MacBook pro 2 logon screen starts with no arrow cursor and must be restarted

Similar Questions

• Apple MacBook Pro 2012 does not start

  2012 Apple MacBook Pro.  Does not start.  Just get the folder with the question mark.  gives possibility to restart with the ERD, but the model doesn't have a hard drive.

  Help the college student needs to access files on the hard drive for the finals.

  Thank you

  What happens when you start to recovery

  OS X: on OS X Recovery - Apple Support

  and repair/disk startup disk via disk utility which is located in the recovery of aid?

  If it is repairable so reinstall OS x, as the article says

  Also here is covered:

  On the screens, you see when you start your Mac - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• I have a macbook pro 15 "model 9.1 4 GB of memory and want to extend to 8 which is the model of memory should I buy for my fastest machine, I have for several years.

  I have a macbook pro 15 "model 9.1 4 GB of memory and want to extend to 8 which is the model of memory should I buy for my fastest machine, I have for several years.

  See:

  http://eShop.MacSales.com/shop/memory/Apple_MacBook_MacBook_Pro/upgrade/DDR3_160 0MHz_SDRAM

  Get only the memory of a place as above, since Macs are picky about the memory. Another place is crucial.

  If you can't swing for 16 GB (2 X 8 GB) replace a strip of 2 GB with a key of 8 GB.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Satellite A215-S4757: screen started to shake, moving up and down

  I bought my laptop about a year and a half and no major problems until this week.
  It started a few days when the image on the screen started to shake, moving up and down and lines began to appear on the screen and get out. I restarted the computer, but the screen would not power on. After a few tries, it ends by came and worked fine for a while before he has begun to do the same thing again. It happened a few times until yesterday when no matter how many times I tried it didn't come.

  I don't think that the problem is only with the screen because I have the laptop connected to my TV via the VGA cable and image out there doing the same thing once more. Also although powers mobile upward and the power light lights, satellite words do not light upward unless the screen lights up.

  The CAPS LOCK button also has a light on what should be enlightening (pressed) so if everything works fine and it does not either.

  Does anyone know what I can do to fix this?

  Thank you.

  Hello!

  Have you installed the latest driver to display on the Toshiba site?
  http://www.CSD.Toshiba.com

  In the worst cases, the motherboard should be replaced. I doubt that s a display problem internal because you have the same problem on the external monitor.
  So contact the nearest ASP.

  Good bye

• New session started with an advertising page and all my tabs are lost

  New session started with an advertising page and all my tabs are lost. Restore the previous session is not active. How can I restore my tabs?

  Great work!

  Sessionstore.bak files are ancient, probably autour time that you have installed Firefox 33 when the sessionstore-backup folder has been added.

  To try using one or more files in the sessionstore-backup folder, here is the process:

  (1) exit Firefox and it must create a sessionstore.js from the main level of the profile folder file.

  (2) rename sessionstore.js to sessionstore.old file, or if you think that you will ever need, delete it.

  (3) copy in recovery.js or previous.js and rename sessionstore.js.

  (4) start Firefox then try to restore previous Session. Those are the tabs you want? If this isn't the case, you can try one of the other files in your backup sessionstore-backup.

  If none of the files has the missing tabs, you could try a recent Windows restore point. It's more complicated on Windows 8 on Windows 7, and you could benefit from using a third-party utility. These have been mentioned in another thread:

  • http://nicbedford.co.UK/software/systemrestoreexplorer/
  • http://www.ShadowExplorer.com/

  Or... I read on a roundabout way to get previous Versions on the Properties dialog box in Windows 8. I can't test it myself, but here's what you do:

  In the address bar of your Windows Explorer dialog box, replace the current path with the following and press ENTER:

  \\localhost\c$

  Then click at the end and nail on the following (with your user name) and press ENTER:

  \Users\username\AppData\Roaming\Mozilla\Firefox\Profiles

  That should help you in the vicinity of your profile folder. Then you can right-click sessionstore.js > properties > Previous Versions, or try one of the files in sessionstore-backups.

• How I replace the toolbar firefox... and remove the toolbar that starts with the MOST VISITED and SUGGESTED SITES

  Somehow lost the toolbar that has the page back arrow and refresh and stop icons. How can I replace those and remove a toolbar that starts with the MOST VISITED and lists several SUGGESTED SITES.

  Hello kittyheckel, please see the Navigation buttons such as back, home, bookmarks and recharge are missing. You'll want to disable the bookmarks toolbar and enable the navigation toolbar.

• I just got a MacBook Pro renovated Friday. It won't turn on and continues to beep.  What could this be? He was working.

  I just got a MacBook Pro renovated Friday. It won't turn on and continues to beep.  What could this be? He was working.

  The number of beeps

• I have a paid subscription to CC. My computer died and I got a new. MacBook Pro. Now I can't find my membership and I had to do a 7 day trial to function. How can I find my products so I'm paying?

  I have a paid subscription to CC. My computer died and I got a new. MacBook Pro. Now I can't find my membership and I had to do a 7 day trial to function. How can I find my products so I'm paying?

  Connect to www.adobe.com before your Adobe ID

  Download the cloud desktop application and install it.

  Download and install your Cloud applications from within the cloud desktop application.

• How to remove the trial version of Acrobat DC 30 days that I have somehow on my MacBook Pro?  I don't want the dang thing, and it prevents me from using my Acrobat Pro 11 software.  Trying to access using the tree without end of support for Adobe is reall

  How to remove the trial version of Acrobat DC 30 days that I have somehow on my MacBook Pro?  I don't want the dang thing, and it prevents me from using my Acrobat Pro 11 software.  Trying to access using the tree without end of support for Adobe of really making me cranky.

  Hi thomh65004143,

  You simply drag the Acrobat DC application from the applications folder to the trash to uninstall.

  Then restart your system & install Acrobat XI Download Adobe Acrobat products. Standard, Pro | DC, XI, X.

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• When I use dreamweaver cs6 browser Checker to find pages, it creates another page starting with the letter T. And he added this page to my folder. How can I prevent that from happening. I use a Mac.

  When I use Dreamweaver cs6 browser Checker to find pages, it creates another page starting with the letter T. And he added this page to my folder. How can I prevent that from happening. I use a Mac.

  Are you spotted with temporary files?  In Edition > Preferences > Preview in browser.

  Nancy O.

• Annoying hourglass constantly flashes along with the arrow cursor.

  Original title: annoying hourglass!

  Since a deep cleaning with Tune Up Utilities, I find that an hourglass flashes constantly along with the arrow cursor.

  I also think now that the buttons do not always to react when clicked, although they will be later.

  Everyone out there find this and I hope to have an answer?

  davewilk5944

  Dave has not been heard from in almost 3 years and since it's the XP community, and you have Windows 7, you can post your request in the community of Windows 7 which is here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7?tab=threads

  And the advice of this KB article for this is terrible advice:

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfig and click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

  If you do this, your system will be load and start own Service and component on your system, and it's very ulikely you want that to happen--unless you want your system to work not as yak squeeze.

• Two Macbook Pro, both does not start up, when I press the power button, I hear two disc bit Caryl, I see little light on the front on the displasy release button, black screen, no edge

  It was weird because I've NEVER had two computers have the same problem before. They are the model 2008 2.2 Ghz Core 2 Duo, 6 g of RAM, models of 128 GB of hard drive, the two Yosemite running, both had new hard drives, cables, batteries and RAM installed OWC (Apple approved reseller) and I use Macs for at least 20 years. In about a week, one just blacked out while sitting on my desk doing nothing, the other does the same on a week later. When I press the power button, I hear the drive hard hum twice, then all I get is the little light on the screen release button, that's all. Black screen. fails, nothing. I can press the power button and it will fit off the coast. Is it possible that some of them have infected somehow, or possibly send me the malware that has infected my system? I would not normally only, but for all of them to go down to one right after the other with the same problem just made me think, it must be the same cause, but what?  I had been in a war of fire recently with very ugly people, and I've never seen two Macs have the same exact problem in a row like that right.

  I took readers on the Macbook Pro, put them on sleds and threw them in my PowerMac, and both seemed fine, no problem, started well upward, ran utility disk on them, no problem, so I started to the checklist. Reset the PRAM. Nothing. SHIFT key at startup. Nothing. D at the start. Nothing. V order at startup. nothing. I wouldn't mind even their evisceration and making a portable useful with the parts of the two, but until I find out what the problem is, what can I do?

  If anyone has any suggestions, I would really appreciate it, I've supported every button I can think at the start, tried an inch USB key, boot and disk, this is the same Caryl bit both of the car, no chime, black screen, that's all.

  Thanks for your help.

  Damicon999 wrote:

  Is \Is possible for someone they have infected somehow, or possibly send me the malware that has infected my system?

  no chime, black screen, that's all.

  I don't think they are infected.

  The startup chime indicates that the Mac has made the initial diagnostic tests and there is no hardware problems or fundamental software.

  No edge in your case is a problem.  I think it's the luck of the draw to have 2 failures.

  In or out of warranty you can get for free a 'Apple Service Diagnostics' OTC test

  Genius of booking http://www.apple.com/retail/geniusbar/

  Online https://getsupport.apple.com/GetproductgroupList.action

  check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

• El Capitan 10.11.2 disconnects from the network of Canon printer macbook pro after each use but with the same OS version iMac remains connected

  How to prevent my Macbook Pro El Capitan 10.11.2 going to disconnect my network printer Canon?   My iMac running the same OS version don't unplug and behaves like any normal wireless connection.  I deleted the printer and added back, reset printing, etc. nothing works.  Given that the Mac is 6 "each other and 5 feet of printer during the last test, it must be something specific to the Macbook.  The Macbook identifies the printer after each reboot the printer as printer Canon right, but once the task is completed does not have the printer.  Everything is on the same wireless network. Computer Windows also recognizes the printer and it keeps alive after printing.

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• MacBook Pro (15 inch, end 2013) with MacOS Sierra 10.12: kernel_task maxing out CPU with external display

  I have a maxed out end 2013 the MacBook Pro Core i7 to 2.6 GHz, 16 GB of DDR3 RAM, 1 TB SSD, NVIDIA GeForce GT 750 M 2048 MB, Intel Iris Pro 1536 MB.

  Also, I have a DELL P2415Q Display 24 inches (3840 x 2160) using Thunderbolt, are involved through the headphone jack and use a USB for lightning to recharge my iPhone.

  I upgraded to macOS Sierra the day he is released and had no problems until this morning. I unplugged my external screen and speakers and used my laptop for about 15 minutes, the battery, and then returned to my office and plugged my Thunderbolt, rear speakers display in and my CPU shot at 100% and never came back down. My Mac is essentially useless because kernel_task is eating all my CPU and to prevent another asks to enter the CPU.

  I have since audited equipment - everything was fine, reset the NVRAM and I tried to erase IOPlatformPluginFamily.kext .plist files but I couldn't on my Mac (trying to follow this guide, started in Safe Mode and everything then went to try and find the file and my Mac just does not have it). When my external screen is plugged if I'm doing anything CPU intensive (videophone, opening of Chrome, etc.) then my kernel_task gets mad again, and the only way to move is to unplug my screen. Connect my iPhone to charge the tips also my kernel_task as well. I followed my internal temperatures, and nothing was out of the ordinary, to cold currently at about 140 °.

  At this point, it seems that any time that puts something on the charging system and increase the temperature internal internal components of my Mac kernel_task maxes my CPU, which brings my Mac to its knees.

  Any ideas how to fix? Is this just a major bug in 10.12?

  Hi, Trent L.

  Try this - problems with macOS Sierra? This fix can help you.

  He got rid of all my macOS strangeness of the Sierra.

  Hope this helps,

  -BrainSel

• MacBook Pro 2008 does not start. WHY? (Fix included)

  I have an old soldier, a Macbook Pro in early 2008. Like many others with MacBook as old as mine, I had the problem of my Mac, no start, showing only a black screen when I lit. He came to the point that I roll the die, each time that I chose to shut down the computer, I was wondering if it would ever start again. After taking in to get fixed twice and he'd end up and die after a few weeks, I tried a quick (and free-_-) fix I could do at home. (Note this isn't my question again, because I want to help some people who have the same problem, I had). I found a (I hope I remember where) online and I still thank the poster that has name up to this day.

  The idea is the laptop overheating, refresh, then cross your fingers and hope that it starts. Here are the steps I followed:

  1. Remove the battery (if you can) and connect your Macbook.
  2. Find two pillows for "sandwich" of your Macbook with.
  3. Turn on the Macbook and put it on one of the UPSIDE-DOWN cushions. (This is critical!)
  4. Ask the second pillow placed on the computer (always upside down) and leave for an hour and a half, running. (It may help to cover pillows with more effective coverage trap heat).
  5. After that he did heating, place it in a room different upside DOWN and leave it for at least 8 hours. (Night works too).
  6. Turn UPSIDE down and pray that it starts. Repeat the operation if not... But if this is the case, you CAN use the computer right up. Just leave the upside when you have finished using it.

  WARNING! This Act of overheating probably detrimental to the health of your computer. My computer is running stronger and a little bit slower than before, but if it does not, what really does anyway? My point is, there is a risk that is innate to this process, although I've never had any real problems with it.

  Now for my question: WHY? Why the computer have this problem in the first place? Even if I found a solution, I would know exactly what I'm fixing. I was curious and were all that I could never find solutions, but no real explanations. If you have any ideas or knowledge in the field, I would greatly appreciate a response.

  In addition, if you have any questions about the fix, please file an issue. This post is also a way to help you guys as well.

  This particular type of MacBook frequently has graphic problems. This can be corrected (more or less) by "cooking" the logic board. What you are essentially a type of cooking with a mild detergent. And it has been done before!

  https://www.iFixit.com/answers/view/9045/MBP+A1226+logic+board+last+resort+fix+f or + nVidia + video + chip

  There are more rigorous methods, like this: https://www.youtube.com/watch?v=Ztzv2OlQJuU