Expiry of the ink. Is substitute possible?

Similar Questions

• HP Vivera Photosmart 3210: EXPIRY of the INK. can buy black ink only and print n & B with the range of printers hp Vivera 3210?

  all ink has expired. can I buy only black ink and print n & b with hp Vivera printer, photosmart 3210 all-in-one

  and black and white printing only with color expired ink in there?

  Hi @peanut7949,

  I believe, with this model, you can continue printing with inks has expired. That being said, if you replace only the black ink and continue to print with others (expired), it should be fine.

  Here's what I could find on the subject:

  Each ink cartridge has an expiration date to protect the printing system and ensure a good quality ink. The cartridge expiration date appears on line 53 of the free test report.

• The operation of e/s specified on Device\Harddisk2\DR4 was not completed before the expiry of the time-out period

  The operation of e/s specified on Device\Harddisk2\DR4 was not completed before the expiry of the time-out period

  I did no changes on my computer for functionality, commissioning due to above mentioned problem goes & long

  Hi KarlMaskery,

  1. When you receive the error message?

  2. you have any external hard drive connected to the computer?

  3. do you have security software installed on the computer?

  4 when was the last time it was working fine?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Replacement of the ink cartridges

  I bought two identical HP Photosmart printers.  One to my winter home and one for the summer place.  When I come back and back, can I remove the ink cartridges and bring them with me?  This will keep don't dry them out, while I'm gone.

  I had clogged the problems of print head with Epson printers.  The beauty of the design of HP is that the print head is part of the ink cartridge.

  What printer model? Some Photosmart printers integrate the print heads (IPH) and consumables, others have individual ink cartridges (IIC) with separate print heads.  For IPH printers it could make sense to take the cartridges with you *, this isn't the case for the IIC printers.  Be aware that the low on ink indicators will not properly work on the second printer that the printer know that the cartridge has been used but will have no way of knowing how.

  * When you remove a printer cartridges don't put tape on the cartridge nozzles, as this may cause damage. The best would be to use the "cellar" that comes with photo cartridges.  If this is not available, it is possible to put cartridges on their side in a Tupperware of size "sandwich" with a few layers of wet paper towels on the bottom.  Do not let the nozzles touch the sides or anything else, because this would cause damage, especially for the color cartridge.

• When traveling in a car, what care should be taken with the ink cartridges

  Win XP

  HP deskjet 1000 j110

  When I take this printer on a road trip (700-1000 miles), should I remove the ink cartridges (type 61)?

  No, the cartridges should be left in the printer.  For best results keep the printer out of direct sunlight and avoid large temperature extremes as much as possible.  Also keep the printer in a standing position, avoid turning on the side or end.

• the ink cartridge is false

  I bought a new cartreidge of black ink when I opened it it was yellow, he was sealed by the company...

  Another question that when I got a new one, that it has not been filled the computer gives me a message that the black ink is very low...

  I got to see what the problem saw that ink is not on the roll, it is right in both right and left... in the Middle, it's clean.

  I asked the guy I bought ink since then, he said that the proplem comes from the factory not to him.

  What could do >

  Spoiler (Highlight to read)

   

   

  Spoiler (Highlight to read)

   

   

  Hello lovelylooly,

  Welcome to the Forums of HP Support!

  I expect not to see a yellow of ink when a boxing a black, which is very strange. What is the model of printer , so you buy inks? Is it possible to post a photo or two of the package, as well as the product number of the ink?

  Thanks for posting and I hope to hear from you

• HP Deskjet 3055 has. Unable to see the balance of the ink in the cartridges

  I have HP Deskjet 3055 has (3050 all-in-One series of J611). So far, when I clicked on the HP icon on my desktop I have learned how much ink is left in my cartridges. Now I can't learn this - all I can learn from the icon is the current position of any current print job. Also, I used to be able to order the new printing caridges via my HP icon - I think that it is now not possible. What is the answer. I had thought to unplug the printer and then reinsert new with the original CD. This seems a radical step but is it the solution?

  Hello pm1810,

  Welcome to the HP Forums!

  I understand that you are unable to see the ink levels using the HP icon on your desktop. I will do my best to help you! What is your operating system on your computer? Click here to read: Windows.

  When you click on the HP icon on your desktop, is it called the wizard of the printer? How is the printer connected? USB or wireless?

  If you are referring to the Printer Wizard and you are unable to access to the 'estimated ink levels' and a 'supplies shop online', then I recommend you to uninstall the software:

  Please follow this HP document uninstalling the software of the printer. (If this printer is connected by a USB cable, then disconnect the power cord from your computer.) Be sure to choose your appropriate operating system. Then, please clean the Temp folder on your computer. I'll give you a document here to help you.

  Now, install the full features on the site of HP software here. Choose your appropriate operating system. If you are still having the same problem, could you please send a page on this post.

  Impatience on your part have a beautiful day!

• I replaced the ink cartridges, but the printer still shows empty black cartridge. How can I reset?

  I have a HP Deskjet 3050 a - J611j all-in-one printer.  I use Mac OS 10.7 Lion.   I replaced the empty ink cartridges.  Now it shows the color cartridge is full, but still shows black cartridge empty.  Is it possible to reset it?

  Hi Shanmarie1103,

  If the cartridges are rebuilt you will not get a read out on the ink levels. You will need to use a new OEM cartridge with a new chip for the ink levels. Click on the links below for more information.

  The truth about remanufactured ink and toner cartridges

  Price of ink

  

• Cyan is not printing on HP Officejet Pro 8500 has more - Air bubbles in the ink tubes

  Hi all

  I know why cyan is not printing.  It is because of the following:

  Ago, I ran out of ink cyan printing ("please replace cyan before continuing").  I live in a remote area and was not able to buy a replacement cyan cartridge, so I read on a hack on the Internet, that was to fool the printer into thinking that the cyan cartridge remained inside ink (just basically restricting the measure gauge so that it read the Full cartridge).  I did it because I had a print document that requires only the black ink, so I knew that this wouldn't be a problem.  Then life happened and I completely forgot my little shortcut, and my wife printed a number of color photos.  I finally had time to cartridges, and I now understood that cyan is not print at all.  I have now opened up the printer and realize that the cyan ink tube is full of bubbles...

  I tried to fix this by printing A4 pages that are for the most part, cyan, but without success.  I even tried to put pressure on the ink cartridge cyan in order to flood the cyan ink tubes - also, it does not work.  I read somewhere that there is a way to actually get some printers to pump tubes with ink, is - it possible on the Officejet Pro 8500 has more?

  Of course, I did all the tools that are pre-set to the arsenal of 8500, but still no luck.

  I know I'm in the situation I am purely because I don't use the device as intended, and people that no one is to blame but me, but I'd appreciate any help you could provide.

  Thank you

  John

  John, looks like you have a problem with the ink system. Unfortunately, what it looks like happened here, is that your ink nozzle, tubing and probably-print head have put dry for cyan. Work around is pretty neat, but it really is only recommended for a very temporary solution. If the ink has dried in the piping, but elsewhere in the printer then can be a decent chance that this printer will be not likely reprint the cyan. You can try to run the automatic cleaning process (up to three times I would say) via the Tools menu in the Setup (the wrench).

  In addition, I'm not sure that this will be a question that has a simple resolution. Apologies, John.

  -Spencer

  PS Hope you have a wonderful day and that your time is as beautiful as she is here!

• Cannot use CS6 after the expiry of the CC of the trial

  H, I I work on a desktop with Windows 8.1. For a distance learning course, I got a one InDesign a Photshop Cloud version installed for 4 weeks on my desk. On this, I have a version of Adobe Creative Suite CS6. Now, after the expiry of the OBA of cloud I tried to work with my office versions. This ist is more possible, because I always get a note that my cloud-Abo has expired. It is not possible to remove the cloud of my desktio ist program. How can I use my version of office again?

  Cloud of reading also includes https://forums.adobe.com/thread/2089127 for ideas (see answer #1).

• Change the density of the ink in the ink with Javascript Manager?

  I have a predetermined spot used inks we use do not follow the same predefined density conferred by Indesign. Lighter colors are less opaque. or with lower densities. What interests me, in doing so, is to have a script which evaluates the inks used and assigns the correct values without user intervention. I wonder if this is possible. The density of these effects inks it order of trapping.

  Yes I finally thought to it. Sometimes, its just a small piece of the puzzle so it meets.

  myDocument = app.activeDocument;

  densityChange();

  function densityChange() {}

  for (i = 0; i

  var name = myDocument.inks [i] .name;

  density of var = myDocument.inks [i] .neutralDensity;

  If (name == '706 white') {}

  Density = myDocument.Inks [i] .neutralDensity = 1.7

  }

  }

  }

• What is the best way (and possible) to remix a song mixed

  GarageBand 10.1.1

  10.11.4 OS

  Mac Book Pro

  16G RAM

  Hobby old YR 68 recording guy/try to leave a legacy

  What is the best way (and possible) to remix a song mixed

  I have a song that is most often improvised, I was told that his cool, however, re-registration is not possible.

  After reading a lot on the mixture, I now hear where the uneducated choice and errors that I made which explains the sound "not as good" that the song is.

  Before I just jump in and try to undo the settings on the tracks (one is DRUMMER) to return to the raw track before effects/eq/compression ect. is is possible to do?  Opens the unfavorable mix, rename it, save it and just go to work and cancel or disable 'things '.

  The basis of the lean mixture comes even to the root where I 'hot' securities, (orange and red)

  I guess by now you understand my question and I am open to a favorable opinion.

  Thanks in advance for your help.

  jojoguiitar_mn_usa

  I read this question so many times and I can't seem to figure out exactly what you're asking.  You just ask if you can go back in your GarageBand project and edit your tracks again?  Of course, you can, why not you?

• HP Officejet Pro 8600 + "there is a problem with the printer or the ink system... »

  I have a HP Officejet Pro 8600 + which is coming up with an error message. This just happened out of the Blue yesterday. The printer is a little older than a year.

  It is said:

  "There is a problem with the printer or ink system. Printhead not missing not detected incorectly installed or incompatible.

  I've deleted and reinstalled ink cartridges, head, unplugged, cleaned up, etc etc.

  HP Officejet Pro 8600 +.

  Product number CM750A
  Sequence number {content removed}
  Not under warranty

  Please notify.

  I'm sorry that you are experiencing this issue. Here is a link that can help you with the ink system.
  http://goo.GL/BXDFf
  
  It seems to be a bad printhead, or it needs manually cleaned with water and lint. If these steps do not resolve the problem, contact HP (1800-474-6836) support.

• My ink carriage does not move to the way to replace the ink cartridges. I think I put the ink in the wrong office

  My ink carriage does not move to the way to replace the ink cartridges. I think I put ink in bad officejet 3830

  Hello! Welcome to the community @Tammy111 HP

  I read your post about the ink carriage being stuck in your Officejet 3830, and I wanted to respond to troubleshoot. Try these steps and if the transport is not yet move to order so that you can access the ink, then your best bet would be to call phone support to see if they can replace the unit for you. I'll leave their details below.

  HP OfficeJet 3830, DeskJet 3830, 5730 printers - an error 'Transport Jam'

  Click on the thumb to below testify my help!

  Click on the "accept as Solution" if I'm you guide to a solution!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number appear

• How to: perform a reset of the ink system

  When ink troubleshooting related issues, be it an error of cartridge of ink or the impossibility to print one multiple and certain or colors, one of the first steps to try is a reset of the ink system.  This resets the system of ink in the printer and get rid of all the false errors.  I will outline the steps below.

  Perform a reset of the ink system:

  1. While the printer is on, remove all printer ink supplies.  This includes all the cartridges and printheads, if it is removable.
  2. Unplug the printer from the power source while on and no ink in the printer supplies
  3. Get a clean, lint and clean water
  4. Use the cloth and water to wipe the electrical contacts of the cartridges, the contacts inside the printhead for cartridges, the contacts on the back of the printhead that connect to the printer and the contacts in the printer that connect to the print head
  5. Wipe the contacts so that the water is in/on the system
  6. Plug the printer back to the power source, without ink supplies
  7. Insert the print head when the printer turns on and shows the printhead is missing
  8. Insert the print cartridges when the printer indicates that the cartridges are missing.  Do one at a time to ensure that the error is not from one of the cartridges.  The upper part and insert the first cartridge, and then close the top.  The front of the printer should, then, indicate that the remaining colors are missing.  To do this individually with all the cartridges.
  9. Once the print head and cartridges are installed, then the printer will attempt automatic alignment.  Once the alignment is complete, reset/Reset ink system is over.

  If the error or problem continues, then move the additional steps in the document troubleshooting for this issue.  This is just the first step to help clear false errors that may be present.

  Hope it will be useful for anyone who needs to perform this reset.  Good impression.