M6n113dx question - hardware or software?

Similar Questions

• T61 wireless hardware or software failure?

  When I finally used (in September), my wireless on this old T61 (6459-CTO) worked perfectly, but tonight I can't even view available networks. I know that my local network wi - fi doesn't work because the other devices can connect, but cannot see it or other networks of neighbourhood on this ThinkPad notebook. Suits the list of networks available in that it displays a message «Windows cannot configure this wireless...» "I am running Windows XP SP3, the machine is vintage 2008, ipconfig/all said the wireless card is a 11 a/b/g Wireless LAN Mini PCI Express Adapter, Device Manager shows the device works correctly, hardware and software-defined radio (ThinkVantage) switches are on, and the wi - fi on the front panel led is bright and blinking occasionally. There were a few Microsoft Updates since wi - fi last worked, but nothing has changed to my knowledge. How can I determine if it is a software or a hardware problem? Thanks in advance - JCW2

  Download and burn a 'live' DVD in Linux, like mint and boot from it.

  If you are able to connect wireless here, the question is within Windows.

  If this is not the case, there is a problem with the hardware somewhere.

  http://www.linuxmint.com/Edition.php?id=105

  Good luck.

• difference in the hardware and software calendar

  Hello world.

  I have a few questions about the time of hardware and software.

  1. What is the difference between hardware and software?

  2. What does hardware mean? PC or DAQ as usb 6211?

  3 when I use "DAQmx Timer", it means that I use the hardware timing?

  Thanks for your help!

  Hi Xiang00,

  >> 1. What is the difference between hardware and software?

  Hardware timing is more accurate, because it uses the on-board clock. Avoiding the is less precise because it depends on the performance of the PC.

  >> 2. What does hardware mean? PC or DAQ as usb 6211?

  "Hardware" means the hardware such as USB-6211 DAQ.

  >. 3. when I use "DAQmx Timer", does this mean that I use the hardware timing?

  Yes. You can find more information in the knowledge base DAQmx Timing and sampling frequencies.

  Best regards

  Yusuke Minami

  Sales engineer, OR the Japan

• Error when you try to install Windows XP Service Pack 3: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  Windows XP SP3 problem

  Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.

  This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "  I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?

  It's certainly interesting!

  If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
  SHOULD work!
  I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.
  Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=PV-60484-2
  and try the SP3 Setup file again.
  But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:
  1. have you safely backed up ALL your data?
  2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact.

• When you try to run a system recovery I get this error: cannot start Windows. A recent hardware or software change might be the cause. OxcOOOOOOf

  When you try to run a system recovery I get this error; OxcOOOOOOf

  Original title: error OxcOOOOOOf

  My laptop crashed. I used my initial recovery to start. I get a message from Windows Boot Manager as follows:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have this disc, contact you system administrator or computer manufacturer for assistance.

  File: \Windows\system32\winload.exe

  Status: OxcOOOOOOf

  Info: Seelected entry could not be loaded because the application is missing or damaged.

  It does not work. Suggestions and no, I have not modified before the crash.

  I loaded my recovery disk for my 32-bit home edition of vista Hp pavilion dv6700 cto entertainment lapt top and after going through the recovery process I just get this mechioned of the screen in the original question. How ever during my recovery process never got far enough to enter my product code, he asked just a two disc and disc supplamentry and then gave me a blue screen black for a minute or two then rebooted and showed the failure of start OxcOOOOOOf screen... what should I do?

  Hi Anthony206,

  Since you've already tried to use the Windows Vista recovery disc has received from the Original Equipment Manufacturer (OEM).

  From now on, you can only contact OEM for the use of the recovery feature.

  I hope this helps.

• Windows Vista failed to start. hardware or software might be the cause... Please someone help

  When I turned on my pc this morning, he said cannot start windows. hardware or software may be the cause. It gives me 2 options. run the Startup Repair tool recommended. and s tart windows normally. I tired the twic to the Startup Repair. From the beginning, he says immediately repair attempt, but eventually I shut down my pc via the power button, because it seems to never end. Both its managed like an hour and 20 minutes and nothing. I try once more and I'll let it run for a few hours. What should I do if it does not work. ?

  Hey man think for the help... I reinstalled windows... I was able to save the part where my old files were running in windows.old.   Just copy all the files.  Eh, it could not have something to do with the question but why update of microsoft framework 3.5 service pack 1 do not install

• Can you identify this element of Vista installed at the factory... it is hardware or software?

  I have a desktop HP Pavilion Media Center under Windows Vista Home Premium. I am trying to solve a problem with the TV Tuner. I tried everything I can find to solve the problem, but without success. I just need an answer to this...

  On the bottom of my computer, I see a list of hardware and software that has been installed at the factory. I am interested is displayed as "GENUINE WINDOWS VISTA HOME Premium TUNER DIGITAL".

  My question: is - this software or hardware? If it is a software, I can't find to uninstall and reinstall, which is what I would do. If it is hardware, what it look like? I would like to locate and replace it.

  Thank you

  Back to the original question, to which I have the answer. "GENUINE WINDOWS VISTA HOME Premium DIGITAL TUNER" is Microsoft Vista which is loaded on the hard drive. It is NOT hardware and software it's my operating system.

  There is no guessing what is in my PCI-E slot. It's My Nvidia GeForce 9800 GT 1024 MB graphics card. There is no tuner embedded, or "video" as you call it.

  To finalize my contributions to this post, I have fixed my original problem I came here looking for advice for in the first place. It's actually a corrupt Windows operating system file that runs my TV tuner, which caused all my problems. I reinstalled my Vista operating system to its original state, and now the TV tuner works fine.

  Thank you for making at least an attempt to help out me. As you can see, over 6 billion people on the planet, only came forward... I appreciate it.

  Mr. Fix It

• Hi people. Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

  Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

  Hello

  You will be able to use the watch in Europe.

  There is no regional differences in the hardware and the software can be configured to your chosen region. The supplied USB power adapter will have to pine trees located in the United States. A travel adapter will allow you to connect it to the European outlets.

  Alternatively, you can buy an Apple USB power adapter that is located in your country of destination / country.

  For example:

  • 2-pole:
    • http://www.Apple.com/FR/shop/product/MD813ZM/A/Adaptateur-secteur-USB-5-w-Apple? FNODE = 83
  • UK 3-pin:
    • http://www.Apple.com/uk/shop/product/MGRL2B/A/Apple-5W-USB-power-adapter-folding - pins? FNODE = 83

• Update hardware and software Qosmio G30-198 for hight performance

  Hello

  I have a Qosmio G30-198.

  I have to use Autodesk Civil 3D program in the laptop.
  This is a CAD program that requires a lot of ram and a transmission of data high-speed HARD drive.
  To do this, it is absolutely necessary to update hardware and software for civil use with good performance.

  I need to buy and install HDD SSD, install more RAM (which is the maximum allowed in this computer?) and I need to install Win 7 Professional 64 bit.

  Please,

  If anyone can tell me how I can further improve the performance of the laptop, please tell me.
  I don't know what steps I need to keep.

  Can you help me?

  Thank you very much.

  Hello

  The RAM can be expanded up to 4 GB
  As far as I know this laptop supports the Intel® 945 PM Express chipset and supports this chipset may 4 GB of RAM
  http://Ark.Intel.com/products/chipsets/22817

  The HDD or SSD drive update shouldn't be a big problem.
  Usually the built in SATA controller should be able to manage the common SATA SSDS

• Does iOS App Store allows the old inherited app to download to support more hardware and software?

  I'm using iphone 4 on ios5.1 and can not download waze, instagram etc... because they ios7.0, app or the new paypal required ios8.0. (so even if I upgrade my ios to 7.1.2 I won t be able to use it, it s a big problem)

  There are many applications no longer works on ios5.1.

  At Apple archived older versions of applications and will make available this backwards compatible?

  Developers can submit apps for obsolete equipment and iOS version outdated on the App Store?

  Does iOS App Store allows the old inherited app to download to support more hardware and software?

  Thanks for your help.

  You can download older versions of applications if you have a computer or other device running a newer version of iOS. This explains how do.

  Install the latest compatible version of an application on an earlier version of iOS or OS X - Apple support

• •To play .mp2v and .dvr-ms files, you must have a DVD decoder hardware or software installed on your computer.

  To play .mp2v and .dvr-ms files, you must have a DVD decoder hardware or software installed on your computer.

  You need a DVD decoder.  Maybe VLC media player will work.  If this isn't the case, you will need to buy a program to read these files (or DVD) on your computer.

• Error message: Windows could not open possibly due to a hardware or software upgrade with a black screen and white on Windows XP starts.

  Original title: suddenly Windows XP does not open

  After using the computer someday, he would not start the next time I lit. Windows tried to start but failed and went to a black and white screen saying windows could not open possibly due to a hardware or software upgrade and invites me to try opening windows normally, safe mode, using the last well-known congig, etc... Every choice has ended up doing the same thing, windows tries to start and end up back in the black and white screen.

  Hi Brian,.

  1. you receive messages or error codes?

  2. did you of recent changes on the system?

  You can read the following article and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  Black screen on startup

  Hope this information is useful.

• Error: "corrupted error reports are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer. »

  Original title: my computer was "rebuilt" with all the new parts June 2011. Logging on his shot and miss it may stay on or shut down and restart. I have this message when I turned on my pc this afternoon:

  Corrupted error report.

  Unfortunately, the error you report submitted is corrupted and cannot be analyzed. Reports "damaged errors are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer.

  When I turned on pc today is showed a blue screen and can something on a disc because the disc did not work properly?

  I paid for all the new parts for my computer and the computer technician has assured me that all the work was completed and correct. I bought the power supply (1) mother board, cards (2) 1 TB of memory. (2) hard drives 1 TB. (1) card reader and other elements appearing on my Computer Geek Bill.

  My music files are no longer mp3 but .oma. He/the Tech added its own files and records of music of World War II. These game. The drive D drive or slave who held my music, he said he wiped clean.

  I need to know these error reports will completely close my pc and all the information will be lost?

  Hi satindoll11233,
   
  I recommend you to disable the auto reboot system error (this option prevents Windows to reboot automatically if a Windows error to fail) of the startup options safe mode to know the exact error message or error code originally this problem.
   
  For more information, see:

  A description of the options to start in Windows XP Mode

• How to enter the bios and virtualization of hardware (or software) turn off? On Hp 3400 mt series

  I have HP 3400 MT SERIES

  motherboard: Foxconn 2ABF 1.20
  Version of the BIOS FRIEND brand: 7.14

  How to get into bios and disable (hardware or software (I don't know)) virtualization that I have to open mac osx 10.7 in vmware

  Enter the BIOS and look in the Security section, as shown in the image below. If that's what you see, then activate the virtualization technology and it's done. You will be able to use Sun's VirtualBox and other virtualization programs later

  

  Best regards

  ERICO

• In XP, error at startup 'Windows couldn't start. A recent hardware or software change might be the cause.

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.

  2. choose your language settings and thenk click 'next '.
  3. click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\system32\winload.exe

  State 0 xC0000001
  Info: The selected entry could not be loaded because the application is missing or damaged.

  But, instead of file: \Windows\system32\winload.exe I get file: \$Windows.~BT\windows\system32\winload.exe.
  

  Hi imranhussain1979,

  ·         You have made any changes recently?

  ·         When it was working fine?

  ·         You have Windows XP or a later version of Windows?

  Step 1: The error seems to refer to a later version of Windows. Restart the computer and check if the installed operating system.

  Step 2: Try to start the computer in safe mode and check the number.

  Start your computer in safe mode

  Microsoft Windows XP: start the computer in safe mode

   

  Respond with more information so we can help you best.