Mac will not install usb software

Similar Questions

• My computer will not install any software!

  When I try to install new software. the Setup program starts and says that it is installed the program, but so he's here until the message appears saying that the installer no longer. I guess something is interfering with the process, how can I know what?

  Here is a link to the Adobe support with a phone number to call for assistance to install Adobe products: http://forums.adobe.com/community/general/downloads/purchases.'  Perhaps they can help you because it's their product and they know a lot more about it as we do.  They can tell you it cannot be installed on a Vista 64-bit system (make sure you mention, this is the situation at the outset).  They can also provide you with something that will do install they would know only.  It's certainly worth a try.

  Adobe also has a forum download and installation for the display of questions about these issues, but to read, it doesn't seem to be frequentled a lot and you're not likely to get an answer anywhere near as fast as you do at forums like this one--but here is if you want to try (although I wouldn't bother) : http://forums.adobe.com/community/general/downloads/purchases.  It also includes the phone number for disorder installation and instructions on how to get through and talk to a human being who may be able to help.

  I checked the centre Compativiity of Vista to see if the software is compatible with Vista, but I couldn't find the product described.  This usually means that it has not been tested.  in many cases, this means also is not compatible because it was so old that they have not even not worth a try to test it - but maybe I missed it or it goes by a different name.  Here is the site to check it out for yourself: http://www.microsoft.com/windows/compatibility/windows-vista/Search.aspx?type=Software&s=Adobe%20Photoshop%202.0%20deluxe.  When I went on the WAA site, I tried a Photoshop 2.0 deluxe and found absolutely nothing about it.  What is so old?  Another problem is that you use a 64-bit system, and they have a LOT more problems with compativility software and hardware than 32-bit systems.  I suspect that the program cannot be installed on your system due to these problems.

  You can try a boot minimum http://support.microsoft.com/kb/929135 and see if you are able to install the product in this mode.  If you have the same problems, return the system to normal state, according to the procedures and reboot - it will not solve the problem (and this removes most of the programs and services running and interfere with the installation so that pretty much excludes this possibility).

  Try disabling your AV software and then right-click on the installation icon and click rund as administrator and see if that helps.  Don't forget to reactivate the AV software when you are done.

  Try to start in safe mode (repeatedly hitting the F8 key during startup until the menu appears) and try to install it in safe mode (if it will let you - it can not allow installation, but it's worth a try) and see if it works.

  I hope that one of these options help (assuming that it is possible to install the product with your version of Vista).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• VMware Tools for Mac will not install bug.

  Hello I have a clean install of Mac OS x 10.9 I raise in a virtual machine but when I bring the VMware Tools installed, get an error:

  Cannot install VMware Tools on this disk.  VMware Tools requires Mac OS X 10.5 or higher.

  Screenshot attached.

  I've tried versions both 6.0.1 and 6.0.2 darwin.iso for VMware Fusion. but the same error.   I wonder what VMware is actually audit to determine the versions of operating system.   I have in the past summer success install the same software on the same computer, but I have tried to reinstall from scratch (more than once) and tried many changes of setting on both hosts and guests with no joy.   Anyone know how to fix?   

  Thank you.

  mapsurfer wrote: there was a facility of Mavericks I had done a ton of work on which to install VMware Tools, which makes me think there is some file touched along the way

  who was happy to install VMware tools...

  I'll tell you one last time...  When clean install OS X 10.9 Mavericks under VMware Fusion 6.0.2 VMware Tools are not automatically installed!

  In addition, it turns out that the "internal" or "removable" made no difference that I was able to move the vmdk from SATA, SCSI (appears inside the system) but that made no difference either but has been tested

  I have mentioned that the drive internal vs external because VMware Fusion before 6.0.2 has not created a good installer for OS X 10.9 Mavericks nor was it settled the case, and the fact that it was not properly installed may have been a contributing factor to the VMware Tools install problem not necessarily imply that the disk shows as external!

  I wonder if there is another way to install VMware Tools manually?  I can see the directory structure exposed within the darwin.iso but don't know if I can cp

  This straight out of the iso, but not being is not a Mac OSX expert... don't know if I can run alternate and no package installer idea what files are changed by install VMware Tools.

  Still confident enough, I can work around the issue of the installer.

  I just tested this on a clean build and with the help of pacifists opened the VMware Tools.pkg (Install VMware Tools.app/Contents/Resources/VMware Tools.pkg) in the bundle 'Install VMware Tools.app' on darwin.iso (VMware Tools for OS X) and "Selected files.pkg content" then clicked on install and check 'use administrator privileges '.  He basically just moved the files in places and then after that I restarted the computer virtual VMware Tools seem to work.  I tested VMware shared folders, copy & paste, drag & drop, and change the resolution of the screen... all seem to work fine, however it was simply intended as a test and not a recommended method to install VMware Tools and I don't know if it is essentially a complete installation.  I don't have the time now to analyze the two occurrences, one made appropriately and the other using pacifists to see if there is in fact no difference.

  I was also going to take the vmdk to another platform and see if any difference (doubt it will be)

  Any platform with not brand hardware Apple is a direct violation of the SLA products and may not be discussed in these forums!

• PSE8 Mac will not install

  After launching the installation process on the DVD system and entering the serial number, the installer says "preparing to install" and then nothing happens. It's on my new iMac 21.5 '' LED screen end of 2009 under Snow leopard OS X 10.6.2

  I also tried installing on my 2007 Macbook and had the same problem: click on the install button that briefly fades and then becomes white and nothing happens.

  I tried to copy the folder Adobe Photoshop Elements 8 on CD and on my iMac, as suggested a review on the Amazon PSE8 Mac page that had the same problem and trying to install that does not work either. Note: I made sure that Safari is not running that caused an error message when you reinstall my old PSE6 on my iMac.

  Could this be a faulty DVD PSE8? I posted this issue in the Support Portal on 19/11/2009 Adobe customer and did not respond.

  I was really looking forward to familiarize themselves with the new features of PSE8 for the Thanksgiving holiday and am very disappointed by this turn of events!

  Since except PSE6, you have no other product installed Adobe, then PSE 6 uninstall should remove Bridge CS3 as well. You can cross check that. Let us therefore this thing - uninstall PES 6 (through the uninstall Adobe program), check that all Adobe applications have been removed from the system, delete the folder next to the system by moving it to the trash and empying the trash.

  \Library\Application Support\Adobe\

  Install the new PSE 6 and then install PSE 8. Let me know if it works otherwise, we will have an internet session where I will try to see if I can solve this problem.

  Kind regards

  Ankush

• HP Envy: Mac will not accomplish update software/HP envy send scan for Mac

  Tried to scan a document, wouldn't connect. Said I should update software HP tried repeatedly to update, kept getting to 70 MB ish saying connection lost, then start all over. Very frustrating!

  Hi @Plutosma,

  To access the support page, you must click on the analysis of the workarounds.

  Hope that answers your question. Thank you for posting!

• OfficeJet 7310: Officejet 7300 series software will not install on new pc Win 7

  My Officejet 7310 networked HP software will not install on my new Dell Precision Tower 3620 running Windows 7 64 bit.

  Downloaded file is: AIO_CDB_Net_Full_Win_WW_130_141.exe

  * When you run the Setup program, two errors that have occurred having to do with the system who don't not USB capacity or equipment. (There are about 8 USB ports that work, some USB 3.0, any other USB 2.0).

  * Try with disabled firewall doesn't change anything.

  * If I'm running the original printer installation disc, it downloads the new software and I find myself in the same dead end.

  Sitting next to this machine is my (dying) old workstation Dell Precision 390 with Win 7 and operate the HP and related applications very well Solution Center with the same network printer. (The two machines work protection antivirus Malwarebytes'.)

  It sounds crazy!  Any suggestions on how to fix would be greatly appreciated.

  Hello

  Run the Setup program and comlpete extrction process.

  Once the installation dialog box appears to put an end to this window.

  In Windows Explorer, press and type % temp % fall.

  Locate the most recent installation folder, which begins with 7z (e.g. 7z1234s)

  Open the installation folder.

  Rename the file named usbready.exe in usbready1.exe

  Back a levell and run the Setup.exe file.

  Now follow the installation and check for the difference.

  Please let me know the results,

  Shlomi

• 4200 software all-in-one printer will not install in Windows 7

  I have a 4280 printer all in one that works very well with Vista 32 bit OS. I really like the interface of HP. I had a Dell with Windows 7 Professional 64 bit desktop computer. I was able to load without any problems except the printer.

  I downloaded the latest software of HP 64 bits for the device 4280. Installation takes place upwards the agreement "accept" screen and when I check the box to accept (name and c drive location, features to install, etc.) and then press the "continue" button disappears from the HP installation window. There is no reported errors or system events that I can find.

  I tried all the suggestions on the site of HP for Windows 7 with no luck. I found Windows 7 install a driver immediately once you plug the USB connection. Tried a new printer / I drive with no luck.  I tried Windows 7 32 bit with identical behavior that disappears. I tried safe mode and diagnostic mode in case something was interfering... same result.  At least antivirus and firewall have been disabled and nothing else worked. I even ordered a CD from HP with the same result as the downloaded program. CHKDSK and scannow will find no problem with Windows.

  I can run the printer and the scanner with windows drivers, but the interface, especially for the scanner is not functional enough. I get kind of work in a virtual XP environment, but it is very slow and a little less functional loading... vista vs XP I guess. In short not a viable solution. I could buy a new all-in-one, but I'm worried it will not install and this can become costly experimentation, not to mention my stock of the 4280 cartridge.

  I would really like to find a way to get the HP software to install. Someone has an idea?

  Hello again Tom5223,

  I see that we still have problems installing the printer on your computer.

  I suggest to call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  A representative of HP has the ability to use more advanced troubleshooting steps and will be better equipped handle a problem like this.

  Thank you for your time.

• Adobe Photoshop CS6 will not install on my Mac.

  Adobe Photoshop CS6 will not install on my Mac. Adobe Application Manager is to see the beta version of Photoshop CS6 on my machine.

  I have uninstalled/removed all previous versions of the software and the Adobe Creative Suite Cleaner tool used to rinse my machines. Unfortunately,.

  I always get the following error message:

  Failed the Installation Photoshop cs6

  A beta version of this product exists on the computer. Exit and uninstall this version before continuing.

  

  I have uninstalled/removed all previous versions of the software and the Adobe Creative Suite Cleaner tool used to rinse my machines. I'm stuck now!

  Any help would be appreciated.

  See you soon,.

  Richard

  It's the statement to remove PS CS6 beta

  http://forums.Adobe.com/message/4361731

  It is strange that you have run the cleanup tool and that it did not always work

  You can try to connect to the Root user account and then run the cleanup tool and then check.

• Software CyberLink will not install on Win 8

  H8 1380 t CTO, Intel i7 3820 processor. 16 GB of DDR3 Ram PC3-12800 memory. FRIEND bios (UEFI), Version 2.14.1219 (current).
  Pegatron Motherboard-IPIWB-PB (Pittsburg) Audio Beats. AMD, Radeon HD 7570-1 GB graphics card.

  Hello

  Installed Win 8 (own) on a second partition, (dual-boot factory Win 7 and Win 8 on the second partition). Installed all the software and drivers from HP for this system without any problems except for the elements of Cyberlink,"error 1603" code.

  Any suggestions on why Cyberlink programs will not install?

  Thank you

  Hello

  Check the compatibility of your products from Cyberlink here.

  The HP position maintenance for Cyberlink is only an update.

  If you have installed under W7 from Cyberlink, then try the "check compatibility" button to see if improvements are required.  So just try to install Cyberlink under W8 then click on the products tab Compatibile.

  BTW, nice PC.

• USB 3.0 AMD host controller driver will not install.

  The USB 3.0 AMD host controller driver will not install.  He would then set I uninstalled assuming that Windows would be updated and reinstall.  Now it will not reinstall.

  Any ideas?

  Hi Felix,.
  Thanks for the reply.

   
  Have you tried the methods suggested earlier?
   
  Refer to issues related to the printer:
   
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Download and install the latest drivers for your printer from the manufacturer's website.
  http://support.Lexmark.com/index?page=answers&startover=y&locale=en&UserLocale=en_US&question=Lexmark+S410#2
   
  I hope this helps.

• CC will not install (Mac 10.11.4)

  Hello!
  I downloaded CC after registration for a year, but I can't get the installation runs. I get "this application wants to make changes please type password" I type my password but nothing happens after that I'm doing this.

  Kind regards

  Emil

  Hello

  The user name and password requested here is the password of the computer. I would ask to make sure that you do not use the Adobe here password.

  Please try to use the computer password and let us know if any question.

  You can also view the threads below:

  I can't my creative cloud Adobe (Photoshop) running

  What password required?

  Re: Password on Mac problems

  Re: Password on Mac problems

  Adobe first Elements 14 will not install

  'CC Installer wants to make changes' continues to appear, do not accept the password

• I realized that I had a message to update for a while then when I checked, I found that the app CC was missing. I downloaded and installed the application, but it will not update of software. In the creative cloud Panel, the only options I get are the Hom

  I realized that I had a message to update for a while then when I checked, I found that the app CC was missing. I downloaded and installed the application, but it will not update of software. In the creative cloud Panel, the only options I get are the Home tab to check the activity and the Stock tab. The applications tab is missing. How can I get that back so I can update photoshop and lightroom?

  Please, try the steps mentioned here https://helpx.adobe.com/creative-cloud/kb/apps-panel-reflect-creative-cloud.html

  Let me know if it works!

• I am trying to install CS5 on my iMac, after my computer crashed. I get a message saying that the software is already installed and will not install again. How can I install it again?

  I am trying to install CS5 on my iMac, after my computer crashed. I get a message saying that the software is already installed and will not install again. How can I install it again?

  Hi Marleneb3511919,

  I'm sorry for the inconvenience caused to you.

  I guess you tried rebooting your system?  If so, and the problem persists please try the steps listed in this document https://discussions.apple.com/thread/240851?start=0&tstart=0

  Please let us know if this goes through.

  Kind regards

  Aurélie hamadi

• installation of Adobe is already running on mac osx10.9.5 will not install lightroom 6.0?

  installation of Adobe is already running on mac osx10.9.5 will not install lightroom 6.0?

  You can please download Lightroom6.0 here: Install Photoshop Lightroom

  (After downloading the .7z file, you must first extract and then run installation, if you go directly launch the setup that it will not be installed)

  If there is still Trouble in installation please contact customer (support Chat), they will help you to install your application.

  Adobe customer care http://helpx.adobe.com/contact.html

  • Remember that you are logged on the page with your Adobe ID.
  • Select your product and what you need help with
  • Click on the blue box "still need help? Contact us. "

• I have LR 6 (upgrade LR 5and4) installed on Windows PC and switch to Mac. It will not install on Mac since the earlier version is installed. Is there a solution?

  I have LR 6 (upgrade LR 5and4) installed on Windows PC and switch to Mac. It will not install on Mac since the earlier version is installed. Is there a solution?

  Update should allow you to enter the serial number of the previous version during the installation

  If this does not work, you must communicate directly with Adobe

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html