MacBook Pro crashed are unable to restore the system.

Similar Questions

• My home edition vista is continually updates configuration and then close. I can't stop it. I want to slate and wipe the hard drive but are unable to restore the system.

  How do I do a system restore with Vista Home basic when it is stuck on configuring updates?

  Hello

  You shouldn't have a system restore to fix this.

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista/Windows 7 with the Windows installation media and use the repair feature

  How to do a startup repair in Vista and Windows 7
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the system - Vista Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  This tells you how to access the system - Windows 7 Recovery Options
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to do a system restore in Vista and Windows 7
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a disk of Vista or Windows 7.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• RDPCLIP. EXE missing startup file (system32 dir). Unable to restore the system because of missing file unspecified.

  Windows 7 (new machine, not updated). Autoruns shows this file RDPCLIP. EXE be found at startup. This file is usually located in the System32folder. Unable to restore the system of time earlier because of unspecified missing file (rdpclip.exe?). System seems to be runnuing normally except these two questions. Occasional freezes (once just by renaming the downloads folder). How can I get
  new file restored to the version of Windows 7?

  Note: CLIP.exe is in the System32 directory.

  Hi bigdome6984,

  If your machine acts as a Terminal Server, i.e. someone else connects to your computer using remote desktop, then rdpclip.exe will be loaded on your computer as part of the functionality of Server Terminal Server.

  RDSCLIP is loaded on the computer, allowing other machines to connect via Remote Desktop.

  It should be found at the following registry location:

  HKLM\SYSTEM\CurrentControlset\Control\Terminal Server\Wds\rdpwd\StartupPrograms

  Important Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756

  I hope this helps!

  Kind regards
  Gokul - Microsoft Support

• On startup, I get the following message: __Error C:\WINDOWS\cleamsat.dll the specified module is not found .__I am unable to restore the system to an earlier date and now everything is real slow loading.

  If anyone can help please let me know. I had a virus recently (antivir solution pro), which is now deleted. The message appeared from this point.

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem simply remove the startup message.
  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry
  .  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Pavilion DV6-3000 series - is unable to restore the system to factory State

  Hello

  Could you please help me with Factory System Recovery.

  I think I accidentally erased one of the three local disks (about 2 GB) with HP tools.

  Then when I used the HP System Recovery tool, the system told me that he did not find the files necessary for HP Recovery tool and offered me uses the compact disc of recovery with this tool. But I do not have this disc.

  Please provide me with instructions and files to the recovery of the factory system.

  Model: dv6 - 3082sr with Windows 7 x 64

  Thank you

  Alexander

  Hi Alexander,.

  There are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  Also, if possible, back up the folder swsetup which lie at the root of the C drive.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  Regarding the drivers etc, you must, if you were able to save the swsetup this will contain all the software installers and drivers for your laptop - if you were not able, drivers and software, you may need can be found here.

  Best regards

  DP - K

• MacBook Pro w Chrome unable to sign the free acct that I created 3 years ago

  I created and used a free acct once 3 years ago. Today when I login it takes me to a page saying that my profile is completed by 80% and looks like they're trying to sell me a subscription. It seems impossible to get any further in order to reach my contact list to call a Skype. Thank you

  Thank you - and Yes, that was the problem. I'm go to Skype via live chat help and a representative from there accompanied me through it. If anyone has the same problem see Skype help live chat and they can help you. Thanks for the tips!

• Unable to restore the system, possible hard disk problems

  I started to have a white screen on startup and could not go beyond the apple logo. I ran the recommended repairs but could not manage to detect the operating system if the recovery console could see everything fine. The console suggested a repair disk I ran, but it seems to fail and goes to a blank gray screen.

  I pulled the drive and back up the contents of my PC and noticed them were three partitions showing in this regard. There was no problem of backup files as well so it seems that the drive is ok. After plugging it back in I tried internet recovery option and it only detects the HD recovery. I tried to erase disk02 but it does not work as well. I also use the restore option, but this also fails. I'm more used to the windows system restore and I'm not sure just what I might be missing.

  I have attached the photos on what I see, so hopefully that will help.

  http://imgur.com/a/nsyx8

  Enter the Recovery > disk utility. Select 1 TB HD Apple ST *, and then click Delete. Then click the Partition tab use arrow on the "Current" bar and select 1 Partition. Below you see a + sign or Options and will make this is the Table of Partition GUID. You will be he title Macintosh HD and Mac OS extended (journaled) and then click on apply. Now, you'll see Macintosh HD instead of the disk 0 sec 2. Select Macintosh HD, and then click Delete. Now, you erase Macintosh HD. It should be GUID Partition Table Mac OS extended (journaled). You should be able to put it in to your Mac you install El Capitan. Hope this helps you.

  Bravo!

• OK so I connected my iPhone 5 s for my Macbook Pro with a USB cable, but the system settings it is NOT CONNECTED, even if it triggers iTunes to open. Do not get internet connection on the MAC how come the system settings shows USB not connected

  I connected my iPhone to my Mac using a USB cable, but the Mac connected USB not appear, even if iTunes opens

  The Mac has no network to the internet via a port USB, WHY NOT?

  Where in the Panel are you looking for? And what you're trying to do with the phone? Transfer files? Share an internet connection?

• After "critical update" 12/23/11, my computer is very slow and crashes, also will restore the system.

  After the "critical" update that is installed on my computer 12/23/11 my computer started running very slowly, he drove my Norton anti virus, blocking, I am unable to restore the system. any ideas?

  Hello

  1 update you installed recently? (Please mention the number of KB)

  2. which version of the Windows operating system is installed on your computer?

  3. what exactly happens when you try to perform the system restore?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Fix Windows system on slow Windows performance issues:

  http://support.Microsoft.com/mats/slow_windows_performance/

  Method 2:

  Start in safe mode and check if the same problem persists. If the problem not persists in safe mode, then turn on the computer in a clean boot state and check if that helps.

  Step 1:

  How to start in SafeMode in Windows 7: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  Step 2:

  Put the computer in a clean boot state, and check if that helps.

  How to solve the problem by running the clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 3:

  Check the installation update and try to remove the updates that you installed recently and then try to remove it and check if it helps.

  Remove an update:

  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  And also ensure that there are no pending restart, if there are any pending restart, then restart the computer and check if that helps.

  Hope the information is useful.

• Hello, I have CS5 on old macbook, the macbook is defective. I want to transfer the sweet to my new Macbook pro, what are my options?

  Hello, I have CS5 on old macbook, the macbook is defective. I want to transfer the sweet to my new Macbook pro, what are my options?

  You do not transfer the programs, you are doing a new installation

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

  You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

  .

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• I have 2 MacBook Pro, we are years and the other is 8 years old, I got photoshop cs2 on the former. After cleaning the disc hard I couldn't load the cs 2 on any of my laptops. Can I purchase an upgrade for it? I have all the DVDs, serial number and pack

  I have 2 MacBook Pro, we are years and the other is 8 years old, I got photoshop cs2 on the former. After cleaning the disc hard I couldn't load the cs 2 on any of my laptops. Can I purchase an upgrade for it? I have all the DVD, the serial number and packages, but I can't use it.

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

• My MacBook Pro Crash 2010

  Hi, Ive had this computer almost six years without any problems, but in the last few day, he started to plant about every hour. It is a 15 inch mid 2010 MacBook pro with 8 GB of memory and running OSX El Capitan 10.11.6. When it crashes the user performs different tasks.

  It's the panic since this accident in the morning

  Any advice in what may be the cause of the problem would be appreciated.

  Anonymous UUID: EA32FD66-A904-7C5E-30C4-61225E11CB9D

  Mon 5 Sep 10:07:48 2016

  Panic report *.

  panic (cpu 0 0xffffff7f9568ebd5 appellant): "panic GPU: 7f [< no >] 3 3 0 0 0 0 3: NVRM [0 / 1:0:0]: error 0 x 00000100 reading: CFG 0xffffffff, 0xffffffff, 0xffffffff, BAR0 0xd2000000 0xffffff912ee7a000 sControl-3.12.8/src/AppleMuxControl/kext/GPUPanic.cpp:127 P2/4\n"@/Library/Caches/com.apple.xbs/Sources/AppleGraphicsControl/AppleGraphic 0x0a5480a2, D0,

  Backtrace (CPU 0), frame: return address

  0xffffff911db0ac60: 0xffffff80124dab52

  0xffffff911db0ace0: 0xffffff7f9568ebd5

  0xffffff911db0adc0: 0xffffff7f931eefa4

  0xffffff911db0ae80: 0xffffff7f932bbadd

  0xffffff911db0aec0: 0xffffff7f932bbb48

  0xffffff911db0af40: 0xffffff7f93540a23

  0xffffff911db0b0b0: 0xffffff7f932dfb79

  0xffffff911db0b0d0: 0xffffff7f931f5cfd

  0xffffff911db0b180: 0xffffff7f931f3690

  0xffffff911db0b380: 0xffffff7f931f5141

  0xffffff911db0b450: 0xffffff7f94b5f6c0

  0xffffff911db0b530: 0xffffff7f94b5c9ef

  0xffffff911db0b5b0: 0xffffff7f94b5d597

  0xffffff911db0b630: 0xffffff7f94b5ddbb

  0xffffff911db0b770: 0xffffff7f94b5e817

  0xffffff911db0b8a0: 0xffffff7f94b9064f

  0xffffff911db0b8e0: 0xffffff7f94b913ba

  0xffffff911db0b920: 0xffffff7f94b8ad0a

  0xffffff911db0ba90: 0xffffff7f94b8b601

  0xffffff911db0bad0: 0xffffff7f94b86e49

  0xffffff911db0bb00: 0xffffff7f94b6a30b

  0xffffff911db0bb50: 0xffffff8012ae2352

  0xffffff911db0bb80: 0xffffff8012ae2fca

  0xffffff911db0bbe0: 0xffffff8012ae0037

  0xffffff911db0bd20: 0xffffff8012597f90

  0xffffff911db0be30: 0xffffff80124df2c3

  0xffffff911db0be60: 0xffffff80124c28f8

  0xffffff911db0bea0: 0xffffff80124d26a5

  0xffffff911db0bf10: 0xffffff80125b8eca

  0xffffff911db0bfb0: 0xffffff80125ecd86

  Extensions of core in backtrace:

  com.apple.nvidia.classic.NVDAResmanTesla (10.0) [05FC5D7E-BB0B-3232-BBBD-8A49B687 0D8B]@0xffffff7f93198000-> 0xffffff7f9340dfff]

  dependency: com.apple.iokit.IOPCIFamily (2.9) [5447B943-A94D-3BD4-A60F-98B24D19CE93] @ 7f92d2c000 0xffffff

  dependency: ffff7f93188000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [4EB2843C-C821-3AD0-B333-575FD6ED6FB1]

  dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [A360453D-2050-3C49-A549-AC0DD5E87917] @0 xffffff7f93141000

  com.apple.nvidia.classic.NVDANV50HalTesla (10.0) [CA 56199, 6 - 3C8D - 3EBB - B5EF - 7B1B467 8ACF9]@0xffffff7f93418000-> 0xffffff7f936c5fff]

  dependency: com.apple.nvidia.classic.NVDAResmanTesla (10.0.0) [05FC5D7E-BB0B-3232-BBBD-8A49B6 870D8B]@0xffffff7f93198000

  dependency: com.apple.iokit.IOPCIFamily (2.9) [5447B943-A94D-3BD4-A60F-98B24D19CE93] @ 7f92d2c000 0xffffff

  com.apple.driver.AppleMuxControl (3.12.8) [3186B630-FFF4-32C9-BAB9-DCD0C9DB6BA2] @ 0xffffff7f95680000-> 0xffffff7f95693fff

  dependency: com.apple.driver.AppleGraphicsControl (3.12.8) [C57F5F56-2229-365F-9765-F24AA4687 584]@0xffffff7f95678000

  dependency: com.apple.iokit.IOACPIFamily (1.4) [5D7574C3-8E90-3873-BAEB-D979FC215A7D] @0xfffff f7f92fb3000

  dependency: com.apple.iokit.IOPCIFamily (2.9) [5447B943-A94D-3BD4-A60F-98B24D19CE93] @ 7f92d2c000 0xffffff

  dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [A360453D-2050-3C49-A549-AC0DD5E87917] @0 xffffff7f93141000

  dependency: com.apple.driver.AppleBacklightExpert (1.1.0) [C49819CE - 729A - 36B 2 - 9AC1 - 744A43DC23 6F]@0xffffff7f9567b000

  com.apple.GeForceTesla (10.0) [07CD2F70-A8DD-32EA-85C0-90433204BDAC] @0xffffff7f94 b2f000-> 0xffffff7f94bfafff

  dependency: com.apple.iokit.IOPCIFamily (2.9) [5447B943-A94D-3BD4-A60F-98B24D19CE93] @ 7f92d2c000 0xffffff

  dependence: com.apple

  The cause of this kernel panic is the graphics card failure. The series of MacBook Pro 15 inch 2010-2011 with the discrete GPU has had a problem with defective graphics card. This is probably your case. Apple had a replacement program where the defective logic board has been replaced by a new one for free. It lasted for 3 years, but unfortunately now it's gone already MacBook Pro (15-inch, mid 2010) intermittent black screen or the loss of video quality program is over - Apple Support

  There is a similar thread for you to get more information what should I do when the intermittent black screen or the loss of video quality program is completed?

  In any case, I think that the best solution is to take your computer to the specialist of the investigation.

• MacBook Pro crashed. Fixed. How to get Firefox?

  MacBook Pro crashed. Hard drive wiped, reinstalled (OS 10.9.4). Restored data.

  Several app, such as Firefox, disappeared. Must I download again and start over?

  Go to www.getfirefox.com and download Firefox on your computer, and then install it.

  How to download and install Firefox on Mac

• I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update

  I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update itunes?

  Hi sonalnj,

  I understand that you cannot synchronize your iPhone as iTunes is requested it must be updated. I can help you with that.

  According to the technical specifications for a 6 s iPhone, you need a Mac running OS X v10.8.5 or later version with iTunes 12.3 or later. Because you are on OS X 10.6.8 your version of iTunes is up to date with this OS.

  iPhone 6 s Tech Specs
  http://www.Apple.com/iPhone-6s/specs/

  Now to fix that, you need to update your Mac OS X 10.8.5 Mountain Lion or OS X 10.11 El Capitan. If you want to go to the Mountain Lion, you can do it with the first link below. The cost will be $19.99 and a code will be delivered to you if you can download it via the Mac App Store. Once you have upgraded, be sure to make all software updates to go with him to get the latest version of iTunes.

  OS X Lion mountain
  http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion

  Now the other option is to move to OS X 10.11 El Capitan, and is a free update that you can do right in the Mac App Store, if you meet the system requirements. Take a look at the following article for more details on how to do it.

  Update of OS X El Capitan
  https://support.Apple.com/en-us/HT201475

  Nice day!

• How to remove the trial version of Acrobat DC 30 days that I have somehow on my MacBook Pro?  I don't want the dang thing, and it prevents me from using my Acrobat Pro 11 software.  Trying to access using the tree without end of support for Adobe is reall

  How to remove the trial version of Acrobat DC 30 days that I have somehow on my MacBook Pro?  I don't want the dang thing, and it prevents me from using my Acrobat Pro 11 software.  Trying to access using the tree without end of support for Adobe of really making me cranky.

  Hi thomh65004143,

  You simply drag the Acrobat DC application from the applications folder to the trash to uninstall.

  Then restart your system & install Acrobat XI Download Adobe Acrobat products. Standard, Pro | DC, XI, X.

  Let me know if you are still having a problem.

  Kind regards

  Nicos