MAF SOAP error when it is called by several insertion program

Similar Questions

• Error: "there was a disk error when you write to the file C\:Program files (x 86) \microsoft games\dungeon siege\resources\objects.dsres" during the installation of Dungeon Siege.

  When I try to install it it comes up with an error about 16% in the installation, saying that there is a disk error when you write to the file C\:Program files (x 86) \microsoft games\dungeon siege\resources\objects.dsres

  Any ideas?

  Hi MouseToe,

  What version of Dungeon Siege you trying to install?

  The cause of this problem could be the corrupted resource (.dsres) file or disk error. Here are some things you can do to solve the problem.

  Method 1: Run the disk check.

   

  Check the integrity of your hard disk for lost clusters and errors.

  To do this, follow the steps in this article: check a drive for errors

  Method 2: Defragment the hard disk.

  This improves the performance of your hard drive.

  Reference: improve performance by defragmenting your hard drive

  Method 3: Run the game as administrator.

  Here's how:

  (a) right click on the game configuration file.

  (b) choose 'Run as administrator'.

  Method 4: Try to install the game in a different folder or to a different drive

   

  Try to install the game in a different folder. If the computer has another hard disk, try to install the game on the other hard drive.

  Follow these steps.

  a. Insert the game disc in the drive.

  Note: Do not click on Quick Installation during installation.

  b. follow the setting menus until you see the change button.

  c. click change.

  d. in the path box, delete the existing path, and then type the following text:

  drive: \Program Files\Microsoftgame name Games\

  In this example,drive is the letter of the hard disk drive and the name of the game is the name of the game you are trying to install.

  e. click OK when finished.

  f. follow the instructions that appear on the screen to install the game.

  This should be it.

  For more information, please visit:

  http://support.Microsoft.com/dungeonsiegeiifaq

  For additional assistance, please post your concerns at the forum below.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get the 1097 error when trying to call a Labview DLL

  I had to write a wrapper DLL to use some functions in the DLL to a third party, and I'm having a few problems. I created an executable to test my code and it works fine, but when I try to execute the same function in the DLL that I created in Labview, I get error 1097. I read through most of the posts on this forum about this issue, but none of the proposed solutions are working for me. I'm sure this isn't a question of transfer settings to COLD LAKE because I changed the function so it only accepts a single entry (a number he obtains from a Subvi, which came from the third-party DLL, this entry is working with a bunch of other functions, so I don't think that is the question).

  I have attached the C code that creates the wrapper, but I don't know how it is useful without familiarity with the functions of the original DLL. I hope that someone can spot something basic I am out of my code, but please let me know if I need to call something else.

  I use a Labview 32 bit version 2012 on a 64-bit Windows 7 computer.

  Thanks in advance for any help!

  You should read the documentation on LoadLibrary() and understand. Essentially if you provide a full path to LoadLibrary() the DLL MUST be present at this place so that LoadLibrary() will succeed. If you pass only the name Windows DLL will ONLY search in these places:

  (1) if the module (the DLL) is already loaded it will return a handle to the loaded module and increment its reference count

  (2) if the referencing module contains a manifest (either incorporated into the image module or in a separate manifest file in the same directory as the executablemodule) specyfying a version number for this DLL will load this DLL with this version of the SxS (side by side) location and failure if it is not present

  (3) if the executable load contains a manifest (either incorporated in the executable file or in a separate manifest file in the same directory as the executable file) number specyfying a version for this DLL, it will load this DLL with this version of the location of SxS (side by side) and fail if it is not present

  (4) it will search for the DLL in the same directory as the directory where the current image of the process is loaded. It is NOT the directory of the DLL loading the DLL, BUT the directory where the EXE file from which the process was created.

  (5) in the system directory

  (6) in the Windows directory

  (7) any directory in the PATH environment variable

  (8) the path of current directory which is a location managed by windows by process and changed the two explicitedly when the application calls the API SetCurrentDirectory() but also implicitedly by things like the file selection dialog whenever it is rejected by other means than the undo operation.

  Essentially putting your dependend DLL in the same directory as the wrapper DLL does NOT work when you use the name of the DLL only UNLESS you place the two DLLs in the same directory as your executable file. If you don't want this restriction and want to be able to move these modules together in different directories, you don't have to create the correct path in your wrapper to LoadLibrary(). Basically, you must have the code to determine the location of your DLL wrapper path and then strip her own name and add the DLL name wrapped in it and then move to the LoadLibrary().

  There are several ways to determine the path of the current module. The simplest if you don't mind having the name hard-coded in your code DLL would be to ask GetModuleFileName (GetModuleHandle ("yourDLLname"), buffer, size).

• I get the following error when I turn on my computer ' C:\Program data\f10a0075-c31f-4c3d - 9 c 66 - 6aa39dd52db1.dat.

  Original title: rundll error

  I get the following error when I turn on my computer.  I am running VISTA with service pack 2.

  C:\Program data\f10a0075-c31f-4c3d - 9 c 66 - 6aa39dd52db1.dat
  Thanks for the help.

  Hello

  To remove the error message if still there after the controls above to malware.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• IE security error when it is called to getURL (&amp; quot; javascript:... &amp; quot; ;))

  This seems to be a problem with IE, but I write here incase everyone encountered it in the past... when I try and call a function javascript from flash using getURL, it seems that the function works fine except the function first calls inside the function is resizeBy don't...
  
  http://img.Ravenworks.ca/resizeTest.htm
  on this page, it generates an error "access denied"...
  
  http://img.Ravenworks.ca/resizeTestAlert.htm
  but on this page, resizing works well because it was preceded by an "alert".
  
  No one knows about it?

  You call the script while the mouse button is still down - a
  truck hijacking.

  All this still works in most age/unpatched IE, Microsoft has disabled
  resizeBy don't / and moveBy/while the mouse button is pressed. Of course, when
  You must click on the OK button of the alert dialog, the mouse is lowest.

  You will need to take a different approach.

• BlackBerry card error when it is called

  I am trying to invoke the map app Blackberry and pass search params.

  below is the OS5 doc

  MapsArguments mapsArgs = new MapsArguments(MapsArguments.ARG_LOCAL_SEARCH, "hotel", "Ottawa");
Invoke.invokeApplication(Invoke.APP_TYPE_MAPS, mapsArgs);

  When the code is executed, I get an error illegalThread on the Simulator and charge that the soft, but not the search screen once I selected continue on the sim card.

  someone knows why?

  Sorry I forgot to mention that I test it on the new sim card 9800 running OS6

  the code works on OS5.

• Error when Web service called Linux (CentOS5) server and CF8

  coldfusion.jsp.CompilationFailedException: errors reported by Java compiler: jikes: error while loading shared libraries: libstdc ++. so.5: cannot open shared object file: no such file or directory.

  coldfusion.jsp.CompilationFailedException: errors reported by Java compiler: jikes: error while loading shared libraries: libstdc ++. so.5: cannot open shared object file: no such file or directory.

• 'file name, directory name or volume label syntax is in good' I got this error when I try to execute most downloaded programs

  After getting my pc to factory setting this error keeps showing

  I downloaded programs can be third-party I put t know

  but I need them

  and when I try to install or run this error appeared

  I searched a lot but no way

  my windows product key is turned on, which miss me so much

  Although I uninstall my anti virus

  Please can someone help

  I need very detailed instructions please

  Hi Reem,

  For the most part, this problem occurs when you do not have Java installed on the computer. Check the version of Java from provided article and follow the steps.

  http://www.Java.com/en/download/installed.jsp

  I suggest to download Java from http://java.com/en/download/windows_ie.jsp then try again once installation and check.

  Browse http://www.java.com/en/download/faq/win8_faq.xml more about Java on Windows 8.

  Contact Support Java to see if it has an autour wok to get installed it for Windows 8.
  http://Java.com/en/download/support.jsp

  Hope this information helps. Response with status so that we can help you.

• error when calling NtSetTimerResolution in NTDLL 1097. DLL

  I get 1097 error when calling NtSetTimerResolution in NTDLL. DLL. why?   I scoured most of the posts on this forum describing the 1097 error and tried the solutions without success.

  This is a link to the function prototype (copied below) that I adapted in the node call the attached vi library (you will be asked to locate NTDLL. DLL on your system when opening it)

  NtSetTimerResolution and NtQueryTimerResolution are defined as follows. All hours are stated in hundreds of nanoseconds.

  NTSTATUS NtSetTimerResolution (
  IN ULONG RequestedResolution,
  IN BOOLEAN defined.
  ON PULONG ActualResolution
  );

  Parameters

  RequestedResolution

  The desired timer resolution. Must be the legal scope of the system timer values supported by NT. The standard x 86 systems it's 1 to 10 milliseconds. The values that are within the acceptable limits are rounded to the next higher standard x 86 HAL millisecond limit. This parameter is ignored if the Set parameter is set to FALSE.

  Set

  This is TRUE if we ask a new resolution of the clock, and FALSE if the application is indicating that he hasn't needed a resolution already implemented.

  ActualResolution

  The resolution of timer in effect once the call is returned in this parameter.

  Woohoo! I solved the problem.

  I was using a copy of NTDLL. DLL C:\Drivers\I386\SYSTEM32\NTDLL here. DLL (version 5.1.2600.1106)

  instead of C:\WINDOWS\system32\ntdll.dll here (version 5.1.2600.5755).

  An observation aside Interestingly enough, I did, when I tried to put the old version in C:\WINDOWS\system32 to see if it was just a problem of dependence, rather than a version number, I couldn't do it!  I tried renaming C:\WINDOWS\system32\ntdll.dll C:\WINDOWS\system32\ntdll.dll.old and immediately a replacement c:\windows\system32\ntdll.dll pop up would be in his place! I even tried to drag / drop of C:\Drivers\I386\SYSTEM32\NTDLL. DLL C:\WINDOWS\system32\ntdll.dll, it seemed to replace, but a system of security immediately replaced it with the latest version.   WinXP is smarter than I thought, or maybe something like Microsoft Windows Defender Antispyware installed by our company does this.

  In any case, I've confirmed lateer version is necessary because when I copied C:\WINDOWS\system32\ntdll.dll to C:\Drivers\I386\SYSTEM32\NTDLL. DLL, it also solves the problem.

  You might well ask why I did not use the correct version in the first place - well not knowing where he was, I only noticed the old version when I searched for it with my Google Desktop.

  Rgds

• Loading of a DLL on RT: Missing Export "DecodePointer" "Kernel32.dll" and 7 error when calling the DLL

  Hi, I recently changed to Visual Studio 2010 and Windows 7 64-bit.

  I have an existing Office RT system running RT 2009.  This system calls a DLL that I already built using Visual Studio .net 2003 and Windows XP.

  Since I've recompiled the DLL I get an error 7 file not found error when I call the RT DLL, even if I simply replaced the old DLL with a new one in the file system so the path has not changed.

  I also noticed that the message on the screen connected to the RT system during startup:

  "achieveworldpeace.dll" load error: lack of export 'DecodePointer' of ' Kernel32.dll'.

  Any ideas on this problem?  It is perhaps as simple as a switch in the compiler?

  Thank you.

  I'm not sure it's a simple switch in the project settings in Visual C. The problem is clearly in the standard C runtime library that gets linked to your DLL and refers to exports of Windows which are not available on the RT system. Don't forget that the RT system is a limited Win32 API emulation.

  I usually avoid these problems using Visual C 6 to create DLLs for LabVIEW projects. The standard library of the C runtimes will not know what Windows API reference more recent exports because they have supported even under Win95. So unless your explicitedly reference code not supported RT APIs you wouldn't have problems. If you do not use the standard C file i/o functions and management of memory in your DLL functions, you can also try to link statically C runtime libraries in your DLL, or vice versa depending on what you have now. It may or may not work. Otherwise there is not much else but by using an earlier version of Visual Studio.

• Skype crashes and gives an error when you try to call.

  original title: Skype force closure

  When I sign in to Skype and call someone force close program and gives an error message?

  Please help, need to Skype!

  Hello

  1. What is the exact error message that you receive when you use Skype to call?

  2 have you made any changes to the computer before the show?

  Method 1: Start your computer in a clean boot, and then try to use the Skype program to check whether a third-party program is causing the problem. To configure your computer to clean boot follow the link below.

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Method 2: If the problem persists then, uninstall and reinstall the Skype program and check if that helps. See the following link for uninstall Skype in the programs and features.

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Uninstall Skype try to download and install the latest version of Skype for Windows 7 operating system from the following link and check if that helps.

  http://www.Skype.com/intl/en-us/get-Skype/on-your-computer/Windows/post-download/

  If the problem persists then, I suggest you to ask your question on the forums of Skype.

  http://Forum.Skype.com/index.php?ShowForum=2

• error when calling a function package

  any idea why my object is slip out during a function call. the error is
  oracle.apps.fnd.framework.OAException: java.sql.SQLException: ORA-06502: PL/SQL: digital or value error: character of number conversion error
  ORA-06512: at line 1
  
  It errors when cs.execute () is. What is the investment? Thanks for the help...
  
  
  then the pkg func is xxx.get_log
  Get_Log (rmode in NUMBER, doc_type IN VARCHAR2 DEFAULT 'SUCH', IN VARCHAR2 DEFAULT NULL, annual
  doc_num IN VARCHAR2 DEFAULT NULL-, p_out out varchar2.
  )
  RETURN varchar2 IS...
  
  the co
  _______________
  ParamDocLocatorParamList serializable [] = {paramRMODE, paramDOC_TYPE, paramDOC_ID, paramDOC_NUM, p_out};
  
  Am = (OAApplicationModule) pageContext.getApplicationModule (webBean) OAApplicationModule;
  OADBTransaction dbtrans;
  OAViewObject docLocator = (OAViewObject) am.findViewObject ("DocLocatorVO1");
  
  rtxt0. SetValue (pageContext, "here it is" + am.invokeMethod ("getHTMLString", paramDocLocatorParamList));
  docLocator.executeQuery ();
  
  
  am.invokeMethod ("getHTMLString", paramDocLocatorParamList);
  
  
  _____________________
  
  the impl
  
  public String getHTMLString (String paramRMODE, String paramDOC_TYPE, String paramDOC_ID, String paramDOC_NUM, String p_out)
  {
  System.out.println ("enter the Impl AM");
  
  
  CallableStatement st = null;
  // {
  TXN OADBTransaction = (OADBTransaction) getDBTransaction ();
  Connection Conn = txn.getJdbcConnection ();
  
  String sql = "START: 5: = test_proc.get_log (: 1,: 2: 3: 4);" END; ";
  
  CallableStatement cs = txn.createCallableStatement(sql,1);
  String ErrorExist = "";
  String getHTML = "";
  
  Try
  {
  cs.setString (1, paramRMODE);
  cs.setString (2, paramDOC_TYPE);
  cs.setString (3, paramDOC_ID);
  cs.setString (4, paramDOC_NUM);
  cs.setString(5,p_out); -param
  
  / * cs.registerOutParameter(1,Types.CHAR);
  cs.registerOutParameter(2,Types.CHAR);
  cs.registerOutParameter(3,Types.CHAR);
  cs.registerOutParameter(4,Types.CHAR); * /
  cs.registerOutParameter(5,Types.CHAR);
  CS. Execute();
  getHTML = cs.getString (5);
  
  / * System.out.println ("getHTML is" + getHTML);
  
  CS. Close();
  If ("E".equals (ErrorExist))
  throw new OAException ("payment request is already cancelled");
  
  // */
  }
  
  catch (SQLException sqle)
  {
  try {cs.close (;})
  catch (Exception e) {}
  throw OAException.wrapperException (sqle);
  }
  Doctype string = paramDOC_TYPE;
  String docnum = paramDOC_NUM;
  
  String html;
  
  
  System.out.println ("paramDOC_TYPE in IMPL is" + doctype);
  System.out.println ("paramDOC_Numb in IMPL is" + docnum);
  
  
  GetHTML return;

  Hello
  Your package is to have different input parameters types,
  then the pkg func is xxx.get_log
  Get_Log (rmode in NUMBER, doc_type IN VARCHAR2 DEFAULT 'SUCH', IN VARCHAR2 DEFAULT NULL, annual
  doc_num IN VARCHAR2 DEFAULT NULL-, p_out out varchar2.
  )

  But you spend all String, could you please do it
  setInt rmode value,
  as

  cs.setInt (2, Integer.parseInt (paramRMODE));

  If paramRMODE is very large number, use setLong.

  Thank you

  With respect,
  Kali.
  OSSi.

• Error when calling bean 'delivery': waiting for reply has expired.

  Hello
  
  I run a process that currently catches an exception since a partnerlink. When the exception is caught, I send an email and the process stops. When I submit an application since the BPEL console, I have to wait the JTA timeout before the return of the page. However, the instance goes smoothly and I got the email before the time-out occurs. That's what I see in the newspapers. When I look at the audit workflow and activity, all activities were time-stamped before throwing exception. Has anyone seen this problem or knows what is happening. Is there a problem of in a catch block or catch-all mail?
  
  < 2009-04-19 22:33:41, 859 > < ERROR > < iCareTest.collaxa.cube > < BaseCubeSessionBean::logError > error when the bean 'delivery': waiting for reply has expired. The conversation id is cf9324c9be114336:513ede58:120c17e1922:-7 fc 0. Please check the detail process instance.
  com.oracle.bpel.client.delivery.ReceiveTimeOutException: waiting for reply has expired. The conversation id is cf9324c9be114336:513ede58:120c17e1922:-7 fc 0. Please check the detail process instance.
  
  Thanks in advance
  
  Jim

  There is no question why it happens to expire is because you don't have a response to the client in your tote.

  If you look at your processes, you will see that the default response is in the main field of application. When the Tote is called this response is in the past, that's why no reply is sent.

  Please answer in your catch all back to the client and it will work.

  see you soon
  James

• When you play call of Duty Modern Warfare 2, I get the 1000008e error code.

  original title: Windows crashed when you play the game

  I got error when playing in game:

  Error code 1000008e c0000005 parameter1, b53137f4, parameter3, parameter4 00000000 a561a424 parameter 2.
  Error ID: 1003

  It was happen every 30 minutes and 1 day

  I had Windows XP SP3, Phenom x 6 and HD 6450 on my old PC

  Phenom x 4 and ATI HD 6870 and Win 7 Ultimate edition

  Surprisingly, I can run MW2 without accident in my old PC for two days!

  Hello

  It seems that the issue could be with the file to install the game. I suggest you to uninstall the game and then get the new installation disc. Reinstall the game using the new drive and see if that fixes the problem.

  I suggest you to check with the game support Men of War for more information.

  http://www.menofwargame.com/support

• Error when you try to run the game in the call of duty Black Ops II of BEX

  Hi all

  I get this error when I try to run the request of COD Black Ops single player II file.

  Signature of the problem:
  Problem event name: BEX
  Application name: t6sp.exe
  Application version: 1.0.0.1
  Application timestamp: 509a 7621
  Fault Module name: StackHash_4bc9
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 0012fd4c
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 16393
  Additional information 1: 4bc9
  More information 2: 4bc95bc08c80253552a5c9f5e69006f7
  Information additional 3:7736
  Additional information 4: 77363e9c4fcc0db54525b3b0c99efd5e

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Please notify.

  Thank you

  Pravin

  Hi Pravin

  It is a Buffer Exreception overflow error that takes place within the program, caused by the t6sp.exe file.

  A buffer overflow occurs when data written to a buffer programmatically also corrupts data values in memory addresses adjacent to the destination due to the insufficient limits check buffer. This can happen when you copy data from a buffer to the other without checking first that the data fits into the destination buffer.

  I recommend that you contact the developer for assistance or to check known issues or updates of performance for this game.

  Support from Activision:
  http://support.Activision.com/Contact_us

  Concerning