8.1 Windows cache after the Boot Manager problem
Hello world
Try to install Windows 8.1 (or 7!) via Boot Camp 5.1 and faced serious problems.
I use a Mac Pro (mid-2012) 2 x 3.06 GHz Xeon, 64 GB ECC DDR3 1333 with a NVIDIA GeForce GTX TI 980 with 6 GB GRAM flashed. The only other mod is a Sonnet Technologies USB3 PCI - e card.
The installation seems to work very well. I go through the Assistant Boot Camp, choice of installation in the first screen. Selecting Bay 2 with a 1 TB HHD and option "erase the disc and create a single partition for Windows. I have a Windows 8.1 (and 7) installation disc which is recognized. Installation went well.
I created the machine and it's for this, install the updates and new applications during the first load of time. I get to the screen, newspaper with my Microsoft account details and the office responsible for a few seconds then it goes blue and gives me the error connection CACHE_MANAGER.
This happens when I try and install Windows 7 also! Exactly the same problem.
Any help would be amazing!
Remove the Sonnet and the test. You have the original GPU supplied with the MP?
Tags: Windows Software
Similar Questions
-
The hard drive on the Macbook pro was repartioned, all the boot camp and other drivers updated and Windows installed from the installation DVD. All the Windows updates available from 2012 (installation disc is 2012) until today have been installed and Boot camp 5.1 with all its drivers installed. Restoration was launched with an image of an external hard drive and a system repair disc system. Once Windows loads after the login screen, it crashes. A blue screen appears with the error code 0 x 00000034 and mention cache_manager... Windows restarts by itself and I can only use it in safe mode, which means that I can't download or install upgrades or programs.
Analyze the dmp file since the first crash with Windows debugging tool showed that the problem seems to lie with
AppleHFS.sys and svchost.exe with Bug Check 34 {107, ffffffffc0000420, 0, 0}.
Here is the link to the complete analysis of the dmp for details file:
https://1drv.Ms/u/s! AuzUtP_j9nLagwWWqWUTre4qNYmu
Thank you very much in advance for your help
Moschtermeedchen
AppleHFS.sys/AppleMNT.sys are used to allow access to filesystems OSX JHFS +. Restoring Windows on Mac backups can be painful. If you have already fresh install of W7 on the internal drive, try the restore without installing any driver BC. Please be aware that such a restore is not aware of the partitions on your internal drive and can erase your internal drive.
-
Satellite L650 - 10 H - inputs multiple Win 7 in the Boot Manager
I have Toshiba Satellite L650 - 10H and I have recently reinstalled my Win 7 64 bit.
There is no problem at all except that initially to laptop, I get this [http://tinypic.com/r/se7uja/6].3 Win 7 entries in the Boot Manager
I always choose the first and all is well.
It's like the old copy of win does not delete but one that I formatted disks...Y at - it an option to get rid of him?
I don't mind reinstalling again if I know it will help.Hello
I seems that Boot Manager Windows 7 contains three entries and the other two entries are useless.
I think you can remove the last two entries in the Boot Manager.
How to do this?
Well, I m using the EasyBCD software.
It is a free tool and you can easily manage this settings.After installation, start the tool.
In EasyBCD toolbar, you can check the option called Add/Remove entries.
Well, I think that here you should be able to remove the last two entries. -
Hi all
I installed Sierra but need to wipe my drive to improve performance and have implemented the installer of macOSSierra on a USB key and necessary to reach the Boot Manager to start the installation.
I think you hold down the Options/ALT key during restart to get to the Boot Manager, but nothing happens when I do that - it just goes to the login screen. I use a small apple wireless keyboard and wonder if it is active during the early stages of the startup?
What I am doing wrong?
Thank you in advance.
Julian
When you use a wireless keyboard, you have to wait until after hearing of the Mac startup sound, then press on and hold the option key.
If you hold down option from the start key, the Mac will not see depression key because the function Bluetooth does not become active until after the initialization of the Mac hardware.
You can find more details here: Mac OS startup keyboard shortcuts
Tom
-
Multi Boot options: where is the Boot Manager?
In the future I want to run Win7 64 bit, XP 32-bit and another OS. So a triple boot. I use 3 small SSD or I can triple 2 small SSD partition and run them in Raid 0. I am attracted by the latter due to the increase in performance. I wonder where is stored the Boot Manager and can I put it on all 3 drives if I go with this scenario. I am looking for better control, I guess. Mechanical control is far superior to the software control but is not always available unfortunately.
Find the folder in C:\Boot.
Once Windows 7 is installed the boot.ini file is no longer used (do not delete it, just does not make any changes)
EasyBCD can manage the names and the startup list:
http://NeoSmart.NET/DL.php?id=1J W Stuart: http://www.pagestart.com
-
How do I repair/recharge the Boot Manager for Win XP without the OEM disks?
I have an IBM Thinkpad G41 with a configuration dual-boot for awhile. I am donating to the laptop at my church and must remove Linux (don't ask) and make XP installed OS only.
The problem is that I need rebuild/repair Manager start Windows from the installation of Linux successor whit its own boot manager (Grub).
I have not the disc XP OS then where can I find the Boot Manager or the files that I need to reload/reconstruction.
XP fills the primary partition on the HARD drive.
While I can let it load Linux installed it would be useless to anyone and just takes place.Thank you.
Art
I have an IBM Thinkpad G41 with a configuration dual-boot for awhile. I am donating to the laptop at my church and must remove Linux (don't ask) and make XP installed OS only.
The problem is that I need rebuild/repair Manager start Windows from the installation of Linux successor whit its own boot manager (Grub).
I have not the disc XP OS then where can I find the Boot Manager or the files that I need to reload/reconstruction.
XP fills the primary partition on the HARD drive.
While I can let it load Linux installed it would be useless to anyone and just takes place.Thank you.
Art
Download asw. MBR HERE , save it to your desktop. Open the program. Click 'Fix MBR. " Follow the prompts.
-
I have windows xp after the installation of service pack 3 I can only start in safe mode
I have windows XP after the installation of service pack 3 I can only start in safe mode?
Hello
· You get the error message?
· What happens when you try to start in normal mode?
Method 1
Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.
This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:
(a) minimal
(b) network
(c) safeboot: minimal (alternateshell)
For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems
RESOLUTION
(a) click Start, run and type MSCONFIG
(b) click the Boot.ini tab
(c) If you have a dual-boot system, select the entry that is appropriate under the [operating systems]
(d) in section downstairs, Startup Options uncheck / hisFEBOOT
(e) click OK
(f) restart Windows
The entry/SafeBoot are removed from the Boot.ini file.
Method 2:
If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.
Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.
How to restore Windows XP to a previous state
Step 2:
I suggest you follow the troubleshooting steps form the article and check if it helps.
How to troubleshoot an installation fails on Windows XP Service Pack 3
http://support.Microsoft.com/kb/950718
Note: System requirements to install Windows XP SP3
Reference: Learn how to install Windows XP Service Pack 3 (SP3)
Hope the helps of information.
-
Original title: upgrade Windows 10
I made an iso file for windows 10. I am waiting to upgrade until all the bugs are being developed. My question is: will the iso file of windows 10 still work to upgrade my computer to windows 7 after the date limit to install the free version?
The ISO will work after the date limit, but you can buy Windows 10 after the date limit, if you don't improve and activate it before that date.
Windows 10 is delivered as a service:
Windows July 10 release - build 10240
Windows Update 10 November - build 10586 (with many updates depuis.13,.29,. 36)
If you want to take advantage of the free offer, you must do so before July 29, 2016.
If you the newer versions are released before then, you can always download and install when it becomes available.
You could also install it now then download updates via Windows Update as soon as they are available.
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
- How to: determine if a device application or hardware is compatible with Windows 10
- Will remain the documents and applications, or install app must
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
Failed to start Windows 7, not found Boot Manager?
I have a Sony Vaio VGN-SR26GN with Windows 7 32 bit installed.
He froze, ctrl + alt + delete does not work I turned it works but it was not able to start windows, all I ended up with is a black screen with cursor mobile, even with safe mode.
I tried recovery, known last good configuration, etc... but nothing has worked
Then I started getting the blue screen of death with the BOOT MANAGER NOT FOUND or something of the sort
I tried to use the CD to repair windows 7 but it couldn't detect any installation of windows or another partition... I tried the bootrec different commands but nothing worked
Now when I turn on the computer, it will start the Vaio repair utility, open a blue screen and nothing happens for hours.
I don't know if it is a hardware or software problem. What else can I try to do?
Thank you
Hello
References to Vista also apply to Windows 7.
It is a serious mistake and "may" not be fixable without a professional technical support
a real computer store (not the leeks and the glances at a BestBuy or other BigBox stores) or your
Support of the machine system.Sony - Contacts
http://eSupport.Sony.com/us/Perl/contact-land.plSony - drivers
http://eSupport.Sony.com/Perl/select-System.plSony - Support
http://eSupport.Sony.com/---------------------------------------------------------
This is the troubleshooting methods to try to resolve the problem:
Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
return and then try to startup repair.)How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7Try the disk Options recovery or Windows 7 startup repair.
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlRecover the Vista or Windows 7 bootloader from the DVD
http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+from+the+DVDRecovering the Vista Bootloader with EasyBCD (Windows 7)
http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+with+EasyBCDFix the Vista Bootloader of Windows (Windows 7)
http://NeoSmart.NET/wiki/display/EBCD/repairing+the+Windows+Vista+bootloader------------------------------------------------------------
Unable to boot into windows vista-windows boot configuration data file is missing required
information - Repair Corrupt Boot Manager (Windows 7)
http://www.troublefixers.com/unable-to-boot-in-Windows-Vista-Windows-boot-configuration-data-file-is-missing-required-information/How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and
problems starting in Windows Vista (Windows 7)
http://support.Microsoft.com/kb/927392How to fix "BOOTMGR is missing" in Windows Vista (Windows 7)
http://cyberst0rm.blogspot.com/2007/04/how-to-fix-Bootmgr-is-missing-in.htmlError message when you start Windows Vista: "the Windows Boot Configuration data file is.
missing required information"(Windows 7)
http://support.Microsoft.com/kb/927391Vista tip: Fix error "BOOTMGR is missing" - a quick way to (Windows 7)
http://Lifehacker.com/251733/Vista-tip--repair-Bootmgr-is-missing-errorSee this article here - to repair/rebuild the Boot (Windows 7) Bootrec.exe tool configuration data use
http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html=========================================
If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
protected. The manufacturer of your system will also sell the physical DVD cheap since you already
Clean Windows. You can also do an ERD on another computer.If you need to repair disks - these help repair Windows not re-install.
How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
On Windows 7, after the update of Lightroom 2.6 to Ligthroom 6 I am unable to correct photo
The program (Lightroom 6.3) systematically freezes and needs closure after every temptation of correction development.
The development and mailing of the crush program program ' are at Microsoft did not help.
My system dump here:
Lightroom version: 6.3 [1052427]
License: Permanent
Operating system: Windows 7
Version: 6.1
Application architecture: x 64
The system architecture: x 64
Number of logical CPUs: 4
Processor speed: 2.5 Ghz
Built-in memory: 8155.1 MB
Memory real available pour Lightroom: 8155.1 MB
Real memory used by Lightroom: 1035.4 MB (12.6%)
Virtual memory used by Lightroom: 1007.6 MB
Cache memory size: 100.3 MB
Maximum number of links used by Camera Raw: 4
SIMD optimization of Camera Raw: SSE2, AVX
The system DPI setting: 96 DPI
Composition on the Desktop enabled: Yes
Views: 1) 1920 x 1080
Input types: multipoint touch: no, touch integrated: no, built-in pen: no, touch external: no, External plume: no, keyboard: noParents to the graphic processor information:
AMD Radeon HD 7800 M seriesCheck the supported OpenGL: past
Vendor: ATI Technologies Inc.
Version: 3.3.13399 context 15.200.1062.1004 the base profile
Renderer: AMD Radeon HD 7800 M series
LanguageVersion: 4.40
The application folder: C:\Program Files\Adobe\Adobe Lightroom
Access to the library path: E:\Lightroom\Lightroom catalog Qnap - 2.lrcat
Settings file: C:\Users\Joe\AppData\Roaming\Adobe\LightroomInstalled modules:
(1) external module connected mode Canon shooting
(2) external module of shooting in connected mode NikonMarkers Config.lua: no
Adapter n ° 1: supplier: 1002
Device: 6827
Subsystem: 31e1002
Revision: 0
Video memory: 1003
AudioDeviceIOBlockSize: 1024
AudioDeviceName: 1 - Philips FTV (AMD High Definition Audio Device)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: not initialized
Direct2DEnabled: false
GPUDevice: not available
OGLEnabled: trueThanks for the help!
Go to Preferences, click the performance tab, and then uncheck the box.
-
Black screen after the boot animation
My wife has just contacted me to tell me her phone is broken.
She was the motorcycle 2nd Gen LTE
Whenever she tries to turn on, after the boot animation screen becomes black (the screen lights up but). The phone is charged, she insists.
She wants me to fix his phone when I'm working.
Any advice?
What are the options should I expect to see on the fastboot screen?
I am hoping does not need to do a reset to factory if possible...
Ended up doing a complete reset.
Thanks for the offer of solutions.
-
Cannot use windows update after the new installation of xp sp2
Cannot use windows update after the new installation of xp sp2
How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
activate Windows xp after the expiry of the grace period of 30 days
How to activate windows xp after the expiry of the grace period of 30 days, if the user does not have internet on PC? the user can get a new activation code on the microsoft site?
"rajesh kur" wrote in message News: 6811c2fa-5fa2-4c2c-805f-2347c8e571c2...How to activate windows xp after the expiry of the grace period of 30 days, if the user does not have internet on PC? the user can get a new activation code on the microsoft site?
Use phone Activation
--Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers
-
Windows calendar after the system restore notes no longer exist.
The Windows calendar after the system restore notes disappeared forever, or can be found somewhere?
Hello
First we recommend that you search the .ics files confirm the windows calendar old files are present on the hard drive.
Visit this link for more information: http://windows.microsoft.com/en-US/windows-vista/Tips-for-finding-filesWindows Vista has an option to cancel the system restore. To do this, follow these steps.
1. open the system restore by clicking the Start button, all programs, accessories, clicking System Tools, and then click System Restore. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
2. click on undo system restore and then click Next.
3. proceed to review your choices and then click Finish.Your computer will restart. When you are finished, you will see a confirmation that the cancellation is complete.
For more information, see this link: http://windows.microsoft.com/en-US/windows-vista/Undo-System-RestoreI hope this helps.Kind regards
Syed
Answers from Microsoft supports the engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Need for a solution when the Boot Manager is missing.
* Original title: startup
need for a solution when the Boot Manager is missing
Startup Repair,
http://www.SevenForums.com/tutorials/681-startup-repair.html
Maybe you are looking for
-
OfficeJet 4500 G510n-z: failure sending a fax from Word G510n-z
I use a laptop Toshiba Satellite running Windows 10 with, AFAIK, updates. I am trying to send a Word document by fax to my connected OfficeJet 4500 wireless. The printing process works, I get the dialogue Send Fax, I dutifully fill. The document goes
-
specific line of reading a file
is there a VI to read a specific line of a csv file. I have a csv file that is too large to load and unfortunately whlle spreadsheet file reading, is useful in some cases, you can not specify which row to start from, it can begin in the first line. I
-
You are prompted to reactivate Windows after the updates but the activation screen empty.
Yesterday, after the Windows updates, I was prompted to reactivate Windows in 3 days but activation dropdown was blank. This is MGAdiag report. Bill Diagnostic report (1.9.0027.0):-----------------------------------------Validation of Windows data-->
-
He can't access the English way, he was. and it worked for a while shpot!
-
I was wondering if anyone can help? I have an old Compaq Presario Desktop (DQ079A), I need to run to run as a backup (long story)... under Windows 98SE (yet more long story). I have a Western Digital IDE drive hard 80 GB that I work perfectly on anot