M300 Intel Boot Agent problem

Similar Questions

• x 230 sometimes does not start - stops at the screen Intel Boot Agent

  Hi all

  We use x 230 with Win7 ultimate and domainintegration in our business environment. Some devices have problems at startup. Sometimes they stop booting on the Intel Boot Agent screen. When you restart the computer, it is impossible to enter the BIOS Setup too. You are able to press F1 and later, you can type the BIOS password (if you use one) but then it stops again at the same point, as shown above and shows no BIOS.

  Then, several reboots later (more than 5 I would say) it suddenly works fine again for a few rounds of start and stop. And you suddenly have the same problem again without having changed anything seriously.

  BIOS version is updated to the last that I could find on the pages of lenovo. (2.51 Rev.01)

  It is impossible to give a device with such a mistake to beat in the hands of users.

  You have any ideas?

  Thank you

  Martin

  
  

• How to change the HARD drive internal with the boot agent intel

  HP Pavilion DV 6135nr

  Windows XP media center edition

  Replaced the drive HARD internal and have error with boot agent intel.

  How to disable a intel boot agent.

  Helllo machadoas,

  You want to disable the Intel boot agent.

  You should be able to load in the BIOS at startup by pressing F10, go to boot order and move boot agent under the HARD drive.

  Here is a link that talks a little more about the boot agent.

  Let me know if it helps.

• Satego X 200-Bootfailure Intel PXE Boot Agent

  Hello!

  When I start my laptop, an error message will appear like this:
  "Intel UNDI, PXE - 2.0 (build 082)
  Copyright (c) 1997-2000 Intel Corporation

  For Realtek RTL8139(A/B/C)/RTL8130 PCI Fast Ethernet Controller v2.12 (010425)
  PXE - E61: Media test failure, check cable of
  "PXE - M0F: exit PXE ROM.

  I put the right boot order in my BIOS
  HARD DRIVE
  CD
  LAN
  and useful to know for you... when I m disable the network adapter, the laptop starts successfully

  So why does this message appear? What can I do to disable the boot agent?

  Thank you very much

  In your case, I will try to load the default settings in the BIOS. As far as I know you can do this with F9 but try it and tell me what happened.

  Last but not least try to update the BIOS. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

• ODI 12 c Standalone agent problem

  Hi, Experts!

  I upgraded 11.1.1.7 to 12.1.3 ODI

  then installed ODI Standalone agent (using oracle manuals https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=194782698727947 & id = 1960713.1 & _afrWindowMode = 0 & _adf.ctrl - state = dxzghng31_372)

  !) Beginning nodemanager

  (2) boot agent (startComponent OracleDIAgent1)

  and error < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::ERR:Error: could not find or load the class main oracle.odi.Agent >

  This class is in C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\odi-independent - agent.jar and path exists

  Maybe somedody knows how to solve this problem

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT:C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\NODEMA~1 > ODI_INSTANCE_JAVA_OPTIONS value = >

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT >:

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT:C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\NODEMA~1 > REM add any jars/ZIPs/paths additional that must be added at the end of the classpath here. >

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT >:

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT:C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\NODEMA~1 > ODI_POST_CLASSPATH value = >

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT >:

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT:C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\NODEMA~1 > ODI_CLASSPATH=C:\Oracle\Middleware\Oracle_Home\odi\sdk\lib\jython.jar value; C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\lib\. ; C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\. ; C:\Oracle\Middleware\Oracle_Home\odi\agent\...... \wlserver\modules\com. Oracle.WebLogic.Security.encryption_2.0.0.0.jar; C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\lib\*; C:\Oracle\Middleware\Oracle_Home\odi\agent\...... \oracle_common\modules\datadirect\*; C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\*; Odi-independent - agent.jarof C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\; C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\oracle. ODI-agent - jse_12.1.3.jar. C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\oracle. ODI-agent - common_12.1.3.jar. C:\Oracle\Middleware\Oracle_Home\odi\agent\... \sdk\lib\oracle. ODI - SDK - jse_12.1.3.jar; C:\Oracle\Middleware\Oracle_Home\odi\agent\...... \wlserver\server\lib\wlthint3client.jar; "C:\PROGRA~1\Java\jdk1.7.0_60\"\lib\tools.jar; >

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT >:

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT:C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\NODEMA~1 > ODI_LOG_OPTIONS value = ""-Dorg.mortbay.log.class = oracle.odi.logging.AgentJettyLogger ""-DODI_INSTANCE_NAME = OracleDIAgent1 ""-DODI_WORK_DIR = C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\system_components\ODI\OracleDIAgent1\work "«-Doracle.core.ojdl.logging.config.file=C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\config\fmwconfig\components\ODI\OracleDIAgent1\ODI-logging-config.xml" "-Djava.util.logging.config.class =" " oracle.core.ojdl.logging.LoggingConfiguration">

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT >:

  "< 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT:C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\NODEMA~1 > ODI_JAVA_START=""C:\Progra~1\Java\jdk1.7.0_60\"\bin\java.exe the value "- Xms32m-Xmx256m - XX: MaxPermSize = 128 m-Dcoherence.home=C:\Oracle\MIDDLE~1\ORACLE~2\coherence-Dbea.home=C:\Oracle\MIDDLE~1\ORACLE~2-Dweblogic.RootDirectory=C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1 - Xverify : aucun-Djava.endorsed.dirs=C:\PROGRA~1\Java\JDK17~1.0_6\jre\lib\endorsed; C:\Oracle\MIDDLE~1\ORACLE~2\oracle_common\modules\endorsed-Doracle.ODI.home=C:\Oracle\Middleware\Oracle_Home\odi-Ddomain.home=C:\Oracle\Middleware\Oracle_Home\user_projects\domains\base_domain '-Djava.security.policy=C:\Oracle\Middleware\Oracle_Home\odi\agent\...-... " \oracle_common\modules\oracle.jps_12.1.3\domain_config\jse\java. "Policy" «-Doracle.security.jps.config=C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\config\fmwconfig\jps-config-jse.xml""-Dorg.mortbay.log.class = oracle.odi.logging.AgentJettyLogger ""-DODI_INSTANCE_NAME = OracleDIAgent1 ""-DODI_WORK_DIR = C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\system_components\ODI\OracleDIAgent1\work "«-Doracle.core.ojdl.logging.config.file=C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\config\fmwconfig\components\ODI\OracleDIAgent1\ODI-logging-config.xml" "-Djava.util.logging.config.class = oracle.core.ojdl.logging.LoggingConfiguration" >

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT >:

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT:C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\NODEMA~1 > ""C:\Progra~1\Java\jdk1.7.0_60\"\bin\java.exe" - Xms32m-Xmx256m - XX: MaxPermSize = 128 m-Dcoherence.home=C:\Oracle\MIDDLE~1\ORACLE~2\coherence-Dbea.home=C:\Oracle\MIDDLE~1\ORACLE~2-Dweblogic.RootDirectory=C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1 - Xverify " : aucun-Djava.endorsed.dirs=C:\PROGRA~1\Java\JDK17~1.0_6\jre\lib\endorsed; C:\Oracle\MIDDLE~1\ORACLE~2\oracle_common\modules\endorsed-Doracle.ODI.home=C:\Oracle\Middleware\Oracle_Home\odi-Ddomain.home=C:\Oracle\Middleware\Oracle_Home\user_projects\domains\base_domain '-Djava.security.policy=C:\Oracle\Middleware\Oracle_Home\odi\agent\...-... " \oracle_common\modules\oracle.jps_12.1.3\domain_config\jse\java. "Policy" «-Doracle.security.jps.config=C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\config\fmwconfig\jps-config-jse.xml""-Dorg.mortbay.log.class = oracle.odi.logging.AgentJettyLogger ""-DODI_INSTANCE_NAME = OracleDIAgent1 ""-DODI_WORK_DIR = C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\system_components\ODI\OracleDIAgent1\work "«-Doracle.core.ojdl.logging.config.file=C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\config\fmwconfig\components\ODI\OracleDIAgent1\ODI-logging-config.xml" "-Djava.util.logging.config.class = oracle.core.ojdl.logging.LoggingConfiguration ' - DLOG_FILE = odiagent.log - classpath"C:\ ". Oracle\Middleware\Oracle_Home\odi\sdk\lib\jython.jar; C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\lib\. ; C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\. ; C:\Oracle\Middleware\Oracle_Home\odi\agent\...... \wlserver\modules\com. Oracle.WebLogic.Security.encryption_2.0.0.0.jar; C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\lib\*; C:\Oracle\Middleware\Oracle_Home\odi\agent\...... \oracle_common\modules\datadirect\*; C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\*; C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\odi-standalone-agent.jar; C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\oracle. ODI-agent - jse_12.1.3.jar. C:\Oracle\Middleware\Oracle_Home\odi\agent\lib\oracle. ODI-agent - common_12.1.3.jar. C:\Oracle\Middleware\Oracle_Home\odi\agent\... \sdk\lib\oracle. ODI - SDK - jse_12.1.3.jar; C:\Oracle\Middleware\Oracle_Home\odi\agent\...... \wlserver\server\lib\wlthint3client.jar; "C:\PROGRA~1\Java\jdk1.7.0_60\"\lib\tools.jar; "oracle.odi.Agent - INSTANCE = OracleDIAgent1 >

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::ERR:Error: could not find or load the class main oracle.odi.Agent >

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT >:

  < 30.03.2015 15:31:13 MSK > < INFO > < 2015516322::OUT:C:\Oracle\MIDDLE~1\ORACLE~2\USER_P~1\domains\BASE_D~1\NODEMA~1 > ENDLOCAL >

  < 30.03.2015 15:31:13 MSK > < SEVERE > < error: null >

  I found the reason of this problem. Problem was quoted in commODIEnv.cm and agent.cmd... many citations (quotes in quotes, that's why java becomes crazy)

• "When try to turn on my computer: Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid

  Original title: configuration of the CRA

  Hi, I got this message then try to turn on my computer:

  "Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid. "Please check the Windows documentation about the configuration option BOW and your reference manuals of the equipment for more information.

  can someone help me?

  Hi sugenghariyono,

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  ·         Are you able to boot to the desktop?

  Follow the steps in the article.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  For reference:

  Advanced Troubleshooting for General startup problems in Windows XP

• Motor recovery Firmware Intel management agent

  The Intel management engine Firmware Recovery Agent does not work on my new (renovated) 615-AZ3-UR15 all-in - One desktop. He pointed out that it is impossible to check the updates on the computer because there is no internet connection. But the computer is connected to the internet. I checked to make sure that the appropriate exceptions exist in the Windows Firewall. Does anyone know what maybe the problem with the connection of this app?

  
  

• 8.1 Windows cache after the Boot Manager problem

  Hello world

  Try to install Windows 8.1 (or 7!) via Boot Camp 5.1 and faced serious problems.

  I use a Mac Pro (mid-2012) 2 x 3.06 GHz Xeon, 64 GB ECC DDR3 1333 with a NVIDIA GeForce GTX TI 980 with 6 GB GRAM flashed. The only other mod is a Sonnet Technologies USB3 PCI - e card.

  The installation seems to work very well. I go through the Assistant Boot Camp, choice of installation in the first screen. Selecting Bay 2 with a 1 TB HHD and option "erase the disc and create a single partition for Windows. I have a Windows 8.1 (and 7) installation disc which is recognized. Installation went well.

  I created the machine and it's for this, install the updates and new applications during the first load of time. I get to the screen, newspaper with my Microsoft account details and the office responsible for a few seconds then it goes blue and gives me the error connection CACHE_MANAGER.

  This happens when I try and install Windows 7 also! Exactly the same problem.

  Any help would be amazing!

  Remove the Sonnet and the test. You have the original GPU supplied with the MP?

• Reboot and select good Boot Device problem - my PC does not start!

  Hi all

  Whenever I turn on my computer I get the message "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key.

  I checked the diagonistics material and these are the results:

  Test CPU-

  Hard drive: failure of the connection Test - Error Code: BIOHD1

  Memory - past

  I don't think that the issue is a faulty connection. My reason to believe so because I think that I had a virus on my computer (I was not able to confirm) I tried to delete the last time I was able to use the computer. Then I turned off the computer to restart, but unfortunately, that's when I got this error message.

  I had this problem once before (about 3 years ago) and I was not able to solve this problem, so I just stopped using the PC. Then one day my Dad turned on the computer (a few months later) and it worked all of a sudden.

  Anyone know what this problem is? How can I solve this problem?

  Any help is greatly appreciated! Thank you very much for your time and effort!

  Additional information:

  It was originally a windows 7 PC, but I have upgraded to windows 10, which is the current operating system.

  Product: HP p6620f

  I managed to start my PC again.

  I have unplugged all connections and left it that way for about 24 hours. Then I plugged everything back in and all of a sudden the PC worked again. I don't know if it will last, but right now it works.

  I'll write another post if something changes.

• Flow of HT 7-5709 - Boot/startup problems

  I just bought the HP Jet 7 tablet.  The first time I turned on the Tablet, I saw the HP logo for a few seconds and the device off.  The dots has not yet come full circle.  I thought it might be a power problem, so I plugged it and saw the charging symbol on the screen.  I waited for a while and tried again.  I had to hold the power button on 5 + seconds until I could see the backlight lights up so I know it wasn't sleep.

  This time, he said "Automatic repair of preparation."  Points of fact just two revolutions and the device suddenly stops.  Next time, he had no any text and points to the subject a spin before stopping.

  I let it charge overnight.  I tried from the start this morning and it alternates between the two start modes.  Points are about a year and a half laps if there is no text and about two if it says "Automatic repair of preparation."

  I'm able to get in the boot without difficulty menu.  The diagnostic system is no problem.  The only thing that stands out on the screen "System information", it is that the "born on Date" is "00/00/0000." The date of the main battery is "27/10/2014."

  I went to the website listed on the start menu (hp.com/go/techcenter/startup), but don't see anything relevant.

  If I select F11 (System Restore) in the start menu, it returns me to a screen with an HP logo and the text "Please wait".  Points do two or three laps and the powers of the device down.

  Suggestions?

  Yes, I had this problem and a few others here did too.  The solution is to run the battery completely down and it will say 'reset CMOS' when you put it to the top.  It should then be started normally.  You can expedite the discharge of the battery by running UEFI Boot Menu F2 System Diagnostics = > System Tests = > large trial = > loop up to the error.  If you have an OTG adpater, you can also plug a USB hub without power or whatever USB devices you have and who's going to pull it down faster.

  Another option is to disconnect the battery, HP Jet 7 Tablet Maintenance and Service Guide says this can be done by simply removing the back cover, but this seems incorrect.  I watched my 7 steam and the cable of the battery falls below the intermediate mount cover so this must also be removed to expose the system board and the battery connector, it is held by six screws.  I opted to run the battery instead.

  Once the shelf upward, toward the latest EFI firmware update should hopefully prevent him of happening again.

• Satellite Pro 4600 - Boot CD problem

  Hi people,

  Remember that Satellite Pro I mentioned many months ago? The one with the flashing orange?
  Well, I changed the MoBo Ant that he finally turned on. But a problem arised... it does not read CD. Whenever I insert a system disk, it is said: "insert the disk in the drive system. Press any key when ready... "I have tried with the CD bootable certainly many, but nothing happens. I tried with another work MoBo but that's it. I've updated the BIOS, I have set up the boot sequence, nothing changes.
  Oh, yes the cd-rom unit works for sure.

  What should I do?
  Thank you
  David

  > What should I do?
  Set the default BIOS settings and try again.
  HARD drive is recognized in the BIOS settings?

• Satellite A30-PSA30E Intel 2200BG wireless problem

  Hello
  I bought the new wireless card intel 2200BG miniPCI for my Toshiba laptop. I have card connected to the miniPCI slot free and both cables are connected as well.
  My problem is that this hardware switch on the right side of my laptop does not work (no led light). The original Intel software is posting I have material activate this card. Can you help me please?

  Hi Michael

  I hope that you have connected the card properly. The white cable must be connected to the HAND and a black to the power supply please check if the card is recognized and properly installed. The status is displayed in the Device Manager. The wireless adapter should appear under network adapters.

• Strange Boot CD problem - Satellite 1805

  I have a Satellite 1805-S207 that cannot start from the CD. I went to press F12, then C, but I noticed that is not yet test drive (I should get an access light?). I sent the order of priority in the BIOS to boot from the CD first, but who hang the machine. I thought that maybe the CD-ROM drive is faulty, but I can still burn CDs and reading works very well.

  I updated the BIOS to the latest version and also updated the DVD player to the latest version. So far, this does not solve the problem. This mean that I can not install if my HD goes South :-(.

  Any ideas?

  A possible work around would be to create a diskette that initiates the loading of the CD. Someone at - it looks something like that?

  Paul

  Hello

  have you tried to change the boot priority in the BIOS?

  Good bye

• Graphics HD 530 Intel (r) card problem

  Hello guys,.

  I tried to contact Lenovo support team but cannot find all possible ways to contact them.

  I am, however, having a hard time to solve my problem of Intel Graphics 530.

  I have a laptop Lenovo Y700-15ISK, what is new and I got new band just a couple of days, but this is actually not a good start with Lenovo.

  The problem is that my screen goes black sometimes, and I have to close my laptop and then turn it back on.

  I tried to solve the problem with Lenovo Solution Center and I got this error code: WVC007002-UL7XPG below the video card: Intel(r) HD Graphics 530 (Test of mathematical operations).

  I don't know really what I have to do in this case, and how I can communicate with Lenovo, because they have no possible way to receive customer emails which is a really bad sign.

  Any help would be apperciated.

  Kind regards

  Hello

  I had almost the same problems with my Y700 with the same hardware failure on the graphics card Intel 530 Mathmatical test chip. I just got the phone with support from Lenovo and they basically updated the Intel graphics driver with the latest beta drivers on the Intel Web site. The pilot, I had was the last that is displayed on the Lenovo for my Y700 page which was the 10.18.15.4271 version (http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-y-series-laptops/y700-15isk/do...). The driver downloaded the support person there is version 15.40.18.4380 (https://downloadcenter.intel.com/download/25749/Intel-Beta-Graphics-Driver-for-Windows-7-8-1-10-15-4...). She did some update to the solution Center and revived material analysis and my graphics Intel 530 now passes the test of mathematics. She said, the keyboard and the touchpad freeze and flickering of the screen could be linked to the old driver Intel VGA in order to update the drivers could solve the problem. There are things one additional support they can do to try to resolve these problems, but I thought I'd see what happens with the first Intel driver patch.

  When it comes to communicate with Lenovo, there is a link on their support site to schedule a time for them to call you. I think you can do a live also chat session, but that option is not 24/7, as the hotline. See the page contact us. In my view, do not put your serial number to get all the options to connect with them and I had some problems with getting my serial number put in shape with Chrome. After that put it in the news, by clicking on submit this turn and never change the display of the page, it has been accepted. I tried to use IE and was able to get my serial number set. Their support site has some problems, but the technical support which helped me was quite helpful and was able to get everything updated pretty quickly.

  I'll keep you posted if I still have problems with the new drivers.

  Good luck!

• 2 13 yoga boot configuration problem

  Hi all

  After a boot on my laptop problem, I need the result of the following command as an administrator:

  bcdedit/enum all

  If somenone kind could stick here, it would be nice

  THX

  Guillaume.

  Hello

  I own 2 13 yoga and I ran for you the bcdedit/enum all. Please find below the results:

  Microsoft Windows [Version 6.3.9600]
  (c) Microsoft Corporation, 2013. All rights reserved.

  All C:\Windows\System32>bcdedit/enum

  The firmware boot manager
  ---------------------
  identifier {fwbootmgr}
  displayorder {bootmgr}
  {9619ad2f-fac6-11e4-bf22-8b60e97cdca5}
  {9619ad2c-fac6-11e4-bf22-8b60e97cdca5}
  {9619ad2d-fac6-11e4-bf22-8b60e97cdca5}
  {9619ad2e-fac6-11e4-bf22-8b60e97cdca5}
  Timeout 0

  Windows Boot Manager
  --------------------
  identifier {bootmgr}
  partition Device = \Device\HarddiskVolume3
  path \EFI\Microsoft\Boot\bootmgfw.efi
  Description Windows Boot Manager
  settings regional en - US
  inherit {globalsettings}
  default {current}
  RESUMEOBJECT {95a4fa05-fac6-11e4-bf22-8b60e97cdca5}
  displayorder {current}
  toolsdisplayorder {memdiag}
  timeout 30

  Firmware application (101fffff)
  -------------------------------
  identifier {9619ad2c-fac6-11e4-bf22-8b60e97cdca5}
  Device description USB EFI

  Firmware application (101fffff)
  -------------------------------
  identifier {9619ad2d-fac6-11e4-bf22-8b60e97cdca5}
  EFI DVD/CDROM description

  Firmware application (101fffff)
  -------------------------------
  identifier {9619ad2e-fac6-11e4-bf22-8b60e97cdca5}
  EFI network description

  Firmware application (101fffff)
  -------------------------------
  identifier {9619ad2f-fac6-11e4-bf22-8b60e97cdca5}
  partition Device = \Device\HarddiskVolume4
  path \EFI\Microsoft\Boot\LrsBootMgr.efi
  Description of the Lenovo recovery system

  Windows boot loader
  -------------------
  identifier {current}
  Device partition = C:
  path \windows\system32\winload.efi
  Description Windows 8.1
  settings regional en - US
  inherit {bootloadersettings}
  recoverysequence {9619ad32-fac6-11e4-bf22-8b60e97cdca5}
  recoveryenabled Yes
  isolatedcontext Yes
  allowedinmemorysettings 0 x 15000075
  OSDEVICE partition = C:
  SystemRoot \windows
  RESUMEOBJECT {95a4fa05-fac6-11e4-bf22-8b60e97cdca5}
  NX OptIn
  bootmenupolicy Standard
  detecthal Yes

  Windows boot loader
  -------------------
  identifier {9619ad32-fac6-11e4-bf22-8b60e97cdca5}
  device = \Recovery\WindowsRE\Win [\Device\HarddiskVolume2] ramdisk
  Re.wim, {9619ad33-fac6-11e4-bf22-8b60e97cdca5}
  path \windows\system32\winload.efi
  Description of the Windows recovery environment
  in local - we
  inherit {bootloadersettings}
  DisplayMessage recovery
  displaymessageoverride recovery
  OSDEVICE ramdisk = \Recovery\WindowsRE\Win [\Device\HarddiskVolume2]
  Re.wim, {9619ad33-fac6-11e4-bf22-8b60e97cdca5}
  SystemRoot \windows
  NX OptIn
  bootmenupolicy Standard
  WinPE Yes

  Out of the hibernation
  ---------------------
  identifier {95a4fa05-fac6-11e4-bf22-8b60e97cdca5}
  Device partition = C:
  path \windows\system32\winresume.efi
  Description Windows Resume Application
  settings regional en - US
  inherit {resumeloadersettings}
  recoverysequence {9619ad32-fac6-11e4-bf22-8b60e97cdca5}
  recoveryenabled Yes
  isolatedcontext Yes
  allowedinmemorysettings 0 x 15000075
  FILEDEVICE partition = C:
  FilePath \hiberfil.sys
  bootmenupolicy Standard
  debugoptionenabled No.

  Windows memory Tester
  ---------------------
  identifier {memdiag}
  partition Device = \Device\HarddiskVolume3
  path \EFI\Microsoft\Boot\memtest.efi
  Description Windows Memory Diagnostic
  settings regional en - US
  inherit {globalsettings}
  BADMEMORYACCESS Yes

  Settings of the EMS
  ------------
  identifier {emssettings}
  bootems No.

  The debugger settings
  -----------------
  identifier {dbgsettings}
  DebugType series
  DEBUGPORT 1
  baudrate 115200

  Defects of RAM
  -----------
  identifier {badmemory}

  Global settings
  ---------------
  identifier {globalsettings}
  inherit {dbgsettings}
  {emssettings}
  {badmemory}

  Boot loader settings
  --------------------
  identifier {bootloadersettings}
  inherit {globalsettings}
  {hypervisorsettings}

  Parameters of the hypervisor
  -------------------
  identifier {hypervisorsettings}
  hypervisordebugtype series
  hypervisordebugport 1
  hypervisorbaudrate 115200

  Resume loader settings
  ----------------------
  identifier {resumeloadersettings}
  inherit {globalsettings}

  Device options
  --------------
  identifier {9619ad33-fac6-11e4-bf22-8b60e97cdca5}
  Description Windows Recovery
  RAMDISKSDIDEVICE partition = \Device\HarddiskVolume2
  RAMDISKSDIPATH \Recovery\WindowsRE\boot.sdi

  C:\Windows\System32 >