Major issues with buttons

Similar Questions

• Major issues with Satellite S70 - t wireless has

  Hello

  I received a Satellite - S70t 31/10 and then had some problems wireless. From the start up my computer and began its activities on the internet, I suddenly noticed the sudden slow but also many problems such as the loss of packets and ping (which I had never experienced before) high.

  After some tests, I came to the conclusion that it is either something wrong with the wireless adapter, or on the other hand is not compatible with my router. I had questions everytime I open the laptop and connect to the internet, where my reasoning.

  I've updated the drivers for the wireless adapter, but it did not help.
  I am running a router Netcomm NB9wmaxxn.

  I hope that it will be able to be resolved quickly.
  Thank you.

  In my opinion you issue needs further investigation.
  It isn't quite clear, if the Wlan problem is related to the network card wireless Wlan driver, Wlan router or maybe the combination of the Wlan router and module Wlan.

  In my opinion, you should check if the same thing happens to connect the phone to another access point.
  You should check the laptop with or without the power adapter connected.
  Energy savings can affect the performance of Wlan.

  You should check if the problem could be related to the intensity of the signal.
  You should test the connection network wifi secure Wla also open Wifi (unsecured).

  Check also different standards of WLan 802.11 A B G N
  Of course, this test depends on the Wlan module. In the case of the wifi card does not support the 802. 11A, you will not be able to verify this.

• Major issues with plugincontainer.exe gel firefox 34 CPU high usage

  Plugincontainer.exe is ruining my experience with firefox by endlessly to freeze due to the high utilization of the processor. Please provide a work around or another solution. Thank you.

  Thanks for posting back. Looks like it's pages using the plugin container are the important source of the processor.

  It is possible to disable hardware acceleration of Flash to see if there are improvements:

  • Flash Plugin - maintain and troubleshoot

  Please tell us if it helped!

• Major issues with El Captain upgrade on MacBook Pro

  Hello

  Since I have improved my Macbook pro 15 "mid-2010 for the El Captain I have major problems.

  -Until ' to and more than 5 minutes to start

  -Slow to open all apps

  -The machine restart without reason

  -Continuous gel (I feel like I'm on a PC running Windows 95!)

  How can I solve the problem? Downgrade pOssible?

  Thanks in advance for your support!

  To go back:

  OS X El Capitan: revert to a previous version of OS X

  Yu can also

  Run this and see the results here, so we know more info about your Setup and we help to El Capitan working

  EtreCheck

• Major issues with Media Player for XP SP3

  Since my hard drive crashed and I got one installed, my Media Player keeps giving error messages, will not play one thing and destroyed the tracks I can't fix it even with the Fix It guy. Same problem is showing errors in the installation. What can I do? I got mp11 when this happened. I uninstalled and restored to mp9 (which I prefer). Still no go. What is the problem? How this damage? How can I solve this problem? I'll have to go back and erase my entire hard drive with re - install Windows or what? Old, old computer install CD. big step backwards. A lot of time for the updates to reinstall. Someone tell me please another way. I tried to implement everything. Or I? HELP PLEASE!

  Hello

  1. what error messages are you getting?
  2 did you have to re install the operating system after the new hard drive?
  3 have. what FixIt you tried?

  Please try the following methods and tell us if it helps.

  Method 1: Please try the following troubleshooting utility.
  How to troubleshoot playback in Windows Media Player 9:
  http://support.Microsoft.com/kb/811982

  Method 2: Please boot your system to the boot and see if the problem still occurs in this mode. Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Method 3: Run the System File Checker and check if the problem still persists. To do this, please click on the link below:
  http://support.Microsoft.com/kb/310747
  If you are prompted to insert the disc to scan sfc, please visit the link below:
  http://support.Microsoft.com/kb/900910

• I have major issues with captioning

  I can't bring in the files of the CSC. I'm working on a mac using 6 and cc and it is crazy.

  Try this:

  With the help of BODY CS 6.0

  1 make sure that in the program monitor, under the options menu-flag for the program monitor (right upper icon), "Closed Caption Display" is enabled and set to everything that is on your CSC - my CSC is CC1

  2. Select the sequence you want subtitles to appear in and under the "Sequence" menu in the main task bar, go to "Closed captioning" and join the CSC file

  You should now see captions when you rub in the sequence

  Good luck!

  CM

• Major problem with button in apex

  Hi all
  
  
  I have uplaoded dhtmlxcombo.js files in apex under static files.
  Now I created buttons in my report. whne I'm clicking this button I am geeting this error as "the Web page is not found.
  
  But when I tried to remove the js file, this button it works very well. can any body help me to reolve this problem.
  
  Thank you
  David...

  Could you give us more details (apex html version, etc.) or provide a demo of APEX ORACLE workspace?

• APEX dynamic Action issue with custom button template

  A new day and a new problem. -.-

  I wanted to create a dynamic action, if a button is clicked and got the error "the selected button uses a 'button model' which does not contain the #BUTTON_ID substitution string #. So I googled a bit und found issue with action Dynamics apex. I thought that this would solve my problem and I looked in the model button to find this:

  <table class="t15Button" cellspacing="0" cellpadding="0" border="0"  summary=""><tr>
  <td class="t15L"><img src="#IMAGE_PREFIX#themes/theme_15/button-l.gif" alt="" /></td>
  <td class="t15C"><a href="#LINK#">#LABEL#</a></td>
  <td class="t15R"><img src="#IMAGE_PREFIX#themes/theme_15/button-r.gif" alt="" /></td>
  </tr></table>
  

  A former colleague created the model itself and I do not know where to insert the #BUTTON_ID #. Does anyone have any suggestions?

  Concerning

  Chris

  Miss you atrribute button ID,

  is the correct code

  
  
  #LABEL#
  
  
  

  I hope this works.

  Go

• iPhone 6 more issues of button "home" and turn off the questions

  I have two separate issues with my iPhone 6 more

  9.3.2 software (updated to try to solve this problem - question began before the software upgrade)

  My iPhone only more 6 works randomly.  I'm still able to make calls and use the phone, but the phone is constantly interrupted by these two questions.

  "Slide to turn off" or button 'Cancel' at the bottom

  (1) the phone asks me to "Slide to Power Off" - at the top of the button slide phone - with a cancel downstairs.  Slide and turn it back on does NOT resolve this problem.

  "Home" button is to take a screenshot of my current screen randomly.

  (2) when you press the button of my house, he takes a picture of my current screen instead of Act works as a home screen button.  This can happen 1 time or 10 times in a row before the home button functions correctly.

  Here is a screenshot of the camera to illustrate various photos taken.

  

  I did all the updates

  I did tap hard downs

  I backed up my phone and tried to reset to factory settings

  These are the questions randomly but are very common - a question of these two issues with caused during the use of the phone to navigate or "Slide to power off" appears randomly if the phone is not in use.

  Please help with any suggestions!

  Your sleep/wake button is pressed somehow. You have a form any case suitable for your phone that covers this button? If not, the sensor that presses the Sleep/Wake button against is missed ignition. As you even tried a factory restore, it may be clear that the problem occurs because of a case that is pressing the button somehow or the switch has gone bad.

• I am having major problems with my emails. I can send emails OK but I can't receive them. I use Outlook Express.

  I am having major problems with my emails.  I can send emails OK but I can't receive them.  I use Outlook Express.  When I first turn on outlook express, emails start coming, but then outlook express crashes.  I disable outlook express and start again. My emails are stuck in the Orange webmail box until the last email is downloaded.  This means that I sometimes get the same time to send four or five. I called technical support Orange several times, but they say it's a problem of microsoft. I use Windows XP.

  original title: I can't receive emails from outlook express.

  Hi Mike,.

  Make sure that you have not activated your antivirus software analysis of electronic mail.  See www.oehelp.com/OETips.aspx#3 which is often a problem with receiving and sending a message.

  Then, try to go to file | Identities and setup a new identity.  This will give you a new message store and a new registry hive (where all the settings and account info is).  Add your email account and see if it works very well.  If it sticks sometimes, make sure that you are not setting to check messages too often (like every 3 minutes or somesuch).  You can also try to increase the timeout for the server where this is a problem (Tools |) Accounts | Mail | Properties | Advanced).  See if who deals with issues "" OE gel.  If Yes, then you can use the file | Import | Messages to bring them from the old identity.

  I do not know that moving to Outlook might solve the problem, because they both use the same mechanism to retrieve messages.  If you still have problems, come on and generate a log file and when OE freezes, which could give some indication of what is the underlying problem.  Make sure that you disable the log file later, because this file grows enormously and can cause problems if it becomes too large.

  Steve

• BlackBerry Q10 Major problem with update (10.1.0.4181)

  I tried to do the update last night (10.1.0.4181). Once completed the update let me know that I had to restart my phone (standard) that I did.

  However, the reboot happened--got stuck on 100% loading screen (sitting for about 25 minutes). Do you have a battery pull and I tried again and this time it loaded and said my update was installed successfully - but when loading, there was clearly a major issue. The hub does not (just a black screen). When I try to open anything it opens--the box appears to say THAT BBM then everything stops, and then the entire phone will be closed and reboot.

  Even if I try to leave (not load anything) it keeps restarting itself. The longest I have had on is about 2 minutes.

  The update is not complete. It still shows my most recent software like being10.1.0.238. If I try to resinstall the update it just freezes at 0% and stops after 2 minutes.

  I tried to do a security wipe but it did not work so far - sitson the screen saying an erasure of security is ongoing, then just the boots down and when it restarts all my apps are still there (even if you can not open anything).

  I also tried to plug it into my computer and try to do a factory reset on BB link, but because the phone keeps himself restart the computer continues to lose the ability to communicate. In the middle of the attempt to reset it will come with a message saying that the computer can no longer communicate with the phone (usually right at the time, it is set to zero). I tried already to many battery grips and it recharges, and nothing has helped.

  I'm running a Q10 SQN100-3. My version of the software appears as 10.1.0.238, and I had no problem with my phone until I did the update last night for 10.1.0.4181. Any suggestion at this point would be helpful I thought I want to solve my problem with a factory reset, but with this problem of communication arise each time it resets which seems to not even be an option.

  Update:

  After a few tries, I finally got a security wipe, which resolved nothing. The phone is then in a never-ending cycle of starting with the introduction of screens.

  I finally downloaded autoloader and used that to wipe the OS and reinstall. Worked like a charm and the phone now works correctly.

• Premiere Pro CC 2015 ripple Edit Major Lag with 3rd-party Audio effects

  Greetings,

  I upgraded to CC 2015 from 2014 CC yesterday. Opens the project I had worked on to discover that when I realize a montage by waving there is a gap of 7 to 10 seconds before I can resume playback. When I edit by ripple the program monitor past from the view of the only program to place 2 view that shows you the exit point of the previous element and point to the next clip. At least that is what I think it does. It is difficult to say because as soon as I ripple the program monitor hangs for several seconds.

  It seems that it is a problem with the audio effects part that I loaded in the Audio Mixer of the track. I use a Native Instruments compressor and limiter vladg/sound. I use some effects audio stocks like left fill with law, right to complete with the left, equalizer and multiband compressor. I think I saw somewhere else on these forums that there are other issues associated with the allowed effects of iZotope in first. If I create a new sequence in the same project without audio effects, ripple edit works very well. This is a major issue because I have been using these audio effects in the Panel mixer Audio track for many months.

  I have no problems with these 3rd party in 2014 CC Prem audio effects.

  This is a recording of the program screen. https://Vimeo.com/131549297

  Here are my system specs:

  First Pro CC 2015

  Win 7 64 bit (up to date)

  I7 970

  24 GB Ram

  NVIDIA 970GTX (driver)

  500 GB SSD

  Internal 2 TB

  2 x internal 4TB

  3 TB internal

  12 to RAID 5 via USB 3.0

  USB 2.0 and 3.0 readers

  Audio device FireWire (M-AUDIO FireWire1814)... even if I'm not using it for reading. It is connected.

  Images East of C100 H.264. MTS, JPEG. MOV EI, JPG still images, simple titles in Premiere Pro and color mattes.

  Multiband compressor is certainly a problem with PP 2015 and trimming.  Try to delete this one and see how it goes.  Report results.

• Should have issue with PE8 airbags!

  PE7 was (at least for me) usable and stable.  He did what I wanted, and I don't remember the problems of stability.  That all ending with an 'upgrade' to PE8.  I can't seem to make it work for 2-5 minutes before it crashes.  It happens at different times and in various activities... just look at the screen.

  I have a good video card NVIDIA (which very well seems to work with all the other products that I have), but I read the 'solution' pinned at the top of this forum, updated to version "beta" of the driver who is supposed to fix the random crash... However, my 195,81 verified drivers have had zero impact on the uniform PE8 crashing.  I was not able to complete a single project, as I've "improved" version 7.  My system is vista 32 bit with 4 GB of physical ram and a stocky core2quad processor.  It runs CAD, flight sims and other audio applications and video two well and probably... but not PE8.  The only other app with what he has had problems is PSE8... but the minor issues with PSE8 pale in comparison with the total absence of ergonomics in PE8.

  I see so many similar reviews and comments from the forum... I wish, oh how I wish I had waited for a decision on the upgrade!

  So the question is: given this release has been horrible, there will be a free and fixed version 8?  .. .or will be Adobe attempt to make his customers wait (and pay) version 9?  I can say that if they think that this is the case, Adobe loses me as a client PSE & PE... and all hope it will be for the review of their substitutes like Lightroom, Photoshop or Premiere (non-elements).  They can be produced purposes... but if the prospect of the company is such with the entry-level products, it won't take long for a company to feel too big for her panties with the highest range as well.

  Has no QA whatever happen with PSE8 or PE8?

  I can also use ffdshow, but I turned off this one due to the poor performance in the Organizer.

  I don't know how if button PrE, but FFDShow asked all sorts of headaches to the PrPro. A few users have been able to do anything when it was installed. To return to the PrPro 1.0 release (first 7), Adobe changed the engine to display live Show. I don't know at what time in pre development even could happen - don't know my history of pre, as I know PrPro.

  For users of PrPro, the complete withdrawal of FFDShow got things back to normal. It seems a little difficult to get rid of, however.

  As to why your PrE earlier will work fine with the same images, but PrE 8 is having issues, I can't help, as I don't know what's under the hood with 8 PrE. Perhaps a new feature that Smurf things with the MS MJPEG CODEC, or maybe the conflict is elsewhere.

  I think that the Mogran, at least, has a trial, but he had the MainConcept MJPEG for so long, I forget now.

  I would look at disabling FFDShow, as a test. Make a System Restore Point before the withdrawal, in the case that has zero to do with anything whatsoever, and you want to roll back to have. Then remove and test. I would also like to do a System Restore Point it too, just in case.

  Good luck

  Hunt

• Huawei P9 - I have many issues with getting my pictures from the phone to my Imac

  Huawei P9 - I have many issues with getting my pictures from the phone to iphoto on my Mac.

  Before the summer I bought a Huawei P9 phone, I can easily see the photos on the phone - I can't just them on my mac.  When I connect via a USB cable, it refuses my permissions.

  I try to use my Google account to view on the Mac and move the iPhoto - I can't work either! I can see them, I can't move them!

  I'm pulling my hair out and I have enough to do with! Help, please...

  Jim Hosking

  You need the phone provider support - there is a problem with the way their phone works and how to use it and has nothing to do with the Photos or iPhoto - if pictures is consistent with standards of good Photos and iPhoto won't work with it

  You may need special third party software for your phone load in Photos or iPhoto

  LN

• iPhone 5 volume cannot be reduced with (-) button after update to 9.3.2

  Volume cannot be reduced with button after update to 9.3.2

  Can increase the volume with button until the max volume.

  Cannot lower volume in any application that has sound.

  This on the iPhone 5 with iOS 9.3.2

  Try a Reset: press and hold the sleep/wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears. -Note: no data will be lost