M7-n109dx envy: touchpad is supposed to be located further down in the lower left corner? Not rinse.

Similar Questions

• Professional Windows Vista using in a HP tablet PC, the pointer of the mouse escapes very often moves to the top left corner of the screen. I'm only using the touchpad.

  The cursor moves to the left corner (on top of the trash) several times when I'm working on the computer. This work is to find Web sites and using the office 2003 programs. No games or watch video.  What can I do to fix this?

  Hello

  Control Panel - mouse, TouchPad controls are there and you may also have a TouchPad icon in the
  Taskbar near the clock in the bottom right. Also there are probably shortcut keys that can affect the TouchPad so
  see the Forums and the Support from the manufacturer of your system.

  The sensitivity of the TouchPad, special areas or any function of the snap and other parameters can play a role.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Envy 15 t-ae100: light of 15 t-ae100 HP Envy toward the lower right corner of the keyboard

  I just bought a new Envy 15 t-ae100. I see just off the sticker of Intel Core i7, it's a thin slot which has a cover on it. It is the form of a USB port, even if it is a big plus. So far, no light has never shown through it.

  Exactly what is it? If I see a light, is this bad news? My CPU is overheating? Or is it nothing more than a fancy décor?

  
  HP LaserJet p1102w

  Hello

  Are you referring to in the light of the fingerprint scanner - see Page 16 of your Service and maintenance Guide.

  Kind regards

  DP - K

• Where is the "Firefox" printed logo which is supposed to appear in the upper left corner of the page?

  When Microsoft installed Firefox on my computer there was a small, orange, with "Firefox" logo printed in it in the upper left corner of the page. He went, and the guests of teaching direct use me to go. How can I get it back?

  Thanks Matt. Another person told me how to remove the menu bar and BAM he was there, someone else says to press F11 and it works also. As I told them, I am 62 yr.s old, has not been raised with these wonderful machines, but I'm slowly learning. Thanks again!

• I have a g6-1c57dx. Double hit the upper left corner of the touchpad to turn off. Did not work.

  Windows 7 32 bit.  Any suggestions?  Thank you

  Hello

  First, download the Setup driver Synaptics following on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp53501-54000/sp53873.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  Once done, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  Once done, restart the laptop.

  Kind regards

  DP - K

• Touchpad does not work on my HP Probook s 4525, the yellow light in the left corner is on?

  I have a new HP Probook s 4525 and suddenly, my touchpad does not work as a yellow light in the upper left shows.  Please let me know how I can solve this problem.

  double valve led yellow in the upper left corner of the touch pad. The yellow light is an indicator off status
  This should enable the touchpad.

  Best regards
  ERICO

• I worked on a large document for several years and all of a sudden I can't scroll to the bottom of the screen with my two fingers on the touchpad, well that I have no problem scrolling to the bottom of this page to search for similar issues.

  I worked on a large document for several years and all of a sudden I can't scroll to the bottom of the screen with my two fingers on the touchpad, well that I have no problem scrolling to the bottom of this page to search for similar issues. I can navigate only to go up and down with the arrow keys.

  What version of Pages is running on your MBP?

  What version of Mac OS X is running on your MBP?

  The MBP is not iOS running.

• Touchpad does not scroll and the lower bar disappears on Satellite Pro L

  Hi, as I said just on the laptop as usual, but for some reason now the Touchpad will not Parade (but work the touch to click). And the lower bar disappears only when I'm on the internet chrome (chrome on his party, but still there on internet explore, but who wants to use the Explorer! lol).

  It makes it so difficult to click between the research and writing! It is still there as it should be on doc word, excel etc.

  Little things, but super boring and I don't understand why change, or how they're connected. Hold fixed, its so stupid he would change just on me.

  Any help is very appreciated!
  Thank you, Jenna

  Hello

  The touchpad settings can be changed in Control Panel-> mouse
  Here, you will have to go to the last tab advanced and click on the Advanced button.

  You should now get a menu with all the options available for touchpad.
  It should be an option called use scroll function. This should be checked/enabled.

  Check it!

• HP Envy 17 t: what size usb drive is necessary for the recovery of HP Envy 17 t 10 (64-bit) Windows?

  I just installed my HP Envy and wanted to set up a recovery disk.  The USB key must be less than 32gigs, but the example has not been updated for Windows 10 the instructions say.  It shows a recovery screen for a laptop of Win8 with the source of recovery like 17 concerts.   Is there a way to check the requirements for the front to accept the HP one time recovery option.  I have a new 16 GB USB key and wanted to make sure that it is large enough.

  Also do a backup image to DVD?   If so, how many DVDs?   The laptop is new and I added only Chrome and some minor programs.  My data files are always on an external hard drive.

  Hello

  Thanks for posting in the Forum from HP Support.

  To be honest, I don't know what size will be that these recovery files are because they can vary from the version of Windows to another. They can vary from a model.

  In my opinion, 16 GB is probably not enough.

  DVDs are usually 6 (6x4.7 GB = about 28 GB) but this can vary from one model.

  This possibility of imbedding maybe once, there are other ways that you can save your system indefinitely.

  This is a free option included in all windows (creating system image, it's free as included in Vista from the outset).

  http://support.HP.com/us-en/document/c03544793

  However, this option requires (e.g. USB HDD) external HARD disk or DVD. It does not work with USB flash drives.

• HP Envy H8-1549: computer doesn't recognize only half of the new Ram

  Hi all.

  I took a set of ram Ripjaws X 32 gig (4 x 8).  When I install all four chips, only half of them are recognized by the Bios. If I remove two, both of which have not been recognized are visible and working in the same locations they were. It all works, but not all.

  Current configuration: http://support.hp.com/us-en/document/c03666767

  RAM: http://www.newegg.com/Product/Product.aspx?Item=N82E16820231569

  Everything I read on my motherboard and ram has indicated that it is compatible. I updated the Bios and erased the CMS.  I'm a bit of a loss. Am I missing something fundamental?

  What is a tension problem? If so, how can I send it?

  RAM is usually such an easy upgrade. Not so much this time, it seems to me.

  Thank you.

  This seller has guaranteed 8 GB modules for the H8-1549 envy.  The specs are "CL11.

• HP Envy M6 1125dx running Windows 8.1 and my fingerprint reader/single pass does not work

  Hello

  I'm not able to use my finger print reader/single pass, now that I've downloaded windows 8.1

  Read a few other questions and difficulties people exercise but were not able to always operate.

  I have a HP Envy M6 1125dx

  00179 60246-20486-AA0EM

  64-bit Intel Core i5

  Running Windows 8.1

  Thank you

  Hi Ricksd,

  Welcome to the HP Forum.

  If you still have an old driver Validity Sensor in your system, you may need to upgrade to one that supports 8.1:

  sp58869 validity sensor V4.4.234.0 Win8

  If you still use an older version of the HP SimplePass software, you may need to upgrade the program.

  If you have recently upgraded to 8.1 Windows, make sure that all of your Windows updates are up-to-date.

  If everything is already at the level of the correct version, then you can get away with just reset the drivers:

  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the Hard Reset for your laptop
  • Start the computer and connect

  If the Hard Reset does not help,

  so check out this guide for advice on how to relax program in order:

  Simple Instructions for upgrade HP SimplePass

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

  Dragon Tip: Export your SimplePass Webcards!

• Touchpad left click not working on Satellite L650

  Hello

  I have a problem with my touchpad and I tried everything I would be gratefull if someone here has helped me...

  My problem is that I can't with my touchpad left click, the button does not nor does tying tape, while the right button works.

  I have Internet when suddenly it failling starte and dragging everything I clicked, and then it just stoped working.

  Also, I went into the left-handed touchpad mouse and dial-up options, and when I click with the left button right button works, but then the right click (it is now on the left) does not work nor done typing.

  This means that the material of touchpad (touchpad buttons) are ok.
  You should check if new installation of the software/driver touchpad help you get rid of this annoying problem.

  In Device Manager, you must first remove the touchpad device. Restart the computer and then install the touchpad driver once more.

• My ENVY 17-j092nr Notebook PC flicks or vibrates randomly on the log screen Windows and other software

  Im a pc user ENVY 17-j092nr Notebook PC (windows 8.1 with all the drivers) and the OS updates works very well, however sometimes im getting an annoying error that allows windows vibrates like crazy, the problem is a little weird to explain, it makes the BAR on explorer.exe folder flick and other executives 'content' of several software Firefox for example the top bar which is orange starts helpeless flick, or in vlc, it even move, and then the worst on the windows log screen, which makes my movies quick photo from the left to the centre several times per second, making it impossible to write any Password and its annoying when especilly simple pass off work (problem happens very often, but I'm not complaining here).

  The thing I've tried:

  -Change of mouse and video installation, screen, mouse and other dirvers in addition to their update.

  -With the help of build of Windows and external software trouble and repair ultilities.

  Updtading - OS (why? dk but I tried alternatives).

  -Electricity disconnection when this occurs (as sugested in other forums), did not work.

  -Clean the fan and avoiding any external particle on the laser mouse.

  Well well, not that im complaining about the laptop, which work very well over a budget, like it, it's just that the error which bug my HP to be good (if not perfect) experience, please someone help on this im looking forward to HP service work to help me fix this problem for good, is really annoying, especially when you try logging thx.

  I'm not Dunidar thank you for you time to grow another, I opened the cover of portable and yes I found a few in there, dead ants cleaned that upward I don't mind much about warranty or anything like that in any case thank you for your attention, you did a wonderful job help here , the problem has not demonstrated again the science I did it this morning so I think the ants where to do this kind of electric bridge I guess I DK much to this topic but, once again, thx for you excellent support cheers.

• HP ENVY x 360-15-w100nt: wi - fi connection slows down when the charger is not plugged

  Hello

  My wi - fi connection slows down when the charger is not plugged in. Correct the wireless lan drivers. So far, I appreciate all kinds of advice for this problem.

  Thanks in advance

  Hello @JohannNewma,

  Welcome to the HP support community! I read your post and wanted to tender hand can help you!

  I understand that you notice a decrease in speed wireless on the x 360-15-w100nt laptop computer ENVY when running off the battery voltage.

  You can check and adjust the power options on the system as it is probably trying to save battery power by reducing wireless performance.

  If you're still having problems, you can follow the steps described in this document to troubleshoot the network settings and internet wireless.

  Please get back to me how that happens. To show that you like, or are grateful for my post, please click the Thumbs up below.

  Thank you!

• The screen of my computer no longer turns. It is supposed to run it any way, I flip the screen, I can not understand how to solve this problem

  The screen of my computer no longer turns. It is supposed to run it any way, I flip the screen, I can not understand how to solve this problem. I guess a child (best case scenario) or my husband (worst case) have been involved in this. But it drives me crazy. Any ideas on how to get that back in action?

  Hello

  What is the brand and model of the computer?

  Were there recent changes made on the computer before the show?

  This issue could be due to corrupted graphics cards drivers. I suggest you to update the latest version of the drivers of graphics from the manufacturer's Web site and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-8/get-best-display-monitor

  Thank you.