MacPro end 2013 crashes randomly (panic)

Similar Questions

• Upgrade of RAM MacPro (end 2013)

  I have a MacPro renovated (end of 2013), and I'll update the RAM.  If I 2x16GB of RAM, does it matter which of the four slots I put them in?  And, is there an advantage to get 4x8Go instead of 2x16GB?  My thought is that if I get two sticks of 16 GB, I can always add two more down the road if I think that I need.

  Thank you

  Ed

  Yes, BUT:

  To date, 16GB DIMMS for these Macs is registered DIMM (they have an extra buffer registry on their products so that they will not overload the memory Bus).

  DIMM not Exchange and "friendly game with others. If you choose ANY DIMMs recorded, you will be forced to remove all DIMMS not saved to get everything working properly.

  The United States, OWC/MacSales has a program where they will allow you to sell a limited number of your old DIMMS for a little money when you buy them new.

  http://eShop.MacSales.com/tech_center/support/rebates/memory.cfm

  --------

  The traditional way of installing DIMMs has been to put the largest DIMMS in slots more small number. This Mac Pro (end of 2013 dark cylinder) requires no pairs, gets a slight edge of pairs in adjacent locations (i.e., 1 and 2 or 3 & 4), but the differential gap is very, very small and should not influence what you buy.

• Problems with El Capitan on iMac 27 "end 2013

  Hello. I had some problems with my end 2013 27 "iMac. The majority of my problems seems to be turning around not being able to wake from its slumber unless I hard boot the system. I am running the operating system more recent 10.11.3

  Sleep problems have started with my installation of El Capitan. I have reset the PRAM the SMC and have disabled the hibernation and Energy Saver preferences are set to never spin down hard drives or screen saver. Problem persists.

  I also experience unexpected freezes. When these occur usually, audio on my system continues (if listening to iTunes or in a video game, the audio keeps going) but there is no response from the mouse or the movement on the screen at all. key board does not respond and mouse is frozen. The last time I had it's happen I had a panic the kernel to reboot (see below for the report)

  I tried everything I can think of. I've scoured the forums on the internet for help and support. Im not sure if this is hardware or software related. I tried to unplug all of my devices - I have several hard drives USB and Thunderbolt. I have a second monitor connected via the bolt of lightning as well. This could be a video card problem?

  I have used the EtreCheck software and have gotten several things that make me wonder if it's the software however, it seems that somewhere I still have pieces of teamviewer lingering around, even if I had uninstalled the software and I can't find anything in the spotlight for her. Here is an excerpt of my report...

  Launch of Agents:

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist [failure] [Support]

  com.adobe.AdobeCreativeCloud.plist [failure] [Support]

  com.coupons.coupond.plist [loading] [Support]

  [ongoing] com.extensis.FMCore.plist [Support]

  [loading] com.oracle.java.Java - Updater.plist [Support]

  com.TeamViewer.TeamViewer.plist [failure] [support] [details]

  com.TeamViewer.teamviewer_desktop.plist [failure] [Support]

  Top of the process of memory:

  2.28 GB com.apple.WebKit.WebContent (15)

  2.21 GB mds_stores

  1.54 GB kernel_task

  467 MB softwareupdated

  393 MB Spotify Helper (2)

  Some things I noticed - I had questions on shut down the system. My computer completely sometimes turns. I have to force quit the finder or the dock still will remain open and prevent the closing down. If this happens, then I need hard closed by pushing the power button until the device turns off. My system is INCREDIBLY slow sometimes since the upgrade as well at el capitan.

  I had a few problems with the big Adobe applications as well - sometimes illustrator or photoshop does any open or apps say they are open in the dock and in the force to quit smoking, but do not show in the activity monitor. In this case I have to restart my system for most work. force quit does not help them.

  Sorry for the long post, but I have worked on Macs since OS7 and even worked in an apple store genius bar for awhile so I generally know what I can do to fix these but I can't get it probably remain fixed. I thought better to have as much information as possible. My next step is to reload the entire OS, but I have a lot of work here that I'm afraid to lose (even though I have several back ups via time machine and other copies on external drives)

  Any help and advice would be most appreciated!

  Thank you!

  Anonymous UUID: F83C5E07-71C2-E17D-65DC-8C631B76C5D0

  Mon Jan 25 12:21:24 2016

  Panic report *.

  panic (cpu 0 0xffffff800b5254ce appellant): "an element of the liberated area has been modified in the kalloc.128 area: expected 0xffffff803c0bd080 but found at the offset 0 128 in the 0xffffff803c0bdf00 element, 0xffffff803c4bd080, bits 0x400000 changed cookies 0x3f001131d5890016 0x53521f0c6426431"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.30.4/osfm k/kern/zalloc.c:503.

  Backtrace (CPU 0), frame: return address

  0xffffff82c89ab180: 0xffffff800b4df792

  0xffffff82c89ab200: 0xffffff800b5254ce

  0xffffff82c89ab270: 0xffffff800b524f76

  0xffffff82c89ab2b0: 0xffffff800b523c02

  0xffffff82c89ab3e0: 0xffffff800ba804db

  0xffffff82c89ab400: 0xffffff7f8d12b505

  0xffffff82c89ab440: 0xffffff7f8d12b6c7

  0xffffff82c89ab460: 0xffffff7f8d2328df

  0xffffff82c89ab490: 0xffffff7f8d25e96c

  0xffffff82c89ab4d0: 0xffffff7f8d25e4c6

  0xffffff82c89ab500: 0xffffff7f8d25e0f0

  0xffffff82c89ab540: 0xffffff7f8d3e71fc

  0xffffff82c89ab590: 0xffffff7f8d3dbf7a

  0xffffff82c89ab720: 0xffffff7f8d20d227

  0xffffff82c89ab7d0: 0xffffff7f8d14c1ac

  0xffffff82c89ab890: 0xffffff7f8d159c6d

  0xffffff82c89ab900: 0xffffff7f8d09025d

  0xffffff82c89ab970: 0xffffff7f8d0964e6

  0xffffff82c89ab9b0: 0xffffff7f8d13ea07

  0xffffff82c89abab0: 0xffffff7f8d098872

  0xffffff82c89abb50: 0xffffff7f8c8619c4

  0xffffff82c89abb80: 0xffffff800bab7ef8

  0xffffff82c89abbf0: 0xffffff7f8c861a2b

  0xffffff82c89abc40: 0xffffff7f8d098727

  0xffffff82c89abc90: 0xffffff800b7607d4

  0xffffff82c89abce0: 0xffffff800b758523

  0xffffff82c89abdb0: 0xffffff800b75873f

  0xffffff82c89abde0: 0xffffff800b9cf9d6

  0xffffff82c89abe20: 0xffffff800b988cab

  0xffffff82c89abe50: 0xffffff800b9ca37d

  0xffffff82c89abf60: 0xffffff800ba2a731

  0xffffff82c89abfb0: 0xffffff800b5f0a36

  Extensions of core in backtrace:

  (3.2) com.apple.iokit.IONetworkingFamily [35F05D83-F2EC-3047-8422-E65BAF0144B2] @0 xffffff7f8c859000-> 0xffffff7f8c885fff

  com.apple.iokit.IO80211Family (1110.26) [A7F70957-7DBC-39ED-ACA7-3A7BA653D115] @0 x ffffff7f8d041000-> 0xffffff7f8d114fff

  dependency: com.apple.driver.corecapture (1.0.4) [B80FBC9C-24F9-3399-B347-01816E4EDD46] @ fff7f8d017000 0xfff

  dependency: com.apple.kec.corecrypto (1.0) [D6E082B5-93B2-3FF0-AB4B-4AA310173CE8] @0xffffff7f8 c1e9000

  dependency: (3.2) com.apple.iokit.IONetworkingFamily [35F05D83-F2EC-3047-8422-E65BAF0144B2] @0 xffffff7f8c859000

  com.apple.driver.AirPort.Brcm4360 (1020.17.1a1) [1D44A63A - 83 A 8-335C-BBF5-62965766 1B93]@0xffffff7f8d11e000-> 0xffffff7f8d7dcfff

  dependency: com.apple.driver.corecapture (1.0.4) [B80FBC9C-24F9-3399-B347-01816E4EDD46] @ fff7f8d017000 0xfff

  dependency: com.apple.driver.mDNSOffloadUserClient (1.0.1b8) [DC173C97-9F4D - 39 d 5-8814-68B0BAD 27370]@0xffffff7f8cd42000]

  dependency: (1110.26) com.apple.iokit.IO80211Family [A7F70957-7DBC-39ED-ACA7-3A7BA653D115] @0 x ffffff7f8d041000

  dependency: com.apple.iokit.IOPCIFamily (2.9) [F398CE94-0FBD-3E8E-A7AB-55F7F05A81ED] @ 7f8bd1a000 0xffffff

  dependency: (3.2) com.apple.iokit.IONetworkingFamily [35F05D83-F2EC-3047-8422-E65BAF0144B2] @0 xffffff7f8c859000

  The process corresponding to the current thread BSD name: airportd

  Mac OS version:

  15 D 21

  Kernel version:

  15.3.0 Darwin kernel version: Thu Dec 10 18:40:58 PST 2015; root:XNU-3248.30.4~1/RELEASE_X86_64

  Kernel UUID: DECC9F02-27D7-31F0-9599-A9EF2873902C

  Slide kernel: 0x000000000b200000

  Text of core base: 0xffffff800b400000

  Text __HIB base: 0xffffff800b300000

  Name of system model: iMac14, 2 (Mac-27ADBB7B4CEE8E61)

  Availability of the system in nanoseconds: 67730969846

  last load kext to 62344320534: com.apple.iokit.IOBluetoothSerialManager 4.4.3f4 (addr 0xffffff7f8cf42000 size 57344)

  kexts responsible:

  com.seagate.driver.PowSecLeafDriver_10_5 5.2.7

  com.seagate.driver.PowSecDriverCore 5.2.7

  com.apple.iokit.IOBluetoothSerialManager 4.4.3f4

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

  com.apple.driver.AppleHDAHardwareConfigDriver 272.51.3

  com.apple.driver.AppleHDA 272.51.3

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.driver.AppleIntelHD5000Graphics 10.1.2

  com.apple.driver.AppleMuxControl 3.12.6

  com.apple.GeForce 10.0.8

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleMikeyDriver 272.51.3

  com.apple.driver.AppleBacklight 170.8.8

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleSMCLMU 208

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.AppleFIVRDriver 4.1.0

  com.apple.driver.AppleIntelFramebufferAzul 10.1.2

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.nvidia.NVDAStartup 10.0.8

  com.apple.iokit.IOBluetoothUSBDFU 4.4.3f4

  com.apple.driver.AppleUSBStorageCoexistentDriver 3.7.1

  com.apple.iokit.SCSITaskUserClient 3.7.7

  com.apple.driver.AppleFireWireStorage 3.7.1

  com.apple.driver.initioFWBridge 3.7.1

  com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit 3.7.1

  com.apple.driver.LSI_FW_500 3.7.1

  com.apple.driver.Oxford_Semi 3.7.1

  com.apple.driver.StorageLynx 3.7.1

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.driver.AppleSDXC 1.7.0

  com.apple.iokit.AppleBCM5701Ethernet 10.1.12

  com.apple.driver.AirPort.Brcm4360 1020.17.1a1

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.DspFuncLib 272.51.3

  com.apple.kext.OSvKernDSPLib 525

  com.apple.driver.AppleGraphicsControl 3.12.6

  com.apple.nvidia.driver.NVDAGK100Hal 10.0.8

  com.apple.nvidia.driver.NVDAResman 10.0.8

  com.apple.iokit.IOSurface 108.0.1

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.iokit.IOBluetoothFamily 4.4.3f4

  com.apple.driver.AppleHDAController 272.51.3

  com.apple.iokit.IOHDAFamily 272.51.3

  com.apple.iokit.IOAudioFamily 204.3

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.AppleGraphicsDeviceControl 3.12.6

  com.apple.iokit.IOAcceleratorFamily2 205,1

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleThunderboltEDMSink 4.1.1

  com.apple.iokit.IOAHCISerialATAPI 2.6.2

  com.apple.driver.AppleHIDKeyboard 181

  com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPOutAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

  com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  com.apple.iokit.IOUSBMassStorageClass 4.0.2

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

  com.apple.iokit.IOBDStorageFamily 1.8

  com.apple.iokit.IODVDStorageFamily 1.8

  com.apple.iokit.IOCDStorageFamily 1.8

  com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.driver.AppleUSBMergeNub 900.4.1

  com.apple.driver.AppleXsanScheme 3

  com.apple.iokit.IOFireWireSBP2 4.2.7

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  4.5.8 com.apple.iokit.IOFireWireFamily

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 5.1.0

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.iokit.IO80211Family 1110.26

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBXHCI 1.0.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417.2

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Unable to gather system configuration information. Model: iMac14 2, 4 processors, Intel Core i7, 3.5 GHz, 24GO, BootROM IM142.0118.B12, MSC 2.15f7

  Graphics card: NVIDIA GeForce GTX 780 M, NVIDIA GeForce GTX 780 M, PCIe, 4096 MB

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54343531533641465238412D50422020

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54343531533641465238412D50422020

  Memory module: BANK 0/DIMM1, 8 GB, DDR3, 1600 MHz, 0x859B, 0x435438473353313630424D2E4D3136464544

  Memory module: BANK 1/DIMM1, 8 GB, DDR3, 1600 MHz, 0x859B, 0x435438473353313630424D2E4D3136464544

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 111), Broadcom BCM43xx 1.0 (7.21.94.136.1a1)

  Bluetooth: Version 4.4.3f4 16616, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: APPLE HDD, 1 TB ST1000DM003

  USB device: USB 3.0 Bus

  USB device: Elements 107C

  USB device: Backup + Office

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB device: FaceTime HD camera (built-in)

  USB device: Keyboard Hub

  USB Device: Apple keyboard

  USB device: USB 2.0 Hub [MTT]

  USB drive: Microsoft Wireless Optical mouse¬ae 1.00

  USB device: External USB 3.0

  USB device: External USB 3.0

  USB device: My passport 0820

  USB device: My passport 0748

  USB device: FA GoFlex Desk

  Bus crush: iMac, Apple Inc., 23.10

  Please post the rest of the etrecheck report.

• Windows 7 Starter crashes randomly, closed hard solves the issue.

  Original title: blocks window

  I have stater Windows 7, when I start my computer laptop is beginning normly nothing the problem initially, but there automatically block in any time my system will totally freeze I can't do anything after that I have forcefully press the power button then reboot my system then it is labour good.i have kaspersky small office installed antivirus on my laptop security I've also done a complete analysis of the system but the result is no threat found and also complete analysis of the system of antivirus for malware but the result is no threats found s Malwarebyte so I don't know what the exact problem, I I also clean my drive temp and temporary internet files. so please help me.
  Thank you

  Hi Anish,

  I ask you to answer a few questions, so that we can diagnose this problem properly:

  1. have you made changes on the computer before this problem?

  Please refer to the following link and perform all the steps in the section: my computer hangs or crashes randomly.

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286/en-us

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

   

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  See the Event Viewer for the exact error message or code, and the cause of the problem. Please let us know the same thing.

  a. click on the Start button.

  b. Type in the Event Viewer, in the search field.

  c. this will bring up the box of Event Viewer . Click to open the Event Viewer.

  d. in the left pane, expand Windowslogs.

  e. click the application log and syslog, one after the other. Select the first event in the log, and then use the arrow keys to scroll down. Most of your event will be in training. Maybe you will see yellow warnings or errors in red. If you see a red error, you can double-click on it to bring it and copy the contents into a document.

   

  Please get back to us with the results.

• Printing of the .pdf of the 2013 project file will stop when the name of the file must be written. Project 2013 crashes. Anyone know what the problem is between 2013 project and Adobe Acrobat 9?

  Printing of the .pdf of the 2013 project file will stop when the name of the file must be written. Project 2013 crashes. Anyone know what the problem is between 2013 project and Adobe Acrobat 9?

  The family of products Acrobat 9.x passed in mid-2013 "end of Support".
  Using Acrobat 9 of MS Project via PDFMaker stops with Office 2007.
  To 2013 Office support, you must use Acrobat XI (11.0.1) or newer.

  A good reference:
  https://helpx.Adobe.com/Acrobat/KB/compatible-Web-browsers-PDFMaker-applications.html

  Acrobat Pro and Standard DC are what are currently available for purchase.

  Be well...

• MacBook Pro (15 inch, end 2013) with MacOS Sierra 10.12: kernel_task maxing out CPU with external display

  I have a maxed out end 2013 the MacBook Pro Core i7 to 2.6 GHz, 16 GB of DDR3 RAM, 1 TB SSD, NVIDIA GeForce GT 750 M 2048 MB, Intel Iris Pro 1536 MB.

  Also, I have a DELL P2415Q Display 24 inches (3840 x 2160) using Thunderbolt, are involved through the headphone jack and use a USB for lightning to recharge my iPhone.

  I upgraded to macOS Sierra the day he is released and had no problems until this morning. I unplugged my external screen and speakers and used my laptop for about 15 minutes, the battery, and then returned to my office and plugged my Thunderbolt, rear speakers display in and my CPU shot at 100% and never came back down. My Mac is essentially useless because kernel_task is eating all my CPU and to prevent another asks to enter the CPU.

  I have since audited equipment - everything was fine, reset the NVRAM and I tried to erase IOPlatformPluginFamily.kext .plist files but I couldn't on my Mac (trying to follow this guide, started in Safe Mode and everything then went to try and find the file and my Mac just does not have it). When my external screen is plugged if I'm doing anything CPU intensive (videophone, opening of Chrome, etc.) then my kernel_task gets mad again, and the only way to move is to unplug my screen. Connect my iPhone to charge the tips also my kernel_task as well. I followed my internal temperatures, and nothing was out of the ordinary, to cold currently at about 140 °.

  At this point, it seems that any time that puts something on the charging system and increase the temperature internal internal components of my Mac kernel_task maxes my CPU, which brings my Mac to its knees.

  Any ideas how to fix? Is this just a major bug in 10.12?

  Hi, Trent L.

  Try this - problems with macOS Sierra? This fix can help you.

  He got rid of all my macOS strangeness of the Sierra.

  Hope this helps,

  -BrainSel

• MacBook Pro 15 "end 2013 too slow performance

  Hello world

  My macbook pro 15 "end 2013 me294, Core i7 haswell 2.3 Ghz, 16 GB Ram, SSD PCI 256 GB, GT 750 m & Iris Pro.

  Geek of multicore benchmarks is too less to another macbook even type (me 294).

  It's my macbook: multi-core on 6000 landmarks

  https://browser.primatelabs.com/v4/CPU/337791

  https://browser.primatelabs.com/v4/CPU/337570

  This is another of the same type (me 294): multi-core on 12000 landmarks

  https://browser.primatelabs.com/v4/CPU/search?q=model: % 22MacBook % 20Pro % 20 (15 - h % 20Retina % 20Late % 202013 Inc.) % 22% 20platform:...

  I reboot before benchmarks, I don't know why?

  GeekBench is a crude tool that is useful for computers compare configured identically. Means "Identically configured" quite the same hardware running identically configured systems with identical changes, as appropriate.

  As says Geekbench works best when it is the only application running. Comparing the performance of your Mac to others requires the abandonment of all other open applications in addition to process who can have no user interface.

  To identify the processes that are running on your Mac in order to see how they affect the activity and performance of your Mac, use the activity monitor: use the activity monitor to your Mac - Apple Support.

• My mac pro end 2013 connecto to 3rd monitor used

  I just got a couple of monitors Samsung 4 K and I connected to my Mac Pro model 2013 end that has two graphics cards AMD over-pants D700. I also want to plug a 4 K TV to my installation in order to show the greatest screen previews for customers. I've separated the connections of each monitor in the ports of different buses, as shown in the Apple Web site. Both screens are connected via thunderbolt and the TV is connected via HDMI. The problem is when I plug the TV one of the monitors completely loses the signal. I tried to swap the connections of ports between the two monitors and the TV but the result is the same, the computer will only send the signals of two of the three connected. I would be grateful someone knows how to fix this problem, thanks.

  You said: "the two screens are connected via thunderbolt and the TV is connected via HDMI.".

  You say you have two screens Thunderbolt?

  If this isn't the case, which is entered on the monitors?

  If this isn't the case, entered ui displayport/mini displayport may be both legacy connections (DVI or HDMI). For more than two, you need an adopter active.

  Each device is connected to another bus Thunderbolt?

  See:

  Use multiple screens with your Mac Pro (end 2013) - Apple Support

• What happens with the Mac Pro (end 2013)?

  Hello!

  I'm Marc Urtasun, Spain. I have a Pro Mac (end 2013) with 3, 5 GHz 6-Core and two AMD over-pants D500. I am an artist and a 3d animator and I always work with 3d, made, video... and I need a more powerful computer now, because on the 3d, Mac users are moving to Windows due to the advantage of the GPU with CUDA...

  I would like to ask two things:

  -are planning an update or something for Apple's Mac Pro?

  -Can I update my Mac Pro 12 hearts? or update with a graphics card more powerful?

  Thank you

  -All those here who know the future plans Apple could not reveal that, because of the NDA, they signed.

  -Yes, you upgrade to the D700, but that requires to replace two wide boards that contain the GPU and other components. You will find the D700, as Apple does not sell to them.

  -The CPU can be upgraded. See:

  https://eShop.MacSales.com/MyOWC/upgrades.cfm?sort=pop & Model = 486 & type = Processor

  However, some app can use more carrots 6-8. Almost none can use all 12 cores.  When one of your apps look at the CPU tab in the activity monitor and see if you now use fully all 6 hearts.

  You have not said how you memory. Memory can be limited. In addition, sometimes the disk i/o is limiting what drive you have and how ae connected

  -For the good information of 2103 Mac Pro configurations see:

  http://macperformanceguide.com/index_topics.html#MacPro2013

• Acer S277HK 4K - retina of Macbook Pro 13 "(model end 2013)

  Hi Forum - I recently bought an Acer S277HK 4 K/60 Hz monitor and use as an external monitor with my Macbook Pro retina 13 "(modèle de fin 2013)."  I am connected using the "Cable issues Mini DisplayPort / Mini Displayport 4 K ready cable" to connect macbook to monitor.  So far, I cannot get the resolution of Acer to reach 4K / 60 Hz.   I did a lot of research on various forums and sites as possible and so far, everything I've seen leads me to believe that my MBP 13 '' end 2013 retina should support a 4K connection / 60 Hz, but so far, am not able to achieve this.  Someone has advice on how I can solve reach higher in the Acer external monitor resolution?  I've seen a few comments need to use 'switchrex' to adjust the settings, but no indication on this is extremely appreciated!  Thank you.

  What is max resolution/frequency, you can get?

  This

  With the help of 4K and Ultra HD TVs with your Mac - Apple Support screens

  You should be able to get 4K@60 Hz with cable 1.2 DP/CDM? You have a cable 1.2?

  A 4K cable does not mean it is 1.2 DP.

  The monitor configuration screens has an option to support 1.2 DP? Some do it.

• Firefox26 crashing randomly in Windows 7

  Firefox26 crashes randomly in Windows7 for about a week. I have tried all the following:
  -People with disabilities all add ons
  -Created a different user profile

  Sync is disabled. It happens on different Web pages.

  How can this be repaired?

  now, I'm curious to know how it happened - prevented accidents?

• Firefox on Windows 8 crashes randomly

  I have the latest version of Mozilla Firefox on my Windows PC. Mozilla crashes randomly and crashed almost 10 to 20 times last night when my mother was checking his email and Facebook. I went to the about: crashes page and here are the IDS of the reports. Any help would be much appreciated.

  BP-e81e50fa-e71c-4202-A611-36c7b2130222
  BP-f393ac38-97fa-4455-88FC-dd2e92130221
  BP-a47d00bd-9de5-4a63-a5ee-38ab32130221
  BP-3b059c6d-F97C-4ef3-BD22-be2022130221
  BP-15595200-7acc-4a21-84fe-a80c42130221
  BP-de0bf0b0-7bd5-45BC-A472-ab21d2130221

  I use Windows 8 with an AMD Radeon HD 6XXX/7XXX card and felt the constant system crashes (i.e., Blue Screen of Death) using Firefox 19 before finding this thread. Return to 18.2 Firefox has worked perfectly - thank you very much for providing relief, because I thought that I had to reinstall my OS.

• Firefox crashes several times a day. I haven't found one yet. It crashes randomly, I guess.

  Firefox crashes. I think that Facebook is still running. I tried in safe mode and with all plugins disabled but it keeps crashing randomly. A few days without accidents at all. A few days three crashes in one minute.

  This seems to have solved the problem:

  Repair of TCP/IP stack for use with Vista or 7 options.

  Start - all programs - accessories and do right click on command prompt, select "Run as Administrator" to open a command prompt.

  Restore the default install WINSOCK entries: netsh winsock reset catalog

  Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log

  Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log

  Reboot the computer.

• Skype crashes randomly 8.1 Windows Pro

  I'm having a problem where my Skype crashes randomly on my computer at work.

  This is what makes it very frustrating to use. My guess is it's a video driver problem but I downloaded a new driver for it already.

  Here is the information from my event viewer.

  Event ID: 1000

  Source: Application error

  Name of the failing application: Skype.exe, version: 7.1.0.105, time stamp: 0x54c25acc
  
  The failed module name: AMDh264Enc32.dll_unloaded, version: 1.0.0.1, time stamp: 0x50d22611
  
  Exception code: 0xc0000005
  
  Offset: 0 x 00006620
  
  ID of the process failed: 0 x 1248
  
  Start time of application vulnerabilities: 0x01d0568cf71d80f0
  
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  
  Path of the failing module: AMDh264Enc32.dll
  
  Report ID: b42b49c6-c29d-11e4-be8e-180373b05a9b
  
  Faulting full name of the package:
  
  

  Try to remove/rename the file AMDh264Enc32.dll .

  http://community.Skype.com/T5/Windows-desktop-client/Skype-crashes-video-driver/m-p/3602167#M297129

• Skype crashing randomly

  Since some updates my Skype crashes randomly every few minutes.

  It started with the following symptom: whenever my woud disk HARD secondary spin up because I navigated to it in Windows Explorer when Windows Explorer and Skype would freeze and then finally Skype would break, release of Windows Explorer.

  I changed the HARD drive forever and Skype still crashes randomly, even when I'm not using it but just it open in the background. Sometimes it works fine until half an hour before crashing, it takes less than a minute sometimes for her crashing again after the reboot.

  I tried to completely reinstall Skype (including remove the Skype of AppData folder) but it has not fixed the accidents (a new installation of Skype with an existing user is annoying as hell, you will hear the DING almost constantly while it receives all messages passed...).

  I have attached the report of the Windows event log below.

  Thanks in advance for a solution.

  Try first update your NVIDIA driver:

  http://www.GeForce.com/drivers/results/96885