    Please test and send feedback.

    In my opinion, if the problem persists it could be hardware related issue. Maybe is cam not connected correctly.

  • On the Satellite P500 microphone does not work well

    I spent $2,000 to buy this Satellite P500 a month ago and soon found that the microphone does not work well. I used the web camera application to record a video to test, the volume level is very low that you barely hear it and it cracks.

    I called the support center, waited for half an hour and finally had someone to talk to me, I followed his instructions adjusted the level of the microphone to 100 and the boost to 0.
    The cracking sound disappeared, but the level of volume is still too low to hear. What can I do?
    Call again and wait half an hour? His Friday 17:00, they will be upset and I'm already mad!

    Hello

    Have you tried to test mic with Skype or a similar application. Friend of mine has Satellite P500-127 and he use it for Skype communication.
    I can hear it fine and everything works fine.

    Do you still have the factory settings (original operating system preinstalled)?

  • H5D-00003 LifeCam microphone does not work

    My H5D-00003 Lifecam microphone does not work if the picture is fine

    Hello

    1. the device worked very well in the computer earlier? If so, remember any changes made to your computer before this problem?

    2. what applications have you tried to use the Lifecam with? The problem occurs in all applications that use this camera?

    Try the methods provided for in article below and check after each method:

    Method 1:

    (a) click Start, click Control Panel, click on herand select manage audio devices.

    (b) select your USB device and select Properties, select levels.

    (c) ensure that the microphone is 100%.

    Method 2: Run Audio playback problems troubleshooting:

    http://support.Microsoft.com/mats/AudioPlayback/en-us?EntryPoint=lightbox

    Method 3: Uninstall and reinstall the Lifecam drivers, downloading the drivers applicable from the following link:

    http://www.Microsoft.com/hardware/en-us/p/LifeCam-cinema/H5D-00001#support

    It will be useful.

  • Internal microphone does not work do not on HP Pavilion dv2608ca.

    I have a dv2608ca HP Pavillion age of 4 years. The microphone has worked for the last 3 years and about 6 months ago, it stopped working. Any time, I record something using the recorder on my laptop, I hear two sounds dull (as if someone was tapping on the microphone with a finger) and then silence. I took it to my local Best Buy for repair. They ended up wiping my own hard drive and then reinstalling Windows Vista. This fixed the problem for a day, and now the microphone does not work yet. I do not anything to the system between the time wherever I came back from Best Buy and 24 hours later when they have stopped working. I tried to check the microphone with Windows recorder and there is no indication that a sound is detected (green bar does not move). No sound is detected with Skype or msn messenger. I tried right clicking the speaker down icon to the right of the screen and check the level of the microphone and making sure that nothing is cut. I tried to go to Panel following the instructions for the Device Manager and cntrl (updating the driver for the result Conexant High Definition Audio.: "driver is already updated"). Please, I beg you! Help? Thank you!

    Thank you for your response. I read the links you provided and knew that I've tried all these steps already. Fortunately, in browing HP Web site, I found a feature that helps you identify the driver for your specific model updates. From this page:

    I clicked on the audio driver and instead of updating my driver, I thought to upgrade to the previous driver. And it worked! I clicked on "Previous Versions".
    Problem solved! It is important that when using this Web site, the correct model of the HP product is identified so that appropriate support can be provided. And I guess I learned that the upgrade is not always the option of sound with my operating system Vista and HP laptop computer!
  • Microsoft LifeCam HD 3000 microphone does not

    Today I bought the LifeCam hd3000. The software is installed properly and the camera gives an excellent image. The only problem I have is that the microphone does not work in any program. The microphone is set as the default device and appears in system properties.

    My computer is auto built... My specs are as follows.

    Microsoft windows 7 ultimate 64-bit

    Service pack 1 with all important updates

    East of card mother Asrock G31M-S R2.0

    The processor is Intel Core 2 Quad Q8400 @2. 66 GHz

    4 GB of ram, dual channel

    Graphics card is Nvidia GeForce 8400

    Any help on this problem is greatly appreciated.

    Thanks in advance

    Hi Burt,

    Thanks for posting your query on Microsoft Community forum.

    According to the description of the problem, you cannot use your LifeCam microphone. The question could be if some settings wrong or drivers necessary for the device is outdated or corrupted. Try it mentioned below as follows and see if it works.

    Method 1.

    Try to run the built-in utility and see if it works. Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save your time and efforts.

    You can check the following link to run the Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

    Method 2.

    If the problem persists, try to start your computer in a clean boot and see if it helps to check if any service or third party application startup is causing this issue. Try to install the driver in a clean boot state and check.

    Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

    How to perform a clean boot in Windows

    http://support.Microsoft.com/kb/929135/en-us

    Note: refer to "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

    Method 3.

    If the problem persists, I suggest you check out the steps in this article and check if this is useful.

    Troubleshoot failures to find the new LifeCam hardware: http://support.Microsoft.com/kb/929087

    Important : this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

    More information: You can see the steps outlined in the article below.

    Troubleshooting: Webcams

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Kind regards

  • Internal microphone does not work and is not in Device Manager

    Original title: internal microphone

    my internal microphone does not work I went to the Device Manager and it shows not even clicking in a white area, is not just turn off there is not aparently, I had all my USB desconected while it interferes not at all, everything started when I moved my computer to another place and make apparently conflicts with a usb port where I plugged my camera now my Skype says is no microphone and can't find all internal on my computer... not turn on or off...
    my computer is:
    Acer Veriton VM498G-Ui5650C desktop PC Intel Core i5 650 (3.20GHz) 4 GB DDR3 500 GB HDD capacity Intel HD Graphics Windows 7 Professional 64 bit
    need help please... Thank you.
    I have a separate speakers, this working great when I connected to the green in front of the processor port, but are disconnected while I'm trying to fix it if I don't get confused.

    Hello

    Reinstall the driver and check with the question.

    To reinstall:

    a. click Start, type devmgmt.msc in the start search box and press enter

    b. right-click on the device and click on uninstall. Restart the computer and allow the driver to install.

    You can also consult the site mentioned below.

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

Maybe you are looking for