Qosmio F750 - CUDA driver problem and display

Similar Questions

• -Portege Z10t 13 V graphic driver problems and lag with W10

  Hello

  Please excuse my bad English,

  I just bought the Z10t A 13V PT 141, with W8.1. This computer works fine on W8, but I want to install W10. I already tried 3 times but each time, the cursor (with the touch pad or mouse) is lagging behind, each movement is jerky and works very well. I tried to see if it was a driver problem and downloaded new drivers from Toshiba for the W10.

  I did the same thing with Intel drivers, but for graphics drivers, there is an error message: "a custom computer manufacturer driver is installed on your computer. The Intel driver update utiliy is not able to update the driver. Install a generic Intel driver instead of the driver from the computer manufacturer custom can cause technical problems. Contact your computer manufacturer for the latest driver for your computer.

  When I'm with W8, drivers are correctly updated...

  So I think that the cursor problem is due to this driver problem (I hope so, but I'm not sure). What is the solution? I'M alone with this problem?

  Thank you

  Thomas

  Hello Thomas,.

  EXACTLY the same problem here with my uograded Portege Z10t-A-140 to WIN 10.
  I also took the same steps and encountered the same problems and no solution.
  I find Toshiba after sale customer VERY INEFFECTIVE and disappointing, because it seems no way to get a support PROFESSIONAL from Toshiba on this issue (or any other for that matter).
  Note that I absolutely do not consider helping other users on a forum or self-help a form of professional support at all!
  -> Not happy with Toshiba!

• Display driver problems and clicking noise with Satellite C670D-11R

  Hi all

  my friend bought a Toshiba Satellite c670d-11r in Germany on a catalogue (Otto to be precise) with Windows 7 Home Premium installed on it.

  After a few months he brought to a computer store and a service in the city, he lives to do a fresh install of Windows. A day ago he came to visit me and complained about how slow it was and asked me to install Windows again and that's what I was doing.

  After installing that I asked him about the CD of drivers he has no idea where he is or if he even had one so I downloaded all the drivers on the site and installed on her laptop except the display driver.

  First I unpacked it in the Appdata path that has been predefined, but that he would not launch after extraction, so I gave in a path custom and tried to run "Installtb.exe" but still once nothing happened so I decided to run the 'Setup.exe', he began installing CCC and after installation, I checked "Dxdiag" but it doesn't always recognize not the GPU in the view tab as in the previous version of Windows, as a "Radeon HD 6320" but as a "Standard video card" I tried everyhing I could come with but nothing really helped, a little later, I noticed a rattling noise where I think the HARD drive should be (to the right of the touchpad) I thought that I broke something , but he said that he noticed that also a few weeks ago by clicking.

  I'll post the dxdiag log now if this will help.

  + System Information +.

  Time of this report: 25/02/2012, 19:19:19
  Computer name: ZLATKO-PC
  Operating system: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)
  Language: Serbian (Latin) (regional setting: Serbian (Latin))
  System manufacturer: TOSHIBA
  System model: SATELLITE C670D-11R
  BIOS: BIOS Date: 01/07/11 16:44:54 worm: 04.06.04
  Processor: AMD E-450 APU with graphics Radeon (TM) HD (2 CPUs), ~1.6GHz
  Memory: 4096 MB RAM

  Additional information:
  I'm not an expert at this, I have no epiriance with ATI graphics cards and it's a 64 bit version of Windows, as suggested.

  Thank you in advance.

  + The message was edited: useless info has been removed.

  Hello

  In regards to the HARD drive clicking noise:
  It is nothing unusual can happen with some kind of discs hard I have a few hard drives (internal and external) of two hard drives produce a rattling sometimes noise, but the drive HARD running and working properly so I guess that its ok but nevertheless if possible, back up the data always

  Regarding the ATI driver:
  The laptop belongs to the PSC4AE series.
  Choose the series C670D PSC4AE in driver download Toshiba form European page pilot would show you the driver compatible v8.812.2.2.

  You must download and unzip the package first.
  Now you should see the file TCA0056800E.exe.
  This file must be decompressed too

  Now, go to Device Manager and select the graphics card.
  Here to choose install driver then the manual installation procedure. Now point to the folder where you have unzipped the display driver.
  AFAIK driver for Win 64 bit files are placed in the driver-> display folder
  Usually the Windows operating system must pick up the right files to install the driver

  That s it

• Qosmio F750 screen replacement problems

  Hi all

  I hope you can help me,

  I just replaced the display on my Qosmio F750 which unfortunately took out of warranty two weeks ago so I do not qualify for support.

  When I replaced the screen I followed all standard procedure to replace any screen,

  But for some reason, now, the screen didn't come on come (everything works when plugged into HDMI).

  There is no backlight or image on the screen, I tried mounting the old screen and that also does not work.

  Any help at all would be much appreciated.

  Thank you all,

  Gavin

  Hello

  Are you sure that the new screen is OK and compatible?
  The screen is connected correctly?

  I guess there is nothing wrong with the motherboard or the graphics chip because the external monitor seems to be OK.
  That's why I think that it s to display either a connection problem, or maybe you used wrong or defective.

• Peripheral Audio USB-Mulit-channel has a driver problem and PnP device problem.

  I try to use the blue ice pre - amp for recording. Under channel-Mulit-USB Audio Device, device status, it displays "this device cannot start. (Code 10) "once I start the troubleshooting process it shows that even after reinstalling the driver it still does not work and that there is a problem with the device PnP I already tried to uninstall the driver and restart my laptop to let windows try again but nothing works.  Please help D:! Thank you all very much! :]
  -Kyle

  Hello

  1. is this problem limited with a specific USB device?

  2. it worked before?

  3. using this unit for the first time on this computer?

  4. the other USB devices work properly?

  Method 1: Run the troubleshooter and see if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. You may need to update the chipset drivers and the USB controller

  Follow the given article below for more information.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  In addition, update the driver from the manufacturer's Web site and see if it helps.

  Method 3: Uninstall and reinstall the USB drivers and check if the problem persists

  1 disconnect all USB devices except the USB keyboard and mouse.

  2. click on start and type device manager in the start search box and press ENTER.
  3. Select the Device Manager and a pop-up window will Device Manager.
  4. click the + on controllers USB Bus to develop it.
  5. right click on all controllers USB and USB Root Hub that is listed, and select uninstall.
  6. restart the computer.
  7. plug in the appliance and check if it works.
   
   
   
   
  I hope this helps.

• Microsoft ISATAP ISATAP #2 and Teredo Tunneling adapters have driver problems, and they could not be resettled. Help, please!

  Microsoft ISATAP ISATAP #2 and Teredo Tunneling adapters have driver problems.  I tried to correct by using Troubeshooter and the Device Manager, but not luck.   The computer was upgraded to Windows 7 Ultimate this year. Help, please!

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520

  http://www.Vistaheads.com/forums/Microsoft-public-Windows-Vista-General/27512-terredo-tunneling-etc.html

• virtual miniport card wi fi has a driver problem AND keyboard filter does not have a pilot. When I trouble shoot for first problem I code 31__

  My virtual miniport card wi fi a driver problem, when I trouble shoot it said windows cannot reinstall pilot 31 code.  And the filter of my keyboard doesn't have a driver!  It is a laptop brand new which had no problem a few days ago.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And don't forget, it is under warranty.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A500-1F4 - nasal sound, display driver problem and dead pixel

  * Problem 1: *.
  Sometimes its stuttering 2-3 seconds when listening to music or playing games. Once, when it computer freezes and I had to restart

  * Problem 2: *.
  Sometimes the screen freezes, it turns black and after 2-3 seconds, he returned. And a notification appears at the bottom right that saying "Nvidia driver has stopped working and recovered 187,98'."

  * 3.* problem
  I have a dead pixel on the top right of the screen. It looks like red on a white background. (tried trouble programs and massage screen)

  Is it possible to solve these problems? I trust mark 'Toshiba', but I don't know if I bought another laptop I would not encounter these problems.

  Post edited by: usrobotics

  Hello
  I have also this problem such as a freezing of the computer and the notification "driver Nvidia has stopped working". ". It's because of the display driver and we can nothing but just wait when Toshiba will broadcast a new, improved driver.
  That it was a dead pixel, you can read about it here

  http://www.WikiHow.com/fix-a-stuck-pixel-on-an-LCD-monitor

  It is for Lcd screens, but can also be applied to the display of the laptop

• Qosmio F10-36: drive problem HARD and Qosmio player installation

  I bought the Qosmio F10-36, made in Germany for the Russia and CIS. After that 6 months, it was repaired due to problems with the motherboard, it was totally changed in the video card and now there are problems with the hard drive after the start of the very slow work computer and finallly collapsed.

  We had to format the hard drive and you must now install the player, Qosmio, which was also removed during this work.
  How we achieve this, I'm too far from the nearest service centre.

  frankly I am fed with this qosmio upward!
  If any chance that I would go back to toshiba filled like never such problems before.

  In my opinion maybe call and ask why this happen just to hear what they have to say about it.

  In any case, I recommend you to follow:
  If possible, back up all your data on an external device, such as USB key or HARD drive
  The first installation with recovery CD Qosmioplayer delivered Qosmioplayer
  When finished install OS using supplied recovery DVDs and you'll have the factory again settings

  After this check the unit carefully to make sure if there is just like before.

• Qosmio F750: Ghosting can mean faulty display?

  Hello!

  I have a quick question: I'm a little unsure if the effect of persistence I place on my F750 (model without glasses) can be the result of a defective screen. If I run the utility x-tune in the "professional" mode, I see a green clear picture by closing one eye and if I close the other eye, I indeed see a (supposed) red zone, but there are still some huge "greenish" visible areas. Almost the right quarter of the screen will flash green. If I set the effect such as told by the application, the effect won't get worse.

  According to the follow-up face window, my eyes is detected correctly and I use also sufficient lightning and distance of visibility.

  So, what is the experience of what other users get? Do you see areas clearly green and Red? How about ghosts in movies or games?

  Hello

  I think that ghost effect is nothing unusual in the vast world of LCD Panel.
  I have a 42 LCD TV and a slight ghosting effect is visible... more inside display area
  I've been reading about such effect, and it's nothing unusual. Sometimes it s more visible on a black background.

  Not sure about your problem maybe you should get in touch with a Toshiba ASP in your country to check

  But the effects of ghosting are common for LCDs regardless of production or product...

• Issue a Qosmio X 505-Q870 - BSOD and display

  I get BSOD frequently (at least twice a week) and hope someone could help me with this. Unfortunately I do not have the minidump files, but I don't know the names of the files that caused it... Is the reason why I did not have the minidump files - the minidump file gets deleted after that I reload, I did not delete them manually...

  But I got a copy of the file when I had last week and I sent it to an admin in another forum, that's what he sent me

  "caused by:

  2: kd > lmvm nvlddmkm
  start end module name
  fffff880'0f4ec000 fffff880'10147300 nvlddmkm T (no symbol)
  Loaded symbol image file: nvlddmkm.sys
  Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
  Image name: nvlddmkm.sys
  Timestamp: Thu Mar 17 09:08:59 2011 (4D81C19B)
  CheckSum: 00C6915C
  ImageSize: 00C5B300
  "Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4"

  and yesterday, after the bsod, I ran to see blue screen and it showed that 2 files were involved.
  1 dxgmms1.sys
  2 dxgkrnl.sys

  I guess it has something to do with the VGA, I also sometimes have these boxes of weird colors on my screen and when I move around the window that is open at the time, she disappears - these boxes began to appear on and outside of the time that I started using the laptop... Please note that I have the latest VGA drivers installed...

  Another issue that really bothers me is once the display is switched off automatically, I can't put it back on, I have to restart the laptop! After the screen saver, I put it to disable the display in 15 minutes, so when it is off, can not get the screen to the top... but I've heard fans work so I know that the pc works... even USB devices work... but what I do, the screen is just blank... It was not always like that, it happened after updating drivers in February (I think) and I kept the drivers up to date since then, but this problem persists...

  Really hope that someone will be able to give a quick solution and permanent on this subject. I bought this the United States and who are currently living in Australia, do not know the validity of the warranty...

  null

  If you see blocks of colors on the screen while using the provided Toshiba display driver, which usually indicates a problem with the hardware.

  I would like to send the phone in for warranty repair in a center of Service from Toshiba.

• Upgrade the HARD drive, memory and display on Satellite A30 921 driver

  I got a model a30-921, satellite phone for two years now. I would ask someone who could help me how to put my hard drive from 40 to the majority and the memory to 1 g. and also where can I find the latest driver for ati mobility radeon igp 9000.

  Thank you and looking forward to here from you soon.

  Hi Remelito,

  I use a 80 GB hard drive in my SA30 and I suspect it would probably work with a 100 GB drive. However, as portable hard drives tend to suffer ruptures busiest I think their close office 80 GB is perfectly o.k. for me. I tend to have 25-30 GB used with the rest of the temporary files during editing of the videos etc. The hard drive in the A30 is usually under the optical drive to remove all first in order to access the hard drive.

  Your A30 can be upgraded to a maximum of 2 GB of RAM in two slots. Currently, you will have 2 X 128 MB or 2 X 256 MB modules of RAM installed. You can get the modules of memory in the sizes of 128 MB, 256 MB, 512 MB or 1 GB. the following URL provides information on reference numbers (the United Kingdom site), but you can Google for a suitable provider.
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=11505&ft=m&St=3

  Toshiba unfortunately do not provide regular updates to their display drivers (at least in my experience). Like you, I have an ATI Mobility Radeon 9000IGP in my SA30 and I resorted to a driver Omega catalyst in order to play newer games. I ran this Omega driver for many months now with still no Bul. You can obtain this driver from: -.
  http://www.OmegaDrivers.NET/

  Kind regards

• Driver problem and impossible to uninstall or update

  Dangerously, I installed a remote client software and later found out that it does not yet support win7. Somehow it kind of screw to the top of my LAN and the wireless interface drivers. I managed to fix my wireless and LAN, but some drivers still do not work and I can't uninstall or update. They touch my WAN and VPN connections at the moment.

  The remote client software that caused the problem was customer remote Netscreen Juniper Networks.

  The driver that is messed up are:

  Miniport Wan (IP) - Miniport of Enhancer deterministic network

  Miniport (Network Monitor) Wan - deterministic deterministic Network Enhancer Miniport

  ------------------------------------------------------------------------

  Device status:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  ------------------------------------------------------------------------

  Is there anyway I can delete them?

  Hi Nombre20,

  It seems that Citrix has a process of support to fix this problem:

  http://www.Citrix.com/lang/English/LP/lp_1680845.asp

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 420 HP 2000 ca: driver problems and hotkey on a new install of windows 7 on a HP 2000 420 ca

  Hello, new here, long story short:

  LAPTOP MODEL IS: HP 2000 420AC

  1 REINSTALLED A BRAND NEW HOME FOR WINDOWS 7 64 BIT.

  2. DOWNLOADED/INSTALLED ALL THE DRIVERS ON THE SITE OF HP FOR THIS MODEL.

  3. THE DRIVERS WIFI/wireless connection would NOT MOVE, I GET a MESSAGE READING "802.11.a/b/g/n wireless device not found adapter. The device may not be present or could have been ejected/disconnected from the system. Abandonment of the installation, please insert the card and try Setup again."

  The wireless card was not removed from the system, in fact, the laptop was never even opened.

  4. THE SHORTCUT KEYS DO NOT WORK TO TURN ON WITHOUT WIRELESS/WIFI, OR VOLUME CONTROLS, SCREEN BRIGHTNESS OR... THERE SEEMS TO HAVE NOTHING TO DOWNLOAD/INSTALL IN THE LIST FOR THOSE NOT MORE, A LACK OF FUNDAMENTAL TO THE SYSTEM. WITHOUT IT, NO WIRELESS (ETC.), PERIOD. THIS ISN'T LOOKING GOOD SO FAR.

  5 TIPS IN THE SITE WEB/FORUMS TO INSTALL "HP WIRELESS ASSISTANT" IN THE LIST OF AVAILABLE/SUPPORTED DRIVERS, BUT IT DIDN'T THERE HAS NO "HP WIRELESS ASSISTANT" IN THE LIST TO DOWNLOAD. AND TO DOWNLOAD IT DIRECTLY TO THE PAGE OF THE WIZARD ITSELF YOU MUST HAVE THE COMPUTER OPERATED BY CONNECTED DIRECTLY ONLINE TO INSTALL, YET THE COMPUTER ITSELF CANNOT CONNECT ONLINE IN THE FIRST PLACE, WHICH IS A MAJOR CONTRADICTION AND IRONY IF YOU ASK ME... «TO CONNECT ONLINE TO REPAIR US DIRECTLY SO THAT YOUR COMPUTER CAN APPLY ONLINE...» ». HUH?

  QUESTION: SOMEONE HAS A FOOLPROOF METHOD, THEY KNOW OF A WIRELESS ON A NEW INSTALL OF WINDOWS 7 ON THIS MODEL/S?

  MAYBE THE SITES THAT HAVE BETTER BACKUPS FIX HOTKEY DRIVERS AND WIRELESS AS THE HP SITE ITSELF?

  THANK YOU IN ADVANCE.

  RUSSELL.

  Hi, Russell:

  He has a Ralink WiFi card you find the parts list for your laptop.

  So, this is the driver you need for this card...

  This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

  File name: sp56942.exe

  HP wireless assistant software is not applicable to your model.  Your model uses the most recent software HP connection manager, which you may need to install in order to activate the wireless card so that the drivers can be installed.

  This package provides the connection manager HP for the notebook models and operating systems.

  File name: sp54630.exe

  The driver hotkey, you need is this one...

  This package contains the Quick Launch software HP, which allows the special function keys on the laptop to program models. For example, the software of HP Quick Launch allows users to press the Fn + ESC keys to view system information. This software works with supported operating systems.

  File name: sp56929.exe

  So that the brightness keys work, you must install the graphics driver first.

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp54988.exe

• Pavilion dv6-2140ei. Missing driver problems and blue screen.

  Hi, I'm florent

  I have problem devices on my PC which I think might have caused the blue screen issue.

  Base system device:

  1. PCI\VEN_197B & DEV_2383 & SUBSYS_3659103C & REV_00\4 & 91078216 & 0 & 03E4
  2. PCI\VEN_197B & DEV_2383 & SUBSYS_3659103C & REV_00\4 & 91078216 & 0 & 04E4
  3. PCI\VEN_197B & DEV_2383 & SUBSYS_3659103C & REV_00\4 & 91078216 & 0 & 01E4

  MEDIA:

  1. HDAUDIO\FUNC_01 & VEN_10DE & DEV_000B & SUBSYS_10DE0101 & REV_1001\5 & 423D 040 & 0 & 0001
  2. HDAUDIO\FUNC_01 & VEN_10DE & DEV_000B & SUBSYS_10DE0101 & REV_1001\5 & 423D 040 & 0 & 0101
  3. HDAUDIO\FUNC_01 & VEN_10DE & DEV_000B & SUBSYS_10DE0101 & REV_1001\5 & 423D 040 & 0 & 0201
  4. HDAUDIO\FUNC_01 & VEN_10DE & DEV_000B & SUBSYS_10DE0101 & REV_1001\5 & 423D 040 & 0 & 0301

  Unknown device:

  1. ACPI\ENE0100\4 & 23038812 & 0

  Please help, I would really appreciate it.

  Hello:

  Here are links to the drivers you need...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100095-3 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4105332 & sw_lang =

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75510-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4105332 & sw_lang =

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75076-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4105332 & sw_lang =