MAc OS 10.8.3 proxy authentication failed

Similar Questions

• Authentication Failed: the Proxy to fail

  What's the matter, authentication fails and the message is this:

  Authentication Failed: the Proxy to fail

  Thank you

  Go to network settings > under 'Groups of network devices' click "(non attribué)" "

  Under servers "(Not Assigned) AAA", note the name of the IP address of your machine, which can be confirmed from the DOS command prompt "

  using the command "ipconfig/all".

  Then, return to the Network Configuration > under "Distribution of Proxy table", click on "(default)".

  And make sure you name server entry AAA for your machine is in the column 'Forward To '. If it isn't, then move your entry of the column machines and ensure that all other entry is under "AAA servers. Press 'submit + Restart.

  Finally, try authenticate a client bit against this ACS server.

  Kind regards

  Prem

• Creative cloud, Mac and Proxy authentication

  Hello good people,

  I'm in a bit of trouble with CC, Mac and the Proxy authentication.

  To download my Mac CC wonder password and username authentication proxy, which is enabled in the network, the advanced - settings HTTP proxy preferences . I am able to browse the web and access the Adobe creative web part.

  I used an open wireless connection to download CC and it worked.

  Now when I try to open it asks me to insert the password and user name for proxy.

  I have entered the credentials of well-known work, but the guest retains his return.

  I've seen other posts related to this, I wonder if anyone has found answers?

  Have you tried to add several sites of adobe in order to bypass the authentication proxy on the proxy server, but it did not work, either

  Any help is appreciated mucho!

  Hello

  I solved this.

• PPP CHAP counterpart x 3000-authentication failed

  Hello

  I just bought Linksys x 3000 a few days for my DSL to Jakarta.

  After that I configured my 3000 x, the internet connection could not go up if the PVC connection is in place.

  Here is some information of the device:

  Router information
  Firmware version: v1.0.01 build 2 November 00 22,2011
  Checking the firmware: 914eee0ceca371b4a4231c2af2f9f47f
  Current time: not available
  MAC address: 98:fc:11:dd:0e:cd
  Name of the router: linksys
  Host name:
  Domain name: telkom.net

  Internet connection
  Type of connection: RFC 2516 PPPoE
  Online status: offline
  Internet IP address: 0.0.0.0
  Subnet mask: 0.0.0.0
  Default gateway: 0.0.0.0
  DNS 1: 0.0.0.0
  DNS 2: 0.0.0.0
  DNS 3: 0.0.0.0
  MTU: 0

  DSL connection:
  Status: to the top
  Download speed: 1215 Kbps
  Upstream speed: 442 Kbps

  Connection of PVC
  Encapsulation: RFC 2516 PPPoE
  Multiplexing: LLC
  Type of QoS: UBR
  PCR:
  SCR:
  Automatic detection: disable
  VPI: 0
  VCI: 35
  Activated: Yes
  PVC status: to the top

  And here's what I got in the system log:

  PPP pilot generic version 2.4.2 79
  Deflate Compression of PPP module part 88
  PPP BSD Compression module part 84
  PPPoL2TP kernel driver, 75 V1.0
  ccp_autowan_sm_thread => starts in unconfigured mode, detection of State! 125
  -> State disconnected! 78
  xDSL G.994 training 74
  -> detection of State! 75
  -> dslWanSt = 1, ethWanSt = 0 81
  -> Training RJ11 condition! 79
  ADSL G.992 started 73
  Analysis of channel ADSL G.992 82
  ADSL G.992 82 message exchange
  Link up, carrier 0 ADSL, = us 442, ds = 1215 94
  -> RJ11 State! 70
  PPP-online Start connect... 78
  PPPoE PADI sending. 69
  PPPoE received PADO. 70
  PPPoE sending PADR. 69
  PPPoE server detected. 72
  PPPoE received PADS, session PPP set up. 95
  PPP sends ConfReq id = 0 x 1 [0xb65fbae2 magic] 91
  PPP receive ConfAck id = 0 x 1 [0xb65fbae2 magic] 94
  PPP receive ConfReq id = 0 x 2 [mru] 1492 [auth chap, MD5] [0xc118f417 magic] 121
  PPP sends ConfAck id = 0 x 2 [mru] 1492 [auth chap, MD5] [0xc118f417 magic] 118
  PPP LCP UPWARD. 61
  PPP receive challenge id = 0 x 1, <2x2x2x2x2x2x2x2x2x2x2x2x2x2x2x2x>, name = 127 Huawei
  PPP receive failure id = 0 1 76 x
  PPP CHAP 84 peer authentication failed
  PPP LCP DOWN. 63
  PPP sends TermReq id = 0 x 2 could not authenticate ourselves Exchange 113
  PPP (LCP) send reason Terminate-Request Failed to authenticate ourselves pair. 131
  PPP User name and password authentication failed. 98
  PPP receive id = 0 3 75 x TermReq
  PPP sends TermAck id = 0 3 72 x
  PPP sends TermReq id = 0 x 3 could not authenticate ourselves Exchange 113
  PPP (LCP) send Terminate-Request reason FM timeout. 101
  PPPoE sent PADT. 69
  PPP-online Start connect... 78
  PPPoE PADI sending. 69
  PPPoE received PADT, meeting took end. 94
  PPPoE received PADO. 70
  PPPoE sending PADR. 69
  PPPoE server detected. 72
  PPPoE received PADS, session PPP set up. 95
  PPP sends ConfReq id = 0 x 4 [0xc890720f magic] 91
  PPP receive ConfAck id = 0 x 4 [0xc890720f magic] 94
  PPP receive ConfReq id = 0 x 2 [mru] 1492 [auth chap, MD5] [0xb4a2146c magic] 121
  PPP sends ConfAck id = 0 x 2 [mru] 1492 [auth chap, MD5] [0xb4a2146c magic] 118
  PPP LCP UPWARD. 61
  PPP receive challenge id = 0 x 1, <2x2x2x2x2x2x2x2x2x2x2x2x2x2x2x2x>, name = 127 Huawei
  PPP receive failure id = 0 1 76 x
  PPP CHAP 84 peer authentication failed
  PPP LCP DOWN. 63
  PPP sends TermReq id = 0 x 5 failed to authenticate ourselves Exchange 113
  PPP (LCP) send reason Terminate-Request Failed to authenticate ourselves pair. 131
  PPP User name and password authentication failed. 98
  PPP receive id = 0 3 75 x TermReq
  PPP sends TermAck id = 0 3 72 x
  PPP sends TermReq id = 0 x 6 failed to authenticate ourselves Exchange 113
  PPP (LCP) send Terminate-Request reason FM timeout. 101

  Does anyone have the same experience?

  Please advice.

  Thank you.

  Oh, I'm sorry, I just found out that I put the wrong password PPPoE. After you type the correct password, it works now. Thank God...

• mutual authentication failed in the emv card.

  I try to send the STORE_Data command on my EMV card to store values of the IMB. Here, I got a document that describes the APDU command to install and customize the application EMV on JCOP 2.4.1 revision 3.

  Here, in the document, command sequence is similar-

  SELECT
  INITIALIZE UPDATE
  EXTERNAL AUTHENTICATION
  STORE DATA FOR DGI
  ...
  ...
  STORE DATA FOR DGI.
  
  

  Line written in this Document is - "securitythe key value of the issuer field (encryption, MAC and key encryption key): 404142434445464748494a4b4c4d4e4f." and the value of the sequence counter 0

  
  

  I just downloaded GPSHELL 1.4.4 and try to run the following script:-

  mode_211
  enable_trace
  establish_context
  card_connect
  select -AID A000000003000000
  open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
  card_disconnect
  release_context
  
  
  

  and I got the output as:

  D:\users\Amitp\My Documents\Downloads\GPShell-1.4.4\GPShell-1.4.4>GPShell.exe he
  lloInstalll.txt
  mode_211
  enable_trace
  establish_context
  card_connect
  select -AID A000000003000000
  Command --> 00A4040008A000000003000000
  Wrapped command --> 00A4040008A000000003000000
  Response <-- 6F658408A000000003000000A5599F6501FF9F6E06479100783300734A06072A864
  886FC6B01600C060A2A864886FC6B02020101630906072A864886FC6B03640B06092A864886FC6B0
  40215650B06092B8510864864020103660C060A2B060104012A026E01029000
  open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4
  f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
  Command --> 80CA006600
  Wrapped command --> 80CA006600
  Response <-- 664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864
  886FC6B03640B06092A864886FC6B040215650B06092B8510864864020103660C060A2B060104012
  A026E01029000
  Command --> 8050000008FB3EE9FE0812ABFF00
  Wrapped command --> 8050000008FB3EE9FE0812ABFF00
  Response <-- 0000322000186396921901020000CEBCF3A2D47130C736B6480E4DD59000
  mutual_authentication() returns 0x80302000 (The verification of the card cryptog
  ram failed.)
  
  

  Why is this authentication failed here? To send the command to store I must past this control. any suggestion / idea help me out of this error.

  Thanks in advance...

  I can reproduce the cryptogram of the map with my tool

  KeyDiv	: 00 00 32 20 00 18 63 96 92 19
  KeyInfo	: 01 02

  SequenceCounter: 00 03

  CardChallenge: 70 73 2 c F3 B5 DB

  CardCryptogram: 77 3B 2D 91 35 F6 ED B4

  Last 6 bytes of KEYDATA: 00 18 63 96 92 19

  Entrance to the triple of the 18 ECB:00 63 96 92 19 02 00 18 63 96 92 19 0F 02 F0

  generated kmac: 63 59 D2 9 63 B8 6 b 1 91 68 F4 3 C 4 b 27 F6 AD to

  Last 6 bytes of KEYDATA: 00 18 63 96 92 19

  Entrance to the triple of the 18 ECB:00 63 96 92 19 F0 01 00 18 63 96 92 19 0F 01

  generated kenc: 11 CB 6 b 70 AB E0 5F B1 23 D6 22 88 38 EB 3A E1

  Last 6 bytes of KEYDATA: 00 18 63 96 92 19

  Entrance to the triple of the 18 ECB:00 63 96 92 19 03 00 18 63 96 92 19 03 0F F0

  generated ENCs: 21 DC A5 B4 b 21 17 47 72 02 77 4, 58 F3 EB 6 b 8,

  Session CNTC: 6a B9 66 F2 B2 8F 11 49 31 FE 5F 77 04 0E B4 A5

  Session of the CCMC: C4 F0 42 64 F4 BD 2 8 BEING 52 06 1st FF 1 has 00 4F

  Session RMAC: F7 2 b 72 74 and 74 82 15 6 73 67 05 E6 52 17 B6 E5

  Session ENCS: E3 90 86 E6 F8 8F 58 BB D0 77 A2 0E 0E CF 9 d B2

  Calculated Card Crypto: 77 3B 2D 91 35 F6 ED B4

  Now ext authenticate.

  Cryptogram of the calculated host: FD 89 A6 AB 1 b 6 06 E1

  APDU to wrap: 80 82 01 00 08 FD 89 A6 AB 1 b 6 06 E1

  Your cryptogram of the host is very GOOD, but the MAC is not!

  The cryptogram is done with Kenc

  the MAC is made with Kmac

  Here's how: this method can be used for any APDU after ext authenticate

  block length: 3

  Apdu using updated MAC calculation

  entrance to the SCP02 C - mac calculation: 84 82 01 00 10 FD 89 A6 AB 1 b 6 06 80 00 00 E1

  Ext-AUTH: 84 82 01 00 10 FD 89 A6 AB 1 b 6 06 AC 32 6 a 86 3 a DC C8 DF E1

  I read your message:

  1. -------------------------------
  2. mac session key generation
  3. ------------------------------
  4. KENC: = DES3 (KMC) [00 18 63 96 92 19 02 F0] | DES3 (KMC) [00 18 63 96 92 19 0F 02]
  5. = 6359D29C63B86B1A 9168F43C4B27F6AD

  I agree, the KMAC is correct, even if you named KENC

  At this point, the ICV is zero

  The mac algorithm is MAC final retail (single with final MAC of triples)

  Make sure that you do not mix the key pieces to use for the only part OF THE, here, it should be C4 42 F0 64 F4 BD 2 8.

  Also make sure that you calculated the MAC with the CCMC, not the MAC KEY DERIVED SESSION KEY because I think that you did!

• OSB: [Security: 090302] authentication failed: user... Jim

  Hi all
  
  I'm trying to set up my OSB so I can protect a Web service by using certificates.
  
  The problem is that when I add the security policies at the service of my proxy, I get the following error when you test the service proxy (although the sbconsole):
  
  Impossible to derive the token.javax.security.auth.login.FailedLoginException topic: [Security: 090304] authentication failed: user - Cert Test javax.security.auth.login.FailedLoginException company: [Security: 090302] authentication failed: user - Cert denied test company
  
  I used a few other posts in this forum to implement my wls and osb. For example How to call the service https OSB and how the CERT CN to the principal of ejb SessionContext?
  
  This means that I put the keys, ssl, defaultAuthenticator, defaultIdentityAsserter, enabled X.509 file, set suppliers etc.
  
  My key file contains 2 sets of key public and private keys and therefore should also be ok.
  
  Has anyone else had the same error after configuring their servers of wls and osb?
  
  Thank you
  
  William

  You have configured the default user name Mapper in the affirmation of identity by default to use the certificate CN as the mapped user, [Company - Cert Test is the CN name in the certificate] you will also need to create a user weblogic with the same name as the attribute certificate mapped... Check if you have done the steps as shown here:
  Re: How the proxy service can get the client certificate in Oracle Service Bus

• Boring Proxy authentication requests

  In our local network, we use Firefox (various versions, from 8 to 23, also 17 ESR references) on windows (xp and 7 32bits) computers. We need a proxy http (squid) with user name and password authentication. Generally only configure us Internet Options in the windows control panel checking the indicator on 'use automatic configuration script' with a url of type 'http://proxy/proxy.pac '. In this script, we give a list of intranet sites (web applications) that do not require authentication proxy on the internet because what are internal sites on our local network. Done on firefox, it must use the option "use the system proxy settings. The question is: during a session on intranet sites the dialogue window of firefox for proxy authentication often seems boring of the operator who must close each time. We have attempted to alleviate the problem disabling firefox automatic updates, updates of modules, updates of search engines, are not attack sites and updates of the lists of fake web documents, telemetry, queries and reports of health and crashed. It seems not to be enough to solve the problem.
  Are there other settings to set "subject: config" page? workaround solutions? Add - ons?
  Thank you for your help in advance.
  PS: Sorry for my English, I'm still learning.

  I did some more tests and turn off all the settings mentioned above in the section the problem is resolved.
  Good bye

• Computer format Microtour HP Pro 3010: Hp Support Assistant and LAN with Proxy authentication

  Dear friends,

  I would only know if and how I can 'use' Hp Support Assistant in my office desktop pc, because my desktop pc itself works in the breast of a LAN with proxy authentication.

  Thank you, Paolo ([Personal Information Removed)

  Hello

  Welcome to the HP Support forum!

  Yes, you can use it as long as the desktop PC is HP branded.

• Satellite A100-496: WLan authentication failed because of incorrect password

  Friends,

  I use Intel PROSet Wireless user interface to connect to my wireless router.
  Because of this process, I have disabled my windows for wireless control configuration.

  However, despite the use of the property of device correct password and the password, I am unable to connect to my WiFi router.

  I get an error stating
  * "Authentication failed because of incorrect security password." *

  I use the same password key to connect wirelessly through my other laptops, and they work fine...

  I can't find the reason for this failure of authentication...
  All the world is facing a similar problem?

  Is there a way I can allow windows to control my authtication rather than Intel PRO Wireless...

  Please guide me...

  Kind regards
  Dhiraj Shetty

  Hello

  Again activate the Windows configuration and use Windows WLAN options to configure WLAN connectivity. To be honest, using Intel PROSet, this should work too.
  Try to remove the protection of password on your router for a moment and test the connectivity. To be honest, I'm sure that there is something wrong with the settings of your laptop.

  By the way: what operating system do you use?

• What does "wireless authentication failed because of a time-out" mean?

  Have a combo unit router and modem.  Having two computers.  You can use the wireless that the other cannot use Wired.  Getting messages like "wireless authentication failed because of a time-out," conflict of IP address and canceled due to the delay.  There was a variety of messages.  We had been able to use a router before, but it would be turned off every two hours or more.  Giving the same messages on Windows Vista.  The other computer is Windows XP Motorola
  modem/router.

  Hello

  1. what security WEP, WPA, etc. Do you use?
  2. is the driver software updated for the router to work correctly on Vista computer?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  I suggest you to check if you can connect by using a different port or a different router in case the problem is with the router itself.

  Method 2:
  You can also visit the link provided below, which offers a similar problem resolution. Check if the steps to help you resolve the problem.
  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/4db4caa0-86bb-4b7b-8aa7-252d5653f063

  It will be useful.

• wireless authentication failed because of timeout on new router

  Wi Fi nightmare!

  We bought a new router as we couldn't find MSI we bought the ASUS!

  ASUS WL-520GC router =>

  Wireless authentication failed because the timeout. Layer 2 security key exchange did not generate multicast keys before timeout. I have a Windows vista with the latest Service Pack installed on an Aspire 7520-5115. What I'm doing wrong (I'm a semi ILLITERATE computer!)?

  We bought a new router as we couldn't find MSI we bought the ASUS!

  ASUS WL-520GC router =>

  Wireless authentication failed because the timeout. Layer 2 security key exchange did not generate multicast keys before timeout. I have a Windows vista with the latest Service Pack installed on an Aspire 7520-5115. What I'm doing wrong (I'm a semi ILLITERATE computer!)?

  Help you contact your ISP or ASUS. This isn't a problem of Microsoft.

• 0x8000CCCDF error AUTHENTICATION FAILED when sending or receiving gmail via Windows Live Mail

  How to fix error 0x8000CCCDF

  When I open Windows Live mail, I get... Can't send or receive messages for the Gmail accoune (mymail). (1) account

  Download header for the 'BBY' folder did not complete. The operation was cancelled by the user. (for now, I have no "BBY" in Favorites or elsewhere)

  {The server response: AUTHENTICATION FAILED} ivalid certificate {break}

  Server: 'imap'. gmail.com

  WindowsLiveMail ID: 0x8000CCCDF

  Protocol: IMAP

  Port: 993

  Secure: (SSL) Yes

  I also get a pane open asking me to confirn login, and when I get the pw and email, the response "not recognized".

  I have already created a new restore point and the problem persists. Please notify.

  Vista-IE8 32

  Thank you

  PS, am aware of this site being offline may 20, 2011, I've waited this long, a few days will be okay... I don't have a job in any case. : ()

  Hi place Diago,.

  The question posted here, it fits better the following forum

  http://windowslivehelp.com/product.aspx?ProductID=15

• Authentication failed because the third remote has closed the transport stream

  I am trying to download a zip since an external public server example: https://xyz.com/abc.zip using the webclient.downloadfile () method in an application console, but I end up getting the error below

  "The underlying connection was closed: an unexpected error occurred on a send" and

  "Authentication failed because the third remote has closed the transport stream.

  I tried several solution, but nothing helped. I have no control over the external server. When I manually navigate the link on my browser, I get that download the file, namely the external server is fine and the problem is downloading from the code.

  I tried to put

  System.Net.ServicePointManager.SecurityProtocol = System.Net.SecurityProtocolType.Tls | System.Net.SecurityProtocolType.Ssl3; but it does not work.

  Please suggest

  Hi Anil,

  Thanks for posting your query in Microsoft Community.

  Your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forums.

• Error: Authentication failed. There was 1 of 5 attempts

  Salvation; I hope this is the right place for this question.  I find that I can't install an application for testing.

  I generated a debugging token:

  BlackBerry-debugtokenrequest cskpass - xxx - keystore author.p12 - storepass xxx deviceId - 0x5011D52B debugtoken.bar

  and installed:

  BlackBerry-deploy - installDebugToken debugtoken.bar - device 169.254.0.1 - password xxx

  but could not transfer my application:

  BlackBerry-deploy - installApp 169.254.0.1 FlightDeck.bar

  Error: Authentication failed. There was 2 of 5 attempts

  What should I do now?  More importantly, how can I diagnose this without having to run the forums help?

  ETA: he is an Android application that has been converted to a .bar with apk2bar file and then signed with my signature key.

  Answering my own question, there are two steps that I missed:

  When you run apk2bar, you must add "-d " at the command line.

  When you run blackberry - deploy, you need to add "-password #" to the command line.

  Now I can install applications, but nothing happens when I try to run them.

• Authentication failed due to the error System.

  After spending my fundamental problem with Burrito and 0.9.3 I advanced and made the PlayBook in 90-minute tutorial.

  When running in mode 'on the desktop", the app works great and works.

  When I change mode "On Device" and that the running virtual machine Simulator, then I get the following error:

  Error occurred during the launch of the application installed on the device:
  Error: Authentication failed because the system error...

  I tried to run it without the Simulator VM has started and got the error could not find the device.  I also double checked the password, even if the VM simulator gave me a few problems when I changed passwords.

  Anyone who encountered this problem?

  On a side not, the .bar file was created for the application in the bin-debug folder.

  Hey, Logan,

  sounds like your conditioner ran finding, but when it came to deploy you stumbled upon an error. the only thing that comes to mind (as you already double check passwords) is either a firewall issue, you can check by turning off your firewall temporarily, or maybe your Simulator is not up-to-date (separate in the SDK installation). The latest version is the 0.9.3. Good luck!