MacBook pro 2011 very slow to load anything, download applications, installation of El Capitan...

I am a computer scientist, to work on a Macbook Pro 9.2 A1286 2010 client; I found first of all that it would not recognize the HD. Then, of course, first a PRAM reset.

Still no hard drive. So I ran Apple Hardware Diags, he finds that everything was fine... but he did not check the drive, because he did not either.

So I swapped the HD for the nine existing. Still no joy. Then, I tried the optical drive SATA port using a trolley car, and it worked.

So, now I think to myself, I just need to replace the original HDD SATA cable.

But in the meantime, I now use this optical drive SATA port to install an operating system.

So I'm intstalling El Capitan... and he's going VERY slowly... said 27 minutes left, then after even 30 minutes, it says 26 remaining minutes... even for every minute of time estimated to the left. Hours trying to install what should move a lot more quickly. Two SATA ports run at the same speed, so that wouldn't make any difference.

I have about 20 + Mbps download speed, and I d/l El Cap several times before on this same bandwidth and it goes as one might expect.

Also, I noticed in trying to engage around all preparation of the installation, everything seemed to be in slow motion, with a lot of time-outs of spinning, before of the OS responds... even trying just to get the pop down menu, etc. It is a system with no operating system, just off the coast of the temp install DVD or USB operating system installed.

The summary is that something in the firmware seems to be wrong. I find that there is a SMC and EFI up-to-date, but who can not install without the latest OS, so the attempt to d/l El CAP.

I'm looking for light bulbs go out there as to what might slow down this computer that doesn't even have a hard drive running an OS yet?

Thanks in advance for any input you may have.

Ironic

Ways to help make a slow Mac faster

17 reasons why your Mac runs slower than expected

Slow performance of Mac? This Article addresses!

Difficulty of slow start in OS X | MacFixIt - CNET Reviews

How to fix the slow down time and start. | MacTip.net

6 easy tips to speed up OS X Yosemite on your Mac.

Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan activity. Also, visit The FAQ XLab and read the FAQ on the treatment with The Spinning Beach Ball of Death.

Download and reinstall OS X El Capitan 10.11.4 Combo Update


The ultimate solution

Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

Tags: Notebooks

Similar Questions

  • MacBook Pro is very slow

    My MacBook Pro is very late. When switch on mac it takes about two minutes to open and run. It's slow when I open programs too. I bought a rehab of my mac and two cannot be opened now.

    Hi Nag0811:

    Try to download and install EtreCheck http://etrecheck.com/ and post the results here.

    Maybe someone here will be able to see what your problem is.

    Kim

  • MacBook Pro running VERY slow

    Hello!

    I loved using my MacBook Pro.  It's REALLY slow.  I read all the posts on how to solve the problem and we have tried most of them.  Still slow.  Nothing wrong with the battery, speakers, etc.  Simply slow to move, slow to open apps, beachball for days, takes forever to edit video and audio.  I ran EtreCheck as suggested by another user, and here's the summary.  Any help would be MUCH appreciated!

    Thank you!

    K

    EtreCheck version: 2.9.12 (265)

    Report generated 2016-06-18 09:39:51

    Download https://etrecheck.com EtreCheck

    Time 11:07

    Performance: poor

    Click the [Support] links to help with non-Apple products.

    Click the [details] links for more information on this line.

    Problem: The computer is too slow

    Description:

    Slow to start and open applications

    Hardware information: ⓘ

    MacBook Pro (13-inch, mid-2012)

    [Technical details] - [User Guide] - [warranty & Service]

    MacBook Pro - model: MacBookPro9, 2

    1 2.9 GHz Intel Core i7 CPU: 2 strands

    8 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 4 GB DDR3 1600 MHz

    BANK 1/DIMM0

    OK 4 GB DDR3 1600 MHz

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 405

    Video information: ⓘ

    Graphics Intel HD 4000

    Color LCD 1280 x 800

    System software: ⓘ

    OS X El Capitan 10.11.5 (15F34) - time since started: about 7 days

    Disk information: ⓘ

    ST1000LM024 disk HARD APPLE disk0: (1 TB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    Macintosh HD (disk 1) /: 998,97 go-go (245,62 free)

    Storage of carrots: disk0s2 999.35 GB Online

    HL-DT-ST DVD - RW GS31N)

    USB information: ⓘ

    Apple Inc. Apple keyboard / Trackpad

    Computer, Inc. Apple IR receiver.

    Apple Inc. BRCM20702 hub.

    Apple Inc. Bluetooth USB host controller.

    Apple Inc. FaceTime HD camera (built-in)

    Apple Inc. IPhone.

    Information crush: ⓘ

    Apple Inc. Thunderbolt_bus.

    Goalkeeper: ⓘ

    Mac App Store and identified developers

    Kernel Extensions: ⓘ

    / System/Library/Extensions

    com [no charge]. Cycling74.driver.Soundflower (1.5.2 - 2016-06-07) [Support]

    Launch system officers: ⓘ

    [loaded] 7 tasks Apple

    [loading] 147 tasks Apple

    [operation] 84 tasks Apple

    Demons of launch system: ⓘ

    [loaded] 44 tasks Apple

    [loading] 153 tasks Apple

    [operation] 94 tasks Apple

    Launch officers: ⓘ

    [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-06-08) [Support]

    [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-05-23) [Support]

    [operation] com.adobe.AdobeCreativeCloud.plist (2015-07-29) [Support]

    [loading] com.coupons.coupond.plist (2014-02-19) [Support]

    [loading] com.oracle.java.Java - Updater.plist (2014-09-10) [Support]

    Launch of the demons: ⓘ

    [loading] com.adobe.ARMDC.Communicator.plist (2016-05-23) [Support]

    [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-05-23) [Support]

    [loading] com.adobe.SwitchBoard.plist (2012-01-18) [Support]

    [operation] com.adobe.adobeupdatedaemon.plist (2016-04-17) [Support]

    [loading] com.adobe.agsservice.plist (2016-04-17) [Support]

    [failure] com.adobe.fpsaud.plist (2016-04-15) [Support]

    com.app4mac.CheckUpAgent.plist [failure] (2008-08-02) [Support]

    [operation] com.fitbit.galileod.plist (2015-10-30) [Support]

    com.makemusic.finale.Installer.cleanup.plist [no charge] (2011-12-05) [Support]

    [loading] com.microsoft.office.licensing.helper.plist (2013-09-13) [Support]

    [loading] com.oracle.java.Helper - Tool.plist (2014-09-10) [Support]

    [loading] com.oracle.java.JavaUpdateHelper.plist (2015-08-01) [Support]

    [loading] com.sibelius.sari.plist (2010-12-01) [Support]

    Launch User Agents: ⓘ

    [loading] com.adobe.AAM.Updater - 1.0.plist (2012-01-18) [Support]

    [failure] com.adobe.ARM. [...]. plist (2011-03-03) [Support]

    [loading] com.adobe.ARM. [...]. plist (2010-07-26) [Support]

    [loading] com.google.keystone.agent.plist (2016-03-02) [Support]

    [operation] com.spotify.webhelper.plist (2016-06-10) [Support]

    User login items: ⓘ

    Microsoft application to THE daemon (/ Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft to THE Daemon.app)

    Application of system events (/ System/Library/CoreServices/System Events.app)

    Dropbox application (/ Applications/Dropbox.app)

    Hidden Spotify Application (/ Applications/Spotify.app)

    Fitbit connect Menubar Helper Application (/ Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Helper.app of the menu bar)

    NETGEARGenie application (/ Applications/NETGEARGenie.app)

    Other applications: ⓘ

    [ongoing] com.adobe.CCLibrary.8352

    com.adobe.acc.AdobeCreativeCloud.73312 [loading]

    [ongoing] com.adobe.acc.AdobeDesktopService.96992.31C63D4A - 84D 1-4113-A5A3-A04138ACC90B

    [ongoing] com.fitbit.GalileoMenubar.156832

    [ongoing] com.getdropbox.dropbox.49312

    [ongoing] com.microsoft.Excel.77792

    [ongoing] com.microsoft.Office365Service.83232

    com.microsoft.Word.78752 [loading]

    [ongoing] com.Microsoft.AutoUpdate.FBA.148832

    [ongoing] org.Mozilla.Firefox.71712

    [loading] 407 tasks Apple

    [operation] 231 tasks Apple

    Internet Plug-ins: ⓘ

    DirectorShockwave: 11.6.8r638 (2012-10-04) [Support]

    Default browser: 601 - SDK 10.11 (2016-05-27)

    Flip4Mac WMV Plugin: 2.1.3.10 (2007-10-08) [Support]

    Musicnotes: 1.19.0 (2011-08-05) [Support]

    RealPlayer Plugin: Unknown (2012-08-17) [Support]

    AdobeAAMDetect: 3.0.0.0 - SDK 10.9 (2016-04-17) [Support]

    FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-21) [Support]

    AdobePDFViewerNPAPI: 15.016.20045 - SDK 10.11 (2016-06-07) [Support]

    Silverlight: 5.1.20513.0 - SDK 10.6 (2013-10-09) [Support]

    QuickTime Plugin: 7.7.3 (2016-05-27)

    Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-21) obsolete! Update

    iPhotoPhotocast: 7.0 (2010-07-25)

    SharePointBrowserPlugin: 14.6.0 - SDK 10.6 (2016-01-12) [Support]

    AdobePDFViewer: 15.016.20045 - SDK 10.11 (2016-06-07) [Support]

    CouponPrinter-FireFox_v2: 5.0.3 - SDK 10.6 (2014-03-20) [Support]

    Scorch: Unknown - SDK 10.2 (2013-09-21) [Support]

    JavaAppletPlugin: Version of Java 8 update checking 51 (2015-08-01)

    The internet user Plug-ins: ⓘ

    WebEx64: 1.0 - SDK 10.6 (2013-04-27) [Support]

    Stamps.com: 1.1.12 (2013-06-20) [Support]

    The Safari Extensions: ⓘ

    iTube Studio - iSkysoft Studio - http://www.iskysoft.com (2012-07-02)

    3rd party preference panes: ⓘ

    Flash Player (2016-04-15) [Support]

    Flip4Mac WMV (2007-10-08) [Support]

    Java (2015-08-01) [Support]

    Time Machine: ⓘ

    Time Machine not configured!

    Top of page process CPU: ⓘ

    10% Dropbox

    9% WindowServer

    8% kernel_task

    7% adobe CEF Helper (2)

    3% codesign

    Top of the process of memory: ⓘ

    Kernel_task 799 MB

    582 MB firefox

    336 MB mdworker (20)

    Dropbox 229 MB

    ITunes 229 MB

    Information about virtual memory: ⓘ

    21 MB of free RAM

    7.98 GB RAM (2.57 GB being cached) used

    131 MB used Swap

    Diagnostic information: ⓘ

    June 18, 2016, 09:16:20 AM/Library/Logs/DiagnosticReports/Adobe InDesign CC 2015_2016-06-18-091620_ .hang [deleted]

    / Applications/Adobe InDesign 2015/Adobe InDesign 2015.app/Contents/MacOS/Adobe InDesign 2015 CC CC CC

    June 18, 2016, 09:16:19 /Library/Logs/DiagnosticReports/firefox_2016-06-18-091619_[redacted].hang

    /Applications/Firefox.app/Contents/MacOS/Firefox

    June 17, 2016, 14:15:57 ~/Library/Logs/DiagnosticReports/Adobe Flash Player install Manager_2016-06-17-141557_ [redacted] .crash

    com.Adobe.flashplayer.installmanager - Applications/Utilities/Adobe Flash Player install Manager.app/Contents/MacOS/Adobe install Manager of Flash Player

    June 16, 2016, 13:48:15 /Library/Logs/DiagnosticReports/firefox_2016-06-16-134815_[redacted].cpu_resour ce.diag [details]

    I have no idea what you have tried, but your HARD drive is suspect.  Start 4 option on the partition recovery and in the menu select disk utility.  Run disk utility > first aid > repair.  If the HARD disk is not repairable the disc must be replaced.

    Ciao.

  • new 2015 macbook pro 13 very slow internet

    I'm new to mac and have always had a pc. I took the plunge and bought the new macbook pro 13 and everything was fine for a few days, but suddenly, the internet has become very slow. I thought maybe it was my connection, but other devices in the House Internet works perfectly, including ipads, iphones and even my old pc 10 years of moms. I have tried different browsers such as safari and chrome, but all are all too slow take up to 30 seconds to load a single Web page. Please can someone help me with this problem?

    Please download and install EtreCheck from http://etrecheck.com/

    Run it and post the report here.

  • My macbook pro is very slow, and often stuck mode programs "not responding".

    MacBook Pro (13-inch, mid-2012)

    Intel Core i5 2.5 GHz processor

    4 GB DDR3 memory at 100 MHz

    500 GB of storage capacity SATA disk

    Operating system OS X El Capitan 10.11.3

    It is very slow to start, in addition to open programs, for example, Mail, Safari, Word, Adobe Reader. Sometimes it can't even open programs and gets stuck in mode "not responding". I feel like a memory problem.

    Download and view a report of Etrecheck:

    http://www.etresoft.com/etrecheck

    Ciao.

  • My MacBook Pro is very slow.

    I opened my MacBook yesterday to clean dust then after then when I start it, it takes too long so usually opened. It is also very slow under normal conditions of use. Then it's a hardware or software problem? Please help me with this.

    Run this test and post the results here.

    http://www.etresoft.com/etrecheck

  • Disk defrag works not, taskmanager no opening, very slow downing load anything

    I've had problems with my computer for a while now and I don't know what else to do now, I'm trying this.  I sent this computer in Bridge 2 times now and this looks at what could be the third if I can't get all the answers.  The problems I have been having always start when I first try to defrag my computer.  It takes forever to defragment. I started it at 09:00 and it was not yet done at 20:00. I finally stopped him at 21:00 and it just sitting there like it was stuck.  now my task manager does not open and I can't get this thing to download something, including the microsoft fixit tools.  I am very frustrated.  I downloaded all execept serivce Pack 2 updates and this thing is everything to date.  any help would be great.

    Installation of the Service Pack 2 - that is where I would start. You say that you have downloaded all the updatesexcept this one, so with that one being later, it should correct a little (apart from a virus, etc.). An application that will help you realize what lack us isBelarc Advisor . I love it, because it produces a file html (on your own computer), and once it loads in your browser, you can print it out and have a list of all installed on your computer - and it includes what Microsoft Updates are installed and missing, with the version numbers for all of this. And it's free. :-)

    I'll make sure that Windows Defender runs, as a bare minimum (I thought Windows Security Essentials, being in agreement, but I uninstalled it because it made my Vista boot slowly and returned to the Defender). Vista is quite safe, however. If you buy a commercial product, I recommend Kaspersky (I don't use it myself, because I download a lot and I'm careful, but my mother has it on his computer and she's in all Big Fish Games and so on and got a nasty on her own a bit... virus) Until Kasperky was installed and took care of that - now it catches everything (so far)).

    Virus and others can make Windows run slowly. I've seen all kinds - some file after file replication, increasing the number and size of the files, the names of some really stealth and switching. But if it is not a virus that slows down your computer, it is really likely to be fragmented files. In this case, I would recommend Auslogics Disk Defrag . It's free and FAST.  You can defragment with a new and also OPTIMIZE files so that things run faster. Any defragger will take more time with the bigger hard drives. Windows Defrag takes too long. So doesn't the defragmenter in Advanced SystemCare 3(so uncheck the Defragmenter option if you run this, BUT I recommend highly this program because it will clean a lot of things for the better - remember do not check the boxes in the window popup resulting for the module of security... unless you know what you're doing , because not all these (Browser Helper Objects, etc.) are a problem. This program also includes a fixer shortcut, an application that allows you to see what programs are running at startup and much more. One of the best I've seen, and I used it for a few years now without a problem.

    These last two linked above will go a long way toward acceleration and optimization of your system. I run these two first and then restart. SystemCare has three main sections of things that can be run - she is really well organized. It "takes the trash", in other words. :-) It will get rid of unwanted files and increase the speed and solve common registry problems (something I was initially uncertain about when I got it, but after a few years, it was no concern - it cleans things upwards, and unlike other programs of registry).

    Another possibility: according to how you have set aside for virtual memory, if you get close to maxing out your hard disk space, you might find yourself in a situation where the computer is both need to write a lot on the drive and need more space, or space dedicated to virtual memory (I call it "the garbage area" where she must write and write about things older in this area) (as things are processed - this is temporary memory). Bottom line: If you are short on space and don't know what to do about virtual memory (and people use virtual memory to compensate for the fact that they do not have a lot of RAM |) Memory to play with), then let the system choose automatically the drive. To set it, you go to computer (aka My), right click and select Properties, and then when the system properties, click Advanced, then settings of Performance, then advanced once, then, virtual memory, select change. You can select automatic for ALL your drives, OR that the management system of the size for the selected drive. All readers do not have to have it, but whatever you select whether by car, it will create this sandbox of virtual memory paging on the same drive. Editing plan that will be used by the system to write things. Check the recommended size it compared to what is currently assigned. To play it safe, go with the recommended or let the system handle. Virtual memory can increase the speed and performance.

    I hope that these things help with some of your speed issues.

    (Note: the not not opening Task Manager, tells me that it might be a virus on your system, in which case you could look in these free programs:EMCO Maleware Destroyer andEmsisoft Anti-Malware (formerly A2 Squared) (full analysis is thorough and takes some time, but there is a quick analysis).) Lavasoft Adware, SpwareBlaster, Spybot Search & Destroy are also good.

  • W7 Ent. SP1 x 64 clean install on the new PC - very slow to load after reboot during installation

    Hi all

    I'm busy to install W7 Ent. SP1 x 64 on two computers for a small organization non-profit of my friends, all the similar Assembly (motherboard: ASRock H81M-VG4, CPU: Intel Celeron G1840, transcend SSD). The first PC went perfectly, no problems with the installation at all. Now, I installed the second, but unfortunately the following happens:

    After restarting the installation, was asked to enter the name of the computer normally, and then to set up a password. When I clicked on next (and leaving the word password empty) the whole process seems to freeze a little, and then after a few minutes, I could choose settings updates, after which everything slowed even further. "Finalizing settings" took about three quarters of an hour. Once this done, all slowed even more, and it now displays a black screen telling me that this is not a genuine copy of Windows (had no chance to fill in the key product of course) and after about half an hour he is now "configuration of settings customized for xxxx".

    -EDIT - Windows has begin once (between my opening message and my second post), and it was terribly slow in everything that (like several minutes before opening anything). I installed the LAN driver with the idea of updating all the drivers, but after a reboot it is so late it now already taken 10 minutes to boot Windows (and is suspended in the Welcome screen again).

    I've done an another clean install after using DISKPART to format the SSD, but the same thing is happening again once unfortunately. I installed on a USB bootable, I used to install two other computers as well (one before this one and the other afterwards), and everything is fine with those. Swapping the RAM module for a good known has not changed the situation.

    All comments are welcomed, appreciated, thanks.

    All other essential drivers have been installed: video, Chipset?

    Try the SSD at the other system and see how it starts in the system causes problems.

    Also try the SSD with the painful installation in this computer to see if the problem persists.

    Could contribute to isolate if the SSD.

  • DIAdem v11.1 SEEN very slow to load pan and zoom 2D graphics axis

    As for the user KJ2, I find DIAdem version 2011 very slow when loading the data in the display.

    I have two laptops, a DIAdem 2010 operating and the other the new 2011. IAM loading the same PDM file into two versions.

    The 2010 takes more time initially to load the data in the browser window, but it is almost instant when zoom and pan in the display window.

    Load the file instantly in the browser of the 2011, but then takes an age to zoom and pan, which is very frustrating when the analysis of the data.

    I can improve performance at the 2010 level if I load the data with an interval of small applied reduction (factor 2) - once again, it takes much more time to load in the browser window, but is now usable in the view window.

    The only problem now is that all channels are renamed with the Appendix "sample".

    I guess that's a result of the new feature 'optimised loading data' which I guess is only load the data when I need IE when zooming and panning in the display!

    Help please, before I resort to re - install 2010!

    Karoline

    Hello Albert,.

    It is a relatively easy solution:

    In the BROWSER, go to the menu "settings":

    In the dialog box that is displayed, change the setting of data "always load in bulk.

    Alternatively, you can also change this in the dialogue box "parameters: compatibility", but I don't know what is the difference between these two methods.

    Hope that helps, no need to return to the 2010 version after these changes. Oh and don't forget to save your configuration file after making the changes to make them permanent!

    Otmar

  • my Macbook Pro Very Slow error loading, error, Trackpad trolling Kernel_task bar

    HY sorry my bad English...

    I searched google but couldn't find a solution... I use macbook pro 2011 13 inch 2, 4 GHz core i5 standard end

    Why my macbook pro late the trackpad, kernel task error and loading very slow bar sttartup, but this problem is not in safe mode, with all the normal safe mode

    measures have I made:

    -change the hard drive

    -change the disk sata hard

    -battery change

    -change the trackpad and trackpad cable

    -change the OS 10.6, 10.7 10.10, 10.11

    -change model point via

    and unresolved problen my macbook very very slow loading bar (it also occurred when I first started by flashdisk and in Setup mode in ulities OSX as a kernel error task late trackpad) sometimes the trunk sometimes will not start and if I change the SID model that works, but when booting from flash for a long time

    is there a solution that is more useful? very confused i

    0o0o

    If it doesn't happen in Mode safe, there is probably a software problem. Can you post an Etrecheck report? http://etrecheck.com/

  • Memory - Macbook Pro 2011

    Help, please! I have a MacBook Pro 13 inch end 2011. I want to upgrade the memory of 4 GB (2 x 2 GB) to 16GB (2 x 8 GB).

    Can I buy 16GB and they say it's for the MacBook Pro 2011, but it says on the site of Apple 8GB maximum memory.

    Everyone is running 16GB and it works fine?

    I upgraded to El Capitan, and my mac seems slower.

    Back in 2011 8 GB SODIMM costs $1000 + if they still existed.  Apple tested the SODIMM 4 GB at reasonable price and never reviewed the hardware older after 8 GB SODIMM fell to $50.

    I run 16 GB Crucial in my MBP 2011 very well.  Crucial or OWC (macsales.com) sell RAM reliable and provide guarantees for life.

  • It is possible (and useful) to upgrade my Macbook Pro 2011 (early)?

    My Macbook Pro 2011 (start) 13 "has served me very well. I took the approach to resist many updates over the past 1.5 years).

    However, in the last 6 weeks, it really began to slow down. I'm not too keen on the storage in the Macbook Pro 2015 options so not sure I want to buy immediately. I have never tried to upgrade the macbook - so I don't know how easy/possible/useful it is to do. Here is my card... can someone tell me if this can be improved and if so, if she's worth ($-wise)?

    Intel Core i7 2.7 GHz

    4 GB 1333 MHz DDR3

    Intel HD Graphics 3000 384

    Free GB 498 296 GB

    Contains 2 memory slots, which each accept a DDR3 1333 MHz memory bar. Each unit already has 2 GB.

    No game - I use it mainly for work (freelance marketing/communication - writing, presentations, artistic director) and the House (photos/home movies, internet, backup of the device).

    Slow down especially occurs in switching between programs, using products MS - sometimes opening and closing old/new docs. Internet connectivity usually ok but slow switching between windows in Safari.

    Any suggestions, help would be very appreciated. I want to take a decision quickly before it begins to die.

    Download and view a report of Etrecheck:

    http://etrecheck.com/

    Who will offer a snapshot of your MBP and may disclose certain elements that could hinder performance.

    Ciao.

  • El capitan 10.11.3 very slow to open anything.

    I just 'upgraded' from 10.7.5 to 10.11.3.

    This slowed my MacBook Pro (2010) by doing anything.

    I had TO update because I bought an iPhone 6 and she needed a newer version of iTunes.

    Now, the MacBook is very slow to open anything - 'pages' 'number' ' safari - and Web sites.  Strangely, once in a website, it's normal, he's going from page to page as fast as before.

    Can anyone help please?

    As you have made the leap from an older operating system by, is it old software that requires an update to function properly.

    Also, you have enough RAM, the specifications for El Capitan said 2Gbs but 4Gbs is more realistic and of course more IS more.

    You have applications that start at the start of Mac, maybe you don't need them running.

    Anti Virus and 'cleaning up' apps are not necessary.

    You can download this small http://etrecheck.com/ application that checks your system and then paste the report here

    then folk can take a look and perhaps draw some conclusions as to why it is slow.

  • Snow Leopard to El Capitan on Macbook pro 2011

    Hello world

    I run a 2011 Macbook pro under Snow Leopard and need to update to El Capitan because of my iPhone 5 that runs on iOs 9.
    Question?

    Should I upgrade to El Capitan or keep Snow Leopard?
    Is anyone doing this update already on a similar mac?
    I heard that it would be possible to partition the drive and use the two Os x. My concern is that my macbook pro would be slower, it works perfectly fine at the time or perhaps the risk of overheating due to the upgrade?
    And of course, I could lose valuable software like Xpress, my Adobe CS5...

    Sorry for the many questions but I have not found answers on the forum yet.
    Thanks in advance.

    Florian

    (1) keep SL, but use El Capitan on the same drive or on an external boot disk.

    (2) others have, and it is possible.  I did not, but I'm a bit of a killjoy.

    (3A) Yes, it is possible.  I would advise, so you can keep your software that will be useful if - I don't you am not mocking, I understand very well keep working software.

    (3B), it may be a bit slower.  If you have less than 16 GB of RAM (you can run that much) the effect could be a little more pronounced.  If you only have 4 GB of RAM, you need to upgrade RAM first IMO.

    (3 c) don't worry overheating.  Fan CPU/controls is sophisticated enough to keep things working, as long as you do not block the main back-vent.

    Path, you can follow:

    (1A), you can partition using disk utility, but you should have a very good clone/backup before doing just in case a very rare event of bad things.  You also told us not how big your current drive is and how you have used.

    (1B), you could get an external 2.5 drive and I suggest that you get an external Universal connection kit for $15 fix any bare drive.

    (2) you can download the installer from El Capitan, but out of the automatic "starts to install.  Then copy the installation application to another location of re - later use these packs to remove critical package "in-house" at the end of installation.

    (3) If you have a second drive of clone of your current system (my preferred method), you can upgrade this clone, while keeping intact internal drive and startup just externally for iPhone operations.

  • In order to get updates of Firefox, I need to install El Capitan.  El Capitan work well on a MacBook Pro 2011?

    Have a 2011 MacBook Pro, just received a message from Firefox saying that they support is more Yosemite 10.10.5 in a few months (updates, security updates etc.) and I need to improve my ios.  Question... are there problems with El Capitan on a MacBook Pro 2011?  Thank you

    not that I've heard of. You will need to make sure that you have at least 4 GB of ram on board, except that you should be good to go. Log in the App store, grab a copy and follow the instructions on the screen. You may need to reboot at least once...

    Good luck

    JB

Maybe you are looking for

  • 2 boards of different USB DAQ in parallel

    Hello I have 2 x USB-6210 on 2 x USB ports on my laptop.   (Windows 7, Labview 2010). My goal is to synchronize these two boards. I put the same voltage (50 Hz) sine signal on their first input channel (AI0), to have and to see them in the same graph

  • Downloaded the file to printer to help performance

    Downloaded from windows update for my printer and now the printer does not print anything

  • WRT300N - suddenly disconnected from the internet

    I have a WRT300N that has been configured and works well in a DSL connection - no login/password. Suddenly leave 15 days back, I lost the connection.  The IP address is assigned for my computer equipment and wifi (198.162.1.1...), and the Proxy addre

  • Installation of MediaNet.

    I just installed jabber 9.2.1 on Windows 8, but when I tried to install the Medianet service, I get an error saying that the installation ended prematurely. It works with Windows 8? Steve.

  • DMM 5.1, Initial setting

    Just plugged the new server to the DMM and went through the Setup, but it does not promt for the configuration of the video portal.  We tried to connect via the web browser and cannot.  Not sure we we had bad shot?