M40-129 linux acpi problem

Hey everybody...

during the last days I installed linux gentoo on my m40-129 - everything was going well until I tried to run the ACPI.
can't use the ipw2200 wirless card shipped in combination with a kernel acpi. It fails from the 2200 with "impossible to send a TX_POWER command. Disable acpi in the kernel solves this problem, but a laptop computer without acpi is completely unnecessary...

is there something wrong with the acpi table or is this a bug in the acpi kernel sources?

Thanks guys...
Jens

Hi jens
Unfortunately Toshiba don t support the Linux OS and each user should seek only solution. I found an interesting link where a Linux user describes how to handle this problem. Please check on http://www.linuxforum.com/linux_tutorials/22/1.php

Good luck!

Tags: Toshiba

Similar Questions

  • Satellite M40-129: PCMCIA card does not work with Linux

    I have D-Link DWL-G650 with Atheros Chipset that is supported under linux (madwifi). But if I boot Linux map is not found. I tested the card with a Fujitsu Siemens laptop and it worked out of the box!

    No idea why it doesn't work with my M40-129?

    Hello

    As you know Toshiba doesn't support Linux and there is no Toshiba drivers for the Linux operating system, but I was able to find this page useful Toshiba on laptop with Linux configuration:
    http://newsletter.toshiba-tro.de/main/

    You must check the machine OS compatibility and other areas.
    I m you will find many useful tips.

    Good luck

  • Big problem with m40 129 (memory and sd card)

    Hello
    A week ago I bought the last m40 129 of the saturn store in Düsseldorf, Germany. Because I speak not German I formatted the laptop and installed my version of prof. under ms Windows XP license. After installation, I was checking the system information and I discovered that system memory is 512 MB! After you have installed all the drivers and the service Pack 2 of xp memory count has not changed. I checked the bios, it is always the same.
    The other problem is the sd card slot, even I installed the necessary drivers, it does not work. As I'm living, in the Netherlands, I don't know what to do. Please give help.
    Nice look

    Hello

    As far as I know, the set comes with 1 024 MB RAM. Please check the specifications of the laptop. I hope that the aircraft was properly packed and you're the first person who opened the package. Otherwise contact the seller and try to check what can be the problem. You can also contact partner in your country, and they can check if there is some malfunction of the equipment.

    In my opinion that you n t need no matter what BIOS update. CD Tools & Utilities is not supplied with this unit. Each user must make one his. I hope you did a. The problem is that the drivers installation must be done in the right order. If you use the CD of tools there must be a description of how to do it on the right track.

    To use DVD-RAM, it must also be installed DVD-RAM driver. Like I said check the CD of tools if you have made a. There must be a single html file with explanation how to do this.

  • Satellite M40-129 and drivers Win7

    Hello

    I just installed Win7 on my Toshiba Satellite M40-129. It was really hard... Windows refuses to complete the installation until I deleted pcmcia.sys in the windows system folder.

    Now I have the problem that my pcmcia cardbus is working nor my SD card reader. As soon as I ask for Win7 to update driver PCMCIA, the doesn´t of the computer unbootable until I have again to remove pcmcia.sys.

    Now my question: I can live with having one for not working the PCMCIA port, but there all the drivers available for windows 7 and the Cardbus SD?

    Thank you very much.

    Technohead

    This old Satellite is not supported for Win7 and you won't find any driver for it. It is not easy to configure the hardware on these old books but Win7 has good drivers base and, after several Microsoft updates most of the equipment must be installed correctly.

    What you can try is to try to install the driver designed for another model of laptop. Perhaps satellite A100 or Satellite A200. I put t know if this will help but you can test it in any case.

  • Need Soundcarddriver for M40 - 129

    Hello

    I can't use the preinstalled in Windows XP HOME (some network and management Funktion I need are not in XP HOME) and so I installed the Version of XP PROFESSIONAL.
    Now, I need the Soundcarddriver (SoundMAX) for my M40-129 (not M40x).
    On the drivers here is only the software for virtual sound, but is not the driver, only a tool for Soundenhancing.
    Any tips?

    Thank you. And sorry for my bad English, ich, hope you understand my problem.

    Best regards

    2Toshi

    Hi 2Toshi,

    Have you tried to install XP Prof with the recovery CD? I think this should work, because it is a complete picture of Toshiba. No additional drivers to install.

    Good bye

  • Does anyone have experiences with Windows Vista on a Satellite M40-129?

    Hello
    does anyone have experiences with Windows Vista (Business) on an M40-129? Any suggestions on the proper drivers and advice are welcome.

    Best regards
    Sascha

    Hello

    I have an owner of the M40 motorway m but I didn t install Vista on my laptop.
    Why? good Vista needs a lot more material resources like the XP.
    In addition many additional applications that are running on my system are not compatible with Vista.
    Last but not lease I didn t find the drivers of Toshiba for the M40 on the Web site.

    I think that the drivers Vista missing on the page is not a problem serious because important factors as driver graph, sound driver, lan and Wlan driver can be downloaded from the website of chip manufacturing.

    Anyway, if you want to install Vista on your M40 I would create an additional partition and install the OS on the second partition.
    In this case, you can use the two BONES; XP and Vista.

    To my knowledge the Vista installs a clean boot manager and it should be very easy to switch between XP and Vista.

    Best regards

    Good bye

  • Satellite M40-129 Harddrive Bluescreen Error

    Hello
    I got a M40-129 last year, created 2 Partitions and installed XP Pro SP2. Everything worked very well, but a few months I drive hard-error-Bluescreens. When I run Chkdsk afterwards, I get messages about bad securities Index or orphan data segments (translated from German). Normally I reinstall my laptop then go to a backup Image and all is well again. But these errors occurring weekly/daily now.

    I called the support, but I was told that the support would be only grab the laptop and see if the problem still occurs. But that's what I'm already doing. Is it possible to fix this?

    Best regards
    Spoony

    P.S Partition Magic shows my a score of 88 Type which is big 204 MB. Any idea what this score is used?

    Hello

    First something about your partition hidden.
    The M40-129 Sat was delivered with the Media Express Player.
    This player is pre-installed on the hidden partition.

    Well, HARD disk system errors and the file can result from a variety of problems, such as hardware failures, outages of electricity, poor system maintenance, virus and human error.

    When you run Chkdsk with parameters, such as / f / / r, Chkdsk repair errors related to file system structures.

    I recommend the Microsoft information page. Here, you will find many useful information about HARD drive failure and why this happens.
    http://www.Microsoft.com/technet/prodtechnol/winxppro/reskit/c28621675.mspx

    Good luck

  • M40 - 129 - trouble

    Hi guys,.

    2 weeks ago, I bought my satellite M40 129 with
    Harman/kardon. I had 2 problems.

    1) SOUND through the HEADSET
    Songs (CD or mp3s) I'm listening on my 3 year old office
    through good quality well real, true stereo headphones.

    On my laptop...
    -If I listen to it with the built-in speakers, very well.
    -If I listen to it with headphones, poor quality sound like mono.
    I also tried with Virtual Sound to make it better,
    but I don't get the real stereo as my office.
    The sound card on my desktop computer is more than 5 years,
    but it sounds a lot better than the M40 129 through the headset.

    No idea how to improve?
    (I have the driver 5.12.1.5240 version)

    2) NOISE WEIRD PEEP
    I don't know how to describe it, but I get noise weird peep
    my laptop. Sometimes it disappears, but it doesn't come
    Precedent.

    No idea how to get rid of this noise to peep?

    I haven't worked a lot with the laptop again.
    I hope not to have surprises.

    -Aykut (of Germany)

    Hello

    (1) if the sound is good enough try to do better using a graphic equalizer on the reader you use and also check the sound properties and audio especially in the advanced audio properties. I noticed that fake adjustment result with very poor sound quality
    (2) I found an info that some strange noises occur if the sound card power is set on the power supply Mode. Please try to change to no. energy savings.

    Hope that will help you. Your device is a new and I believe that any update of the BIOS is necessary.

  • When I'm playing games like Fifa07 Satellite M40-129 freezes

    When ia´m to play games like Fifa07 my phone freezes from time to time. I have a Satellite M40-129 with the latest version of the driver 6.14.10.6525.

    I get the error message (German): http://img265.imageshack.us/img265/2337/grafikkartentreiberdf9.png

    Dxdiag: http://img508.imageshack.us/img508/2250/grakatreiberup4.jpg

    Isn't there anything I can do to avoid those who freezes.

    Hi Sascha

    Is the laptop freezes only when you play this special game or it freezes by other applications, games, etc?
    Don t know exactly why it happens, but if the laptop freezes only during playback the Fifa07 then it might be a problem of compatibility of graphics driver with this game.

    Do you use the graphics driver for the Toshiba page?

  • Upgrade of RAM for a Satellite M40-129

    Hello
    I want to upgrade my Toshiba M40 - 129 1 GB RAM to 2 GB of RAM. A RAM is on top of my NB, but where can I find the other?
    Execuse my English, but I live in Germany and my last English lesson is 20 years ago.

    Thank you

    WEUD

    Hello

    The second slot should be placed at the bottom of the unit.
    Please check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14145&MessageID=51673

    User: stefmil has already found! It was hidden under the first module.

  • Satellite M40-129 - speed WLAN

    I have
    -Satellite M40-129: Centrino PM730 / Win XP Home / 15.4
    -Intel BIOS: Version 1.20 / 1.05.41
    -WIFI: Intel (r) PRO/Wireless 2200BG Network Connection, Version 9.0.1.9
    -Connection to the Internet by the provider Arcor 1Mbit / Germany

    My connection to the local network is of about ~ 110 KB/s.
    My WiFi is of about ~ 60 KB/s.

    Arcor support sent me a technician to check my connection.
    The connection is good. His laptop WLAN gets ~110kb/s
    But my WLAN connection is bad :-(

    How to increase speed WLAN?

    -Aykut

    Hello

    Check the properties of the card wireless in Device Manager. On the Advanced tab, there is transmit power setting. I hope that it is defined at the highest level. Your card is standard g and it should work up to 54 MBit per second.

  • M40 - 129 - switch power-Led

    Hello

    I would buy the new model M40-129. But there is something that bothers me a bit:

    It's the big blue Power LED placed left at the keyboard.

    Y at - it the ability to turn off the light or low intensity it?

    thx a lot

    Markus

    As far as I know is not possible.

  • Adapter Satellite M40 - 129 Centrino PM730

    Hello

    I have the portable 'Satellite M40 - 129 Centrino PM730' computer
    I need a 2nd power adapter, because I'm working on 2 places (and I'm lazy to wear)
    The one I have is model Liteon: PA-1750-08.
    (1) is the only model that works, and that another one would also work?
    (2) I want to buy it online, what other adapters are also compatible for my laptop.
    I have no idea for the "key words" I can search in google or ebay?
    (Currently the results I get for my research are not so good.)
    (3) for example, I found Liteon model: PA-1650-02. This would also work with my laptop, is there any mapping?

    Thank you
    Aykut

    Post edited by: aykut76

    HI Marc,

    Please visit the following link. The adapters are listed on the bottom after the batteries.

    http://www.computerbatteries.co.UK/Gb3/m/Toshiba/Satellite-M40.html

    Kind regards

  • Satellite P100 - 115 ACPI problems on Linux

    I have a P100-115 (United States is P105 -?) with geforce 7600. I tried to install suse 10.1. Everything was fine, but after awhile, I noticed a strange thing. The main vent only lights when 65 ° C is reached and the vent on the side left (graphics card) lights never. Then I checked the temperature through Nvidia driver and to my surprise, there were 85 C. So I have concluded that the fan control does not work.

    The main fan light probably because of thermal protection in portable computer because I tried to play with trip points and there was no effect. Now I have to run suse with acpi = off switch because it makes the fan runs all the time. But you can imagine how annoying, this can be. I s there is another user who uses linux unde P100 and P105 and his control of the fan works?

    Has anyone tried to play with the table DSDT of ACPI at?

    Hello

    Well, as much as I know that the Linux Suse 10.1 is a beta version and in my opinion some bugs may appear.
    I have read that many people have problems with Suse 10.1 installation or operation of this Linux distribution.
    I recommend you to visit the official site of support of Suse for more details.
    In addition, you can try to install an early version on Suse or you use a different linux distribution.

  • Linux: network not recognized on toshiba m40-129 (gentoo 2005.0)

    Hey everybody,

    Today, I tried to start the installation cd of gentoo on my new laptop.
    It has an intel 2200 wireless and a marvell yukon wired NIC.
    modprobe nkge module it loads but it does not find the network interface cards.
    ipw2200 is detected automatically at startup but it say that the driver could not be loaded with the code '-2'. "

    Quote:
    ipw2200: PIV - 2.2 - boot.fw load failed: reason - 2
    ipw2200: unable to load firmware: 0xFFFFFFFE
    ipw2200: unable to save the network device

    someone at - it a trick?

    Thanks, jens

    Hi locus.

    Sorry, I don't know much about Linux systems, but these two Forum links are provided by some users.

    There you can check the compatibility of your laptop Linux hardware:
    http://newsletter.toshiba-tro.de/main/index.html

    And here is a link to Toshiba Linux Japanese
    http://Linux.Toshiba-DME.co.jp/Linux/index.htm

    Good luck
    Rudi

Maybe you are looking for

  • model 1229 - can be upgraded or refurbished?

    I have some old book of mac apple pro model 1229 - can be upgraded or refurbished? I need to edit music? Thank you.

  • LabVIEW slow / crashes

    Dear Sir. We are developing an application in 2012 of Labview in which data are read from MODBUS TCP/IP port. These bits of data (about 100 pieces) configured as Boolean flags are processed in order to generate the value change events. When many of t

  • Data logging using queues

    Hello I'm constantly measure data (i.e. a voltage signal) using DAQmx and storing data. In an old facility, I stored the data in a table, and whenever the table reaches a certain size, I recorded it in a file. However, this resulted in the loss of da

  • The 1324 error message

    I have a friend who happens to have a new HP computer and its operating system is Wondows 7. When her computer updated itself on Windows Update, all sorts of issues that happened. She called HP and they helped when attaching the computer to the opera

  • Checked Windows Mail for messages after 8 days and all my emails are missing.

    original title: Lost email After 8 days, I went back and checked Windows Mail messages.  Shows 90 + messages unread; then "Windows server has stopped...". "No emails. nothing.  A test message to me has been a success, but 8 days of messages have been