Re: Question about administrator rights

Similar Questions

• Satellite SM30-604: 4.25 SpeedFan and question about the right temperature?

  SpeedFan 4.25 is on my Toshiba Satellite SM30 604.
  Until recently, the CPU usage shown was variable.
  Compared to a low percentage (green dots) to somewhere around maximum, according to what I was doing (I have never game, but use purely professional things like Word, Excel, PowerPoint and many websites).

  Temperatures in most of the green time, the high 40-links, the low 50-links (I then scroll to the top of the Speed01 of the fan from 0 to 50% and 50%, it starts to run). I sometimes add an external fan, I work sometimes in very hot climates).
  I have the readings of the time 4.
  Local temperature: 49 c (with this temp color varies between a Green V and a red arrow pointing upwards).
  Temp distance: 85 (with a flame)
  HC0: 26 c (with a green (V)
  Temp1: 86 (with a red flame).

  WHAT ARE THE TEMPERATURES IMPORTANT? WHAT IS LOCAL TIME? TEMP DISTANCE AND TEMP1?

  These very high temperatures, I've had for a day. The fan is working (I hear it, I can feel. "I can see, because I partly dismantled the laptop.) But the Speed01 is 0%, and there is no reaction on the adjustment upward. Or playback is 100% without reaction to setting down. And rotating or disable "auto fan speed has no effect.
  And without any other program running, the CPU usage increased a few seconds after switching on to 100%. I do not notice a significant slow down in the speed of my applications when I start using them. And a virus today scan did not reveal all the important things.
  I can't activate my taskbar more.

  Who has some answers for me. Green in this area?

  Thank you

  Hello Han

  Your ad is very nice and very interesting, but you'll be very happy if someone can explain all this because you are using a non-Toshiba software. It is always recommended to use the original software because software Toshiba designed has been tested and it can just to protect the hardware components.

  Use of software from third party is always at your own risk, and if you have any problems or questions, please contact their own support. They have much more experience with your applications.

  I can just tell you that you should be careful where your laptop is placed and make sure that the device can take a deep breath and cool down properly.

  Good luck!

• Question about left right dragging between the articles

  (I'm new to Adobe DPS, so I apologize in advance if this question makes me look like a complete beginner)

  I'm working on a folio with two articles. I want the second article to be accessible only when the user clicks a button on a page which will link to the second article. I got the button functionality to work, but now no matter what the user is on the page, when they shift to the left the second article is displayed. Is there a way to avoid this?

  Also I build it in CS6 to work on a Tablet (a Samsung Galaxy), if that makes a difference.

  There is no way supported to block slide them between articles.

  Neil

• Questions about the right way to create a logon page?

  What is the best approach to take for the implementation of a portlet to logon to a WLP 10.3.2 Portal? A portlet of connection must be created in it's own book, and then once a user is logged on, the Portal main book would be displayed?
  
  Or should I put a login portlet it's own page then once a user is logged on, hide this page and the main page of the portal?
  
  I'm looking for the best approach.
  
  Thank you

  Hello
  Once a user is authenticated in my portal, how to assign a role to the user?
  1. given that the user is already there in the security, you can add this user to the role of testers immediately. Say, you create the user weblogic1. Add this user to the role of tester. So when it connects, it is automatically part of this role.

  By example, if I create a Portal administration Console TESTER role and determine that the authenticated user must belong to the TESTER role, how would assign the role to the user dynamically?
  NOW, dynamically if you don't know which user connects and if you want to add to the role of TESTER, you should do this using the API. With the help of API, you can get the list of all the roles he belongs to and if it's not part of the role of tester, add sound ID user to the role. All APIs are here. You will have this logic just after the authentication code. As you will have in Login pageflow connect action that performs the authentication. Then the next set of lines will be to add this user to the role.

  I'm confident, you can do so by the API. Just look for the API in the docs online. I not remember exact set of classes, but they are there. Do some research. I will share if I can find these APIs.
  http://download.Oracle.com/docs/CD/E13155_01/WLP/docs103/Javadoc/index.html?overview-summary.html

  http://download.Oracle.com/docs/CD/E13155_01/WLP/docs103/Javadoc/com/BEA/p13n/security/management/authentication/AtnManagerProxy.html
  http://download.Oracle.com/docs/CD/E13155_01/WLP/docs103/Javadoc/com/BEA/p13n/security/management/authentication/AtnSecurityMgmtHelper.html

  Thank you
  Ravi Jegga

• Question about the right way to implement the network connectivity.

  Hey guys -.

  I've read a few articles and the configuration of many times on this practice guide, but I can't seem to understand what the way ' own/best practices' to build the network aspect of the VMware host to the switch.  This environment is my lab environment, FYI.

  Can someone please shed some light on this.  I followed it - http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1004127

  My scenario is:

  -2 hosts ESXi 4.1 running

  -Each host is the same hardware

  -Each host has 2 network cards

  -Both connected to a single 3560 (although the 2 are available)

  -Each host connect to a San (running OpenFiler) on iSCSI

  -VLAN 5 is involved

  -The two hosts in vCenter in an environment non-clustered (for now)

  • So, each host must connect to the switch as a trunk or an access port?
  • If the sheath is the method, which is done tagging?  During the switch, or the vSwitch on each host?
  • How do you know when to choose between safe or not safe?
  • Must each host have 1 vSwitch for VMs and a vSwitch separated for the iSCSI connection?
  • Should the 2 network cards be associated to in VMware to the switch?  Or should they should be a channel of the switch port?  Or none of these options.

  I'm still a newb to the VMware line, so I'm really just practice a lot lately.  Any help is greatly appreciated.

  3. Yes, but some companies, like to give this control of security to the network instead of the VM team team. I would say just trunk, but I'm sure that there are borderline cases.

  4. Yes, I would be to separate traffic by giving iSCSI it's own NETWORK ports and also separate iSCSI traffic to its own network to the physical switch instead of just VLAN.

  You are welcome. Good luck!

• I'll try to find the right forum to ask questions about Outlook Express 6

  I'll try to find the right forum to ask questions about Outlook Express 6

  XP: Networking, Mail & onlinehttp://social.answers.microsoft.com/Forums/en-US/xpnetwork/threads Bruce Hagen MS - MVP [Mail]

• Dreamweaver is right for me? (also Question about Adobe courses)

  Hello!

  I am a student of five year

  who is eager to learn

  design of websites and animations.

  I already have Photoshop cs5

  but I want to learn more about the design of web sites.

  Dreamweaver is the correct program?

  I have also a question about Adobe courses (online)

  Will they go through and show you how to create websites

  with dreamweaver... Models, etc. like this stuff?
  All comments appreciated.

  Thank you

  CG

  I am rustic most qualified to answer this question, but I'll have a go at it. First of all, I admire your ambition!

  Dreamweaver is a great tool, but it will not necessarily learn you webdesign. Once you have an idea base of what happens in a website design, you'll really enjoy what DreamWeaver can do for you. I'll give you the same advice I was given when I wanted to first get into DreamWeaver and web design.

  I would really suggest some basic HTML and CSS books and use a text editor to create your first pages. Once you start to undersatnd that you do, then by all means, get a DreamWeaver training. Everyone has their own favourite titles to learn the basics, so I'll just say this is a suggestion and has helped me to start. The first head of series has been clearly written, has a good sense of humor, and helped me to get the basics. Check your libraries, shops of second hand books or other resale stores. I know you mentioned the Adobe online, but I have also used and as, Adobe Classroom in a Book series. Once I learned a particular version, I found the Missing Manual good for cutting-edge issues series and going to a new version.

  Don't be discouraged, stick with it and don't be afarid to try another book, if you don't like what I suggested. We all learn differently and what has worked for me may not work for you!

• error message administrator rights are required to run this tool

  I am trying to install a HPUSB.exe program to fix my USB.  It is a program of Hewlett-Packard.  However, when I try to run the program - I get the error msg: permission denied.  Administrator rights are required to run this tool.

  I am the administrator... and it wont let me run the program. Why?

  Thank you

  Tammy

  Try the click with the right button on the program, and then click Run as administrator.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• How to deepen the administrator rights on the computer?

  Original title: a little URGENT please - Windows 8 lost administrator rights

  Here's the question.

  I have an Asus all in one type of windows desktop PC 8. I improved this standard to professional.
  There is a local user account, who somehow lost administration rights. This is obviously a problem, because I can not access several functions of the computer, including a critical application of the work.
  There is no other user accounts on the pc to connect to the standard administrator account that I suppose is disable by default? As I don't see it.
  After some googling, I tried a few methods to solve this, nothing helps. It seems im in a catch 22, as to solve the problem of having admin rights, I need to have administrator rights to perform the majority of bugs!
  Tried to start the safe mode, to re - activate administrator privileges by pressing F8 or SHIFT F8
  -no effect - pc just started normally
  Tried to activate the account administrator "cmd".
  -This must be done by run cmd as administrator, which I'm not currently!
  Tried to add mode without fail to the startup list
  -Need to be administrator to do!
  I don't see any method to restore or recover to previous point
  Impossible to reinstall windows as it came pre-installed with windows. I was about to add the computer to a domain so that I could make a clean image before this problem occurred
  Uh, I forgot what I tried now. pulling my hair out over this. Seems nothing more I need to do, I have access to an administrator account to run needs. If I could get in safe mode somehow that seems like it would allow me to solve this problem, but I can't get into that any means.
  Help, please! It is a working pc and the only app that gets used, requires administrator privileges to run. If his critics I solve this problem
  Thank you!
  Hi, I know I'm a little late to the party, but I found this post faced a similar problem and thought that post my findings.
  I found a work around for this problem, which does not require a reinstall of Windows, but you may lose your user account.
  Summary:
  The problem is that in Windows 8, the administrator is inactive by default, you will have to find a way to activate it. You can activate the admin as an admin account, however. Fortunately, (on my machine anyway) it seems that you can access your hidden from the Safemode administrator account. If your first set of objectives will be as follows:
  -starting in safe mode
  -Log in as an administrator
  -l' administrator, enable the account administrator similarly.
  -Restart your machine and you as an administrator outside of safe mode (normal mode).
  From here, you should be free to do what you want. Now that the admin account is active, you are allowed to type a password when prompted (by default that the password is empty). For me, however, when I tried to promote my previous user administrator account (among other things) I noticed symptoms that seem to indicate that the account ceased to exist. I went through measures to set up a new account and get it synced with my microsoft email account.
  -Create a new user account
  -give administrator rights
  -remove my old (for some reason, hidden) account
  -Sync to the top of my new user account with microsoft e-mail account.
  Directions for use:
  How to get admin access:
  (1.) start in safe mode. You can make it easier by opening a command prompt (Start menu-> type "cmd"). And type "shutdown/r/o".
  2.), your computer begins to restart, but give you a set of troubleshooting options. Choose troubleshooting->-> start of the Advanced Options settings.
  3.) after reboot and enter safe mode, users of contactor by going to the start menu-> click on your user name-> and choose administrator.
  4.) Windows will begin the first initialization for this account.
  5.) once connected, open the command prompt, this time as a Director. (Make a right click-> Run as administrator).
  6.) type "net user administrator / Active: Yes" to set the admin account as 'active'. It will now be shown outside of safe mode.
  7.) restart your computer and log in as administrator again. You can now add users and to play with the permissions etc. (metro options are not available in safe mode, where the reset).
  How to remove your old account of 'lost' and synchronize your new account with the microsoft account.
  1.) create a new account via the control panel users. Don't forget to give you administrator rights.
  (2.) to remove your lost old account by typing "net use /del" in an administrator command prompt. You need to know your old account name, good luck with this one.
  3.) go into the settings of your pc: open the context menu on the right-> settings-> "change PC settings."
  (4.) to go to the users-> Select 'switch to a Microsoft account» tab
  I hope this helps!

• Administrator rights for CP9

  Hi all.  Our friendly staff of the TI, for security reasons, have removed us the rights administrator on our PC.  Because Captivate requires administrator rights to work properly, they have somehow allowed admin for Captivate only rights.  If the application runs successfully, except the help - updates option is grayed out and unavailable.  So I can't run Adobe Application Manager (or whatever it's called) and have no idea when one of Adobe applications, I installed (I have the e-Learning Suite) are updated.  So my question is, how can I be made aware of updates to the Adobe software?  I have check the Adobe Captivate Blog everyday and keep an eye on this Forum Captivate.  Is there another source of update notice?

  Does not not even mentioning if there is an update, can I install it is more - I need to get the COMPUTER staff to do.  It's a crazy finish reaction in my opinion, but my opinion is not enough.

  Thanks for your suggestions.

  I always try to talk about newly released patches everywhere... but important fixes are going to be spoken on the blog of Captivate I trust.

• Questions about the implementation of clusters of storage and DTS on active cluster

  I have a few questions about the implementation of clusters of data store and SRS storage in VSphere 5.1.

  We have a data center with about 15 HP blades and a few servers non-lame.  The hosts are all either VSphere 5.0 or 5.1.  Our back-end storage is an EMC VNX 5700 with about 20 stores of data.  All the VMWare is managed by VCenter 5.1 running on a dedicated physical machine.

  Currently, each data store is used individually; No piles of data store are put in place.  When a new virtual machine is created, the administrator usually chooses the data with the most space store.  Periodically, we will go back and manually storage vMotion machines to balance the load.

  Recently, we have expanded the VNX storage, so we now have LUNS in different pools, with different levels of performance.

  What I would do is set up for the data store clusters, so that us when a virtual machine is created, the administrator must not know what data store is in which pool.  Also take advantage of the DRS storage so that the burden of storage will be "refine" himself a little.

  I know the setting up of a cluster of storage in a 'clean' environment is quite simple, but my concern is creation/conversion data warehouses existing in active production in the cluster, while they are used.

  If I access the screen "data warehouses and store data from clusters ', right-click on the data center and create a cluster, and then move the various data stores in the new cluster, will there be an interruption in the production running systems?

  I also wonder about activation of storage i/o control.  It is not currently enabled on data warehouses.  I know it's useful for the StorageDRS, but will be allowing any negative impact on the system?  If I turn on the warehouses of data, is there anything else I should do or set in addition to all that allows him?

  Finally, we are in the process of Site Recovery Manager configuration.  SRS has an impact on the configuration of the data clusters and DTS store?

  Thanks in advance for your comments.

  Mike O.

  Gregg Robertson wrote:

  Hello

  Clusters of data and using DTS store doesn't impact RS even if you create a cluster of data store for storage of replicated data and another for everyone else, this way you machines virtual you want to replicate are not moved on warehouses of data that are not replicated , but will still have the ability to move if there is a conflict.

  Gregg

  With all due respect but SRM and DTS don't go together. SRM does not at all support the use of DTS. So if you are configuring SRM forget DTS for now.

  Reason for this is that SRM knows no DTS and VMs can be in flight when a failover should occur, and bad things can happen. Also, the protection breaks when a virtual computer is moved between data warehouses in a cluster data store.

  In short: don't go there.

• Questions about MRI

  Hi all
  
  My client asked me a few questions about MRI with ecm11g, I can't find the doc online answers, could someone tell me the answer?
  1. what kind of documents can be sealed by MRI, ms office should be able to be sealed, anyway, when I right click on a file .cmd or .rar in windows Resource Manager, there is no seal on in the option list
  2. is there a way to map IRM rights with model of account group/ECM ACL / security?
  3. text search full ECM can a doc sealed (for example: a word sealed) which is stored in ecm?
  
  Best regards

  I don't think that there is no configuration necessary.

  Just checked in 10g (Complutense University of MADRID and MRI):
  -There is a component called IRMIntegration
  -in the section of the Administration there is a menu item that allows configuration of base between the AAU and MRI (URL, port, etc) and it also contains an indicator "Index sealed Documents" - I think that it is the little thing that does not work in your system
  -When an element is integrated, it can be assigned to a metadata field called Protection MRI, which is filled with all the contexts in which a current 'seal' user allowed to (I assume that you do not see this area in your system)

  A context to this field of filling causes an item to be sealed. My system is a little slow, so I knew when the item was GENWWW, it was even made public. Once this was done, it was already sealed (and so was his web viewable format - spdf).

  I'll also take a look if the component is available in the 11g environment.

  As I expected: the component is not available in the 11g environment

  Edited by: jiri.machotka may 3, 2011 04:58

• A question about the license of Oracle 1 g R2 Enterprise Edition

  Hi all
  
  
  I have a question about Oracle license and I would be grateful if you could help me thanks.
  
  I installed an Oracle (11g R2 Enterprise edition) server on a virtual linux machine. The pc being used for this purpose
  is my cell phone company (so a professional and not a personal computer). However, I use this Oracle Server
  only for the purpose, i.e. learning only to run the examples in my Oracle Press books (SQL, PL/SQL and some)
  administrative tasks) just to learn things.
  
  There is absolutely no data related to my business, stored or used on this server. Whenever I want to work with my
  data of the company, I use the Oracle server of the company that has the appropriate license of course. So, as I said, I
  Use this server of the company on the virtual machine only to run applications/programs in my Oracle Press books just for
  learning and I'm the only person who uses this server (no remote for other users).
  
  The reason why I needed to install this server on my PC, is that our DBA could not provide a training environment
  for me, with all the privileges and features.
  
  
  Should I buy a license for this Enterprise Server installed on my virtual machine?
  
  
  Thanks in advance,
  Dariyoosh

  The OTN license agreement:

  >
  LICENSE RIGHTS
  We grant an exclusive, non-transferable, limited license to use the programs only for the purpose of developing, testing, prototyping and demonstrating your application and not for other purposes. If you use the application you develop in this licence for any internal or for any commercial or purposes data processing production, or you want to use the programs for purposes other that those permitted under this agreement, you must get a production version of the program by contacting us or a reseller of Oracle to obtain the appropriate license. You acknowledge that we may not produce a production version of the programme and the development efforts undertaken by you at your own risk. We can check your use of the programs. Program documentation, if any, may be consulted online at http://otn.oracle.com/docs.

  Ownership and Restrictions all retain us the property and rights of intellectual property in the programs. Programs can be installed on a single computer only and worn by one person in the operating environment identified by us. You can make a copy of the program for backup purposes.

  You can not:
  -Use programs for your own internal data processing or for commercial or production purposes, or programs for any purpose except the development of your application.
  -use the applications you develop with programs for any internal data processing or commercial or production without obtaining an adequate license from us;
  -continue to develop your application after using for any treatment data internal, commercial or production end without obtaining an adequate license from us, or Oracle reseller;
  -remove or change any brand of program or a statement of property rights;
  -put the programs available in any manner to a third party;
  -Use programs to provide a third of training;
  -assign this contract or give or transfer the programs or interest to them to another person or entity; -cause or permit engineering reverse (unless required by law for interoperability), disassembly or decompilation of the programs;
  -disclose the results of benchmark tests of any program without our prior written consent.

• FAQ (27): the SDM requires administrator rights to run?

  When I launch SDM, it happens with this dialog box. Is this normal?

  

  Yes. SDM requires administrator rights because it requires the appropriate rights to update or apply SoftPaq updates to your computer.

  The above message appears only if UAC (User Access Control) is turned on and that the user doesn't have administrator rights. For more information about UAC, please visit this link: http://en.wikipedia.org/wiki/User_Account_Control

  UNFORTUNATELY, the SDM version 3.5.0.0 (later from this post) has a problem where it wrong will not recognize the user as administrator if UAC is enabled.

  If you have the SDM version 3.5.0.0, have active UAC and you are logged on under an account that has administrator rights and SDM displays the dialog box above, please note that this is a bug found ONLY in the SDM 3.5.0.0 version and will be fixed with the next version.
  
  In the meantime, there are two solutions we can suggest you to work around this problem:

  (1) Although not recommended, you can disable UAC and reboot for the changes to take effect. We do not recommend this approach because UAC protects the computer against attacks. We include this option only for purposes of completeness.

  2) RECOMMENDED WORKAROUND: Force MDS to start with administrator right.  To do this, please follow these steps to work around the problem, until a new version of SDM is available:

  1. Open Windows Explorer.
  2. Go to C:\Program Files (x 86) \Hewlett-Packard\HP SoftPaq Download Manager. Note: If you have a 32-bit operating system, navigate to C:\Program Hewlett-Packard HP SoftPaq Download Manager.
  3. Right click on the file "SoftPaqDownloadManager.exe".
  4. Select "Run as Administrator" from the context menu.

  

• Many questions about the HP 50 g

  I just ordered a HP 50 g graphic calculator! I have a few questions about this so hang on tight! What is the USB connector on the calculator? Mini-USB, micro USB, or is it a connector owner, "custom". Then, it would be possible to connect a keyboard to the HP 50 g by using the USB Port? Is there a program that would make this possible? (I doubt it would work if you plug it..) I have a Mini-USB to female USB 2.0 connector. So I could just plug the keyboard right, provided that the port on the calculator is a Mini-USB Port. If this is not so that I could use my female to female USB adaptor to connect the keyboard.

  Thanks for your help,

  Zekelegge

  Hi!, zekelegge:

  Welcome to Forum!

  The only printer I use, 50G calculators, 48GII, 39GS and 17BII +, as well as many former models, such as the 48 s/SX/G/G + / GX, 38 G, 39 G, 42, 41 C/CV/CX and 28 C/S, is the infrared printer HP 82240 b. If you can use the emulator HP50G, on the PC, the simulator of the printer, you can download, since... http://www.HPCalc.org/details.php?id=7386

  The printer... HP 82240 B

  

  The cable series...

  

  The description... http://www.allenwan.com/hpcalcserialcable/

  The original cable...