Sansa fuze doesn't recognize the storage capacity all and does not load?

Similar Questions

• Fuze doesn't recognize the MPEG-4 audio layer - any suggestions?

  Fuze doesn't recognize the MPEG-4 audio layer - any suggestions?

  I have loaded a series of MPEG-4 audio layer files on my rocket. I can see them on the "rocket" when I consider my computer but not the "rocket" itself.

  Anyone know what I'm doing wrong?

  Thank you

  Donn

  The Sansa times .mp3, .wma. OGG, FLAC and .wav. It cannot decode m4a or mpeg-4.

  Are downloads of iTunes? Apple doesn't want read you elsewhere on your computer and whatever this dopI little pocket music player they do is called?   M4a and .aac are owners of Apple formats.

  You must extract these files from CDs in mp3, or if you do not have CD you will need to convert m4a to mp3. Download the free media encoder and conversion (transcoding) these files mp4 to mp3 high quality, 192 Kbps or higher. If you use more low-quality mp3 will save you space, but the sound quality will suffer.

  And if you use iTunes to rip a CD, you can change the settings (in Edition/Preferences/Advanced/import music, which differs from the advanced visible tab) to mp3 instead of m4a files when rip you.

  If your files are m4p, the p is for protégés who are protected against copying the files, which means that you're not supposed to move on another device.  The only way to convert is to go into the underground world of pirate.

• Leave my Pro XI of Adobe Acrobat, reading documents and does not load my original CD.  Where can I download the program from the internet and my key code?

  Leave my Pro XI of Adobe Acrobat, reading documents and does not load my original CD.  Where can I download the program from the internet and use my original key Code?

  Acrobat XI, X - http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

• During cleaning after reinstall the update Ver 33 and "Could not load XPCOM" when I run the installer for worm 33 he says "your download was interrupted. Now, what

  Running Windows 7. After Firefox updated to the Version 33 Firefox would not start. Received the message "unable to load XPCOM. Follow the instructions in the forum Firefox to do a clean reinstall. File downloaded from Mozilla.org , using Internet Explorer for Firefox does not work. Deleted the old program file. When I try to run the Firefox Setup Stub file 33.0 continues to stop. The message says "your download was interrupted. I tried to run several times all with the same result. I also made sure I deleted previous downloads before trying to re. Anyone know how to fix this? Thanks for your help.

  Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  • Download the full Firefox installation program and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all.html

  If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.

  • Do NOT remove the "personal data" when you uninstall your current version of Firefox, because this will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but do NOT delete personal data when you uninstall Firefox which removes all Firefox profile folders and you lose your data.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• attempts to send the message that is too long the Outbox - it freezes and does not allow me to delete

  Outbox is trying to send a message too long - can not remove it it freezes and does not

  Windows Mail. Whenever I try to go to the Outbox to erase the messages it freezes the computer.  I even went to tools and checked 'work offline' and it seems to ignore it.

  Follow this article help & Support:
  http://support.Microsoft.com/kb/941090

  t-4-2

• Hello!  I can't connect to the Adobe Story.  It does not load.  The loading screen guard just goes and goes.

  Have tried for hours now and nothing happens.  Does not load.  Can you help me?

  
  Thank you!!

  Hello

  Can you please try upgrading your version of flash player? Who could help

  You can get the latest from http://get.adobe.com/flashplayer

• The CC app home screen does not load

  When I run the CC app on my PC (Windows 7, 64-bit), the home screen does not load.  The indicator of activity just sits there and turns.  It worked before, but not for the last days.  The other screens work very well.  Any ideas?

  Thank you

  Mitch

  Mountain Storm fine arts

  Hi Mitch,

  Welcome to the community!

  If the internet is fine so maybe it's becase of files cloud creatives, please try the steps here described in http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launchin g - cc.html and see if it works.

  Thank you!

  Ankit

• Problems connecting to a projector. Laptop recognizes the new monitor but projector does not display anything.

  I have a Macbook Pro (non-retina display) mid-2012. I have a mini VGA screen that worked throughout the year and all of a sudden, it doesn't seem to work. My computer recognizes the new monitor (screen flickers and flies all content secondary screen) but the projector does not display anything. I tried to reconnect the cable, the cable VGA switch to turn on the projector and turn off, restart my computer and clouds of dust on the connections. Sometimes if I move the connection just that will work, but if I so much as breathe on it or watch funny it stops and I can't get it back.

  Jiggle the cable or adapter is something different, you have a physical adapter or cable problem. Any bit-reversal can help that.

• The thrustmaster ferrari 458 italia does not load on windows 7

  When I have more the Ferrari 458 italia wheel into the USB port, windows 7 says it cannot find a driver for it.

  So when I go to Steam to play Need for Speed and I'm trying to change the options of controller as the steering wheel or pedals, it does nothing.

  I tried to download the xbox to windows ultility and he does not notice the wheel.

  ThrustMaster says it supports games that have the xbox for her controller, it's Need for Speed Shift, one of those games that is not >

  Also why Windows 7 doesn't see the wheel when ThrustMaster says it already has drivers for it?

  Here, any help would be appreciated.

  Thank you

  OK I know this is an old thread, but just in case someone else is watching, so it appears in the control panel under printers and devices, then his job very well, the problem is when you go into a game he dosnt appear like a wheel from thrustmaster, it appears as a gamepad xbox so if you choose your controller it will work very well hope this helps

• I have a problem with the computer is slow and does not file.

  1 of my pc and 1 another laptop, both with same OS - win 7 starter, atom and same ram and Ghz processor.

  The the Task Manager on the two of them performing at about 50%
  I use wifi and same place,
  always pages on my pc are load too late, manyatimes same gmail takes more than an hour to load or load never at all.
  Live TV on my pc crashes a lot and the clarity of the video is too bad, although the same graphics card, wifi, etc. are used.
  Any recommendation to get rid of these problems?
  2. some viruses had infected my pc,
  I tried to scan my pc and the USB with 2 antivirus free and pay different and even contacted the companies and sent them files. But I got no solution.
  On my pc, the files opens, show that a few errors before you open it then on my cell it do not open at all. Only shortcuts are displayed, while the USB is to have 4 GB of data.
  The companies had scanned all files that are intended for them and had recommended some solutions, but none of them worked and I was faced with the same problems.
  It was queries that I had sent to the antivirus company-
  10-20-bitdefender files that are
  > infected. They were initially on my USB, then I connected to another
  > pc. After that, when I connected to my pc, I scanned and that she was
  > no virus. Then the ameliiecouturiaux and the files whatever i seclect opened in a
  > new window and took that wasannoying time. So I copied all the files to my
  > pc, yet once scanned, formatted my USB and then comes the againNow copiedit the
  > problem - all the icons or folders remain the same with the name of the folders but
  > the files inside this foldergot automatically changed and I lost all my
  > data. Now, I can't find any of my files on my pc or my USB. PL send me
  > an email so that I canattach the files and send them to bitdefender. Dungeon of pl
  > secure these files. Some files have an another new error that I had
  > downloaded. More files will be downloaded once I have bitdefender recieveemail to
  
  > that I can answer. PL copy this message in its entirety and add this to your answer.
  According to my knowledge, 2 of my PC are infected and the virus are not getting detected by bitdefender on my PC1 but 4 threats have been detected on the laptop...

  The same files are include the other way on my other pc.

  Whenever I open the files, save option opens and a new file is saved with the file tha but they never get to open in word or powerpoint, only the backup option is displayed.

  The original files are protected by copyright and are lost. PL help me if possible to retrieve and delete all the files once the inspection is completed. You can forward this message to any authorized person.

  Attached files have changed to 1 or 2 k, but there was initially datas in a few MBs.

  201310131003535. I mentioned that somewhere I had formatted the USB key. Just before that, I had copied all files by selecting CTRL A and cut all the files in a directory on my PC. Then I opened the USB and no files were there. But always around 4 GB has been shown as being busy on the USB stick before formatting.
  My pc takes too long to restart, I tried a few 3 - 4 times and no updates have been installed or waiting to install after the 2nd time but when even he took more time than usual to restart and is compared to the other pc taking 2 X the time to restart, but two of them have installed bitdefender. Problem in my laptop toshiba, not pc lenovo, space time with more than 50 percent on the disk processor and Atom c.
  The files on my USB key are automatically replaced by shortcuts and so files open in a new tab and new cases opened are not those of origin who have been saved by me in this matter. Yet once I formatted and scanned, files, pc and USB but still facing the same USB key.
  Problems-

  1. all files are automatically displayed as shortcuts, even if I had pasted the original file

  2. once I click on open, I get an error and then after clicking on ok, some files get opened

  Before sending the email, I had formatted the USB scanned files on my HARD drive and then copied on the USB. The same problem persists. I think that when the files are displayed or open, the virus does something and change his behavior wrongly.

  1 bitdefender watch as new bitdefender is available, I click ok and repair wire starts and then it tells the system to restart.this cycle continues on the race

  2. 2 files are missing (attachment)

  3. could you send me the file by e-mail?  You can also download the link below.

  http://labs.BitDefender.com/

  because the webste or browsers (chrome, firefox) are not respongding.

  4. I could get these 2 points. Browse your computer to locate the removable storage device and right click

  its icon.
  3. in the shortcut menu, point to Bitdefender and select immunize it
  
  drive.
  I am able to open my pendrive ffrom on 1 pc but on my laptop, all the files don't appear as shortcuts 1-2 KB and can not access.
  zwhwenever, I click the icon, the window save under opens for all files.
  on this pci usingbitdefender antivirus am more 2013 16.34.0.1913 downloaded from download.com and the antivirus from bitdefender 60 seconds. 1.0.3.59
  my pc shows the USB key as safe, but laptop with 2 antivirus mentioned above are showing 2 virus - worm.vbs.ch (bitdefender 2013)
  using bitdefendr 2013 more on laptop, I tried to immunize the file but an error was encountered.
  the error is in German-
  Der process nicht auf die Datei zugreifen kann, da sie von einem other process verwendet wird. I closed all the files and tried to immunize the USB of the my computer without having to open the USB by clicking on it.
  Itried to remoe and atach the pendriveagain and even restarted the laptop, but the same error message appeared.
  Properties - 5.10 GB ref 7.89 GB, but when the USB wasopened, all files were only 2 or 3 KB of size.
  1 more problem-i tried to delete the files in quarantine but bitdefender stopped working and went off automatically.
  I copied all the files from USB to pc, they were 2.22 GB, then again, I copied them back after scannig and formatting of topendrive and it was only 1.44 GB
  BitDefender Antivirus 2013 never works and always displays the message to restart the laptop so that it can start working, but it neverstarts. But bitdefendeer 60 seconds work.

  LOL - install software Registry Cleaner to fix damaged or broken registry entries.

  More likely to worsen the situation.

• I click on "SET UP" on my Motorola XOOM and the screen goes black and does not settle. " I have uninstalled and installed the man times. What to do next?

  Cannot install Firefox Mobile o my Motorola XOOM. I have download and start editing the page and the page become black and back can not be configured.

  By clicking on the "Android Zoom" and select "Stretch to fill screen" and restart the tablet. The "Zoom to fill the screen" breaks Firefox mobile and it's a shame Android this suggests for our application on the first run.

  We are working to solve this with the creation of our Tablet UI.

• Realtek card gives the error code 10 and does not work since the change of satellite

  How can I fix the realtek on my computer card. It was the dial upwards, after he took off and replace it with satellite my computer wouldn't access internet
   
  How can I fix the realtek on my computer card. He has been on dial-up, after taking if off dial-up and replaceing with satellite my computer wouldn't access internet. Noted code 10 and realtek does not work. So a please help fix me my computer.

  Hello

  What operating system is installed on the computer?

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  See the following article:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

• Media player lost all music (but not music videos) and does not load the files in

  Player was working fine, then night emptied all music files and now will load all of the files, but will play them if you transfer to an unsavable playlist

  Hello

  Thanks for posting your query in the Microsoft community!

  I understand that Windows media player has lost all the music. I will try to help you with this question.

  Try these methods and check whether it is resolved:

  Method 1:

  Check the settings of the library in windows media player. Steps to follow:

  i. open Windows media player

  II. click on organize

  III. Select Options, select the Library tab

  IV. in the title of the newsletters of automatic support for files

  v. Select only adds the missing information

  Method 2:

  Rebuild the media database and check if that helps. Follow these steps to rebuild the database:

  i. Click Start, in the search box, type in %LOCALAPPDATA%\Microsoft\Media Player

  II. remove the Media player folder

  III. to restart the computer, the Media player folder will be automatically recreated. Check whether the problem is resolved.

  This problem occurs because the Windows Media Player library database is corrupted.

  Method 3: To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.

  3. Select all the files in the folder and then click on Delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  4. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type % LOCALAPPDATA%\Microsoft, and then click OK.

  3. Select the Media Player folder, and then click on Delete on the file menu.

  4. restart Windows Media Player.

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

  We can't wait to hear back on your part.

• The battery of my computer does not load. I changed the battery and I changed the AC adapter, and I always get this message: "0% available (plugged in, not supported)" I don't know what the problem is.

  My computer the battery does not charge.  I bought a new battery and I changed the AC adapter but the battery still won't charge.  This is the message I get:
  0% available (plugged in, not charging) don't know why.

  Hello

  1. What is the number of brand and model of your computer?

  Let us try the steps mentioned below to see if the problem is resolved.

  Step 1:

  a. Click Start; type devmgmt.msc in the start search box and press ENTER.

  b. expand the batteries category.

  c. under the batteries category, right-click in the list of Microsoft ACPI compatible with battery control method and choose uninstall.
  WARNING: Do not remove the Microsoft AC adapter driver or any other compatible ACPI driver.

  d. on the Device Manager, click Action and then click Scan for hardware changes.

  Windows will scan your computer for hardware which has not installed the drivers and will install the necessary drivers to manage the battery power. The notebook should now indicate that the battery is charging.

  Step 2:

  If this does not work, try power cycling of your laptop by following the steps below.

  a. remove the battery from your laptop, and then press the power button to all 15 sec.
  b. now connect to the battery and check if it works.

  I suggest also, please contact your computer manufacturer to see if they have any suggestions about it.

• XP Cd rom error message, code 19. CD rom icon does not appear in the 'my computer' file and does not read the CD.

  Hello, I have tried everything to fix this problem and nothing has worked. I removed the cd-rom drive and reinstalled, I open my registry and remove the filters above and below the exact file, what I was told. I don't know what else to do, nothing is solved the problem. Please help me, I really need to use my Cd-rom for school assignments.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner