MAHelper asks... What is it?

Similar Questions

• My iMac does not start correctly. Instead, I just a gray screen. Safe mode starts, it's ok. No problem. So I ask what next step can I try? Thank you very much

  My iMac does not start correctly. Instead, I have a gray white screen. Safe mode starts, it's ok. No problem. But not in safe mode, only grey screen again.  So I ask what next step can I try? Thank you very much and sorry for my bad English.

  Reinstall El Capitan without erasing the drive

  Make sure that you have a current backup before continuing.

  HD recovery start:

  Restart the computer after the ring, press in and hold the COMMAND and R keys until the menu screen to appear.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

  In the future please post in the appropriate forum. Your question is not related to the developers forum. I will take care of moved it.

• performance issues. I checked something who asked what I wanted at the start. So I can't access anything whatsoever. Any suggestions? THX.

  I went to system security - find and resolve a problem-check performance problems.  I checked something who asked what I wanted at the start.  So I can't access anything whatsoever.  Any suggestions?  THX.

  Hello

  • You receive an error message?
  • What exactly are you can't access?
  • What version of Windows are you using?
   
  You can refer to the following steps:
  Step has.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows 7.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step B.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

• I would like to ask what is the official number of built for windows 7 tnx

  I would like to ask what is the official number of built for windows 7 tnx

  Hello Goka86, this is 7600. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Computer does not start up___Can I download this file from the Microsoft Web site. I put the XP CD in and it starts downloading files but it asks what windows installation I want to and don't gives me one option other than press "Enter" to abandon.

  My laptop does not start at the top. It indicates that the following file is missing or damaged WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  Download this file from the Microsoft Web site. I put the XP CD in and it starts downloading files but it asks what windows installation I want to and don't gives me one option other than press "Enter" to abandon.

  See if anything here helps-

  How to recover a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  Install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654

  See also

  How to Troubleshoot Registry Corruption issues
  http://support.Microsoft.com/kb/822705

  How to fix a missing or corrupt Windows\System32\Config\System file
  http://xphelpandsupport.MVPs.org/how_do_i_repair_a_missing_or_cor1.htm

  TaurArian [MVP] 2005-2010 - Update Services

• I have windows vista and when I click on a shortcut on the desktop I have a pop up asking what file to open it with. In order to open the file I find the actuall file.

  Original title: registry exe problem

  I have windows vista and when I click on a shortcut on the desktop I have a pop up asking what file to open it with. In order to open the file I find the actuall file. This also occurs when you download the software, which makes it difficult, because the file is not on the pc yet. All solutions?

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  I hope this helps. Good luck.

• When opening a program, such as system restore, it asks what program you want to open this program with ie adobe, yahoo, internet Explorer

  When you open a program, such as the system restore or turbo tax it always ask what program you want to open this program with a list of options such as the Adobe reader, internet explorer, yahoo Messenger, etc..

  is there any solution for this?

  Hello

  The issue seems to be with the file association so corrupt that I suggest you run the fix it or follow the manual procedure provided in the link below to fix the problem.

  http://support.Microsoft.com/kb/950505

• Applications running automatically, they ask what program to be open in

  I have no idea what happened, but now whenever I try to open an application (Internet Explorer, Windows Media Play, whatever it is) it does not work, he asks what program I want to open it in. I found that if I right click on it and select "Start" it works, but I don't want to spend my life to do this whenever I want to check my e-mail, facebook, or simply listen to the music. Anyone know a fix for this? It's really annoying.

  Hello

  Try the system restore before it happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  Its control panel - backup and restore center - left upper repair Windows

  SO which opens also to use the below to execute.

  Start - type in the search box-> rstrui.exe CONTROL the top - top - right click RUN AS ADMIN

  or use start - computer or Windows Explorer to navigate to

  C:\Windows\System32\rstrui.exe

  Top - right click RUN AS ADMIN

  =====================================

  To run a particular program until get them you all back to the normal fair use start - search and type in the
  program name or the name of the executable file - OR use start - computer or Windows Explorer to access to the
  program, and run it from there.

  Define your main program associations, and then you can edit any type of file to the correct program.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  How to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html

  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  How Unassociate a Type of Extension file in Vista and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html

  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• All exe files ask what program to use to open it with

  I just removed a virus on a computer Windows 7 Basic. Now when I try to open any exe file; I get the pop up asking what program to use to open the file with. It comes to any program including internet explore.

  Thank you for your help

  Hi RichCarlson,

  Follow the steps in the section "Let me fix it myself" to resolve the question of:

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

• 'Open with' pop up at startup and during the session asking what file to open CHKUPD with. CHKUPD has no extension. Search does not find it.

  My problem is similar to the question asked by EamonnO.  Start a 'open with' screen opens asking what file to open chkupd with.  I think that hit "Cancel" would put an end to the action.  He appears periodically during my session on the computer or watching a movie.  I don't find the file using search.  I don't think that this means Daemon Tools because I never downloaded the program.  Some recent downloads include "Free File Viewer" and "Search for free Extension".  I have Vipre AV and System Mechanic running on my computer.  The situation may be harmless, but it is sure agrivating.  Thanks for any help you offer.  George

  Hello

  I had the same problem and there to remedy I just open the control panel and open then "Add / Remove programs.  The popup is apparently caused by a free File Viewer program.  I removed the program by clicking on the button Delete and the problem disappeared.  The free file viewer comes with a conversion program free .mp3 and seems to be completely unnecessary (I never needed the viewer of the file and open it with popup that was originally was boring and sometimes even nervewracking.)  If you do not have to uninstall programs of assistance, just the viewer of the file that comes as a free supplement program (problem).

  Once again, removal procedure: click on 'start '.
  Click on "Control Panel."
  Double click on "Add or remove programs".
  Click on "Free File Viewer" in the list of programs
  Click 'delete '.

  After this, the 'chkupd' open with popup when it stops appearing.

  Craig

• Can I ask what's happened on the Oracle Forms forum, after reading it for 20-odd years it seems to have disappeared?

  Can I ask what's happened on the Oracle Forms forum, after reading it for 20-odd years it seems to have disappeared?

  I just get a message saying that the makers of the element do not exist, it can havbe been deleted when you try to access the page to:

  https://community.Oracle.com/community/Developer/English/development_tools/application_development_in_pl_sql/forms_2

  TIA

  Ady

  Ady,

  Apparently the people who helped create this software was last updated forum decided to restructure the many places as well as simply a change of software...

  ... but could not be bothered to document changes, they went to the URL for the new locations.

  FORMS are always, like REPORTS.

  They were buried at the following locations tree:

  All locations > Database > Oracle + Options database > SQL and PL/SQL > PL/SQL application development

• How do you open the downloaded Lightroom6 file. He asked what program to use to open it.

  How to open the downloaded file Lightroom_6 LS11?

  He asked what program to use to open it.

  Just to get back to you. It was an expensive trip but I thought about it and it is actually very simple. For some reason, the ".exe" was omitted from the file. When I renamed the file with the name extension, he began the launch. Incredible. In any case, thank you for taking the time to help me.

• Hi, I'm on cloud creative $49.99 for the month of subscription and I am told it includes Typekit, but when I try to log it asks what plan I want to?

  Hi, I'm on cloud creative $49.99 for the month of subscription and I am told it includes Typekit, but when I try to log it asks what plan I want to?

  Please see

  • Adobe Typekit Help: Getting Started with Typekit and Creativ...
  • Adobe Help Typekit: Typekit and creative cloud
  • Using creative cloud | Add Typekit fonts

  Hope this will help you to use typekit.

  Kind regards

  Hervé Khare

• I downloaded cs6 and now it asks what to open it with

  I downloaded adobe design and web premium and now, after downloading, it asks what to open it with, what should I do?

  It's true, but you must also download the second file. This is the exe file that you need to start the installation.

  If you have not downloaded, do it and double-click it.

• I want to search in Yahoo, not ask (what I want on my toolbar).

  When firefox updated recently, Ask appeared on my toolbar and has become my default search engine. I absolutely hate to use Ask because it does not perform as well as Yahoo. I have Yahoo selected in the preferences of Firefox as my default search engine. I selected in the search window near the Web site address window. Yet, whenever I search anything, it's in Ask. I want to not go. I'm at school and it became a huge trouble using Ask. How can I permanently get rid of Ask and go back to what Yahoo as my default search engine.

  Hi tgreenhow,

  It seems that Ask.com has completely diverted from your PC. How frustrating!

  It could be that the toolbar has been installed quietly while you were installing a different piece of software.

  This article has some useful instructions on how to remove the toolbar and reset your Firefox profile:
  http://malwaretips.com/blogs/remove-ask-toolbar-and-search/

  Could you please try these instructions and let us know how you get on?

  It will be useful.