MacBook Pro + Thunderbolt display vs VMWare Fusion

Similar Questions

• MacBook Pro & Thunderbolt Display

  If I understand this correctly:

  7 is the Thunderbolt port power devices connected?

  Yes. A Thunderbolt port powers if this Thunderbolt port is part of a device that is connected to a power outlet or is running on battery power. If your Thunderbolt devices have their own power supply, you must connect the power supplies to them for optimal functionality. If you use Thunderbolt devices that get their power that from the Thunderbolt bus, computers running on battery power will be draining the battery faster.

  Then, if the screen is connected to a MacBook Pro power will be provided BUT is a supplied cable (w/Display) for the connection of the screen with the MBP, or is it necessary to buy it separately?

  According to http://www.apple.com/thunderbolt/, it can provide 10 W. That's enough for hard drives and other small devices.

  Displays generally take 100 W or more. So, you will want to connect the screen on the seizure of power.

• MacBook pro retina display (mid-2012) goes black

  All by using the computer to randomly screen goes completely black.  After a few attempts at tapping trackpad or a bite or two, screen turns on but then log on to the computer. Program I was running is still there and continues on. It is very random and I fear that a logic board or the video card component may be out.  MacBook Pro retina display mid-2012, 16 GB 1600 mHz DDR3 RAM, graphics NVIDIA GeForce GT 1024Mo of 650M;  2.6 i7 running OS 10.11.2

  Hi James,

  Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your MacBook Pro. I'm a bit ambiguous on the screen exactly who you see when you log in, but according to your description it looks that your computer may be involuntarily go to sleep. If this is the case, you can find the troubleshooting steps in the following article useful:

  If your Mac does not sleep or wake up when expected - Apple supports

  As mentioned in this article, another possibility on laptops like the MacBook Pro is that the screen closed sensor may be triggered unintentionally. There is a small magnetic sensor in portable computers and sometimes, being close to things like briefcases magnetic closure or magnetic jewelry can cause him to think that the display was closed, which then puts the machine in a locked sleep state. If possible, you can test the issue on an office open without any potential source of interference.

  Magnets in devices could cause sleep your Mac computer - Apple Support

  See you soon

• Connection 12 '' Macbook to Thunderbolt display does not work (USB - C for HDMI / Lightning)

  I have connected a retina 12 '' Macbook to a Thunderbolt display via two adapters, and no video is coming through.

  Here is what I use:

  1 USB - C for HDMI: (Apple USB - C to HDMI adapter)

  2 HDMI to Thunderbolt (Monoprice adapter)

  Any ideas what's happening? The Thunderbolt display is without a doubt, since power is to come via USB when I plug my phone directly on the back of the monitor. The Apple adapter works because I could try to connect directly to a LG monitor with HDMI ports.

  The present model 2015 MacBook 12 inch Retina does not support the Apple Thunderbolt display

  what I read.  The other models Apple Cinema can work if they are used with correct adapters

  as other brands. Some adapters support the audio, while others do. Note there is

  limits for the specifications of display supported; This can limit their usefulness if it is not better configured.

  Special adapters and cables can allow to configure some display options for use with the MacBook.

  The graphical support through MacBook, MacBook Air, MacBook Pro varies with the specifications.

  The absence of a Thunderbolt port, use of adapters to provide only what it can bear MacBook 12 plug-in software component.

  and the mini-display port cannot connect or transfer at frequencies Thunderbolt usage views. The

  cure should be taken as built-in support for this; If the adapters could carry signals. A new model

  could understand such an improvement; but there is nothing of this specification in the Apple Store again.

  • Use 4K views and Ultra HD TVs with your Mac - Apple Support

  Bolt of lightning • ports and poster: frequently asked questions (FAQ) - Apple Support

  • Get help with graphical problems on external displays connected to your Mac - Apple Support

  Good luck & happy computing!

• MacBook Pro retina display bug?

  I don't know how to submit a bug report, so I post the problem here. Can't move the mouse outside the window of computer virtual and the movement of the mouse is extremely slow and erratic when you enable the full resolution for the retina display and set the size of text and other items to 200% in the control panel to Windows 7. Everything works as it should with 150% but as soon as you change to 200% (which is a must work on a MacBook Pro with the retina display) the problem starts immediately. I have a MacBook Pro with the retina with Mac OS X 10.8.1 and Fusion 5.0.1 and Windows 7 with SP1. Everyone has noticed this annoying problem?

  Turn off the power of the shadow of cursor. On 192DPI, shadow strength slider the slider made software, that really seems to shake the ease curve smile fusion.

  For some cursors generally less crappy, please take a look at:

  http://kaizoworld.deviantart.com/art/Windows-7-high-DPI-324612252

• Retina MacBook Pro + Cinema Display = 25% of the images visible when open

  Every time I opened a picture, I see only 25% of it. I type Cmd +, Cmd - to zoom in & out each time. This is ridiculous. I think the problem might have something to do with the fact that the retina display has twice the density of pixels. It's just a theory, but I would bet money that he is the culprit. I just realized that the problem does not exist when I don't have my external monitor plugged.

  Here's what I see on the monitor external 27 ":

  

  Then after hitting Cmd +, Cmd-, that's what I see (this web form has reduced this image, but you get the gist):

  

  Can someone tell me please how to avoid this maddening problem? I contacted the Support Adobe technique, and they cannot help me with this problem. They gave up; they simply ignore my emails at this point.

  I use the latest version of Photoshop CC on a fairly new 15 "MacBook Pro retina with a 27" no - Thunderbolt Apple Cinema Display.

  
  Thank you

  Matt

  Thank you! I was able to reproduce the problem by using a Setup dual monitor as you have described. I logged it in our database of bugs for a developer can take a look. Looks like Photoshop is confused when it comes to the scaling of the image correctly to fit the screen while you work with a retina and monitor non-retine. The only solution I have at the moment is to use the command-0 to force the image to fit the screen. I know that's not a great alternative to what you already do, but it is a minus button.

  I also found that I got better results if I switched to tabs - sometimes opens the first image zoomed in, but after that, they would hold on the screen. If you can fit it into your workflow you can try it.

• 2016 12 '' MacBook Apple Thunderbolt Display retina?

  Just got a new 12 "retina MB. Is it possible to connect it to an Apple Thunderbolt Display Monitor?

  Unfortunately, the MacBook was only a USB - C port, and Apple Thunderbolt Display Monitor requires a Mac with Thunderbolt to work, so you can't use it.

• Not able to MacBook Pro Retina Display nvidia graphics card

  Hello

  Why I'm not able to see nvidia as a graphics card for MacBook Pro with the Retina display.

  MacBook details below. Your help in this regard is highly appreciated.

  Thank you

  gis_abc

  Model: MacBookPro11, 3, MBP112.0138.B15 of BootROM, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, MSC 2.19f12

  Graphics card: Intel integrated Iris Pro, Intel Iris Pro,

  Graphics card: NVIDIA GeForce GT 750 M, NVIDIA GeForce GT 750 M, PCIe, 2048 MB

  Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 134), Broadcom BCM43xx 1.0 (7.15.166.24.3)

  Bluetooth: Version 4.3.6f3 16238, 3 services, 18 aircraft, 1 incoming serial ports

  Serial ATA Device: APPLE SM0512F, GB 500,28 SSD

  USB device: Memory card reader internal

  USB device: USB OPTICAL MOUSE

  USB device: HUAWEI Mobile

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB device: Apple keyboard / Trackpad

  Bus crush: MacBook Pro, Apple Inc., 17.1

  I do not understand your question.  Is the information that you have posted on your Mac

  Graphics card: NVIDIA GeForce GT 750 M, NVIDIA GeForce GT 750 M, PCIe, 2048 MB

  Have you looked at "System Profiler" or "System information" applications-> utilities?  Under "Graphics/displays" in the left column.

  You can try to play with gfxCardStatus

  <https://gfx.io/>

• CS4 on macbook pro retina display

  Hello, I just downloaded (purchased about 2009) CS4 on macbook pro (2015) with the retina display.  Perhaps because CS4 is old, when I ope PDF using acrobat pro that came with CS4, PDF content looks blurry (the same PDF document opened by a snippet that came with macbook pro shows very strong police force).  Do you know what I can do about it?

  Also, do you know if I can improve more current CS4 CS5 or CS6?  How to upgrade my CS4 is?

  Thank you

  CS4 is old enough that I don't think that there is nothing you can do to improve the display

  CS5 is no longer marketed, and CS6 no longer upgrade pricing

  In fact, as much as I know, same-CS6 won't do well on a modern screen 'high resolution '.

  All development efforts now targets Cloud programs, which are available by subscription

• 4.0 ai2: Fuzzy text on MacBook Pro retina display

  All text (code editor and IDE UI) made in SQL Developer 4.0 EA1/2 appears blurry/fuzzy on a retina display MacBook Pro in 1680 × 1050 15 "scale.

  Oracle SQL Developer 4.0.0.12

  Build HAND-12, 84

  The IDE version: 12.1.3.0.41.67.11

  Oracle IDE 4.0.0.12.84

  Java (TM) Platform 1.7.0_25

  The text is clear and sharp on SQL Developer 3.2.

  Oracle SQL Developer 3.2.09

  Build a HAND - 09.30

  The IDE version: 11.1.1.4.37.59.48

  Oracle IDE 3.2.09.30

  Java (TM) Platform 1.6.0_51

  Mac OS X 10.8.5

  Hello

  There seems to be a bug in the JDK 7 and not specific to SQL Developer:

  JDK-8000629: [macosx] made fuzzy with Java 7 on retina display

  I found mention of this bug in a bug for Netbeans IDE and based on the information report there, it seems that the blurry text issue should be resolved with the latest version of the JDK7 (later 7u40 build b28). Could you please try to update the JDK and see if the problem is resolved?

  I'm really curious to know if the problem is resolved.

  Thank you

  Paolo

• How much to fix a MacBook pro Retina display? I dropped it once and the curved screen

  Hi a few months back I dropped my MacBook Pro 13 inch retina. The screen is folded and no indication on the screen. I have been using a hdmi to tv connection, but I want my old screen back. only I was wondering how Apple will charge for repair or is it preferable to simply consider other repair workshops too get offers.

  Thank you

  https://www.TechRestore.com/Mac/

  http://www.dttservice.com

  http://www.myService.com/MacBookPro.html

  https://www.iFixit.com

  http://www.PowerbookMedic.com

• my macbook pro retina display will not download large files

  I had this problem happen to me twice before involving 1gig zipped files or files unzipped pretending to be finished in the download bar. It shows for example 309,5 309,5, the loading bar does not disappear. I try to click on it and it tells me "this son is still downloading. So I get in my downloads folder, click on the contents of opened, I look for the file and click on it like that, it gives me the possibility of reactivation of the zip folder, I do this, then it gives me an error message saying "files are not completed. (I give him hours and hours to 'finish loading' and then try again)

  Then... This has been recently. The first file I wanted to download was the Creative Design Premium Adobe (I waited half a day until the next day for this download click again on it) that is given to me directly in the downloads section of the adobe.com site. I need to reinstall the software due to an unknown error (YOSEMITE LIKELY) anyway... I start downloading, it ends - but not really. Something is happening. So I try it on Chrome, same problem. So I try it on a PC - made. No worries.

  So far I have not seen this question arise with someone else.

  The zip in question file is .7z and 335.9 MB file and the creative design premium is a 3.76 GB .dmg. I am running Safari on a

  MacBook Pro (retina, 15 inches, end of 2013)

  10.10.1 Yosemite

  MacBook Pro, Mac OS X (10.7.5)

  Start in Safe Mode, no doubt also resets of LANDAU and SMC , and then restart your computer normally.   See if the problem clears.

  If there is no anti-virus or anti-malware tools installed, any improvement in performance, of cleaning cache, optimizers any system or other such tools add-on, remove all those who, according to the instructions of the specific package.   Try the download again.

  Try downloading on a different network.   If it is a company or a network of offices, there may be filters and monitors in place, which can cause problems with the downloads.

  If all else fails, after the release of Etrecheck, and we will look to the configuration and what is installed.

• Possible problem with the Macbook pro retina display 13 "

  Hello, good afternoon:

  I just bought a new Macbook pro 13 '' two days ago Retina and everything seems ok until I see a rare noise which is like a whistle of low volume. This happens regularly, but sometimes every 10-15 seconds. I detect it only when the laptop is in a vertical position for example when I'm laying in bed watching a movie. Can someone tell me what that could this noise be? In its normal position, my macbook does no rare noise...

  Thanks in advance,

  EXB

  Not to hear a noise of a rMBP from the end of 2012 13 "and have never heard strange noises.

  Because yours is new and under warranty, you can consider taking it to a local Apple store and have them diagnose what might be the issue.

• How to free more GB on computer laptop macbook pro retina display

  How to free up to several GB on my mac pro book, 15 "retina display? 251 GB I have only 95 GB of storage left. It shows that I have a lot of pictures in GB of storage & I tried to remove tons of pictures to a portable hard drive, but I still have a lot of pictures somewhere on my laptop which take a GB storage capacity. How do I free this storage upward space.

  You use iPhoto or some other app to manage the photos? How you are moving - where exactly?

• How to Lr3 and CS5 upgrade to be compatible with the new Macbook Pro retina display

  I think that Adobe recently released updates for Lightroom and CS6 that make them compatible with the retina display.   First of all, is that correct, and second, if I Lr3 and CS5, how to?   I know it's a stupid question.

  Annmaxine21 wrote:

  I think that Adobe recently released updates for Lightroom and CS6 that make them compatible with the retina display.   First of all, is this correct

  Yes, that's correct.

  The following includes support for the retina

  Photoshop CS6 13.0.2 (perpetual license) and Photoshop 13.1 (members of cloud)

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5448

  4.3 Lightroom (library modules and develop) http://www.adobe.com/support/downloads/detail.jsp?ftpID=5520

  Annmaxine21 wrote:

  If I Lr3 and CS5, how to?

  Either you pay for upgrade to Photoshop CS6 and Lightroom 4

  http://www.Adobe.com/products/Photoshop/buying-guide-upgrades.html

  http://www.Adobe.com/products/Photoshop-Lightroom/buying-guide-upgrades.html

  or can join you the creative cloud of a monthly fee and download the updates included in your subscription