Make a break all the slides on the last image

Similar Questions

• Update 25.0.1 (Mac) a total disaster. Break all THE CSS on each site. Have WTF you done? You MUST have links go down, if not, hasta the vista.

  Update 25.0.1 (Mac) a total disaster. Break all THE CSS on each site. Have WTF you done? You MUST have links go down, if not, effyou, hasta the vista.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• How to display all the other images in the image indicator

  Hi all

  I use IMAQ for capture and record high freq and images high resolution. I have an indicator of image directly from 'Image Grab acquire'. Thus, the indicator image displays images at very high frequency too. To display frames, but not necessarily all alone (enough so that the operator can see what's happening). So, I wonder how I can view, say all the other images (for example all the odd/even number of images), or jump on two and show the third?

  Any help will be appreciated!

  Thank you!

  Wenlong

  Here are some general observations.

  • Image acquisition is "a horse of a different color" - in contrast to many other I/o devices, the memory containing the data (here called the "buffer") is handled by the driver and is not directly available for LabVIEW.
  • I'm guessing that you are using hardware OR video, because you use the IMAQ functions (I used only IMAQdx).  Is this true?  What camera do you use?
  • The (probably) "Awakenings" IMAQ extraction buffer herself to the camera (I say 'probably' because I don't know the hardware you use).  This means that While the loop containing it will work at the rate of the camera images (so you can easily calculate the frame rate, as your example code).

  This looks like a routine NI Demo, so I think that you don't have much experience with the treatment of Vision.  If you have a lot of other LabVIEW experience, you should be able to make the leap to the vision, once you have the idea of the functioning of the buffers.  Unfortunately, there isn't much in the way of tutorials and white papers on Vision than on other subjects of LabVIEW.

  Yes to your question - how to view every Nth frame.  This is the loop key (which arises directly from your code):

  

  As menioned above, this routine is 'clocked' by the function of extraction buffer.  What you do to display each image is th is to place control of the Image inside something like a Case statement that "triggers" each nth time.

  Here is a version of 'Nth' of the loop above (details omitted)-

  

  We always roll the filling of each buffer with a frame loop.  But we then use the whole function divide to select the nth image (those who have a remainder of 0 when i is divided by n-th) and of the 'image' line (it does not really an image) for 'Image' control, with the other case being "Default" (for all the other Valentine go) and nothing inside.  Thus each nth time in this loop, the output of the extraction buffer is the wire to an Image (and displayed), the other N-1 times the thread is going nowhere.

  Bob Schor

• problem with list and point make showing is not the last element

  Hey all the...

  I have a strange problem with a spark list and item converter.  All I want to do is display images. However, the last image is not rendered. The code is very simplistic. The HGROUP restores only the first two pictures. However, if I add a < s:lable > tag to the HGROUP after image, all three of the images that I expect to make it appear.  Someone knows why?

  Thanks in advance!

  <? XML version = "1.0" encoding = "utf-8"? >
  "" < s:ItemRenderer xmlns:fx = "http://ns.adobe.com/mxml/2009"
  xmlns:s = "library://ns.adobe.com/flex/spark".
  xmlns:MX = "library://ns.adobe.com/flex/mx".
  autoDrawBackground = "true" >

  < fx:Script >
  <! [CDATA]
  Import valueObjects.ManufacturerIconBE;
  
  [Bindable] private var comp: ManufacturerIconBE;
  
  override public function set data (value: Object): void
  {
  model = value as ManufacturerIconBE;
  }
  []] >
  < / fx:Script >

  < s:HGroup >
  < s:Image source = "{comp.imagePath}" / > "
  < / s:HGroup >

  < / s:ItemRenderer >

  Use preliminaryWidth and preliminaryHeight to book some dimensions of the Image.

• How to format individual images in Dreamweaver CC without affecting all the other images used?

  Whenever I have format a picture, the change affects all the other images on the site. Is there a way to format a single image?

  Give it a unique ID (1 x per page) or the name of the reusable class in your CSS.  XXX corresponds to the value in pixels.

  CSS:

  ID

  IMG #ID {width: xxxpx}

  name of the reusable class

  IMG. className {width: xxxpx}

  HTML:

  

  or

  

  Nancy O.

• a table of images only the last image shows the index

  Hello world

  I try to index a table of images and all, but the last item gives me the error: "not an image."

  Here is a picture of the vi. The first loop load images and stores them in an indexed auto tunnel. Each diagnosis that I fell on this loop showed that all is well. The second loop must display the image stored in the tunnel sequence indexed auto, but it does not work. Instead, I got the error message that the 0 to n - 1 elements are not images, and only the last image is displayed.

  

  What I am doing wrong?

  Thanks for your help.

  and vi:

  Hello

  This VI has worked well for me with a contribution of 5 bmp files. You can check your input files?

• Load swf to the last image

  Hello

  I have several files SWF is meant to be read in order (like a book). I can load the previous swf file, but I need to go to the last image. Is this possible with the code that I have?

  lastPage2.addEventListener (MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_1);

  Import fl.display.ProLoader;

  var fl_ProLoader_1: ProLoader;

  var fl_ToLoad_1:Boolean = true;

  function fl_ClickToLoadUnloadSWF_1(event:MouseEvent):void

  {

  If (fl_ToLoad_1)

  {

  fl_ProLoader_1 = new ProLoader();

  fl_ProLoader_1.load (new URLRequest ("CEAS_I_1_16.swf"));

  addChild (fl_ProLoader_1);

  }

  on the other

  {

  fl_ProLoader_1.Unload ();

  removeChild (fl_ProLoader_1);

  fl_ProLoader_1 = null;

  }

  fl_ToLoad_3 =! fl_ToLoad_1;

  }

  It doesn't work at all, but I could find another code that you suggested on another thread: go to a specific external swf image

  It worked!

  var loadmod2:Loader;

  lastSection.addEventListener (MouseEvent.CLICK, loadlast);

  function loadlast(e:MouseEvent):void

  {

  {if(!loadmod2)}

  loadmod2 = new Loader();

  loadmod2.contentLoaderInfo.addEventListener (Event.Complete, loadCompleteF);

  }

  loadmod2. Load (new URLRequest ("CEAS_I_1_16.swf"));

  }

  function loadCompleteF(e:Event):void {}

  addChild (loadmod2);

  MovieClip (loadmod2.content), .gotoAndPlay (33);

  }

• Why the last image of the exported image sequence is sometimes black?

  I get sequences of images in Photoshop and then exporting them to a file mp4 video.  For some reason, Photoshop sometimes decides to put a black frame at the end of the video, no matter what I try settings.  Sometimes it leaves aside the black frame.  I can't understand why he did this.  If anyone knows how to get rid of this?  When I import the resulting sequences first, I need to change all the frames of black.  Not impossible to deal with, but it is kind of a pain.

  Adobe Photoshop Version: 2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532 x 64

  Operating system: Windows 7 64-bit

  Version: 6.1 Service Pack 1

  System architecture: AMD CPU Family: 15, model: 10, Stepping: 0 with MMX, entire SSE, SSE, SSE2, SSE3 FP

  Physical processor count: 6

  Processor speed: 3200 MHz

  Built-in memory: 8191 MB

  Free memory: 4507 MB

  Memory available to Photoshop: 7154 MB

  Memory used by Photoshop: 70%

  Graphics card: NVIDIA GeForce GTX 470 (with the latest driver Version 347.88)

  Adobe Bridge 6.1.0.116 x 64

  Use, file-> open and checking the box 'Sequence of Image', I am loading a sequence of JPGs I've cropped in Photoshop (using a script to automate this process), and I specify 23.976 fps. I checked all the JPG files, and they are OK. I play the animation in Photoshop, and it looks good.  I then export the movie using the file-> export-> made video, I use Adobe Media Encoder, h.264 format, high quality, 1920 x 1080 (the original document size), 23.976 fps.  It automatically selects the zone selection to export work.  That seems correct.  In a sequence of images of N, it is said that it will export images 0 to N-1, which I think is OK if it indexes starting at 0 and not 1.  I tried to export (frames) checked, and the result is the same.  The last image is black.  I also tried to change the work area to remove the last image and the last frame of the rendered video is so dark, but the last image of the sequence, I opened is missing.  I checked the image sequence that was exported with the area of complete work (or frameworks) selected and all managers are there - with just a framework black, added at the end, which is certainly not in the work area.

  No error message.

  I checked the help, also I tried searching the forums, but I don't know what I'm doing wrong.

  The problem has been around on and off for a few years.  He had disappeared with CC, but now he's back, even though I'm not aware of what I'm doing differently.

• AutoPlay and if stop at the last image does not not on android Tablet

  I'm trying to use folio Builder to make a portfolio for my work and post it on my Nexus 7 Andorid tablet.  The opening page is a video that should stop on the last image.  After reading many articles, it seems that only iOS is able to use these features, and it won't work on android.  Are there workarounds?

  In early February, we will have our new native Viewer available in large pre-release Android, and you will be able to compile a version using this new application that supports the stop on the last image. Until then, no, there is no work around.

  Neil

• VIDEO WITHOUT STOPPING ON THE LAST IMAGE

  Help!  I ticked the box in Folio Builder v26 - "stop on the last image" - but when I saw in Adobe Content Viewer, after playing the video, it is up to the poster frame - which is the first image of my video.  This won't work for what I'm doing at all.

  Can anyone help?

  Thank you!

  Kathie

  When you are previewing are previewing on your desktop or on an iPad?  Stop at the last frame is available through iOS so it does not work on your desk.  But if you have your iPad plugged in to your computer and open it from the ACV on your iPad then you should be able to preview on the device and it should work.  But as I said, this will work only on iOS.

• Stabilizing warp CS6 scales down to the last image

  Hey,.

  Whenever I have add the Warp in Premiere Pro CS6 stabilizer, it auto-echelles of sequences, with the exception of the last image. It changes just to 100% once again, so I'll have to cut. Others affected by this problem, or of the ways to solve it?

  Thanks in advance.

  Edit: turns out it's probably not the stabilizer of the chain, but the position. When I set the position, the same thing happens, and as the stabilizer changes the position, the position will probably cause the problem. Key frames is disabled.

  Come discover something new, which makes it even more strange.

  The last shot of the clip using the effects on the other. I have classified the next clip completely red, just to check. And the last frame of the previous clip flushed as well. In addition, when a clip is not stabilized, it will say: 'click Anylize', with the exception of the last image.

  It seems to me that, instead of problems with the last image, it is probably the first frame of the next clip which is missing. So what is happening: the previous clip using the effects applied to the next item. I never came across something like this.

  Edit

  RESOLVED:

  Somehow, on each unique clip, the creation of keyframes for opacity is enabled. But there is no keyframes, and it is always 100%. When I change the value and go up 100%, the missing frame returns.

• If you create an animation you can loop the last images of this animation if a key is held down?

  OK let's create you a button which, when he is pressed to play an animation of 20 frames realsed if he goes to the framework one and stops when he plays on this animation. in the section allows you to have an animation of fire and you want the home to apear and unless the user sound to the bottom of the animation has reached the end of the time line and loops back and he played the last 5 frames of animation, and once it is loose, it will to and stops at the framework one. Well, I know how to make a button that pressed once play an animation. And I know how to say what is released to and stops to frame a. What I do not know how to do is a loop of the fire on the last images of 5 or 6 so that the user can hold down throughout the day and unfold this animation. Thank you for any wait you may have.

  Just put an order in the last frame to gotoAndPlay (#), where # is some number of frame is 5 or 6 frames at the end

• Game stop on the last image appears lighter than the last image

  I have a video game to "stop on the last image" by using the technique described here:

  OAR-here http://digitalpublishing.tumblr.com/post/6141054971/How-to-Make-a-Video-stop-at-the-Last-f

  Works very well. But whenever I do that, there is a slight darkening when the multi-state object appears at the end. To create the image of the multi-state objects, I opened the video in Photoshop, caught the last image and saved as a JPEG file.

  Anyone have any ideas? I tried to save the image as a PNG, much other workaround solutions, but the problem persists. I've noticed this in other publications that I downloaded also, so I think that the problem is widespread.

  I found an answer to this problem. I wrote the answer in a post to blog here:

  http://blog.gilbertconsulting.com/2011/09/DPS-stop-video-at-last-frame.html

• How to end the movie with the last image?

  Hi all

  Can someone tell me how I can get the last image to congeal, so

  that the video does not go to black?

  Thank you

  Shaul

  If you expand the end of the timeline and move the end of the rear bar of a frame work area, and then export the work area, you should finish on a Blackboard rather empty first frame.

• Camera: Find the last image?

  Hello

  Are there examples of how to find the last image taken after invoking the camera?

  Thank you

  Hi and welcome to the forums!

  If you take the picture and save, and can't find it? Or you take pictures

  Return to the back and you want to know where they are stored as you pull?

  Go to the media and click the photos, as soon as the images are displayed

  Highlight it, click menu, properties. It will show you, device, media and file

  and size.

  You can set the previous directory. Unit > menu button > options.

  Here you can set options for the camera with flash, color, size, and storage in the

  media folders,

  Thank you

  Bifocals