XP embedded SP2 to SP3 update

Similar Questions

• XP SP2 to SP3 update

  Should be easy - start - all programs - Windows Update error then add the update: Tools - internet opions - Security tab - Trusted Sites - Sites added microsoft (http://www.update.microsoft.com/windowsupdate/) area as you direct.  How some ever - while checking for updates, the software detects it cannot "display the requested page" and provides 3 options:

  (1) go to the FAQS - fact and works just fine, but no update to SP3

  3) go in groups of discussion - fact update works fine, but no update to SP3

  (2) SOLUTIONS - immediately error HTTP error 404-File not found

  I just spent most of the past 12 hours, reinstalling Windows (original copy) because of a defective hard drive (starting from zero).  It should be easy to update with the upgrade of the car, but apparently it isn't and I can't understand why.  Please notify.  Thank you

  Have you tried just manually download and install XP SP3 yourself? Download here.

• Update for Windows XP (KB2964358), upgrade of service SP2 to SP3?

  I went on the website and tried to download the KB2964358 update), wouldn't DOWNLOAD says I need service pack 3. Where can I go to upgrade (download) service SP2 to SP3?

  I have Windows XP Home Edition Version 5.1 Service Pack 2 Internet Explorer 6.

  Last Friday, I got a virus and did a non-destructive recovery from my system. Before that, I had IE 7, anyway to extract the files from my PC?

  Hello

  The problem with viruses on the computer, I would say that you download and run a full scan of the system using the Microsoft Safety Scanner.

  Here is the link for the Microsoft Safety Scanner which is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Note:

  Data files that are infected must be cleaned only by removing the file completely.
  which means that there is a risk of data loss.

  To download and install Windows XP SP3 see the link provided below.

  How to get Windows XP Service Pack 3 (SP3)

  Hope the helps of information provided. We know the results.

• A computer WinXP SP1 can be updated WinXP SP2 or SP3

  Windows xp service pack 1 recent recharge

  is no longer compatible with the windows update web site

  32

  dial the system

  You have a friend with a fast connection?

  If you haven't already done so, you will need to install the SP2 and SP3

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Windows XP Service Pack 2 - Download (for single PCs too)
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=049c9dbe-3b8e-4F30-8245-9e368d3cdb5a&DisplayLang=en

  Are you ready for WinXP SP2?
  http://support.Microsoft.com/default.aspx?PR=WindowsXPSP2

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

• recently updated from XP SP2 to SP3-after the insertion of a USB key, the shortcut menu does not appear

  OS - Windows XP with SP3 (recently updated from SP2 to SP3)

  After plug in a USB key... actually connect any external drive... the usual pop-up window (asking "what do you want') no longer appears.

  Y at - it a WinXP option that must be adjusted as a result of the update to SP3?

  Suggestions appreciated. Thank you - FLgal946

  11/07/2010 07:44, FLgal946 wrote:

  OS - Windows XP with SP3 (recently updated from SP2 to SP3)

  After you connect a USB... actually connect all external
  drive... the usual pop-up window (asking "what would you do") no
  longer appears.

  Y at - it a WinXP option that should be adjusted as a result of
  update to SP3?

  Suggestions appreciated. Thank you - FLgal946

  Hmmm... General, people ask how to disable these things...

  There are different ways of activation or deactivation of these things, try this
  one:

  AutoPlay Repair Wizard
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=c680a7b6-e8fa-45C4-A171-1b389cfacdad&displaylang=en

  John

• Equium A60 Win XP SP3 update problem

  Of the major problems upgrading a re-installation of SP2 to SP3. Had to re - install because of stability issues. I tried all the many solutions proposed in article Microsoft ID:822798 without success. Installation of the SP3 pack always gets the part passing through and still gives me the error dialog update SP3 "failed to install catalog files. SP2 is stable, but simply will not be upgraded. I tried a variety of approaches, including a try immediately after re-installing XP SP2 with + without any security software or loaded drivers, but same problem no matter what approach.

  I'm running the original BIOS - is an update V 1.90 likely to solve anything. I was tought not too touch BIOS upgrade, unless she has a performance advantage?

  If this isn't the case, someone has other suggestions.

  Toshiba portable computer Satellite A60
  PSA67E
  RAM 1 GB +.
  WIN XP SP2

  Thank you

  Hi mate

  How about including the SP2 and SP3 and building new Win XP disk in Win XP installation disc?

  You can use a software called nLite. It allows you to integrate the drivers and updates on win xp disk.

  After that, you can use the new disk to reinstall new OS

• SP2 and SP3 removes my system configuration file!

  This computer I'm is an entry door I think that a 2001... It has XP Professional SP1 on it... everytime I try to install the SP2 or SP3, it will restart for the installation... However if she never has to restart again I repair windows and restore it SP1... because SP2 and SP3 removes my file Config system... never heard of this and or any idea how to solve this problem?

  I've done several installs complete costs and...

  Make another & make the right way this time. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to get the SP2 or SP3 for Windows XP

  Searched everywhere and can not find SP2 or SP3 for Windows XP computer operating system - independent. Windows Update was never above listed.

  Any help for this old man would be appreciated.

  Thank you

  Frank

  Hi FARPAR69,

  Please see article with some useful information:

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Program does not work after downloading the sp2 and sp3

  After spending hours and hours trying to download sp2 and sp3, I finally got to download completely successfully. for some strange reason when I try to open programs like weather bug and msn messenger they open but close immediately. How can I fix it?

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Is it possible to get sp1, sp2 and sp3 for XP

  I know it's laid before, but where can I download updates SP1, SP2 and SP3 for XP.

  I have the original XP Pro install media.

  I am strongly considering to put XP Pro on a Dell PC I have has no HARD drive.

  I plan to do that because it's basically Win8.1 PUE!

  A HUGH mistake buying a machine with Win8.1!

  It is UGLY, it is INFLATED WITH CARP, it is UNDESIRABLE to the IMO.

  I have need a lot of talk of "insecurity" and any future update. I can't live without them.

  I can't the XP service packs of MS or where ever?

  CHANGE > in fact I found the s SP just now install media.

  I found the stub thing after that I downloaded.  But I found no later than SP1 stub.  But if the SP1 is not necessary, I can remove it.  Just read somewhere that, in order to get SP3 installed, I need SP1 AND SP2.

  No, to install sp3, you have sp1 OR sp2.

  Yes, the news of the "System requirements" on the download page of the sp3 are vague and misleading: "Windows XP Home Edition, Windows XP Professional Edition, Windows XP Service Pack 1, Windows XP Service Pack 2."

  Commas means 'or' - except the comma between the two editions and two service packs, which means 'and '.  The requirements must be written (XP Home or XP Pro) AND (XP sp1) or XP sp2.

  If you don't end up doing this, see the post following MS MVP PA bear first: https://groups.google.com/forum/#! msg/microsoft.public.windowsupdate/4-jCtXsbshs/HBI-0476Wj8J

• My windows xp home will not install IE8, SP3, updates, backup NT FixIt it or format partition. It is part of a home network.

  The computer has XP Home. It is an older machine, 266 Celeron, 2 GB of Ram that I built a few years ago. It is part of a home network. It has not been updated for a while so I decided to install SP3, updates, IE 8, BackupNT off CD, FixIT and Partition & Format 2 more large players. It wouldn't install them or partition or format the disks again.  It is clear that I have no idea.  Mike

  Hello

  What is your level of service current pack? Click right my computer, click Properties, on the general tab, he says.

  If this isn't SP1A or SP2 you will not be able to install SP3. You will first need to install SP2.

  How you try to install the SP3? Stand-alone package or Windows Update?

  I must say that I'm not sure why you are unable to install, for example, NTBackup. As said by Harish B N, we need more information about the error you get.

  Tricky

• Do I need to install SP2 before SP3? If Yes, where can I find the Microsoft of SP2 version?

  I had to re - install Windows XP SP1a, from a CD of resettlement came with my Dell laptop. This was done because I upgraded the hard drive. This facility went well. I went to the Windows Update site to try to get the SP2 and SP3. The webiste is said to SP2 until you can do SP3. The only version of SP2, I find on the website says that it is for the professionals and see the link for the Service Pack to the simple version. When I go on this link there is no one version. Do I need to install SP2 before SP3? If Yes, where can I find the Microsoft of SP2 version? In addition, the site says that automatic updates SP2 but I checked my Configuration of the automatic updates and it will not take anything in. Is there a way to force the automatic update to run immediately? Thanks, Ben

  Ben,

  I totally agree with PML, you should be able to set up IE and then go to the Windows updates from there, once you get on the Windows Update site it will scan your system and implement critical updates and optional updates SP2 and SP3 should be on the list. It's a way to force an immediate update.

  I hope this helps.

  Jim

• Is there a way I can get even SP2 and SP3 for windows xp home edition to my pc that had been in storage since 2007?

  I tried to go to windows update but redirected to micrsoft support page, which offers no SP2 and SP3 for windows XP Pro, and yet I don't have a network of computers running windows XP Pro download the SPs would be a disater as it is intended for more than one PC.

  It does not give the notice to go to the windows update page, but I can't get there because I do not have windows XP SP 3 installed on my pc, and even if I have it on a disc I couldn't install it anyway because SP 2 is not installed on this pc.

  So this pc seems to be thrown into a sort of limbo XP, does anyone know a way I can get these much needed without breaking service packs?

  The download versions below can be installed on a single computer.

  Where to download the SP3 Setup file:
  (The file is large but only installs the components required by your PC)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en

  How to obtain the latest Windows XP (support CD or download) service pack
  http://support.Microsoft.com/kb/322389

  Your computer must be at least level SP1 or SP2 SP3 will not be
  install on XP Gold.

  Steps to take before you install Windows XP Service Pack 3
  Recommend the steps to take before you install Windows XP Service Pack 3.
  Also includes troubleshooting information.
  http://support.Microsoft.com/kb/950717/en-us

  I would also create a "save image" of my front disc
  to install SP3 just in case you have problems.
  Not having any Image backup software:
  Try the 'True Image' (has a 15 day trial version available)
  http://www.Acronis.com/homecomputing/products/TrueImage/

  ===========================================================================

  Windows SP2 download (WindowsXP-KB835935-SP2 - ENU.exe)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyID=049c9dbe-3b8e-4F30-8245-9e368d3cdb5a&DisplayLang=en

  J W Stuart: http://www.pagestart.com

• Consistent degradation of privileges and functionality in Xp Sp2 to Sp3.

  My problem is I'm always losing administrative privileges, without apparent reason, on my Windows Xp Pro Sp2 to Sp3 upgrade facilities.  This occurs after the installation of updates after Sp3 installed on this version of Xp professional Sp2.  This has happened time and time again and becomes quite frustrating.

  Hi Lhun - Grub - AP Padma 'gro-' dul gyi,
   
  -Is this problem occurs after the installation of updates every time?
  -You receive an error message when this problem occur?
  -When you mentioned that you lose Admin privileges, does this mean that you are unable to work with the programs or access to certain files/folders?
   
  If you receive "Access denied" error message while trying to access any file/folder, follow the steps in the article below:
   
  "Access denied" error message when you try to open a folder
   
  After return with more information pertaining to the matter for us help to help you better.

• Windows XP need to upgrade to SP2 or SP3

  Hello

  I have Windows XP SP1.  I need to upgrade to SP2 or SP3.   There are free downloads online.  can I use them? or should I buy from you?  Please me know

  Thanks in advance

  You don't need to buy anything. If you check in Windows updates, service packs must be put at your disposal. (Unless it's an illegal copy of XP).

  If you installed SP1a, you can ignore the SP2 and go right to SP3. If SP1 is installed, to install the SP2 and SP3.

  Before you install, disable your antivirus and anti-spyware such as Windows Defender programs. If you are using another firewall, disable and enable Windows Firewall in the control panel for the installation. Once a requires SP3 and working, you can activate the third-party firewall and put the Windows Firewall. Do not keep the two running.

  Service Pack 2 for Windows XP
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=049C9DBE-3B8E-4F30-8245-9E368D3CDB5A&displaylang=en

  Steps to take before you install Windows XP Service Pack 3:
  http://support.Microsoft.com:80/kb/950717

  WinXP SP3 - read all the prerequisites for a successful installation
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP3-read-all-prerequisites-for-a-successful-installation.aspx

  Release notes for Windows XP Service Pack 3
  http://download.Microsoft.com/download/c/d/8/cd8cc719-7d5a-40d3-A802-e4057aa8c631/Relnotes.htm

  Download Windows XP Service Pack 3 here:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA