MagicJack problems and surface

Similar Questions

• Someone else has Apple Airplay jumping and drop outs when streaming music?  WiFi is not the problem, and there is nothing around the units of airtime to interference.  Impossible to listen to music.  Thanks for any advice.

  I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.  I have a unit of airtime plugged directly on my stereo receiver that feeds music throughout my house.  My WiFi connection is not the problem and there is nothing to cause interference.  Airplay modules are not more than 15 feet distance modem or range Extenders.  Someone else has this problem and, hopefully, a solution?   I'm tired of doing factory reset all the time.  Many thanks for any advice.

  I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.

  By "Airplays" what are you actually refers to... Base station airPort Express, Apple TV, or something else?

  ... and "V1 to V2" do you mean you replaced a 1st generation 802.11n AirPort Express with a 2nd generation?

  Airplay modules are not more than 15 feet distance modem or range Extenders.

  When steaming audio with AirPlay, the flow goes first to the device host to iTunes to the router Wi - Fi, this unit is connected to. From there, he will travel to the AirPlay "speaker". A president could be an AirPort Express, Apple TV or an AirPlay device ready another manufacturer. If you use line extensions, the flow must go through those as well... so there is potential bottlenecks between the host and the speaker. One of these could be the cause of the issue you found.

• Firefox 34.0.5 cannot print correctly. I checked all the pages on firefox problems and still can not solve the problem.

  I use 34.0.5 with Windows 7 and that you cannot print correctly. In print preview, it appears in a label size. I double checked all my settings in firefox and my preferences from the printer, I checked all the pages on firefox problems and still can not solve the problem.

  I was able to finally solve the problem, but I had to do a complete reset of firefox. Thank you for your time.

• Firefox has been a problem and crashed

  I had this "Firefox has a problem and crashed," started this morning. It overwrites every time when I tried to start it, even with safe mode. I tried to uninstall and reinstall Firefox. But it does not solve the problem. Here is the list of the crush reports:
  BP-24ed344a-6d03-4341-aa9d-f3c6f2140917
  BP-3c53dc49-c3d3-4222-80bf-be77d2140917
  BP-1d35cd40-C223-45E2-9395-87b7b2140917
  BP-1b0956a8-6329-4FE7-8174-3282c2140917
  BP-dc1cf498-839a-41d1-B485-cc3b82140917
  Help, please! Thank you!

  Hello, please report to us with your crash id. This seems to be quite prolific start at this time crash. other affected users have reported that it is solvable by a clean reinstall:

  1. Please try to uninstall firefox from the system control panel.
  2. then go to the firefox program folder (usually located in C:\Program Files (x 86) \Mozilla Firefox) and delete the rest of the firefox program folder everything manually
  3. later and try reinstalling the browser with a new copy of https://www.mozilla.org/firefox/all/

• Sears.ca or homedepot.ca will load until I opened another tab (new) do you know about this problem and have a fix?

  I enter homedepot.ca in the address field and press return, the address in the address bar for area and State at the foot of the screen, that the two are flashing. While these are continuous flashing I opened a new tab and the address requested stops flashing. I can then click on the first tab and the web page!
  If I try to navigate to another page of the Homedepot.ca site the same problem and the solution described above is repeated.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• After you install the update, I get this message on an application Facebook '502 Bad Gateway nginx' what is the problem and what should I do to solve the problem?

  After you install the update, I get this message on a Facebook '502 Bad Gateway application
  Nginx' what is the problem and how do I solve the problem?

  See also:

  • http://en.kioskea.NET/FAQ/15289-Google-nginx-404-error
  • [811399/questions/811399]

• Have problems and questions with Time Capsule were addressed in any significant way. Reluctant to buy according to your comments.

  Have problems and questions with Time Capsule was dealt with in a meaningful way? Reluctant to buy according to your comments.

  Apple did not have any material changes to the time Capsule to nearly 3 years. The only change that has occurred in the last 18 months or so is a firmware update to address security issues.

• After I install my laptop bootcamp has restarted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked the scores he had only a mac partition

  After installing bootcamp my laptop has rebooted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked partitions there was only a mac partition and I can't get back the deleted memory

  Post a screenshot of what shows utility disk to disk

  How to take a screenshot on your Mac - Apple Support

  OSX works OK?

• iTunes continues to crash on my iMac using OS 10.11.4 forcing me from quitting smoking. Someone else has this problem and how can I solve this problem?

  iTunes continues to crash on my iMac using OS 10.11.4 forcing me from quitting smoking. Someone else has this problem and how can I solve this problem? I use the latest version of iTunes. There seems to be a problem since I updated the system software.

  iTunes: solving problems with third party plug-ins iTunes - https://support.apple.com/HT203395 - press Option and command (on Mac OS X)

  Hold down the option/alt key and create a new test library. If iTunes start your old library file is corrupted and will need to be replaced from a backup or rebuilt from scratch.

  LINC Davis February 2016 - https://discussions.apple.com/message/29767369#29767369

  Reinstall iTunes:

  -Post of Niel April 2015: re - install iTunes app - https://discussions.apple.com/message/28055467#28055467 - delete the old application first, with instructions on how to do it.

  -April 2015 LincDavis post with some more details on the method outlines Niel - https://discussions.apple.com/message/28101611#28101611

• -Portege Z10t 13 V graphic driver problems and lag with W10

  Hello

  Please excuse my bad English,

  I just bought the Z10t A 13V PT 141, with W8.1. This computer works fine on W8, but I want to install W10. I already tried 3 times but each time, the cursor (with the touch pad or mouse) is lagging behind, each movement is jerky and works very well. I tried to see if it was a driver problem and downloaded new drivers from Toshiba for the W10.

  I did the same thing with Intel drivers, but for graphics drivers, there is an error message: "a custom computer manufacturer driver is installed on your computer. The Intel driver update utiliy is not able to update the driver. Install a generic Intel driver instead of the driver from the computer manufacturer custom can cause technical problems. Contact your computer manufacturer for the latest driver for your computer.

  When I'm with W8, drivers are correctly updated...

  So I think that the cursor problem is due to this driver problem (I hope so, but I'm not sure). What is the solution? I'M alone with this problem?

  Thank you

  Thomas

  Hello Thomas,.

  EXACTLY the same problem here with my uograded Portege Z10t-A-140 to WIN 10.
  I also took the same steps and encountered the same problems and no solution.
  I find Toshiba after sale customer VERY INEFFECTIVE and disappointing, because it seems no way to get a support PROFESSIONAL from Toshiba on this issue (or any other for that matter).
  Note that I absolutely do not consider helping other users on a forum or self-help a form of professional support at all!
  -> Not happy with Toshiba!

• Qosmio F750 - CUDA driver problem and display

  Hello

  I do computer scientist parallel with my Qosmio F750, but I am unable to run CUDA database test, called "bandwidthTest.exe". It returns the following error:

  cudaGetDeviceProperties return 35
  -> CUDA driver version is not enough for the version of the runtime CUDA
  ...

  I did some research on this problem, and everyone agreed that the driver of my screen should be updated. I already 290 driver version, but the latest version is 301,24. Why can't just install the NVidia site Web of NVidia drivers as I do with all my other computers?

  What can I do to fix this? I don't want the certified driver for Toshiba... I want just a standard NVidia driver.

  Thank you for all the efforts made.

  > Why can't just install the NVidia site Web of NVidia drivers as I do with all my other computers?
  With computers, you mean laptops or desktops? I put t know where to work but I guess in your company or school where you work is THIS Department. Contact the people who work there and I hope they can help you with the explanation why you can't use the NVIDIA drivers.

  There is big difference between desktops and laptops. Desktop graphics cards are supported by the manufacturers of graphics directly, but on mobile units are mobile manufacturers.
  There are several reasons for this.

• Satellite U400-112 - WoW problems and the image is not good

  Hello!

  My laptop is Satellite U400-112 and matching video Intel X 3100.

  When I play in openGL, 3D graphics on minimum and the image quality are not good. The same situation with Direct3D even worse. I have a guess - the game not installed, I copied the folder with the game on another computer, maybe I need to reinstall? I installed the latest drivers for the video of the official website of Intel.

  Maybe someone have the same problem and can help me to solve it.

  Hello

  This only happens on the world of Warcraft or in other games too?

  I'm a bit confused because you have set the minimum graphics and then you wrote that the photo isn't good in my opinion that's normal as the photo isn't good, if you play on minimum graphics settings.
  Maybe you can post a screenshot screen or something else.

  You also need to update DirectX version on your laptop that you can find on the Microsoft Web site.

• WANT to PC dv7: at startup, I get a blue screen with a :( Your PC has encountered a problem and needs to restart.

  While I was using my laptop I received a message that HP was running some sort of program disagnostic and in the end, he asked if I wanted to repair the problems. I declined the offer. However, the next time I turned on the computer, I saw the first time the HP logo, then the message "automatic repair Preparation". After a few seconds there is a short rectangle that flashes on and disappears. Then I got a blue screen with: your PC encountered a problem and needs to restart. We will restart for you. "Who starts a blue screen and reboot cycle. Blue screens replacement error messages saying: "If you want to learn more, you can search online for later for this error" and once it will say 'FAT file system' and once 'NTFS file system. I have spent to support HP dv7 ENVY page and tried the suggestions of repair without success. Is it possible to go beyond these two error messages and their blue screens to get my system working again? If so, how?

  Hello

  Error code 24 characters is a failure of the short test (DST) disk Self and would indicate that hard is defective and must be replaced.  It is also consistent with your description of the problem.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - if necessary, you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are no longer under warranty, it's a fairly simple procedure to replace the HARD drive yourself - a brief guide on this is below.

  Readers on the following links are examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  1 TB laptop hard drive.

  The procedure to replace the hard drive begins on Page 56 of your maintenance & Service Guide.

  About reinstalling Windows 10 on new HARD drive, as long as the previous installation of Windows 10 had activated Ok after upgrading to Windows 7/8.1, you can simply create your own Windows 10 installation media and perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I have not a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• HP pavilion ab219tx 15: your PC has encountered a problem and needs to restart

  20 days ago, I bought the HP Pavilion 219tx ab.
  There is a performance in the laptop... shift, which was resolved after updating windows and some drivers.
  
  But yesterday when I was using the laptop all at once a blue screen with a message "your PC came across a problem and must be restart." Windows collects information and will reboot the system. "It took 5 minutes to restart the system, and after that the system worked well.
  
  This problem will occur again. Is the front offset and this crash is a problem hardware or any glitch in windows 10 or something els

  This blue screen is caused by a process in conflict with Windows 10. Something that you have downloaded which is incompatible with Windows 10 perhaps.

  If you download it and run it its log file will tell you what caused the accident.

  http://www.resplendence.com/WhoCrashed

  You want the free version for home use.

• Issue of games - exe has encountered a problem and needs to close

  Hello world

  I was wondering if there was someone out there who could help me.

  I can load a game on my laptop (demanding nothing, just football coach) but when I then open the game when loading I get the following message

  "(whatever_the_game_is).exe has encountered a problem and needs to close." We are sorry for the inconvience.

  Can anyone recommend a way to resolve this?

  Thanks in advance

  Rich

  Hi Rich

  Using original or copy?