Magnetic switch defective Satellite A200 - 1C0

Similar Questions

• Satellite A200 - 1C0 - overheating and close

  Hello world:

  I ve got a Satellite A200 - 1C0 PSAE0E and since one month, it stops due to overheating (hybridized with hot CPU). The fact is that when I restart the computer to the BIOS screen, fan of the processor begins to work at a very high speed (to cool the CPU), but to start Windows to start the fan suddenly stops, and the fact is that the CPU is always at 78 degrees celsius.

  I tried updating the BIOS, reinstall windows recovery partition and all components, but it does not solve anything. Also tried to install Windows 7 and still nothing and windows Xp and still nothing. I Don t know what else to do. Help will be apreciated.

  Thank you very much.

  Hey,.

  To properly clean your cooling system, see this article from Toshiba:
  http://APS2.toshiba-tro.de/KB0/HTD7A01ZZ000AR01.htm

  Another reason could be the old thermal grease and maybe, it must be renewed. If t, you can do it yourself, ask a technician for laptop help! :)

• Satellite A200 - 1C0 - no sound after installing XP

  Hello

  I have a problem.
  I have a Satellite A200 - 1C0.
  The original OS is Win Vista but I change Win XP profesional of Pentecost.

  I installed all the drivers, but it does not recognize my sound system.

  He told me that I have no hardware installed.

  What can I do?

  Hi dude

  Looking already here in the forum?
  I presume you didn't!

  This forum is a very large database and contains numerous threads on the same themes.

  IF your question has been discussed here 10,000 times.

  Check this one:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=112885

  Concerning

• Satellite A200 - loses the battery, switch off the power

  I have a relatively old Satellite A200, yet almost all inside is new except the battery. The battery has a very short life, but that's because its old. Recently the computer started to suddenly lose the battery, so the charge light stays on, the battery light turns off and the battery icon said "plugged in, not charging." However, the computer still work on battery power. If I see it at the time, then by removing and replacing the charger repeatedly, I can start it load again, but if I am not it switches off without warning. Since the battery life is now less than a minute which often.

  I don't think that the problem is with the charger because it always shows the charger is plugged in, and when the computer is off the battery light is always on when it is plugged. I had a problem with the power connector, but if the motherboard was recently replaced so I don't think that's it either.

  If someone could help it would save me a lot of frustration, thank you.

  Hello

  At first, I must say that you should not be frustrated. Problems with consumer products are normal, and each of us has problems with laptops, televisions or other electronic product.

  Let's see what you can do about it.
  Your description is OK, but what I want to know is follow:
  When you remove the battery can work on your laptop with no problems (start work, cut)?

  I also think that the battery is too old and I presume it's troublemaker in the history. It is not easy to explain what behavior flashing if you have a defective hardware or old coin inside.

  Maybe, you need to buy the replacement of the battery and check the features for laptop and the battery, just to see if everything will be OK again. If you will be faced with the same problem again then we can discuss what may be the problem.
  In my opinion only a reason for this could be electronic power supply.

  What do you think?

• How know to what Satellite A200 defective adapter belongs?

  Hello

  I have two toshiba (Satellite A200-*) computers laptops & accessories (the two Portuguese).

  One of the AC adapter does not work since last week.
  Flow to ASP.
  But how do I know which defective laptop that belongs?

  They look exactly the same (http://i32.tinypic.com/2wd33n6.jpg),
  I only see differences on the other side, in the barcode (a GMR200606EU0-A02-085D-10385, the other GMR200606EU0-A02-088F-56394).

  I can't find any corresponding information with adapters, or at the bottom of the laptop or the original box.

  Just a guess, maybe it's a way to send information to both laptops and adapters to Toshiba, so they can tell me which is the correct...

  Can someone guide me?
  Thank you.

  Hello

  Usually it s no matter which adapter that you will use.
  Important only the values of output; The Volt value must be exactly the same.
  So if your computer supports 19V you take a power adapter 19V.
  The value of intensity can be a little different, but if two adapters support exactly the same values, then you should not be worried, both can be used

• Satellite A200-1s 5 charger (AC adapter) is defective

  Hello

  Several days ago my cell phone charger started broadcasting a few strange sounds like an ACE with a variable harmonic frequency. And at the same time that he stopped to load laptop.
  It's my favorite laptop and I'm really happy with it except this incident with charger.

  Laptop:
  Model name: SATELLITE A200-1 s 5
  PSAE6E-07903DRU model number
  Serial number. can be sent on request

  Adapter AC/DC (charger):
  Model: PA3290E-3AC3
  RN193 V85
  Output: 19V 6.32 A (6, 32a)

  Please let know us where I can buy the same charger or what model of charger can replace it? It's really unique and I can't find it on Amazon or Ebay.

  Hello

  You have posted a reference number for this adapter.
  Google just for this part number and I m sure you will get offers online.
  If you can get one from a Toshiba authorized service provider in your country.

  Welcome them

• Re: Can Satellite A200-14 - I switch the RAM to 4 GB?

  1. my laptop "Satellite A200-14" series has 2.048 MB RAM. How much does it cost to improve to 4,096 MB RAM?
  2. can you change the RAM yourself?

  Thank you
  Johannes

  Hello!

  I put t know how much it costs to upgrade to 4 GB of RAM. This according to the modules that you can buy and where buy you it.
  Upgrade the RAM, you need modules with DDR2 (667 MHZ) specification.

  And change the RAM is quite easy. Consult your user manual, you can find instructions and pictures how to do this. ;)

  Good bye

• Satellite A200: no mode 'sleep' and ignores switch screen off time.

  I recently bought a Satellite A200. It does not have a 'sleep' mode and power settings do not seem to work. for example, I put the screen turns off after x minutes and he ignores it.

  Any help gratefully accepted.

  You have a series of European Satellite A200 If Yes, then I don't know if the 0 button would recover your m system
  The recovery CD would be necessary in your case.

  But by pressing 0 and using the recovery CD would be to format the HARD drive. So in both cases the data backup would be necessary.

• Re: Satellite A200 - 14 d - cable defective screen or something else?

  Hi, guys. :)

  I'm having a problem with my display. I don't have an external display to test on so I have to give the service a go because I don't want to buy the part after part and replace it with my 'old' just to know that the problem is not caused by the latter. That said, here is a more detailed description of the source of my headaches:

  More than 3 weeks ago (yeh, that much!: D) the backlight of my screen (Toshiba Satellite A200 - 14 d) turned black. "No worries!" I thought because I had 2 cases before replacing the inverter Board. If things were really that simple... * sigh * I bought a frequency inverter making sure that is the problem (I can see what happens on the screen only if I have a bright source of light pointed in his direction - this is what made me think that the problem comes from the Commission of the inverter).

  I replaced the inverter, but to my great disappointment, the bakclight does not turn on or at least not for long. I noticed that there is light in the lower right corner of the screen. Once I disassembled completely my screen and a large part of the laptop itself, I have riddled the cables a bit and now if I don't move around the screen and put it in a special position backlight turnes on until after load of the GRUB bootloader. But sometimes it lights. So obviously this isn't the backlight itself (phewwww) for when it is activated, I can see the entire screen and there is a bright light everywhere.

  So before considering service I want to have a diagnosis of my own (with your help of course: D) and see, just for the record, if I'm right.
  As I wrote before - I don't have an external display to test these things. I can play movies and games without a problem (it's - regardless of the fact that I do not see a thing without a flashlight in my hand into account: D).

  So the omho problem is either the motherboard itself (which I can test with an external display :() or cable.
  In view of the facts and experiences, I did and described above, I think that cable is the source of all evil.

  See you soon,.
  RBA

  > As I wrote before - I don't have an external display to test these things. I can play movies and games without a problem (it's - regardless of the fact that I do not see a thing without a flashlight in my hand into account: D).

  Well, the backlight is controlled by FL inverter s thereby
  If the FL inverter didn t solve the problem, then there must be problems with a screen itself

  The external monitor would check if the problem is related to the graphics chip or the screen itself, but if you have no external monitor then I would recommend a visit to a downtown computer technician

  I mean, it is best to check the parts first before replacing something without knowing if the part is really affected you know

• Satellite A200-1AE: sound from speakers when headphones are connected

  Hello. Sorry for my English.

  I have problem when I started a player (winamp player or a movie or a game with the sound) and I want to change the sound from the speaker to the helmet by plug them into the headphone jack. The sound is still speaker.

  So I just restart this player or the game and then sound is switched to the headphones.

  So in sum up: when I want to listen to the sound of some player I have to plug in headphones first and then start the player in order reverse, the sound is not switched to the helmet line.

  In other laptops with Vista I have check this problem is not to happen.
  Do you have any suggestions?

  Hello Pawel

  I have the Satellite A200 too preinstalled with recovery DVDs. I was very curious and I tested it on my laptop. In my case everything was OK. Through the use of headphones, Laptop speakers are automatically TURNED off. Remove helmet speakers work again.

  I am really confused, and it is really not easy to say what the problem is here. AFAIK in headphone plug it is small, and through the use of headphones this past should disable Laptop speakers. All you can do is check if it happens after clean OS installation, maybe update the BIOS or install the latest driver sound.

  Sorry, but I don't see any other possibilities. If anything maybe you must contact the service in your country. I really can't imagine that this little mixer may be defective but service may only do a check.

  Bye and good luck!

• Satellite A200 - no sound using headphones

  The headphones not cut the speakers when connected to Satellite A200 - 14 D. No sound in the headphones.
  Could you please help me?

  Kind regards
  Aurélien

  Hello Aurelien

  I don't think driver update will help and it's probably mechanics problem. In the headphone port, there is little switch that should disable the functionality of s intervening every time when you want to headphones.

  Sorry, but I don't think you can do something alone. With short words: I think that the helmet is defective.

• Shaking image on the external monitor when the Satellite A200 is running on AC

  Hello

  I have this problem that drives me crazy... I bought an external monitor for my laptop Toshiba Satellite A200-1 9 s, but the problem is that the image on the external monitor, shakes. I tried another monitor, the same, another cable, same problem; the only way to stop it is to unplug the AC of the laptop.

  I also tried to move the monitor further away from the laptop, but nothing.
  I can stop shaking so hard that if I switch to the profile AC from FULL POWER to save power... but even with this image is still shaking a little.

  So basically there is a magnetic field around here, probably in the portable, which makes my picture shaking like crazy... someone knows how to stop it?
  TX

  Hello

  Hmmm...
  I don't think it has to do something with magnetic fields.

  Cause she is related to the energy consumption of the computer, it seems that there is a problem with the AC adapter.
  If he needs to deliver all the 'juice', this is capacitors to keep absolutely stable voltage may be too low.
  These instabilities (with the frequency of 50 Hz supply) can parasitize the signal on the screen.

  A solution for this?... If you know how to solder some fat capacitors somehow between the two...

  Or:
  It is a grounding problem
  I have never heard of such problems with the LCD (VGA monitors?) monitors. Generally, this is the case when you use an analog video output,
  leading to no color on TV.
  You have an annoying hum when you connect the audio output to an amplifier? It would be a sign for it.
  I had such a problem and solved by plugging my laptop on the sector on another circuit in the House as my audio devices
  So experiment with it.
  First: unplug all the other stuff (printer, Poles, antennas, all) these are unpleasant problems with a lot of possible interference.

  Let me know!

  Welcomes Matz

• Satellite A200 screen backlight is disabled

  I'm having a problem with my Satellite A200.

  When the screen is opened, the backlight is disabled. You can vaguely see the screen keep it turned on, but it is too small to read.
  When you close it, you can see the screen backlight turns on, it stays on for just less than one second when you re - open the lid, and then turns off again.

  I guess that it has something to switch the lid being faulty.
  Can someone suggest solutions.

  Thank you very much
  Anthony

  This part of the message is very interesting:
  > You can vaguely see the screen keep it turned on, but it is too small to read.

  According to your description, you can see the screen and eventually the office too, but the entire screen is very low as behind a thick fog.
  Could this be just?

  Well, I think that this problem could be linked to the failure of inverter FL.
  The FL inverter is a tiny part hidden behind the frame of the screen and it controls the backlight of the screen s.

  In my opinion, this part should be checked by a technician for laptop.

• Satellite A200-28R - new 500 GB HARD drive not recognized

  Hi all!

  The BIOS cannot recognize my new 500 GB SATA HARD drive. When I connect it to the laptop, BIOS says "No device" in the drive options. Tried jumper allows you to change the interface of disc HARD SATA-1, but without effect.
  How can I force the BIOS to recognize?

  Toshiba Satellite A200-28R
  BIOS version: Phoenix v.2.60 for Vista
  HARD drive: Seagate 500 GB 7200 RPM SATA

  BTW: my old 250 GB HDD works fine

  Hello

  Have you tried the drive in another computer?

  Maybe your new drive HARD isn t working properly or defective so use another rnotebook to test it or request a replacement HARD drive.

• How to share an internet connection broadband on the Satellite A200-1VG

  Hello
  I am very new in the world of laptops, 3 days old. In fact, I have a desktop computer (the OS is XP Professional) and just bought my self a Satellite A200-1VG (the OS is Vista).
  In my view, is it possible for 2 machines to share a connection high speed, but how I do not know. I must admit to be pretty ignorant when it comes to technology (you have probably gathered that now) and I ask that any given notice will be given in the language too technical.
  Thanks in advance for a novice.
  EGP

  Hello

  Of course, you can share the internet connection with 2 computers.
  If you have a WLan router, you can connect a computer to the LAN port and the laptop can be connected via Wireless LAN.

  You can also connect two computers to the LAN port. Some routers support two (or more) of LAN ports and assign TCP/IP addresses automatically.
  If your router supports one LAN port you could buy a Hub (or switch) for more LAN ports and connect multiple computers.

  Lastly but not least you can connect to the laptop of desktop PC, but the PC needs to be equipped with min 2 LAN cards.

  I would recommend a little goggling for more details. I m you will find some useful articles.

  Good bye