M4 Aqua camera very dark!

Similar Questions

• aspirezs600 crystal eye webcam is very dark

  Web cam very dark, lights up immediately, is their a control for cams adjust how to solve, using windows 10

  OK can't get fixed cam then think prior

  Thanks to the fixation of lighting

  everything is good now

• The camera of my C850D-115 Satellite is very dark

  The light of my laptop Satellite C850D-115 camera is very dark and can hardly be seen. So I don't know if my camera is activated by a Trojan horse.

  Is there a way to increase the brightniss of the light of the camera?

  Did you remove the protective film from the front of the camera?
  The cam is protected by a sheet that should be removed before using the cam.

• Satellite L755-M1E9 - integrated webcam very dark or black

  Hello

  I have SATELLITE L755-M1E9 on windows 7 64 bit and I have a problem with the webcam.
  Its very dark with white and black colors image quality
  I just try to change its setting of the TOSHIBA Web Camera Application and setting webcam Skype
  I found the 'ColorEnable' box is not active.

  So, how can I fix it?
  Thanks in advance...

  Hello

  It is not easy to understand exactly what is happening.
  All you can do right now is to check all available parameters.

  Please enable night mode option. The pic will become lighter.

  Test it please.

  

• HP MINI 1000 Webcam very dark

  Why is the webcam on the mini 1000 very dark.

  Are there solutions for the future or present solutions available? I searched without a bit of luck.

  THE POSITION of FINAL SOLUTION (Please paste this into the first page)

  With all due Respect, this thread is turning into a hell hole of misinformation.   There is a massive confusion on two simple solutions to this problem.

  THE PROBLEM: HP designed this for a webcam webcam 'outdoors' by affixing a piece of dark, tinted 1 cm x 1 cm of Ribbon in front of the web cam, behind the screen overlay.  These shades the video extremely dark in all conditions except in natural light of the Sun.

  #1 SOLUTION: install the software that allows you to control the brightness/gamma.  If you increase both, your image will be slightly higher. Software options include (scroll to previous pages for links) Skype, MSMessenger, controls integrated Windows Movie and the HP Webcam Driver free (linked to the page 1 or 2).  THIS SOLUTION IS NOT A SOLUTION.  IT IS A MINOR SOLUTION AND YOUR WEBCAM WILL LOOK STILL DARK AND GRAINY, but it will be a little clearer.  HERE IS a LINK to THE OFFICIAL HP driver which is free and allows control of the brightness/gamma.  It's a quick download and easy installation.  Yet once this is only a partial solution: the official HP camera settings: ftp://ftp.hp.com/pub/softpaq/sp35001-35500/sp35414.exe

  SOLUTION #2: it's the only real solution.  Just open the top of your screen (it's super easy to make and the screen is designed to be opened and closed).  Take a pair of pliers, tweezers and remove stained tape that causes all the problems.  Problem is fixed at 100%. I do not understand why why so many people are so adamant against trying this.  This isn't major surgery.  You literally pop open the display (no screws or anything necessary), and you take a pair of tweezers and pluck a piece of thin ribbon.  That's all.  The unit will work perfectly without additional software or hardware changes.

  This is a great how-to with a video: How to remove the color ribbon

  How do with images on the other: How-to's

  Note that you can do both.  #2 solution will fix the problem of obscurity.  #1 sOlution will give you more controls.  My suggestion is to carry out the withdrawal from the Strip to solve the problem of dark camera, and then install the driver of HP to give you even more control camera.

  UNLESS YOU HAVE A NEWER SOLUTION, MORE INNOVATIVE TO THE PROBLEM, PLEASE DO NOT POST THE SAME THING MORE AND MORE ONLY SAYING ILS ARE A NEW SOLUTION.

  Message edited by SchnellFowVay on 02/17/2009 09:31

• Dell Latitude 10 ST2: Screen very dark after the Windows Update 8.1 & gameplay of Diablo 2

  Hello community,

  I just got a new Latitude 10 ST2, and I really appreciated the help until after that I updated for Windows 8.1 and played some Diablo 2. For some reason, my brightness is now always very low, regardless of whether the Adaptive brightness in my power management setting is enabled or disabled. I can manually change the brightness, but it has very little effect. It seems that the maximum brightness is really low for a reason any.

  I don't know if Diablo 2 has nothing to do with this problem, but I though that I would include it here because it uses very outdated graphics techniques that seem not very compatible with Windows 8.1. I had to change the compatibility settings of the game executable for Windows XP Service Pack 2, force them to run with 16-bit colors and also to disable the composition of the bureau. After closing the game, icons on the desktop still seemed a little wide (they looked rather 16-bit color and had some weird artifacts) and I had to restart the tablet to correct. After the reboot of the Tablet, the desktop icons were back to normal, but my light issues began to arrive.

  My first attempt at solving this problem was in the shape of the tablet. I used my USB stick that has the factory settings on it to format the Tablet and reinstall Windows 8. The process was a success, and I had no problem of brightness either. However, after the update to Windows 8.1, then by restarting the Tablet, my issue with the brightness came back.

  My second attempt was to try to update my drivers. I ran the auto updater provided with the Tablet, and it updated my BIOS. Unfortunately, it has not fixed the problem at all. Then, I took a look in the BIOS and found levels of brightness in the video section. The parameters are the following:

  Brightness on battery: 7
  Brightness of AC: 15

  I've tried corresponding to the brightness of the battery at 15, but it has no effect. The light problems don't occur that the Tablet is connected to a power outlet or not, I wasn't really that surprised that it didn't work. A maximum brightness of 15 is normal? (what is a percentage?) I don't want to change these settings without knowing exactly what they represent to avoid damage.

  My third attempt has updated the chipset drivers which includes the video driver. I installed the chipset driver and suddenly after that the screen went black a few times during the installation of the brightness has been completely restored and colors looked nice and bright again. However, when I rebooted the Tablet I found that the problems of brightness was back. Very rarely when I restart the Tablet, the brightness is normal again, but it is super rare. A subsequent reboot simply results in brightness problems return immediately.

  A few other things worth noting that come with the light problems:
  -All color gradients are not smooth. You can very clearly see the differences in brightness when a picture goes to a light color to a dark like a lot of buttons in Windows 8 start menu. It reminds me a lot of 16-bit color;
  -Whenever I try to change the display settings in the Intel Graphics and Media Control Panel, nothing happens. No matter how much I fiddle with the brightness, contrast or gamma, nothing changes, even after you apply the settings.
  -Diagnostic in the BIOS tests said that everything is OK;
  -The complete diagnosis provided by the PC Dell Diagnostics program showed that each test passed successfully.

  I really hope that someone can help me with this problem. The screen is also very dark, it makes it quite difficult to use tablet. Thank you!

  Kind regards

  StevenD91

  Thanks for the reply! After much trial and error, I discovered that my graphics driver has been be corrupted by AVG 2014 somehow. After yet another format and reinstall of Windows 8, but without AVG 2014 this time, everything works great! : D

• Why is my screen very dark?

  my screen is very dark and it is a new computer using Windows 10. The screen was very bright and it is now difficult to read. The system has had a lot of problems earlier. I turned off the computer for about an hour and a half and now it is gray.

  This looks like a problem with the function of Adaptive brightness of Windows 10.

  I suggest to go in:

  1. Parameters
  2. Power options
  3. Change Plan settings
  4. Change advanced power settings
  5. Scroll down to view
  6. Select "enable adaptive brightness.
  7. pass the two selections on 'OFF '.

  That being said, please keep in mind that there is a support forum for Mozilla Firefox, not Microsoft Windows, we help you gladly your questions of Firefox but issues relating to associated Microsoft products really apply to Microsoft Support or community Microsoft Forums.

  I hope this fixed your issue, if it has changed then please your "Resolved" issue, so that we know that it has helped.

  Sincerely,
  Kyle

• Satellite Pro A200 - display very dark

  My first post on this forum-

  I have a satellite a200 pro with a very dark screen, it works fine with an external monitor.

  I replaced the drive and the full screen with elements well known with no joy

  am I missing something simple? any thoughts welcome

  > I have replaced the drive and the full screen with elements well known with no joy
  That s very strange and to be honest I can't say with certainty why these spare parts not help you solve this problem. Is the external monitor looks OK and the chip chart isn t the troublemaker. So the problem must be linked to the internal screen or FL inverter.

  I recommend you contact the service provider authorized Toshiba to get more details about these issues and get compatible parts.

• Satellite Pro M10: image on the screen is very dark

  I have a portable Satellite Pro M10, which has a black screen, i.e. the backlight does not work. There is an image on the screen, but it is very dark. When you connect an external monitor, I get a normal picture on this screen.

  Information from other messages here, I conclude that there is a problem with the backlight of the lcd screen or the inverter. I checked all connections, but it does not solve the problem. If I bring the laptop to a service center how much it will cost about for repair? The thing is 2-3 years, so if it is very expensive I could better get a new laptop.

  I'm sure I'll be able to change the inverter Board myself, but how am I going to be able to determine that the inverter is the problem? How to get a new inverter? Is anyone of you know the number of good product?

  My Pro M10 itself has PS630E-G205Z-OF product number.

  Hello

  I agree with Tobi. You sounds description as a faulty FL inverter.
  This part is placed behind the LCD screen under the lid.
  As mentioned this part isn t very expensive and you could order the partner of Toshiba service in your country. But be aware that if you have no experience of replacement if you ask technicians for assistance.

• Satellite Pro L300 - 29 c very dark display

  Hello

  The display on my Satellite Pro L300 - 29 c is very, very dark. It's dark, both during POST / in the BIOS and configuration once Windows loads. The brightness of the screen (Fn + F7) is set to the maximum. If I plug in an external display, which works perfectly. I can say that this model is not a physical wheel or something similar that controls the brightness of the screen.

  Should I have a hardware failure? Is this something fixable by the user?

  Thanks in advance.

  I can't say for sure, but I think FL inverter is faulty (backlight) and it should be replaced.
  The FL Inverter control the backlight. It is important that FL Inverter are not too expensive part.
  I take in a Toshiba certified maintainer and ask for help.

• Satellite Pro L20 with a screen very very dark!

  Help me!

  I have a L20 Pro Sam last week and it worked very well. Now when I turn on the screen is very very dark. About, I can do on the Windows logo when it loads, but I can't seem to make it bright again. When I plug in an external monitor it doesn't have this effect on the external monitor - some help please!

  Hello

  I agree with Tom, I would also say that there is something wrong with the Fl inverter or with the tube FL. well, is the only way to solve the problem is to replace the broken parts. In this case, you will need to contact Toshiba service in your country.

• Problem of backlight Satellite Pro L10 - the screen is very dark

  Hello

  I've got a L10 Pro of the Satellite with a backlight problem - the screen is very dark.
  How can I confirm if it is the backlight themselves who have failed or the backlight inverter Board?

  Also, can someone point me in the right direction for a copy of the workshop manual?

  Thank you very much!

  Hello

  As you have said that this problem could be linked to the failure of inverter FL and in most cases, the FL inverter needs to be replaced.
  It's a little bit complicated and it s not desirable to try to replace it to your own hand as this may damage the screen of laptop computers.
  This is why I would really recommend contacting a Toshiba ASP because of two important reasons:
  First reason is that you can order the ASP compatible FL inverter and the second reason is that an ASP could provide help how to replace this part.

  If you want to know where and how he placed s then you can visit this page:
  http://www.irisvista.com/tech/laptops/Toshiba-Satellite-A105/remove-replace-LCD-screen-1.htm

  Of course, this page shows only the wow of instruction to remove and replace the Satellite A105 FL inverter, but the procedure is not very different from the Sat L10.

  But like I said above; If you have no experience don t do anything, which could damage the laptop!

• Satellite P200 screen is eventually died - now very dark

  Hello

  My laptop screen (Satellite P200) is eventually died.
  He had been much flicker when opening the laptop but settle.

  The screen is very dark and you can see just the windows etc. I can't connect a second monitor and run from that.

  -Is the screen, backlight went?
  -I'm out of warranty, how long does it take for an extended warranty through? The site has offered me one for relief.

  Any information would be great.
  Thank you
  Simon.

  Hello

  First you will not get an extended warranty, if you haven't bought it.
  If you warranty is no longer valid, then you will have to pay for the repair.

  Now a few words about your question;
  I think that your FL inverter is dead. The problem described in job ads seems to be a fault of inverter FL. This small part controls the backlight of the screen and causes this problem.

  I recommend contacting the technician of laptop (certified partner) and I will ask the Fl inverter assessment and if necessary I would work out a replacement.

  Good bye

• Portege R700 internal to screen very dark but can use the external monitor

  Hi guys,.

  just had a question about my Toshiba Portege R700 as the screen went white and I couldn't see the screen or sometimes I could and it was very dark!

  However, the laptop could start up as normal and I could use it normally through an external display!

  Subsequently, I replaced the screen and it started working again (happy days)!
  However, a few weeks down the line the same problem again apparently did screen dies.

  I take off again and disconnect and reconnect the screen just to see if that would solve the problem and he did, back and working again. I even tried the old screen I swapped and that works too!
  So I paid £140 + for a new screen that I didn't need, my question is what is the problem?

  Could not find anything else on this topic so would appreciate any help thanks

  Ross

  Hello

  It is difficult to say what might be wrong here usually black screen can be related to a faulty FL inverter.
  But laptop computer s display supports a backlight Led FL inverter should not be a problem here
  Maybe some loose contacts caused this

• Satellite L100-109 - display sometimes very dark on restart the standby or startup mode

  I have a new L100-109. When he goes to sleep, and then I restart, the screen is very dark, it is unreadable. The only way to remedy this is to re - start the PC.

  This sometimes happens at startup upward as well, and I have to reboot to get back on the screen.

  Does anyone have any suggestions?

  Hello

  Looks like the backlight of your screen will always be activated.
  I don't know the reason for this, being sometimes reinstall the whole system can solve problems like this.

  Good bye