BlackBerry card error when it is called

Similar Questions

• Get the 1097 error when trying to call a Labview DLL

  I had to write a wrapper DLL to use some functions in the DLL to a third party, and I'm having a few problems. I created an executable to test my code and it works fine, but when I try to execute the same function in the DLL that I created in Labview, I get error 1097. I read through most of the posts on this forum about this issue, but none of the proposed solutions are working for me. I'm sure this isn't a question of transfer settings to COLD LAKE because I changed the function so it only accepts a single entry (a number he obtains from a Subvi, which came from the third-party DLL, this entry is working with a bunch of other functions, so I don't think that is the question).

  I have attached the C code that creates the wrapper, but I don't know how it is useful without familiarity with the functions of the original DLL. I hope that someone can spot something basic I am out of my code, but please let me know if I need to call something else.

  I use a Labview 32 bit version 2012 on a 64-bit Windows 7 computer.

  Thanks in advance for any help!

  You should read the documentation on LoadLibrary() and understand. Essentially if you provide a full path to LoadLibrary() the DLL MUST be present at this place so that LoadLibrary() will succeed. If you pass only the name Windows DLL will ONLY search in these places:

  (1) if the module (the DLL) is already loaded it will return a handle to the loaded module and increment its reference count

  (2) if the referencing module contains a manifest (either incorporated into the image module or in a separate manifest file in the same directory as the executablemodule) specyfying a version number for this DLL will load this DLL with this version of the SxS (side by side) location and failure if it is not present

  (3) if the executable load contains a manifest (either incorporated in the executable file or in a separate manifest file in the same directory as the executable file) number specyfying a version for this DLL, it will load this DLL with this version of the location of SxS (side by side) and fail if it is not present

  (4) it will search for the DLL in the same directory as the directory where the current image of the process is loaded. It is NOT the directory of the DLL loading the DLL, BUT the directory where the EXE file from which the process was created.

  (5) in the system directory

  (6) in the Windows directory

  (7) any directory in the PATH environment variable

  (8) the path of current directory which is a location managed by windows by process and changed the two explicitedly when the application calls the API SetCurrentDirectory() but also implicitedly by things like the file selection dialog whenever it is rejected by other means than the undo operation.

  Essentially putting your dependend DLL in the same directory as the wrapper DLL does NOT work when you use the name of the DLL only UNLESS you place the two DLLs in the same directory as your executable file. If you don't want this restriction and want to be able to move these modules together in different directories, you don't have to create the correct path in your wrapper to LoadLibrary(). Basically, you must have the code to determine the location of your DLL wrapper path and then strip her own name and add the DLL name wrapped in it and then move to the LoadLibrary().

  There are several ways to determine the path of the current module. The simplest if you don't mind having the name hard-coded in your code DLL would be to ask GetModuleFileName (GetModuleHandle ("yourDLLname"), buffer, size).

• MAF SOAP error when it is called by several insertion program

  * There is no error when I'm using a SOAP Web service in a form and who invokes it with a button (see code below). A record is inserted into the remote database, whenever the data in the form are true and the button is pressed *.

  "< amx:commandButton actionListener =" #{bindings.persistDepartments.execute} "text = 'AddOne' disabled =" #{! bindings.persistDepartments.enabled} "id ="cb3"/ >

  * However when I use the same method of "persistDepartments" like this *.

  AdfmfJavaUtilities.invokeDataControlMethod ("WLFNewActWS", null, "persistDepartments", namesList, paramsList, typesList);

  * I get the following error *.

  [SEVERE - oracle.adfmf.framework - HttpServiceConnection - journal] Connection error: 500

  [SEVERE - oracle.adfmf.framework - HttpTransport - parseResponse] response [error: 500]: <? xml version =' 1.0 ' encoding = ' UTF - 8'. "> < s: Envelope xmlns:S = ' http://schemas.xmlsoap.org/soap/envelope/ ' > < Body > < ns0:Fault xmlns:ns1 = ' http://www.w3.org/2003/05/soap-envelope " xmlns:ns0 =" http://schemas.xmlsoap.org/soap/envelope/ ' > < ns0:Server faultcode > < / faultcode > < faultstring > object: null is not a type of known entity." " < / faultstring > < / ns0:Fault > < / Body > < / s: Envelope >

  [SEVERE - oracle.adfmf.framework - SoapTransportLayer - invokeSoapRequest] Exception encountered when calling SOAP request

  Endpoint: http:// < ip host >: 7101/WLFNewActWS-WLFNewActWS-context-root/WLFNewActWSPort

  " SOAPAction:" http://wlfnewactws/persistDepartments "

  Exception: HTTP Status Code 500 Internal Server Error: the server encountered an unexpected condition which prevented him from meeting the demand.

  [SEVERE - oracle.adfmf.framework - SynchronizationDC - syncDataFromOfflineToOnline] [Ljava.lang.StackTraceElement;@5b68e1ce

  * If this is the same webservice, the same connection, same everything for entry a-record and citing program for the creation of multiple registration, then what's wrong? BTW, the WS has been created with the option default Document/Wrapped *.

  Here is some detail information.

  I can drag and drop (created from the WLFNewActWS web service) data control on a page to display all of the records (see below) and it works very well, i.e. get record-breaking distance db

          

  Disabled = "#{!}" Bindings.getDepartmentsFindAll.Enabled}"id ="cb3"/ >

  selectedRowKeys = ' #{bindings. " Return.collectionModel.selectedRow}.

  selectionListener = "#{bindings." ShowMoreStrategy Return.collectionModel.makeCurrent}"="auto-scroll ".

  bufferStrategy = 'viewport' id = "lv1" >

  From there, I go to the ADD page and have the following code

  ID = "it2" / >

     

  Disabled = "#{!}" Bindings.persistDepartments.Enabled}"id ="cb3"/ >

  It also works very well which is to create a record in the remote database, but when I tried to create several records from the database device, using the following code

  public class SynchronizationDC {}

  public SynchronizationDC() {}

  Super();

  }

  public void syncDataFromOfflineToOnline() {}

  Trace.log (Utility.FrameworkLogger, Level.INFO, this.getClass (), "syncDataFromOfflineToOnline",

  "Executing syncDataFromOfflineToOnline method");

  try {}

  Connection Conn = DBConnectionFactory.getConnection ();

  conn.setAutoCommit (false);

  Select string = ' SELECT * FROM DEPARTMENTS;

  PreparedStatement pStmt = conn.prepareStatement (select);

  ResultSet rs = pStmt.executeQuery ();

  System.out.println ("Chk #0");

  int rowcount = 0;

  While (RS. Next {}

  RowCount ++;

  System.out.println ("processing line #" + rowcount);

  NamesList list = new ArrayList (1);

  List ParamsList = new ArrayList (1);

  List TypesList = new ArrayList (1);

  Department dept = new Department();

  dept.setDeptId (rs.getInt ("DEPARTMENT_ID"));

  dept.setDeptName (rs.getString ("DEPARTMENT_NAME"));

  dept.setMgrId (rs.getInt ("MANAGER_ID"));

  dept.setLocId (rs.getInt ("LOCATION_ID"));

  System.out.println ("Chk #1");

  GenericType gtDept =

  GenericTypeBeanSerializationHelper.toGenericType ("WLFNewActWS.Types.persistDepartments.arg0", dept);

  System.out.println ("Chk #2");

  namesList.add ("arg0");

  paramsList.add (gtDept);

  typesList.add (GenericType.class);

  AdfmfJavaUtilities.invokeDataControlMethod ("WLFNewActWS", null, "persistDepartments", namesList,

  (paramsList, typesList);

  System.out.println ("Chk #3");

  }

  } catch (SQLException e) {}

  Trace.log (Utility.FrameworkLogger, Level.SEVERE, this.getClass (), "syncDataFromOfflineToOnline",

  e.getMessage ());

  } catch (Exception e) {}

  Trace.log (Utility.FrameworkLogger, Level.SEVERE, this.getClass (), "syncDataFromOfflineToOnline",

  e.getStackTrace ());

  }

  }

  }

  I get the following error

  
  

  [SEVERE - oracle.adfmf.framework - HttpServiceConnection - journal] Connection error: 500 [SEVERE - oracle.adfmf.framework - HttpTransport - parseResponse] response [Error: {0}]: {1} [SEVERE - oracle.adfmf.framework - SoapTransportLayer - invokeSoapRequest] encountered exception on the basis of the request SOAP EndPoint:

  All I want to do is read the local db and synchronization with the remote control. What it takes to be elegant, a working model will do for a crucial customer presentation. Are there examples (insertion of records in remote DB) who had worked for you? I can try the same step by step to understand where I am going wrong in 'invokeDataControlMethod' or something escapes me!

  Let me know if you need more information. Thanks again in advance.

• BlackBerry smartphones +++ Logo when in a call

  Hello

  Nobody knows what that 5 + are when in a call? (See .jpg attachment)

  A number of people have asked me, and I don't know!

  See you soon... R

  

  There are some of the icons, you will see...

• Multimedia sync blackBerry Smartphone error when importing alum work

  I get a busy error from Itunes at the same place every time when you import Album art.  It always happens when dealing with files to 3300/3915.  Can someone help me determine which file in my library is the source of the problem?  Here is the log for Exception of BBM.

  [30000] (06/01 07:21:11): {3} current Date: 06/01/2010
  [50001] (06/01 07:21:11): {3} (debug logging level: 4)
  [50001] (06/01 07:21:11): {3} (event log level: - 1).
  [19028] (06/01 07:21:11): {3} EXCEPTIONS: System.IO.PathTooLongException - MESSAGE: the specified path, file name, or both are too long. The complete file name must be less than 260 characters, and the directory name must be less than 248 characters. -Of the BATTERY: to System.IO.Path.SafeSetStackPointerValue (Char buffer, Int32, Char value index) {CRLF} at System.IO.Path.NormalizePathFast (String path, Boolean fullCheck) {CRLF} at System.IO.Path.NormalizePath (String path, Boolean fullCheck) {CRLF} at System.IO.Path.GetDirectoryName (String path) {CRLF} to Rim.Application.Utilities.FileSystem.FullPath.get_Parent () {CRLF} to Rim.Media.Source.iTunes.ITunesArtCacheWorker.OnDoWork)
  [19028] (06/01 07:21:51): {3} EXCEPTIONS: System.IO.PathTooLongException - MESSAGE: the specified path, file name, or both are too long. The complete file name must be less than 260 characters, and the directory name must be less than 248 characters. -Of the BATTERY: to System.IO.Path.SafeSetStackPointerValue (Char buffer, Int32, Char value index) {CRLF} at System.IO.Path.NormalizePathFast (String path, Boolean fullCheck) {CRLF} at System.IO.Path.NormalizePath (String path, Boolean fullCheck) {CRLF} at System.IO.Path.GetDirectoryName (String path) {CRLF} to Rim.Application.Utilities.FileSystem.FullPath.get_Parent () {CRLF} to Rim.Media.Source.iTunes.ITunesArtCacheWorker.OnDoWork)
  [18005] (06/01 07:21:58): {3} EXCEPTIONS: System.NotImplementedException - MESSAGE: the method or operation is not implemented. -Of the BATTERY: at iTunesLib.IITArtwork.SaveArtworkToFile (String filePath) {CRLF} to Rim.Media.Source.iTunes.ITunesArtCacheWorker.OnDoWork () {CRLF} to Rim.Application.Tasks.Task.RunOneOperation)

  Here are the last lines of the log file.

  [40002] (06/01 07:20:57): {9} (model: 8320, JavaAppsVersion: 4.5.0.110)
  [40002] (06/01 07:20:57): {9} (recovery of mass storage volumes, try = 1)
  [40002] (06/01 07:20:57): {9} (now watch the volumes available on the device).
  [40002] (06/01 07:20:57): {9} (volumes of mass storage of checking to see if they are ready...)
  [40002] (06/01 07:20:57): {9} (--> mass storage volume: vol. path = F:\, vol. IsMediaMounted = True)
  [40002] (06/01 07:20:57): {9} (done by looking at volumes.  Attempt: 1, Volume are ready: True)
  [40002] (06/01 07:20:57): {9} (activation reader (F:\) attempt = 1)
  [40002] (06/01 07:20:57): {9} (wait until the player is ready (F:\)...)
  [40002] (06/01 07:20:57): {9} (Verified drive is ready (F:\).)
  [40002] (06/01 07:20:57): {9} (ensuring that media paths exist (F:\).)
  [40002] (06/01 07:20:57): {9} (disk State (F:\) - ACTIVE)
  [40002] (06/01 07:20:57): {9} (results of treatment of the initialization of the disk).
  [40002] (06/01 07:20:57): {9} (number of successful readers: 1).
  [40002] (06/01 07:20:57): {9} (number of failed drives: 0)
  [40002] (06/01 07:20:57): {9} (end, success = True)
  [50002] (06/01 07:20:57): {9} (BlackBerry Connect: finish)
  [40002] (06/01 07:20:57): {9} (ensuring that media paths exist (F:\).)
  [40004] (06/01 07:20:57): {4} (TASK: API_LOAD_DATASOURCE_iTunes, STATE: advance, TRANSITION: progress-> finishing, OPERATION: Void b__d())
  [40004] (06/01 07:20:57): {4} (TASK: API_LOAD_DATASOURCE_iTunes, STATUS: completed, TRANSITION: no, OPERATION: no)
  [40004] (06/01 07:20:57): {4} (TASK: API_LOAD_DATASOURCE_iTunes, length: 2025)
  [38050] (06/01 07:20:57): {4} (LoadDataSource: finish)
  [40002] (06/01 07:20:57): {9} (affecting the default drive: {0} F:\BlackBerry)
  [40002] (06/01 07:20:57): {4} (a new source of data has been loaded and is available.)
  [40004] (06/01 07:20:57): {4} (TASK: LoadMusicSourceTask, STATE: advance, TRANSITION: progress-> finishing, OPERATION: Void b__a())
  [40004] (06/01 07:20:57): {4} (TASK: LoadMusicSourceTask, STATUS: completed, TRANSITION: no, OPERATION: no)
  [40004] (06/01 07:20:57): {4} (TASK: LoadMusicSourceTask, duration: 2169)
  [40004] (06/01 07:20:58): {3} (TASK: destination photo of Reload, STATE: waiting, transition: no, OPERATION: no)
  [40002] (06/01 07:20:58): {B} (construction of DataSource: PicturesDevice)
  [38050] (06/01 07:20:58): {B} (LoadDataSource: implementation of PicturesDevice)
  [40004] (06/01 07:20:58): {B} (TASK: API_LOAD_DATASOURCE_PicturesDevice, STATUS: pending, transition: no, OPERATION: no)
  [40004] (06/01 07:20:58): {B} (TASK: Load_Picture_Library, STATUS: pending, transition: no, OPERATION: no)
  [38050] (06/01 07:20:58): {B} (datasource to load Rim.Media.Source.Pictures.PictureDataSourceLoader)
  [40002] (06/01 07:20:58): {B} (playback... device volumes)
  [40004] (06/01 07:20:58): {B} (TASK: Load_Picture_Library, STATUS: progress, TRANSITION: progress-> finishing, OPERATION: Void b__0())
  [40004] (06/01 07:20:58): {B} (TASK: Load_Picture_Library, STATUS: completed, TRANSITION: no, OPERATION: no)
  [40004] (06/01 07:20:58): {B} (TASK: Load_Picture_Library, duration: 13)
  [40004] (06/01 07:20:58): {B} (TASK: API_LOAD_DATASOURCE_PicturesDevice, STATUS: progress, TRANSITION: progress-> finishing, OPERATION: Void b__d())
  [40004] (06/01 07:20:58): {B} (TASK: API_LOAD_DATASOURCE_PicturesDevice, STATUS: completed, TRANSITION: no, OPERATION: no)
  [40004] (06/01 07:20:58): {B} (TASK: API_LOAD_DATASOURCE_PicturesDevice, length: 16)
  [38050] (06/01 07:20:58): {B} (LoadDataSource: finish)
  [40004] (06/01 07:20:58): {3} (TASK: destination photo of Reload,: progress, TRANSITION: progress-> finishing, OPERATION: Void b__2())
  [40004] (06/01 07:20:58): {3} (TASK: destination photo of Reload, STATUS: completed, TRANSITION: no, OPERATION: no)
  [40004] (06/01 07:20:58): {3} (TASK: destination photo of Reload, duration: 210)
  [40004] (06/01 07:20:58): {3} (TASK: UploadUsageDataTask, STATUS: pending, transition: no, OPERATION: no)
  [38041] (06/01 07:20:59): {3} (data communication was successful: True)
  [38040] (06/01 07:20:59): {3}
  [40004] (06/01 07:20:59): {3} (TASK: UploadUsageDataTask, STATE: advance, TRANSITION: progress-> finishing, OPERATION: Void b__9())
  [40004] (06/01 07:20:59): {3} (TASK: UploadUsageDataTask, STATUS: completed, TRANSITION: no, OPERATION: no)
  [40004] (06/01 07:20:59): {3} (TASK: UploadUsageDataTask, duration: 505)
  [40004] (06/01 07:21:01): {3} (TASK: Art Cache Worker, STATE: waiting, transition: no, OPERATION: no)
  [19038] (06/01 07:21:01): {3} (caching album art of beginning of process...)
  [19044] (06/01 07:21:01): {3} (an attempt of analysis iTunes version: 9.0.2.25)
  [19028] (06/01 07:21:11): {3} EXCEPTIONS: System.IO.PathTooLongException - MESSAGE: the specified path, file name, or both are too long. The complete file name must be less than 260 characters, and the directory name must be less than 248 characters. -Of the BATTERY: to System.IO.Path.SafeSetStackPointerValue (Char buffer, Int32, Char value index) {CRLF} at System.IO.Path.NormalizePathFast (String path, Boolean fullCheck) {CRLF} at System.IO.Path.NormalizePath (String path, Boolean fullCheck) {CRLF} at System.IO.Path.GetDirectoryName (String path) {CRLF} to Rim.Application.Utilities.FileSystem.FullPath.get_Parent () {CRLF} to Rim.Media.Source.iTunes.ITunesArtCacheWorker.OnDoWork)
  [40004] (06/01 07:21:16): {F} (TASK: start automatic update, STATE task: waiting, transition: no, OPERATION: no)
  [40004] (06/01 07:21:16): {F} (TASK: start automatic update, STATE task: progress, TRANSITION: progress-> finishing, OPERATION: Void CheckForUpdate())
  [40004] (06/01 07:21:16): {F} (TASK: start automatic update, STATE task: complete, TRANSITION: no, OPERATION: no)
  [40004] (06/01 07:21:16): {F} (TASK: start auto update task, duration: 5)
  [40004] (06/01 07:21:16): {F} (TASK: DownloadAndUpdateSupportedDevices, STATUS: pending, transition: no, OPERATION: no)
  [40004] (06/01 07:21:17): {F} (TASK: DownloadAndUpdateSupportedDevices, STATUS: progress, TRANSITION: progress-> finishing, OPERATION: Void b__c())
  [40004] (06/01 07:21:17): {F} (TASK: DownloadAndUpdateSupportedDevices, STATUS: completed, TRANSITION: no, OPERATION: no)
  [40004] (06/01 07:21:17): {F} (TASK: DownloadAndUpdateSupportedDevices, duration: 294)
  [38034] (06/01 07:21:17): {F} (3.0.0.38)
  [38017] (06/01 07:21:17): {F} (3.0.0.38)
  [38035] (06/01 07:21:17): {F} (Version does not require an update, or no update is available.)
  [38016] (06/01 07:21:17): {F}
  [19028] (06/01 07:21:51): {3} EXCEPTIONS: System.IO.PathTooLongException - MESSAGE: the specified path, file name, or both are too long. The complete file name must be less than 260 characters, and the directory name must be less than 248 characters. -Of the BATTERY: to System.IO.Path.SafeSetStackPointerValue (Char buffer, Int32, Char value index) {CRLF} at System.IO.Path.NormalizePathFast (String path, Boolean fullCheck) {CRLF} at System.IO.Path.NormalizePath (String path, Boolean fullCheck) {CRLF} at System.IO.Path.GetDirectoryName (String path) {CRLF} to Rim.Application.Utilities.FileSystem.FullPath.get_Parent () {CRLF} to Rim.Media.Source.iTunes.ITunesArtCacheWorker.OnDoWork)
  [18005] (06/01 07:21:58): {3} EXCEPTIONS: System.NotImplementedException - MESSAGE: the method or operation is not implemented. -Of the BATTERY: at iTunesLib.IITArtwork.SaveArtworkToFile (String filePath) {CRLF} to Rim.Media.Source.iTunes.ITunesArtCacheWorker.OnDoWork () {CRLF} to Rim.Application.Tasks.Task.RunOneOperation)

  I found the file to media sync stopped on.  It was a digital booklet.  Once I removed the Media sync completed the import file.

• IE security error when it is called to getURL (&amp; quot; javascript:... &amp; quot; ;))

  This seems to be a problem with IE, but I write here incase everyone encountered it in the past... when I try and call a function javascript from flash using getURL, it seems that the function works fine except the function first calls inside the function is resizeBy don't...
  
  http://img.Ravenworks.ca/resizeTest.htm
  on this page, it generates an error "access denied"...
  
  http://img.Ravenworks.ca/resizeTestAlert.htm
  but on this page, resizing works well because it was preceded by an "alert".
  
  No one knows about it?

  You call the script while the mouse button is still down - a
  truck hijacking.

  All this still works in most age/unpatched IE, Microsoft has disabled
  resizeBy don't / and moveBy/while the mouse button is pressed. Of course, when
  You must click on the OK button of the alert dialog, the mouse is lowest.

  You will need to take a different approach.

• BlackBerry Smartphones * or # when a phone call is not recognized

  Need help!

  Sometimes, when I am on a call and asks me to enter my account number, and then press the book, I enter my account number and then press [alt] [Q]. However, it is not to recognize the # sound being pressed. Some companies will let you just enter the number of account and then assumes that you have completed, but I came across one who keeps asking me to enter the account number, and then press the book.

  I also have the same question when I call my home phone and I need to support on * to access my voicemail. I press [alt] [A], and it keeps telling me that I entered an invalid option.

  I would appreciate any suggestions or messages.

  Thanks in advance

  Press on the * /A key, with NO pressure on the ALT key.

• Smartphones blackBerry 'Fatal Error' when you try to update via the Desktop Manager

  Hi all

  I hope that there, a genius will be able to help me.

  I received and email from RIM this morning, which suggests an upgrade to the current version of the software, that I tried.

  It is passed through the implementation of procedure, checking the current version (4.0.0.174) and checked for the latest version. I followed the procedure on the screen instructions showed. The Director of office went through the routine, saved running, then turn off the radio, then as he arrived at the 3/11 TI threw up the "fatal error has occurred during the upgrade. Please try again ".

  So I tried again, but the same thing happens.

  Curiously, if I go through the device and try a wireless upgrade, it says there is no upgrade to run? !

  Weird indeed.

  Even weirder: I just through the upgrade wireless setting, and the device says I have version 4.7.0.141. This does not match the version I posted above! Huh?

  Apart from this little problem, I love my Storm! It is the second device, I got it, the first storm put itself and was generally a pain, it seems to behave itself.

  Any help gratefully received

  Matthew

  Yes, check with your carrier to see if they have released a newer version of the operating system. I think it's a bug somewhere in the Office Manager. I've updated to the latest version offered by my company, but whenever I use the Desktop Manager it tells me of updates are available. It happens to a lot of people on the boards. I simply cancel in the command prompt

• Error when Web service called Linux (CentOS5) server and CF8

  coldfusion.jsp.CompilationFailedException: errors reported by Java compiler: jikes: error while loading shared libraries: libstdc ++. so.5: cannot open shared object file: no such file or directory.

  coldfusion.jsp.CompilationFailedException: errors reported by Java compiler: jikes: error while loading shared libraries: libstdc ++. so.5: cannot open shared object file: no such file or directory.

• error message "memory card error" with a SD card on C5180

  Photosmart C5180 displays 'memory card error' when SanDisk SDHC inserted.  (The map is not damaged, it is new & working behind closed doors).  I was not successful in finding answers on the HP site.  Any help most appreciated.  Thank you very much.

  Looking at the specifications, I see memory 'High Capacity' (SDHC) is NOT supported on the device:

  http://support.HP.com/us-en/document/c00701803

  I also checked with our group in San Diego - SDHC is not supported.

  ~ TechHelper7

• Add MenuItem to the mapping of Blackberry, only when it is called from my application

  Hi all

  I develop a Blackberry application that calls the Blackberry plan using the api to Invoke.

  I need to add the menu item to this map of blackberry only when it is called from my application (means, blackberry card should not have any other newly added menuItem when it is called directly as a standalone application).

  Is this possible? If so, how is it possibe?

  Help, please.

  I guess you can try:

  1. Add the menu item

  2 call

  3. remove the menu call back form element

• error when calling NtSetTimerResolution in NTDLL 1097. DLL

  I get 1097 error when calling NtSetTimerResolution in NTDLL. DLL. why?   I scoured most of the posts on this forum describing the 1097 error and tried the solutions without success.

  This is a link to the function prototype (copied below) that I adapted in the node call the attached vi library (you will be asked to locate NTDLL. DLL on your system when opening it)

  NtSetTimerResolution and NtQueryTimerResolution are defined as follows. All hours are stated in hundreds of nanoseconds.

  NTSTATUS NtSetTimerResolution (
  IN ULONG RequestedResolution,
  IN BOOLEAN defined.
  ON PULONG ActualResolution
  );

  Parameters

  RequestedResolution

  The desired timer resolution. Must be the legal scope of the system timer values supported by NT. The standard x 86 systems it's 1 to 10 milliseconds. The values that are within the acceptable limits are rounded to the next higher standard x 86 HAL millisecond limit. This parameter is ignored if the Set parameter is set to FALSE.

  Set

  This is TRUE if we ask a new resolution of the clock, and FALSE if the application is indicating that he hasn't needed a resolution already implemented.

  ActualResolution

  The resolution of timer in effect once the call is returned in this parameter.

  Woohoo! I solved the problem.

  I was using a copy of NTDLL. DLL C:\Drivers\I386\SYSTEM32\NTDLL here. DLL (version 5.1.2600.1106)

  instead of C:\WINDOWS\system32\ntdll.dll here (version 5.1.2600.5755).

  An observation aside Interestingly enough, I did, when I tried to put the old version in C:\WINDOWS\system32 to see if it was just a problem of dependence, rather than a version number, I couldn't do it!  I tried renaming C:\WINDOWS\system32\ntdll.dll C:\WINDOWS\system32\ntdll.dll.old and immediately a replacement c:\windows\system32\ntdll.dll pop up would be in his place! I even tried to drag / drop of C:\Drivers\I386\SYSTEM32\NTDLL. DLL C:\WINDOWS\system32\ntdll.dll, it seemed to replace, but a system of security immediately replaced it with the latest version.   WinXP is smarter than I thought, or maybe something like Microsoft Windows Defender Antispyware installed by our company does this.

  In any case, I've confirmed lateer version is necessary because when I copied C:\WINDOWS\system32\ntdll.dll to C:\Drivers\I386\SYSTEM32\NTDLL. DLL, it also solves the problem.

  You might well ask why I did not use the correct version in the first place - well not knowing where he was, I only noticed the old version when I searched for it with my Google Desktop.

  Rgds

• Loading of a DLL on RT: Missing Export "DecodePointer" "Kernel32.dll" and 7 error when calling the DLL

  Hi, I recently changed to Visual Studio 2010 and Windows 7 64-bit.

  I have an existing Office RT system running RT 2009.  This system calls a DLL that I already built using Visual Studio .net 2003 and Windows XP.

  Since I've recompiled the DLL I get an error 7 file not found error when I call the RT DLL, even if I simply replaced the old DLL with a new one in the file system so the path has not changed.

  I also noticed that the message on the screen connected to the RT system during startup:

  "achieveworldpeace.dll" load error: lack of export 'DecodePointer' of ' Kernel32.dll'.

  Any ideas on this problem?  It is perhaps as simple as a switch in the compiler?

  Thank you.

  I'm not sure it's a simple switch in the project settings in Visual C. The problem is clearly in the standard C runtime library that gets linked to your DLL and refers to exports of Windows which are not available on the RT system. Don't forget that the RT system is a limited Win32 API emulation.

  I usually avoid these problems using Visual C 6 to create DLLs for LabVIEW projects. The standard library of the C runtimes will not know what Windows API reference more recent exports because they have supported even under Win95. So unless your explicitedly reference code not supported RT APIs you wouldn't have problems. If you do not use the standard C file i/o functions and management of memory in your DLL functions, you can also try to link statically C runtime libraries in your DLL, or vice versa depending on what you have now. It may or may not work. Otherwise there is not much else but by using an earlier version of Visual Studio.

• I have a code 10 error when I insert my SD card. How can I fix it?

  I have a code 10 error when I insert my SD card.  I click on update driver, to connect to windows update, but it cannot complete.  Is there any solution for this?  I reinstalled windows a few months ago SD card worked fine until a few days ago.  Thank you!

  Read this article completely, if you decide to apply the fix that is in the upper left corner.

  http://support.Microsoft.com/kb/921413

• BlackBerry Smartphones "Cannot access local files" error when syncing with Outlook

  I have an old BlackBerry Bold 9780 which works well. However, just yesterday, I started getting a "Cannot access local files" error when you try to use BB Desktop to synchronize with Microsoft Outlook 2016. I uninstalled and reinstalled the BlackBerry Desktop Software 7.1, but the problem persists. There is no error when using Outlook or other aspects of synchronization in BB Desktop.

  I am running 64-bit Windows 10 on my desktop computer. I got no synchronization issues in the past until yesterday. To my knowledge, nothing has changed.

  A Google search for the error message returns questions posted on several different forums, but there is no clear solution given.

  The problem seems to be in Outlook, rather than with the BlackBerry Desktop, at least in my case. I solved it by repairing my Microsoft Office installation. For most versions of Office, this is accomplished by going to the list of programs installed in the Control Panel, highlight and right-click on the desktop and select the option to repair or change.