Mac drivers

Similar Questions

• Mac drivers for designjet 5500ps 60 inches?

  Does anyone have ideas how I can get the drivers for mac os x for printer tis?  All said HP is part of mac os x.  they can't get it at hp at all. I have a macbook pro running 10.9, but it has been suggested that I try an older driver (10.7) but I can't seem to be able to find it anywhere

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=82228&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4114%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Smartphones Pocketmac blackBerry unavailable - unable to download for Mac drivers

  Hello

  I read the bulletins regarding the download of the "driver update" for the PocketMac so it only opens after the installation (as is the case with mine... I tried install and uninstall then reinstall several times...)... but this "driver update" no longer exists on the blackberry download site. The only available drivers are for other languages (Italian, Spanish, Dutch, etc.)... I'm so frustrated! I want just to sync my new Blackberry curve with my ibook ol ' faithful!

  Any help would be much appreciated!

  Best,

  MI @.

  It's the place I know to get them.

  Sorry it does not work for you. May I suggest to solve this thread,.

  and display on the Blackberry for Mac forums page? I'm sure that someone out there

  you have your answer.

  Thank you

• Where can I find print double-sided for Photosmart D110 for mac drivers?

  I downloaded this driver for my MBP and I am able to print double-sided on this computer. But now that I bought an iMac, and I tried to find this driver, I can't find anywhere. I think I downloaded a driver for my MBP. I know that I have to manually place the trials for this function works. I do not want to print all sides then equalises and sort them. It's a little too. Any help would be greatly appreciated! Thank you very much!!!

  Hello
  The two-Sided feature reffer automatic two sided printing.
  As the specific device provide printing manual duplex only, you can perform duplexing manual as follows:

  In general, in order to perform manual duplexing, Joanie you use the Pages to the printer setting, as you can find below:
  http://support.HP.com/us-en/document/c01663233

  You can also use the HP two-sided printing software to get a more visual experience for double-sided printing:
  http://FTP.HP.com/pub/softlib/software12/COL35975/MP-88750-2/HP_Two-sided_Printing.dmg

  You can access this tool by clicking the PDF button at the bottom of the print dialog box, and then select double-sided printing and follow the on-screen instructions.

  Kind regards
  Shlomi

• Ricoh printers does not work with Mac?

  I just bought printer Ricoh SP110/111 at my home. But there is no mac driver on the cd inserted in the area also on their site web they do not have the mac drivers. It's really funny. In 2016, has none of the Ricoh printer Mac drivers.

  Does anyone know how to get a print with Ricoh SP111 via Mac?

  Thank you

  Berke

  You have downloaded and installed this.

  RICOH v3.0 for OS X printer drivers

• Fujitsu FI-6110 software driver for mac?

  Hello

  Can someone tell where I can download a free driver for scanner fujitsu fi-6110?

  Fujitsu do not provide a version compatible mac for this model.

  Thank you very much

  James

  of course, Mr. James, I can help... Let me see... Yes, it doesn't have the Mac drivers, so I would say VueScan by Hamrick software, not free, but it seems to be your best optiion now

  Good luck

  John B

• EPC2203 modem cannot connect to the Mac via USB?

  I searched all threads and you can't find something to solve my problem.

  My ISP sold me the modem Scientific Atlanta EPC2203 cable recently. I can't connect it to my Mac (10.5.7) via ethernet no problem at all. But I can't get a connection via a USB port. The modem operating manual mentions for Mac OS X USB connectivity, but does mention all the details on how to establish the connection: we talk about the installation of PC drivers. Supplied with the modem installation CD only applies to the PC, it seems that I have to take extra steps such as installing a Mac driver? I couldn't find the Mac drivers adapted on internet, then I start to think that this modem is not simply done to connect to the Mac via USB?

  Any help is very appreciated.

  To make your Modem work with USB connectivity, you must install the Modem drivers on your computer. You can try to search for the Drivers that works on the MAC computer or else you can contact the support Tech Atlanta, because they can let you know where you can find the drivers for your Modem. Or well you googled around and you can find the drivers for your Modem which are Compitable MAC.

• LaserJet P1102w: Laserjet P1102w too slow with MAC OS x and Android

  Hello

  I use the P1102w via WI - Fi for a few months.

  I find it very effective use of Windows.

  BUT it's amazing slowly by any other OS.

  And I use 99% MAC OSX (El capitan).

  Perhaps because there is not a specific driver for MAC? Only the OS Win has a specific program/driver which works very well

  With my MAC OSX (no specific diver HP for MAC OSX on the HP site, instruction to use the MAC drivers) when I send a spool the P1102w printing, it can take 10/05/30 minutes to print a few pages (4).

  Even from between the 1st and the second page printing, it can take some minutes!

  I tried the size and format of different files.

  But even with the small file (less then 1 MB), it's the same result.

  OS Android, it's the same effect. You send the print job, and we must wait and hope that it will work.

  HOPE, because often the print job does not complete successfully.

  BUT the same file of Windows (since a slower PC, my MAC laptop has a better material and performance) has no problem printing and it is sent to the printer in a few seconds.

  Thanks for any suggestion to make MAC & Android printing faster (at least at a speed of accetable, because more than 10 min then for a small print job is not acceptable).

  Hello @Ric_,.

• C6380 print wirelessly on Mac

  I recently bought a C6380 and I can't get to print wireless.  I use the latest Mac drivers (10.1) which seems to be more recent than the software by download from the HP support site.

  I use a Netgear 834 G router with WPA encryption. There is a DHCP reservation for the printer and the printer's wireless signals the strength of wi - fi is excellent.

  I can connect to the printer via the web interface and also he ping from the command prompt

  I can scan the Mac using the HP software to PDF, Image or OCR.

  I can search the ink levels from the HP software

  but when I print, it says "Connection", then he said: it's "transfer of data to the printer" and finally he loses just connection.  Meanwhile, the printer does nothing.  If you look at the web interface, while he is supposed to be transfer data, the interface shows just ready...

  I tried to reset print Mac OSX and add the printer again.

  I tried to uninstall the HP software and drivers, restart and then put it back.  There is no update available.

  Any ideas?

  Remove the printer again, then click on the '+' to add back.

  You will see first he showed a 'Hello' link, but wait a bit and it appears also as a network connection.  Add this way.

  If this does not work, you are looking to replace the router.  A Google search reveals that very few people are using this router with the Mac Leoaprd, or use at all besides.  Seems that it was mainly distributed to subscribers of an ISP called Sky.

  Models of router most commonly used are often updated firmware available to ensure ongoing compatibility with changes to the operating system.  Unusual models as it would not get these updates.

• Wireless configuration of HP C4780 with new router and Mac (wireless network not found)

  About 10 months ago, I bought a new router. I already had several problems connecting my HP C4780 to my old router, and after setting up the new router, I was totally unable to connect the printer wireless to my router.

  I have reset the system to the printer on my Mac, I have reset the settings on my printer wireless, I downloaded the latest HP software, I've uninstalled and reinstalled the HP software several times and I have had no success. When running through the Setup Wizard, I was able to select the printer and method (wireless network set up by USB) before plugging the USB key. After that, the Setup Wizard says "Device not connected" (DUH!) and the screen select network said simply "no discovery goes Wi - Fi network." I ran the print to the printer from the Network Configuration, and he identified 15 networks (mine included). So, it seems that the Wi - Fi receiver on the printer still works...

  Any suggestions?

  P.S. This printer has been nothing trouble since I got it, and I wouldn't recommend it to ANYONE (I like actually...).

  After attempting to run the installer on my boot camp Windows 7 Ultimate version, I fell at last on an obscure statement in the configuration of the PC software for the c4780. It says to connect the computer to the router using the router WPS button.

  I have reset the configuration on the printer and turned off wireless the wireless, then I pushed the the router WPS button until the blue WiFi light on the c4780 lit. THIS SEEMED to BE THE KEY STEPS to CONNECT THE c4780 to MY ROUTER.

  After that, the configuration and setting up the printer on my Mac using the system of preferences was a piece of cake. Functions of the printer and the scanner work with Mac drivers.

  Problem solved... For now... This printer is so buggy, I have no doubt I'll have similar problems in the future.

• Adobe first/Media Encoder CC Crash when exporting video for ~ 25 min (Mac)

  Specifications of the laptop:

  OS X Version of El Capitan 10.11.4

  2.5 GHz Intel Core i7 processor

  16 GB memory

  Iris Pro 1536 Intel graphics card

  Problem:

  Adobe Premiere and Media Encoder CC constantly crash when I try to export the sequence of a project which is roughly ~ 25 minutes in length, H.264.

  The effects are used throughout the project, but only the base dissolves and black-and-white/contrast effects. Images comes from several sources, but all of the same mp4 file and type frame rates. There are also several PNG files in the Assembly, including the one I used to "frame" the movie to make it look more like images from other sources. Yet once, nothing complicated, not even a long dissolve (dissolved all is literally 2/24 frames in length).

  Split the video into sections and exporting separately are no problem, even when comparing a relatively short section of 4 minutes for a much bigger and more focused on the effects of section 11 minutes. Needless to say, I really, really, really prefer does not export this video into sections. The intended destination is youtube, and I just want everything in an own mp4, not two 12-minute videos.

  After some digging, I found similar problems reported on these and others and was especially deplore the possibility that my power supply is not large enough to cope, but it's still very confused. My MacBook is not 'stop', and as far as I could see, the Iris Intel Pro should have been sufficient even without a graph 5100 graphics adapter Pro 5200 or; as in the past I've already exported MUCH larger files, ranging from 35 to 85 minutes.

  solved by downloading latest driver for Nvidia CUDA for Mac - really just a problem with the Mercury playback engine. Guess OpenCL was not simply cut to get the type of work I was doing.

  Here is a convenient link to the latest CUDA for Mac drivers for all who encounter similar problems with export in Adobe Premiere Pro Media Encoder CC or CC: drivers CUDA for MAC Archive | NVIDIA

• Mac user: First Pro CC 2015 "can't find compatible video display modules" at startup?

  Premiere Pro CC 2015 "can't find compatible video display modules" at startup? I'm on a 27 "iMac, end of 2013, OS X 10.11.3, NVIDIA GeForce GTX 780 M 4096 MB. More info in the forum seems to deal with Windows solutions to this problem. Can someone help a Mac user? Thank you!

  Hi Douglask,

  Premiere Pro CC 2015 "can't find compatible video display modules" at startup? I'm on a 27 "iMac, end of 2013, OS X 10.11.3, NVIDIA GeForce GTX 780 M 4096 MB. More info in the forum seems to deal with Windows solutions to this problem. Can someone help a Mac user? Thank you!

  Please check, if you provision for video drivers:

  CUDA for MAC drivers Archive | NVIDIA

  Try this:

  Go to the following locations:

  1 location: In the Finder, click go > go to folder > ~/Library/Application Support/Adobe

  Situation 2: Go > go to folder > ~/Library/Preferences/Adobe

  Location 3: Documents > Adobe

  Everywhere, rename the folders 'Adobe' to 'OldAdobe '.

  Launch the first, accept the license agreement and see if it works.

  Note: You will lose your customized workspaces and keyboard shortcuts.

  Thank you

  Ilyes Singh

• keyboard does not

  Boot Camp - keyboard and touchpad does not not in Windows 7 Pro

  I installed Windows 7 Pro 4 bits with Boot camp. (I use Yosemite on MacBook Air 13 "early 2014 model)

  After the restart in Windows, the first time, the touch keyboard and the railway does not. So I can't do the extra configuration of windows. (after the language selection and keyboard)  And so cannot run the Setup program for the Mac drivers.

  My MacBook Air has been bought to the Japan so the keyboard is different from the US I tried to specify keyboard such as the Japan and the United States, the results are the same - key keyboard and the railway does not.

  Would appreciate any sharing of experiences.

  Thanks in advance!

  Simon

  If you use a USB Installer, have you followed the steps in installing Windows 7 and previous versions on your Mac with Boot Camp - Apple Support . Specifically, look at step 11.

• Captian El OSX with Konica-Minolta bizhub C454e does not print when codes active accountants

  Hello
  I am trying to solve a problem with 2 MacBook Pro running El Capitan trying to print to a Minolta C454e with accounting codes. Currently there are no problems with Windows machines on the network, and when I turn off the functionality of account codes to the printer, the MacBook can print normally. When I turn on the accounting function, the looks of MacBooks as it prints normally, however, nothing goes to the printer. No error code / notification occur in OSX or the printer. Have contacted Konica on the current driver and long story short, told me to call Apple (figures). After you have installed the printer driver, go into the features and layout introduction accounting codes and save the settings in a preset, print the application (for example, Safari). If you would be grateful if someone can point me in the right direction on what could be missed, thank you.

  -Vincent

  

  

  

  Unlike almost all other manufacturers of printer, Konica-Minolta did not an agreement with Apple to get Apple to distribute their printer drivers. The only source for Konica-Minolta for the Mac drivers is Konica-Minolta.

  I checked and Konica-Minolta have drivers for El Capitan. See http://www.konicaminolta.eu/en/business-solutions/products/office/multifunctiona l-printers/color/bizhub-c454e/download...

  We use a called package PaperCut to manage our Konica-Minolta printers and to allow us to assign account codes and generating billing reports. See http://www.papercut.com/products/mf/

• New GPU producing Black Screen

  Hello. I recently installed a GTX960 in my system to upgrade my very old ATI Radeon HD 5770. I've used Windows via bootcamp for a few months without any problems. However, recently, one of my hard drives become 'dirty' and the internet I was informed to use the OS x disk management tool I have tried many other things before you decide to start up in mac, but nothing worked. So I decided to start in mac (for the first time since I had installed the gpu) However, this produces a black screen that brings me to where I'm stuck now.

  I tried to go to recovery mode, but it gives the same result.

  With a little research I have found that my CPU does not have graphics integrated so it relies on a graphics card to work.

  (If that helps...) My computer is a mac to mid-2010 pro with:

  • Two 2.4 GHz Quad-Core 'Gulftown' Intel Xeon(E5620) processors with 12 MB of L3 cache
  • 32 GB of 1333 MHz DDR3 SDRAM ECC

  It's a bit urgent as I need this computer for school work.

  To use a GTX960, you must install drivers and since it's not Mac-Flash card you will not get a splash screen, and so you cannot use the special startups as the recovery mode, Option and other whey to see the screen.

  The following links of the lists for Nvidia Mac drivers

  http://forums.MacRumors.com/threads/frequently-asked-questions-about-NVIDIA-PC-n on-efi-graphics - cards.1440150.

  You need to reinstall your 5770 card and then install the drivers for Mac. You may have to reinstall OS x. Then reinstall windows via Boot Camp.

  I don't really know what you mean by "However, recently, one of my hard drives become 'dirty' and the internet told me to use the OS x disk management tool."

  If you Windows disk tools disk to boot camp, you can destroy the OSX install.