make a date of expiry of the coupon

Similar Questions

• HOW TO MAKE DATE VISIBLE CONSTANTLY TO THE POINT WHERE IN THE NOTIFICATION BAR?

  I know that the date appears when I hover over the time. And I noticed that if I develop the width of the notification bar, the date will appear. But I don't want to do the bar is wider. I want just the date to display next to the time. I also know that I can go into customize Notification icons. HOWEVER, there is no icon to select which corresponds to the date display. (In a screenshot of another list of users, I saw a globe-type icon corresponding to the date and time display, but is not on my list.)

  I'd like your help. :^)

  Peace,

  -Virginia
  http://www.IMDB.com/name/nm0403825/

  Hello

  You said in addition to the clock so I initially think not that you need it however, others have
  said it would be a good idea to show this method of date display. Also if you are moving
  the taskbar vertically then the date is also displayed.

  Always see the day, date and time in the taskbar
  http://freewindowsvistatutorials.com/meetWindowsVista/taskbarAndSystemTray/showDayDateAndTimeInTheClock.php

  You can increase the highest taskbar - right click it - uncheck lock the taskbar then High grad
  He and raise more high and the date which will be under the clock.

  --------------------------------------------------------------------

  I found a utility that makes T-clock - free - 3 references to it:

  Windows7 like clock on the system in Vista & XP tray
  http://www.tothepc.com/archives/Windows7-like-clock-on-system-tray-in-Vista-XP/

  TClock: See the Date Look like Windows 7 & time in the system tray in Windows XP and Vista
  http://www.askvg.com/tclock-show-Windows-7-look-like-date-time-in-system-tray-in-Windows-XP-and-Vista/

  T - Clock of the Stoic Joker
  http://www.greggdeselms.com/tclock.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Purchase contract expiry date and the date of breakdown of the course on the cover

  Hello
  
  In the blanket purchase agreement, I see the expiration date and price paused I see the date and to this day, can someone tell me the difference between these two dates?
  
  Question
  
  1. when I try to put an end date (expiry date) to one of the line I get this error message, or when I try to cancel the po line giving a reason, he throws the same error.
  
  The error
  
  "You cannot cancel or finally close this agreement line because it has open purchase order lines with reference to this document."
  
  Concerning
  
  Sudharshan

  Hi Sudarshan,
  If you are satisfied with the answer, then please mark this thread and close so that other people can return it in the future, otherwise it will create a confusion that this question was never answered/processed... :) Hope you agree with me... Let me reiterate, I'm not a greedy person on points... I just joined this forum to learn many good consultants autour.

  Kind regards
  S.P DASH

• Make the date picker opened when the user navigates to the date field

  Hi people.
  
  Anyone know if it's possible to make a date picker open as soon as a user clicks or tabs on a date field?
  
  Answers on a postcard / response received with gratitude.
  
  Kind regards
  
  Simon Gadd

  Hi Simon,.

  I think I have the answer now.

  In your area header area, add in the following:

  <script type="text/javascript">
  var ok = 1;
  function showDatepicker()
  {
   if (ok == 1)
   {
    ok = 0;
    document.getElementById('P5_DATE_IMG').click();
   }
  }
  function resetDatepicker()
  {
   ok = 1;
  }
  </script>
  

  and as attributes of the element Form HTML of the element of your date, add in:

  onfocus="javascript:showDatepicker();" onblur="javascript:resetDatepicker();"
  

  This means that your article is called P5_DATE - change according to the case.

  Andy

• dynamic action... How to make date is always before the "to date".

  Hello
  
  using a form, I ask my users to provide the dates...
  
  can I know (step by step) how to set up a dynamic action so that if it dates back to article P20_FROM_DATE after P20_TO_DATE then an error message to be generated...
  
  Thanks in advance

  OK, let's start again. Delete your current setup you date pickers and try these.

  P22_FROM_DATE settings

  Display on focus
  View other months Yes

  Use the same settings for P22_TO_DATE.

  Create a dynamic Action called say, Compare the Dates

  Event Before the Page is sent
  Condition Expression of JavaScript
  Value $v(P22_TO_DATE')<>

  Real Actions
  Action Draw the attention of
  Fire when the result of the event is True
  Text The date cannot be less than this day.

  Another real Action
  Action Update fixed
  Fire on the loading of the Page Checked
  Assigned to elements Selection type Article (s) P22_TO_DATE

  Jeff

• Expiry of the ink. Is substitute possible?

  What is expiration and why does it occur?  Expiry of the ink is built in date for some cartridges to make them stop working when the ink inside becomes too old to work properly with the machine to avoid damaging the printhead to the printer. This is to protect the system and to ensure that print quality is maintained. But it is worth noting that the majority of the HP cartridges haven't this expiry of ink feature affects only a small number of printer models.  There are also printers that have a replacement for expiration option too. To learn more about the expiration of the ink and printers have the ability to override the expiration, look at the following link.

  As always, I hope that the community will find it informative and useful!

• I get a saying of popup, that I need to install software to make sure that my browser is the latest version, but I already have firefox 28.0 and I am bit suspicious.

  I just started having this extra window that says: "RECOMMENDED updates! It is recommended to install the software to make sure that your browser is the latest version. Please update to continue. "The link says: Rvzr - a.akamaihd.NET. I'm a little reluctant to touch anything because it never happened. In addition, I've doubled checked and my firefox is 28.0 isn't up-to-date. I even re-downloaded firefox to ensure, and I always get the pop-up window.

  You're smart to be wary. You can check to see if an unnoticed add-on slipped? In particular, I suggest disable all non-essential or unrecognized extensions on page modules. Either:

  • Command + shift + a
  • Tools menu > Modules

  In the left column, click Extensions. Then, when in doubt, turn off.

  Typically, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  That get rid of the nagging dialog boxes?

• Impossible to print the coupon from purina mills

  My wife and I have both signed for the rewards program from Purina Mills so receive us quarterly coupons to feed our chickens, but we are unable to print if you use Firefox. We are able to print if you use Internet Explorer (which I hate). When I click on the link to print in the email it opens a new tab and an error message is displayed. This is what we get.

  It seems that Java is disabled or not installed.
  Please activate Java and JavaScript before attempting to print the coupon. To download Java click here.

  We downloaded Java, over and over and over and over and over etc but still the same message. Thus, our version of firefox is updated. Does anyone have an idea how to fix this? I spent so much time trying to understand it and am beyond frustrated! Thanks in advance!

  Hi bluegrass_fan76, plugin content such as Java, Flash and PDF, have sometimes been used for security exploits, so if you n ' t need a plugin very often, it is best to keep it disabled.

  Firefox has an option called "Click to play" where you can get a command prompt in the address bar to approve a plugin for a particular site. Once you turn it on, a third choice appears on the dropdown menu with "always on" and 'never activate': 'ask to activate '.

  I'm not sure of the best way to try this out, but here's the main setting, you must change:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search box that appears above the list, type or paste the Plug and make a break while the list is filtered

  (3) double-click the preference plugins.click_to_play to false to true.

  You are done here. When you return to the tab modules, list Plugins, you can now use the option 'ask to activate '.

• Cannot make or receive phone calls after the upgrade to iOS 9.3

  Can't scream: cannot make or receive phone calls after the upgrade to iOS 9.3

  SOLVED

  Went into settings,

  Cell phone,

  Cellular data options,

  then change the setting to EnableLTE OFF,

  It's for my at & t att, iphone 6 s

  No joy for me.  I can't make calls, but I can not receive or use call forwarding.  So frustrating!

• Dashboard of the LabVIEW data recover indicators of the poll

  Hello

  I have attached my entire project, including the error messages that I receive. I have my labview VI to put in place to have 3 different screws. My entries, my global entries and my "side". I created my web server and all the controls and indicators that I linked. However, when I try and run the dashboard of data project, all my indicators have error signals indicating that he "could not connect to the server. I have no idea what I'm doing wrong. Any ideas?

  The reason why this does not work, it's that your web service code is not quite structured reason. When you call a web method in LabVIEW it does is run the VI related to this method. In your case you have mapped to the URL http://host:8080/FINALCOAST/COAST.vi SIDE, and then you have a poller to web service linked to this URL. When you run your dashboard the poller accesses this URL, which causes the web server of LabVIEW run COAST.vi. If you look at COAST.vi, however, you will notice that what he does is run a loop that runs until the stop button is pressed. Is not supposed for a web method. He has no one to press the stop button. In fact, there is no user interface for anyone to interact with at all. This means that COAST.vi will work forever. Finally, data dashboard gave up and closes the connection because it should not take long for the web server that responds.

  So what is the correct way? It depends on what you're trying to do. In your case, it seems that you take just a bunch of inputs, do some calculcations and producing a bunch of outputs. You could do that in a VI with the method of a web that has just a bunch a bunch of outputs and inputs. In this case, you use just a web service calling (button) connected to one of the methods. Because this method has two inputs and outputs, you will get two entry and exit of Terminal ornaments around the button that you can use to connect to your commands (entered) and indicators (outputs). When you press the button it brings together the current values of the controls and those on the server to use as inputs to call your VI sends, and then he retrieves the results from the server and puts them in your indicators. In my example attached (see the file updated the dashboard) I show you how to do this. Note that I also modified the code of VI to create a Subvi for calculation of Basic code, and it is this VI which is used for the web service. This VI has no loop in him, so he just runs once with data values and returns the results.

  If you want to rather than having a continuous process that is continually measures your system in real time you need another way to access this data from a web service. It seems that that's what you were trying to do here, even if you use data in real time. Suppose that you were, however. In this case, you were a little close, but we need to make some changes. First of all, the running process doesn't have to be part of your web service. It may be, but it's a little more complicated. Instead of this, your process running (COAST.vi) can be just a regular VI running in LabVIEW. You just open and press run as usual. However, you want to only change VI to share its data with other processes. You have tried to do by using globals. Globals allow you to share data between the screws running in the same process, but web services actually run in a process completely separate (in the web server), so you'll need something else. A drop-in substitute would be shared network Variables. You'll see that in annex changed code I replaced your globals with shared variables. Then in your web service if you just use the same shared variables. Network shared Variables allow you to share data between processes (even on machines on the network) so that you can easily access the same data to both your VI running and your web service screw I modified your COAST.vi for this (and he calls the same Subvi from the calculation of the kernel).

  In this case, you could do just a single method "inputs" and only one "exits" method, but it might be better to break up to the less distinct modes which include the strongly bound values just to make things a little neater. It can be tedious to deal with a large number of terminals.

  Alternatively, once you use shared variables you has actually connect your controls and indicators on the dashboard of data directly to these shared variables. This has the disadvantage of requiring more ports to be open through your firewall (and you can not use security as you can do with web services), but for the use of internal network, it is easier to implement. To do this, just run your VI as before, and then as soon as it runs you can select each control or indicator in the dashboard of data, press the small button below, choose 'Shared Variables' and look for your variables on your machine. In this case, each control is directly bound to the variable, and so there is no need of a button. Changes that you make in the dashboard data are immediately placed on the server through the variable sared, and your VI (which is still running until you press stop) will see the new value, update the outputs and then repel these new values to the dashboard of data via other shared variables.

  I did not create a dashboard for the last two approaches, but if you may not know what I'm talking about, then I can create examples for those as well. The screw and the project must be configured to work in any case, if the only difference is in the configuration of the dashboard.

• The use of pins of status (4 outputs) and data (8 entries) of the parallel port pins at the same time.

  Hi all

  I'm a newbee in labview. As part of my project work, I need to get 8 digital inputs and send 4 digital outputs.so I think to use the Parallel Port on the pc.i can make use of 8 datalines for entries. I found the site NOR is it possible to use status for output pins. But is it possible to use status for output pins pins and data for entries to the time.please help even me also mention of the measures to take, or keep in mind while implementing.also include any example vi that could be useful.

  Thanks in advance

  I would recommed you to NOT use the parallel port. Now a day you have hardly a PC with parallel port. also if you have some old PC then most likely last version of LabVIEW (e.g. 2010) will need a lot more memory RAM and processor.

  If you want a solution very very low cost then I would recommend using an arduino to that effect. You can then download LabVIEW Interface for Arduino and start working.

  If you continue to use the parallel port, then you could try (I haven't worked with parallel port and have not tested the following solutions)

  Download VIPM and then install the enclosed package. It will add the port e/s palette in your labview. and you can use it.

• global variable functional to read and write data from and to the parallel loops

  Hello!

  Here is the following situation: I have 3 parallel while loops. I have the fire at the same time. The first loop reads the data from GPIB instruments. Second readers PID powered analog output card (software waveform static timed, cc. Update 3 seconds interval) with DAQmx features. The third argument stores the data in the case of certain conditions to the PDM file.

  I create a functional global variable (FGV) with write and read options containing the measured data (30 double CC in cluster). So when I get a new reading of the GPIB loop, I put the new values in the FGV.

  In parallel loops, I read the FGV when necessary. I know that, I just create a race condition, because when one of the loops reads or writes data in the FGV, no other loops can access, while they hold their race until the loop of winner completed his reading or writing on it.

  In my case, it is not a problem of losing data measured, and also a few short drapes in some loops are okey. (data measured, including the temperature values, used in the loop of PID and the loop to save file, the system also has constants for a significant period, is not a problem if the PID loop reads sometimes on values previous to the FGV in case if he won the race)

  What is a "barbarian way" to make such a code? (later, I want to give a good GUI to my code, so probably I would have to use some sort of event management,...)

  If you recommend something more elegant, please give me some links where I can learn more.

  I started to read and learn to try to expand my little knowledge in LabView, but to me, it seems I can find examples really pro and documents (http://expressionflow.com/2007/10/01/labview-queued-state-machine-architecture/ , http://forums.ni.com/t5/LabVIEW/Community-Nugget-2009-03-13-An-Event-based-messageing-framework/m-p/... ) and really simple, but not in the "middle range". This forum and other sources of NEITHER are really good, but I want to swim in a huge "info-ocean", without guidance...

  I'm after course 1 Core and Core 2, do you know that some free educational material that is based on these? (to say something 'intermediary'...)

  Thank you very much!

  I would use queues instead of a FGV in this particular case.

  A driving force that would provide a signal saying that the data is ready, you can change your FGV readme...  And maybe have an array of clusters to hold values more waiting to be read, etc...  Things get complicated...

  A queue however will do nicely.  You may have an understanding of producer/consumer.  You will need to do maybe not this 3rd loop.  If install you a state machine, which has (among other States): wait for the data (that is where the queue is read), writing to a file, disk PID.

  Your state of inactivity would be the "waiting for data".

  The PID is dependent on the data?  Otherwise it must operate its own, and Yes, you may have a loop for it.  Should run at a different rate from the loop reading data, you may have a different queue or other means for transmitting data to this loop.

  Another tip would be to define the State of PID as the default state and check for new data at regular intervals, thus reducing to 2 loops (producer / consumer).  The new data would be shared on the wires using a shift register.

  There are many tricks.  However, I would not recommend using a basic FGV as your solution.  An Action Engine, would be okay if it includes a mechanism to flag what data has been read (ie index, etc) or once the data has been read, it is deleted from the AE. 
  
  
  There are many ways to implement a solution, you just have to pick the right one that will avoid loosing data.
  

• Error - 'Auntentication with the server failed. Family Tree Maker software does not connect on the Web dashboard.

  Original title: Family Tree Maker does not connect on the Web dashboard.

  My Family Tree Maker 2009 does not connect to the Internet comes up with the message which is cannot authenticate the server, but it tells me that my version is up-to-date.  He has always worked so far? Comes with the following message if I try to do anything that involves the net.

  "Auntentication with the server failed.

  Hi HelenTL,

  You did changes to the computer before this problem?

  If you have any software security & firewall installed, disable them temporarily and check if the problem persists.

  
  Note: check to allow them back on the computer after you complete these steps.

  Hope the helps of information.
  Please post back and we do know.

• Re-installed XP Pro. Now can not access data dynamic disk on the HD 2

  Hey all. Good here we will...

  My system has TWO SATA drives. A year ago I converted both Dyamic discs thinking I could use them in a RAID, but decided to do it. So, since that time I am using OS + critical data Disk1 and Disk2 as a backup (compressed image of Disk1).

  My question is now, I have re-installed XP Pro on disk 1 and my computer does not allow me to see the data in Disk2. XP Pro detects disc 2 as "base" and asks me to format it. However, my BART PE bootdisk shows 2 disk as dynamic and he can't read.

  This is where I am. I'm trying to understand how to read data from disk 2. Whether some use of software 3rd party or a way to get XP Pro to see the data.

  Check the knowledge base on best practices with dynamic disks.
  http://support.Microsoft.com/search/?adv=1
  For example.
  http://support.Microsoft.com/kb/329707

  "Dynamic disks use a private disk region to maintain a logical disk manager (LDM) database, which contains the types of volumes, offsets, memberships and the drive letters of each volume. The LDM database is also replicated, so that each dynamic disk knows about every other dynamic disk configuration. This feature makes dynamic disks more reliable and recoverable than basic disks. »

  You suggest that your second drive can still have a copy of his information LDM. In other words, as long as you did not "commit a sin" as defined in this article.

  See 'import records' here and see if 'Foreign' is displayed for the drive in disk management.
  Disk management is where you want to look for info on the disc.
  http://TechNet.Microsoft.com/en-us/library/bb457110.aspx#EEAA

  Another response of the community of Windows XP newsgroups

• Netflix in Media Center returns a 'there was a problem of data recovery. "Check the works of your internet connection and try again" error instead of loading Netflix data.

  context: a previous thread with an identical title never responded, the problem just disappeared.  Well its been two weeks since then and the problem came back.

  somethings which may or may not apply: internet TV seems to work better in media center.  All updates have been applied to H.P. of Vista SP2. Netflix works fine in ie8 (such as the internet, of course). Tried to delete all the Internet Options, delete browsing history section of Internet Explorer. I get the same error message with my windows 7 professional media center, but netflix seems to play anyway (no game with vista). I recently installed quicktime alternative 2.72 to see what it was and how it worked, then removed and put back in quicktime.

  Tried / symptoms:

  -Remove all the browsing history (econcepts)
  -Same message on Win7pro but works even when (econcepts)
  -Works on Win7 no problem (omegafiler)
  -Works in ie 8 (econcepts)
  -Works in crome (Martin TX)
  -Consensus is that it started around December 30, 2009 (GeoffG1, johnetX, me)
  -Remove and reinstall silverlight (omegafiler)
  -Remove and replace netflix plugin (omegafiler)<- how="" did="" you="" do="" that="">
  -Netflix says: microsoft problem (Nitestalker)
  -Microsoft is silent (this thread - on vacation?)
  -Same problem on 32-bit and 64-bit VMC (JRSMiamiFL)
  -No applied update (johnetx)<- perhaps="" date="" related="" or="" drm="" date="">
  -Disconnect from netflix, you reconnect again - ultimately the same error (chicagokiwi)
  -Tried to reduce the number of items in the queues to well below the limit of 200 (econcepts)
  -Tried the register / unregister the third wire procedure, no joy (does not break anything else however)
  -Disabled the firewall, no change (econcepts)

  related topics:
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/0c154c0a-1fcb-4353-8c5e-b394e885256d

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/aaab24a0-4BB9-42FA-a5ee-46a733d6560f

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f05f69c7-6456-4117-B302-27c08886ea1e

  Someone else knows Netflix not being is not able to connect?  It started yesterday (30/12/2009) for me.  I looked fine the day before without problem.  The message I get says "there was a problem of data recovery.  Check the works of your internet connection and try again. Ok.  I make it work with both my VMC - one with the service pack and the other without.  My OS updates have been loaded in early December, so I don't see how this could it be.  I searched and found this problem has come up before, but I have not found a solution.  I made NO changes to my HTPC.

  Those who have and solved this problem.

  UPDATE UPDATE UPDATE UPDATE UPDATE UPDATE *.

  2009-01-05 has attempted to start Netflix this morning and you know, it works on both my VMCs.  That's the good news.  So now the real questions are:

  Only 20 people reported it as a problem and only 6 on the green button.  I believe that it affected all the world with Media Center.  So why not discussed much?

  It already happened, causes a stir and silently slips without known cause or cure.  How can we find out what caused this and how to prevent it from happening again in the future?

  *******************************************************************************************