Make a simple user interface in Premiere Pro using Javascript

Similar Questions

• Lost the user interface in Premiere Pro?

  A few weeks ago I signed up for creative cloud. I started using the first Pro CC. I knew that I couldn't take advantage of the Mercury engine because I have ATI Radeon HD 4870 512 MB. I was still able to edit and work. Today I went to send timeline to grade speed and it took forever to export, finally to halfway to send it, I gave up and revived Premiere Pro. When the first opened my UI had disappeared. Drop-down menus have all their but disappeared from the user interface. If I went in create new title, I could see that window, but the chronology, garbage, source and windows Records were not visible. I know that the sequence is always there because if I hit the space bar the sequence plays through my Kona card. I closed the first and I got a pop up menu Nvidia Cuda ask my update of drivers. It's strange because I have a card ATI not a Nvidia card. If I open all the other apps After Effects or Photoshop, all of the user interface is here. What gives?

  My specs: CPU 2 x 2.26 GHz Quad - Core Intel Xeon,.

  12 GB 1066 MHz DDR3 ECC memory.

  ATI Radeon HD 4870 512 MB graphics card

  AJA Kona IO Card

  Ann Merci for the info, Ann. However I realized that it was just that the interface was dragged all the way upward under the white bar that says first projects.

  When I saw the arrow pointing down I realized that I had to just drag the interface down. Simple mistake. Thanks again.

  Patch

• How to increase the size of the menus/user interface in Premiere Pro?

  Hello

  I just bought a new laptop its 1920 x 1080 = Windows 8.1 and I use PP CS6...

  Now, when I opened this whole interface is so tiny, I can hardly read any of the menus! I've tried all the settings of the computer and the size increased, but it only adds to the text in the drop-down menus...

  Help, please!

  Hi ChloeCphoto,

  The interface size user cannot be changed.

  Thank you

  Ilyes Singh

• Closing references ActiveX correctly in the Simple user interface

  Hello

  I am currently editing the user supplied with Teststand 2013 Simple interface in order to access the global variables of the station through LabVIEW.  A simple test, I'm trying to access the value of username.  When I run the VI for the first time after the opening of LabVIEW, I get no error message and the program works as required.  Stop the running VI will return no error, but when I try to run the VI and rerun the Teststand, stalls the execution sequence and I get a wait status.  I then have to close running VI by killing all threads in Teststand, I think that the PropertyObjects do not come out properly and I find the structure of the event quite confusing to deal with.

  My attempt to close the references in the while loop looks like this:

  

  The rest of the program is exactly as expected with Teststand 2013.

  Any input on how to close properly references ActiveX and extracting station globals in LabVIEW would be much apreciated.

  Thank you for your help,

  Christian

  Christian,

  Doug is correct if you open references in a loop, you should also be closing them in the loop. For example, this code open a reference to the engine and the Globals PropertyObject. Two of these references must be closed each time that the loop is executed with the current code.

  You might be able to improve this code is to put your username querying code elsewhere. This username appears as something that would happen only when a user connects or disconnects, then perhaps that this code could be registered as a reminder of the event UserChangedevent. Follow these steps in the VI of reminders set up event of the user interface.

  If you do not need this code to update constantly, you can put in the structure of the event time-out event in your screenshot and fix a reasonable (maybe 100 to 200 ms).

  Hope this helps and let us know if you have other questions about this!

• Using "Keylines" to help make the titles broadcast safe in Premiere Pro

  Hello

  I use the following great link provided by Bill Hunt to help make downrezzed to look reasonably good SD HD titles.

  http://library.CreativeCOW.NET/articles/hodgetts_philip/titles.php

  I have a question about the screenshot below, taken from the link above:

  

  I understand the notion of "keylines" here, but I'm not sure how to make that happen within my title options menu.

  Does have another name in Premiere Pro?  My search for "keylines" in the Help menu has been in vain.
  
  In addition, in this context, the "80-204/204/204" numbers mean mean?

  Thank you!

  Matt

  No, probably just outside. They are useful here, while the Interior would be just if you need a specific look.

  The numbers, by the way, are the RGB values.

• in the simple user interface, where execution view column spacing is fixed?

  I used TestStand UI SequenceView control property to change the view of the execution in the LabVIEW simple operator interface. I can see the change when I start at the beginning of the IO, but then it goes back to the original format as it is running. I can't find where it is changed in the code. Does anyone know?

  The photo in the attachment worked for me.

  I think you need to do after the start of IApplicationMgr invoke node.

  Kind regards

• update time system with a simple user interface

  Hello

  I need to update the time on the simple IO system but when I use 'get the time system and date.vi. The indicator on the front is not updated every second, there are at least 5 seconds delay. I tried to use parallel so that the method of the loop, but the problem still persists

  Any ideas guys?

  Concerning

  VERP

  In fact, I found the flaw. Fault is with 'ME '.

  I was operating the VI on a remote computer in the LABORATORY and there was delay in the transmission that is why while I scratch my head. Time of VI display correctly to the computer in the lab.

• Clear sΘquence in Premiere Pro using ExtendScript

  My work is almost done, but there is a simple question, how to remove the sequence using ExtendScript?

  In my script I can clone, rename, move the footages, WAV, pictures etc, but I can't delete it.

  In Data Browser (ExtendScript) it is app.project.deleteSequence (), but what are the arguments for this function? I know QE and I found only one thread on this topic (https://forums.adobe.com/thread/1977423?start=0 & tstart = 0), there is no response, how it works. For many years, I'm waiting for the manual PR as a Guide of the effects scripts after = ( )

  
  

  In my project, there's a sequence I need to make a copy, create some footages and titles, then rename the cloned sequence, export it as a Premiere Pro project and remove it. Everything works perfectly except the last.

  This is the part of the code:

  app.project.activeSequence.clone(); // create "old_seq copy" from "old_seq"
  var nI = app.project.rootItem.children.numItems;
  for (var i = 0; i < nI; i++) 
        {
           if (app.project.rootItem.children[i].name == "old_seq copy") 
              {
                var item = app.project.rootItem.children[i]
                       item.name = "new_seq";
               }
         }
  --------------------------------------------------------------
  /*--*/
  for (var i = 0; i < nI; i++)
        {
         if (app.project.rootItem.children[i].name == "new_seq") 
             {
               app.project.deleteSequence(); //<--- this is just an example of the line, but how to delete "new_seq"?
              }
         }
  

  I can't find anything about this in PProPanel. It is possible at all?

  Thank you!
  

  There is no scheduled Scripting Guide for the organization. Potentially comforting: > 140 panels there to use today which depend on ExtendScript API of the body, and none of them had documentation either.

  It is not possible at all. Best thing: move old sequences in a sandbox that you create, named something like "Andrei_says_to_delete_these".

• Best editing for Adobe Premiere Pro using laptop and external drive

  I'll confess that I'm not a particularly technical person. But I am learning!

  So I want to ask a simple question and hopefully get some good advice.

  I'm editing a feature-length documentary on Adobe Premiere Pro. I have a lot of HD footage, and I want to optimize my drives to optimize performance. To that end, I recently bought a StudioRAID 4 to glyph.

  I currently work for a Mac Book Pro. I use Mac OS 10.9.5.

  Processor: 2.66 Ghz Interl Core i7

  Memory: 4 GB 1067 Mhz DDR3 (2 GB 2 benches)

  I searched a bit on how to better implement my discs, getting some useful infor here: https://forums.adobe.com/thread/662972 and here: https://www.video2brain.com/en/lessons/optimizing-hard-disks

  But there is a little too much information - and I'm getting lost. Use a 2 disk configuration tips? Or should I partition my drive of new glyph and use the 3 disc mounting configuration.

  I'd appreciate certainly all of the tips!

  Thank you

  Rebecca

  partition the disks will not help and will not change readership by this ranking. better performance would use raid-0 on the StudioRaid of glyph and 2 disk configuration in the table. Make sure that there is a backup of the raid, in case something happens.

  also 4 GB of ram is dangerously low, you can upgrade to 16 gb.

• Premiere Pro uses all resources

  There is a lot to consider here, but when I visited, only about 50% of the CPU is used, while close to 42% of RAM.  However, there are a lot of hardware specification I should mention and rendering settings as well, on top of all the effects that I've applied, then let's go through each of them:

  Material:

  5960 X CPU

  2 x NVIDIA Geforce GTX 970

  32 GB DDR4 RAM

  256 GB Samsung 850 Pro (Premiere Pro and other programs installed here)

  1 TB Samsung 850 SSD Pro (film Source layer and rendered output)

  Now, we must also mention that I used an After Effects composition that I've linked in Premiere Pro that I THEN modified with SpeedGrade.  None of the pictures was made in this process.  So back on the effects that I applied.

  It is a 1.21 GB, 6 minutes, 1080 p, shooting video AVCHD in 59 FPS which has been modified with (it started in After Effects) corners, slightly corrected with optics Compensation, and then had a Compound Blur (blur Maximum set to 2.0) applied to him, all these effects for the duration of the 6 minute video.  Yes, it sounds like a large number, and it is.

  That After Effects composition has been linked in first and then open with SpeedGrade, where all kinds of ranking makes me, by stresses to shade and saturation.  Then, he was referred to first.

  So naturally, after all that, no matter how good my material, I was expecting a long render time.  What I wasn't expecting a 50% CPU usage only and nearly 42% of RAM of its use.  I did not follow the GPU activity during these renders.  So, which makes me wonder, what are my export settings and which programs are using the CPU?

  It was exported directly from within the new version of first CC 2014 (there is no update available).  I essentially corresponded to the source in everything (I was exporting no audio either) and did not "Use restore maximum quality" checked.  Isn't that 1 pass and flows have been set a target of 10 Mbps and a maximum of 12 Mbps.  So these are the export settings, but now, we need to know that I put the software to use.

  Seeing the Task Manager, even if I export from Premiere Pro, since nothing has really been done to images in Premiere Pro, After Effects takes the largest part of the CPU, to 45% while the first takes up the other 5%.  So I look at my settings memory and multiprocessing, I even if I understood it, to see that I set them as follows:

  

  I tried messing around and changed a lot of these different settings, but I have not seen much difference.  However, there are many combinations that yet, I have to try.

  I know that the time for export will be long.  But, given all the above, why only half of the CPU used?  I know that the 8 is half of 16, as you see above (which seems to be a hint), but change that number to something lower did not alter the use of the CPU, I don't understand.  If I have to give an estimate, it takes probably about an hour and twenty minutes to export what I mentioned above (which is not too bad of a time given all the effects that I applied and it was exported to 59 FPS).  So, to sum up, are there other settings I should change to make more computer resources are used during the export process somewhere?  What don't get me?

  Multiprocessing AE is processing several frames and not multithreaded like many believe. AE threads on as many threads as systems manage to the limits of Windows for a group of processor. However, the treatment several frames is much more aggressive and regular application where permitted. Otherwise AE will simultaneously be multithreaded on 1 or 2 frames against multiple images for each instance.

  Eric

  ADK

• How to return disk space that Premiere Pro uses when editing?

  I use Premiere Pro on a Mac to edit video. Whenever I have a project, I noticed that a lot of hard disk space is missing. I deleted all of my video files and almost all my project files. I have released as much as 100 GB of space and after the editing of a large project, more than half of the TI had disappeared. I went in Finder on Mac to see if I could find were the room isn't, but I'm not able to see all the really big files that could be made of the space. Does anyone have any suggestions? I'm at 7.6 GB on a 500 GB hard drive. Can not know where will all the space.

  First of all, most of the people working in these programs use more than a sub-Go of disk.

  Second... I don't think you have check your files from the cache, the database & such? Look in the drive of the project files tab / Scratch...

  Describes circles are the "bits" on your computer, parts of arrows are the location. You have to put in a place you can easily find & em empty from time to time.

  

  Neil

• AE freeze for a while during the passage of Premiere Pro using dynamic linking

  Hello

  I use Premiere Pro with dynamic links to AE constantly. In this particular computer I had it for 3 months without any problem. A few days ago began almost every time I change first Pro AE (CMD + Tab), a little bit at the beginning and now, a LOT of freezing. It takes several minutes for AE start working again.

  Looking at activity monitor the % CPU for AE when this happens is over 100 and often red (not admissible). Time range from 10 seconds to several minutes. I work with this constantly so I have to be able to move quickly from one to the other.

  Some details of what I am working with:

  OS X Yosemite 10.10.3

  iMac (retina 5K, 27 inches, end of 2014)

  4 GHz Intel Core i7 processor

  32 GB 1600 MHz DDR3 memory

  Graphics AMD Radeon R9 M295X 4096 MB

  First Pro CC 2014.2 Version 8.2.0 Build (65)

  After effects CC 2014.2 Version 13.2.0.49

  I tried to uninstall and re-installation of AE, Premiere Pro and Media Encoder (in desperation) and the recommendations of Adobe support I run repair permission to drive on the boot drive, as well as through all the permissions in disk for all the Adobe folders and subfolders... No use, it keeps freezing like I use it. Memory RAM remains a good 20-25 GB when this happens. I'm running out of options.
  

  
  

  Any ideas what could be the cause and what I could try to fix it?

  
  

  Very appreciated
  

  I found the problem. HAVE nothing to do with the files, but with the huge amount of compositions that are related to the time wherever I have reach about 30 or so it starts to slow down.

  Solution, keep the compositions related to various projects of the AE. Works like magic again. Thanks for the help anyway!

  Enrique

• help with a simple user interface for video flv with benchmarks AND buttons

  Hi all

  OK, I built a very simple FlashDrive using the componet video and I used in the flv file cue points, then I used simple buttons and findcuepoints code snipets for make my buttons go to a certain part of the movie.

  Everything works very well.

  Now what I do is when a certain amount of point play button stay an overstate and once made part of the video or another button is clicked on the first North of the State and the new part back button or the new button have the overstate.

  I think it will be an easy task, I'm not sure how to in this regard.

  Any help greatly appricaited.

  code below

  start_btn.addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint);
  
  function fl_ClickToSeekToCuePoint(event:MouseEvent):void
  {
      var cuePointInstance:Object = vid.findCuePoint("ch1");
      vid.seek(cuePointInstance.time);
  }
  
  
  ch2_btn.addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint_1);
  
  function fl_ClickToSeekToCuePoint_1(event:MouseEvent):void
  {
      var cuePointInstance:Object = vid.findCuePoint("ch2");
      vid.seek(cuePointInstance.time);
  
  }
  
  ch3_btn.addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint_2);
  
  function fl_ClickToSeekToCuePoint_2(event:MouseEvent):void
  {
      var cuePointInstance:Object = vid.findCuePoint("ch3");
      vid.seek(cuePointInstance.time);
  }
  
  ch4_btn.addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint_3);
  
  function fl_ClickToSeekToCuePoint_3(event:MouseEvent):void
  {
      var cuePointInstance:Object = vid.findCuePoint("ch4");
      vid.seek(cuePointInstance.time);
  }
  
  ch5_btn.addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint_4);
  
  function fl_ClickToSeekToCuePoint_4(event:MouseEvent):void
  {
      var cuePointInstance:Object = vid.findCuePoint("ch5");
      vid.seek(cuePointInstance.time);
  }
  
  ch6_btn.addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint_5);
  
  function fl_ClickToSeekToCuePoint_5(event:MouseEvent):void
  {
      var cuePointInstance:Object = vid.findCuePoint("ch6");
      vid.seek(cuePointInstance.time);
  }
  

  I try to help, but you will need to apply your neurons to make it work with what I have already explained (three times with what I propose below).  Try something like the following (I'm rename your buttons for ch1, ch2, ch3, ch4, ch5 and ch6 so that the same functions can be shared by all the buttons...)

  This affects the listeners to all 6 buttons

  for (var i: uint = 1; i<7;>

  This ["ch" + String (i)] .addEventListener (MouseEvent.CLICK, fl_ClickToSeekToCuePoint);

  }

  It deals with one of the 6 inclinometer when they are clicked

  function fl_ClickToSeekToCuePoint_1(event:MouseEvent):void

  {

  BTN var = event.currentTarget;

  var cuePointInstance:Object = vid.findCuePoint (btn.name);

  VID. Seek (cuePointInstance.Time);

  resetButtons();    What makes all the buttons back to normal

  btn.upState = btn.overState; What makes the States of change of the button clicked

  }

  function resetButtons (): void {}

  for (var i: uint = 1; i<7;>

  This ["ch" + String (i)] .upState = this ["ch" + String (i)] .hitTestState;

  }

  }

  To do this, your buttons need to have the same work as part of hit as they do under the top.

• I have 6 profiles but should clean up so I did only 1 'inbox' and 1 'sent' - just converted from Eudora 7 and trying to make the similar user interface.

  I just converted to Eudora paid 7 (after many years) to Thunderbird, due no problems of SSL certificate supported by Eudora.

  So far, I like Thunderbird but tried to imitate the simplest UI for Eudora. In Thunderbird, my 6 profiles are listed, each with its own subfolders «Inbox, drafts, sent, Trash & Archives» There is a long list of menu on the left side of my screen.

  Is there anyway that I can consolidate these profiles so that all incoming messages appear in an Inbox, regardless of the target profile. Similarly, can I consolidate the 'sent' and other subfolders?

  Thanks for any help you can give.

  Dave (Thunderbird newbie).

  lets start terms.

  A profile is something that keeps all your settings of Thunderbird. I think that your calling account profiles. but I could be wrong.

  You have two options here.

  First for POP e-mail accounts, you can use the global Inbox Menu Tools > account settings > server settings > advanced Note that makes the account disappear from the folders pane, so that the messages should be moved to the Inbox of the local folders first.

  For IMAP accounts, there is the unified view of the folders view menu > folders > unified. IMAP accounts can simply not use a record combined due to the synchronization of messages with the server.

  Be very sure of what type of account you set up. IMAP accounts for those who have not used their and aren't aware of the synchronization of emails can be a 'new game '.

• Change the Simple user interface for 2 Sockets example

  Hi gentlemen, I'm changing the sample application "simple labview UI" taking two, but after I did probably, I just second requeteexecution displays the socket running frist requeteexecution left blank (grey). attached the picture. Relatively, the drop-down list on top of the requeteexecution box is also empty. (However, if you click the drop-down list and select right sleeve, the first requeteexecution appear right by running the sequence). Please someone check my code to see my mistakes, thank you.

  I tried to integrate this code and it works very well with a parallel sequence in the example.  Specifically, look at my implementation of 'DisplayExecution event Callback.vi.  I hope that this solves your problem.

  Pulido Technologies LLC