Maitenance comes out with the suggestion to delete the shortcunts office, but there is no Norman to do

Similar Questions

• Why can't I print my email body, they come out with the right that is missing.

  When I try to print my emails (gmail) all under the Mail column prints, but the right side is missing. I tried everything I know and nothing works. I can't move it and I can use the print selection. Also I can not print the entire email if it is greater than 1 page.

  The first thing to do is to locate the print on this web page button or the 'Printer Ready' button on this web page. You should see a "page" that shows only an e-mail, without the navigation menu of the site showing on the left side of the page, so that Firefox does only print email and not everything that you are now redirected.

• all my prints are coming out with the word 'project '.

  I use an iMac with Mac OS 10.6 (snow leopard).

  I to printers connected by wi - fi: Office Jet Pro 8500 has more and LaseJet CP1525nw color.

  With the 8500 has more each impression is correct.

  But with the CP1525nw, each print comes out with the word 'PROJECT', no matter the settings (the option "watermark" is already 'OFF' on the print settings, etc.).

  This happens not only with the microsoft office for Mac (Word or Excel), but all prints (for example, work online with my bank account, if I chose to print a statement, he will come out with the word "PROJECT". Even if I save it in PDF format and open the PDF file using the preview or any other PDF reader, it always come out with the word "PROJECT").

  How can I solve this problem?

  Hello again,
  I just ran across this interesting link that another user had the same problem and was able to resolve with an update. The first link below is where you can get updates for your printer. The second is the other thread. Check below and good luck!

  http://goo.GL/rVCXh

  http://goo.GL/0vJxc

• A fix will come out for the problems with the new OS update?

  A fix will come out for the problems... the beach ball twirling, which began with the new update for the OS?

  Writing an effective question of communities of Apple Support

• com Apple.launchd.PerUser came out with the code: 4

  We create a game to run on the mac desktop.

  The game was built using Flash Builder 4.6 on the pc, using Air 3.5 (using Air 3.4 until a few days ago)

  I create the SWF on the pc and then copy it on in the mac mini - (which was running OSX 10.7 - updated updated yesterday at 10.8 in case that was the problem)

  Once on the mac mini - using the 3.5 SDK for mac Air to build the .app using ADT

  / Users/macmini2/Documents/AdobeAIRSDK/bin/adt - package - keystore MM2.p12 - storepass PASSWORD - pkcs12-bundle stores target "... / release/Megaplex2.app"Main - app.xml Main.swf AppIconsForPublish data.

  When I run the file final app on the mac mini, it works without any problem. (OSX 10.7 and 10.8)
  I also tested this app on a macbook pro with no problems (OSX 10.7)

  The results of problem when we send the app to our distribution partner. They report that the application fails to start:

  On my Mac Mini (10.6), it never seems to. On two of the iMacs from our Mac Tester, the application icon appears in the dock momentarily, before closing then (no window appeared).

  So far, the only clue to this is a log of the console where it out this:

  08/11/12 com.apple.launchd.peruser.243932923 [132 5:12:00.800 PM]: ([0 x 0-0x3f33f3]. Megaplex2 [3114]) came out with the code: 4

  08/11/12 com.apple.launchd.peruser.243932923 [132 5:12:04.907 PM]: ([0 x 0-0x3f43f4]. Megaplex2 [3118]) came out with the code: 4

  08/11/12 com.apple.launchd.peruser.243932923 [132 5:12:06.240 PM]: ([0 x 0-0x3f53f5]. Megaplex2 [3120]) came out with the code: 4

  08/11/12 com.apple.launchd.peruser.243932923 [132 5:12:35.596 PM]: ([0 x 0-0x3f83f8]. Megaplex2 [3127]) came out with the code: 4

  08/11/12 com.apple.launchd.peruser.243932923 [132 5:12:37.040 PM]: ([0 x 0-0x3f93f9]. Megaplex2 [3130]) came out with the code: 4

  
  I installed the runtime air on Air 3.5 build computer and it made no difference.

  Someone has an idea of what could be the cause?

  OK, looks like we found the problem.

  When I was zipping the app to send them, I was the Zipper on the PC.
  Turn, it is the cause.

  If I zip on the mac using its "compress" function and send the zip, it seems to work ok.

  /me shakes his head.

• Hi, I have the latest version of lightroom. It works fine until last night when I tried to import some files in lightroom. It will come out with a message "could not copy a file at the location requested. (113)

  Hi could someone help me with this problem.

  I tried to import pictures to destination Macintosh HD or my external hard drive but it continue to go out with the same message "could not copy a file at the location requested. (114) items 1-100: articles 101-114.

  Interestingly, it was working fine up until yesterday.

  I tried restarting computer, I have the latest version of lightroom, I use Mac Os x Yosemite 10.10.4

  Thank you very much

  Hi josepht,.

  Looks like your destination folder does not have a full read and write permissions.

  Try to set the destination as a specific folder that contains all the permissions on your local or external drive, then, check.

  Kind regards

  Claes

• I can't put one of my photos as a background. It comes up with 'The file that c:\users\daniel\appdata\roaming\microsoft\windows Photo Gallery\Windows Photo Gallery wallpaper.jpg could not be written. Please help me.

  Hi, I have problems on developing an image as a wallpaper on my laptop.

  It comes up with 'The file that c:\users\daniel\appdata\roaming\microsoft\windows Photo Gallery\Windows Photo Gallery wallpaper.jpg could not be written.

  I tried right click and do it the long way to go to appearance and personalization in the control panel in the start menu. None of these work and I wonder why it's happening.

  my computer is Windows vista Home premium and is about half a year. If anyone knows how to solve the problem of it not allow me to set a background please give me suggestions.

  Dan

  Treat it as a corrupted user file.  To fix this usehttp://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  Use the new administrator account to do this.  Follow the directions given and everything will be fine and your new admin account should work normally.  Once you have ccnfired you can access, to all your acccess all of your programs and files, you can delete the old user obsolete and corrupt.

  That's all there is to it.  Now that we know, this is the profile and not the system, the solution has been set for us.

  I hope this helps. Feel free to post back with any questions as you go along.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Out with the old WinXP box in with Win 7 - recognition problems 2008 Server box

  Our box office WinXP was finally cut off (the last, all the others are Win 7).  I built a new area of Win 7/64 with Windows 7 Professional.  I was able to transfer all the old stuff from WinXP on the server by using the parameters of conduct transfer agent.

  I plugged the new Win 7 box and everything works fine.  However, I can't get our Win 2008 Server to recognize the new box.  User dave is there but the server does not see the new box.

  Q: should I remove user "dave", and then reinstall a new "dave" at the server level?  Seems that I would lose settings, etc. like this.

  I've been going through Hester and Henley on Admin book, but nothing comes out with me.

  If you have configured Active Directory, then you should be able to join your domain from the Windows 7 machine as you would for Windows XP. Please note that you may experience problems if your Local network connection is firewall, as well as temporarily disable and try again.

  http://www.notebooks.com/2009/11/11/quick-look-Windows-7-in-the-workplace-joining-a-domain/

• Unable to zoom in or out with the trackpad on macbookpro 17 "

  Firefox 4.0 unable to zoom in or out with the trackpad on macbookpro 17 "

  Some actions have been removed in Firefox 4.

  You can restore the zoom feature by changing the related values of downtown on the topic: config page.

  browser.gesture.pinch.in cmd_fullZoomReduce
  browser.gesture.pinch.in.shift cmd_fullZoomReset
  browser.gesture.pinch.out cmd_fullZoomEnlarge
  browser.gesture.pinch.out.shift cmd_fullZoomReset
  

  • http://KB.mozillazine.org/about%3Aconfig

• How to change the settings of the BT COM port with the Toshiba BT stack?

  I have a Tecra S11 with Windows7 64 bit and I need to connect via Bluetooth to a remote the BT series device. I want to use the BT interface on board.

  The BT remote appliance 38400,8, N-2 (stop to the most common place 1 2 bits). Problem: I find nowhere to change local BT Com port settings.

  The physical port HW parameters can be changed. See:
  HW COM1 with the port settings: http://i42.tinypic.com/epg5qr.jpg

  But I don't get the same tab for the port of BT:
  BT COM40 without port settings: http://i40.tinypic.com/24mcduw.jpg

  Not even the BACK order 'mode' allows me to modify the ports of BT

  Curiously, if I have the COM40 to a virtual machine on the same S11-tunnel (virtualbox), the machine virtual XP * can * change settings and communicate correctly with the remote device. How is that?

  Can _How Yes, I change the port COM BT with the Toshiba BT stack settings? _ my version is 8.00.12 (T), which should be the most recent available. I also updated the BIOS.

  Thank you
  Paolo

  Additional details.

  I tried to run the application as Administrator: still does not work.

  I crossed Win registry with regedit and gave all permissions to all users: still does not work.

  With the registry editor, I forced the port in 38400,8, N, 2 in 'HKEY_LOCAL_MACHINE NT\CurrentVersion\Ports': still does not work.

  Note that not only the application target complains, but also does not work the PuTTY used as a terminal series.

  The Toshiba BT application see the remote device were undetermined, serial port, Dev.B. No provider.

  I'm lost and stuck. Advice greatly appreciated.
  Paolo

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• I have the iphone 6, since yesterday it does not open a lot of apps, they look just as they open you and then it comes out of the application itself, and I need information in my apps so I can just remove them and reinstall

  I have the iphone 6, since yesterday it does not open a lot of apps, they look just as they open you and then it comes out of the application itself, and I need information in my apps so I can just remove them and reinstall

  Have what troubleshooting you done?  Surely you have tried something before posting here, Yes?

  Hold power and home until is buttons restarts.

• I already bought the movie HD, 'V for Vendetta', before it came with "iTunes Extras" but my purchased copy does not come with the Extras. Is there a way to fix this without having to buy the movie again?

  I already bought the movie HD, 'V for Vendetta', before it came with "iTunes Extras" but my purchased copy does not come with the Extras. Is there a way to fix this without having to buy the movie again?

  I was told that movies in the iTunes Store can be changed to include "iTunes Extras" if originally it did not come with extras. But there is a catch you get just the extras if you buy just the issue for the first time. If you have already purchased it, your version may not have the extras. This means that if you want the extras, buy the movie again.

  If you now get the Extras will depend on what the movie studio did for example if they have updated the version you have purchased, or replaced by a new version (which will be treated as a separate purchase): buy and play movies with iTunes Extras - Apple Support

• When I print, the printer sounds like its printing but nothing comes out on the page. What should do?

  I just installed an hp F4480 printer, my roommate gave me.  My OS is Windows XP.  When I try and print or copy something the printer looks like it's printing and the paper passes by like it is printing but nothing comes out on the page.  Perhaps is out of ink, I guess, but I don't know how to say and I don't want to spend $50 to get a new non-refundable ink cartridge to see.  I did a print test page and the only thing that came out was a light that said the Page of Test printer Windows XP Blue cap but nothing else was on the page.

  It's really a problem of HP, not a Windows problem, and you should look for the HP Support help site.

  However...

  One of the lights on the printer are flashing?  There are 2 'estimated ink level lights' on the front panel.  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01673672&tmp_track_link=ot_faqs/top_issues/en_us/c01673672/loc:3 & cc = us & dlc = en & lang = en & lc = en & product = 3742086

  Genuine HP ink cartridges are installed?  The cartridges have been completed?  How long did it that the printer is correctly printed?

  When you installed the printer, you have installed the "HP Toolbox" application (or you simply download and install the basic printer driver)?  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=3742086#N44

• Try to install the downloaded drivers when comes up with the error "file not found".

  Downloaded the drivers Vista for the HP Photosmart premium C410b and installation of hen comes up with the following error message: file not found

  C:/program files/hp C1164EDO-EF08-4B0B-8085-3BDSEAAEFD8D} \gup\at. Any ideas?

  Hi daddums1958,

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-84595-1&CC=US&DLC=en&LC=en&os=2093&Product=4186830&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-84595-1&CC=US&DLC=en&LC=en&os=2093&Product=4186830&sw_lang=

  10. run the download to reinstall the printer