make a Subvi do something on first convocation

Similar Questions

• Can I use a font that comes with a subscription to Adobe first Pro CC to make a video intro with Adobe first Pro CC, for use in videos from Youtube that will be monetized?

  Can I use a font that comes with a subscription to Adobe first Pro CC to make a video intro with Adobe first Pro CC, for use in videos from Youtube that will be monetized?

  If so, I'll be able to continue to use this intro for these purposes, if I decide to leave the subscription?

  I looked this info on the EULA for Adobe fonts and the font itself, but the information was not conclusive.

  Thank you!

  Licensing - in particular for fonts - is always a big pain - and even if you have a lawyer paid handsomely on the case, it is always a challenge to navigate in all licenses of the difference and the different situations.

  In reality, the chances of trouble to use a font Adobe provides as part of the suite Creative Cloud is little or none - even if it's TECHNICALLY in a kind of fine print.

  However if you are doing a project where you must provide tangible evidence that everything is legally more High Council (which you have to do a lot of time for projects that are funded for example the Government), then things can become difficult.

  In the case of Myriad Pro - even though the creative cloud agreement specifically lists the fonts in the list of the restricted fonts - you can always register Myriad Pro through Adobe's Typekit service (see: Myriad Pro |) Typekit) so that circumvents this problem.

  My advice - if you need evidence that the fonts of your use of any good - then I would contact Adobe directly, in order to have their response in writing. See: https://helpx.adobe.com/contact.html

  If you are just doing a personal project, and you put the work on YouTube (even if you get advertising revenue as part of the YouTube partner program), and then the case to get into any kind of trouble because of policies is VERY thin - but if you want to play it is really safe, it is best to do your research , and make sure you have something in writing say that everything is perfect.

  If in doubt - talk to a lawyer, because they will be able to do a risk assessment appropriate - even if it is somewhat a grey area.

  We had similar issues trying to license of Adobe Stock content - a few clauses in the agreement that is very unfortunate entertainment lawyers.

• Receive error messages: setup windows tries to install something and first program is not responding

  Original title: Windows install.

  I get a pop up showing that 'windows install' tries to install something (does not say what) when you click Cancel, nothing happens, 10 min later a another window appears and indicates the first program does not. Duh!

  I am running Vista 32 bt

  Hi liwop,

  1. What is the full error message you get?

  2. you remember to make changes to the computer before this problem?

  You can read the following article and try the steps for installation of Windows problems and check if this can help:

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651#reso1

  Hope this information is useful.

• How to make the Subvi when I make use of the structure of the event

  Hello everyone

  I don't really understand how to make use of Subvi when I use the event structures in vi?

  When just make buttons on the controls Subvi connectors and assign them the vi stops working as I expected.

  I've added an example vi I do not operate as a Subvi.

  Thanks for advantage.

  I think raise you an event to change value via the input connector, that you hope to do. One ugly semi solution is to get the button references and make a Value property (Signal).

  A better solution if you want Hasina events in a subvi is to record user events and send the registry-event thread for the sub - vi, where you can use these events to the event structure. Check that the user created events and examples of dynamic event.

  /Y

• How can I make the full screen of the first rectangle in a vertical Parallax scrolling site?

  My site is www.train-nourish-talk.com.au

  As you can see I want to get the first rectangle (the one with the white background and the TNT logo) the size of the whole screen if you do not the following rectangle (subject of article) until you press the button about.

  I tried several ways to do this with no luck.

  Hi Katherine,

  There is no surefire way to achieve because it can vary according to the size/resolution of the screen. You can try to make a rectangle large enough, big enough to cover the commonly used screen size/resolution.

  Kind regards

  Aish

• How to make the Extension Panel Compateble with first Pro CC

  Hi all

  We use to make our Extension for first pro CS6 Flash builder 4.6 applications and Extension builder 2.0 Panel and they work very well.

  Now we must extend this facility for first pro app CC, we tested these Panel previously in first CC pro about a month ago and it worked very well in the CC of Premiere pro. But now, we have tried to install our extension (.zxp) on different machines which is having the last first Pro CC inside, the Panel shows that one in the CC Adobe Extension Manager installed, but in the Extension menu, we are not able to see our panel.

  Can someone help us with what can be the problem?

  We downloaded Extension builder 2.1 test also but it only an exe file and installed in my machine which did not make any difference.

  Is it possible to do a Panel extension that will work well in first Pro CC using the Flash builder 4.6 and Extension builder 2.0 or should change us our development environment?

  Please suggest.

  Hello

  You may need to adjust you the host Version entry in the:

  Version of the host = "[6.0,7.9]".

  This will ensure that this Panel charge you in all 6.X and 7.X versions first. You can also have the following entry:

  Version of the host = "6.0".

  which means that the Group of experts will be responsible in all versions of creation from 6.0

  I also recommend the suggestion of Hallgrímur use EB 2.1 to ensure that you sign your extension correctly as part of the export process.

  Kind regards

  LEA

• I've updated to Snow Leopard for OSX El Capitan as the info said that my Mac 2009 could be updated.  However, I had a lot of problems and it is extremely slow, among other things.  Should I have upgraded Yosemite or something else first?

  I have a 2009 IMac and had Snow Leopard 10.6.8 and IPhotos, latest version.  While he was trying to use something new, I wanted to download (can't remember what now) my system said that I had to switch to OSX El Capitan, so I did.  Since then, I've had nothing but problems, the computer is very slow to open anything and Photos is terrible - I can't do anything with it and I hate it!  I much preferred IPhotos.  My question is, should I have upgraded to Yosemite or something else before going directly to El Capitan?  If so, what can I do now to remedy the situation?  Thanks for any advice.

  My question is, should I have upgraded to Yosemite or something else before going directly to El Capitan?

  No, but you must have insured all the software you have installed, changes to the system, in particular, was compatible with El Capitan.

  You can use iPhoto, but you should get used to the Photos like iPhoto will be is more up-to-date and may stop working at some point.

  If you run this program, it will show what is installed. After the output here and we might be able to offer advice on what's causing your problems

  http://etrecheck.com

• Range of the program adjust the lag on first convocation

  Hi, I just noticed this discrepancy, but it turns out that he's always been there.

  Basically, I have 2 buttons on the screen - "Ave" and "Std".  The default view is Ave and when I click the Std button, RangeY is adjusted according the current selection button programmatically.  For some reason any lag on the first Std click there and then it's all good go back between Ave and Std.

  Thank you

  Private beach m_rangeY;
  
  Audience RangeY
  
  {
  
      get {return m_rangeY ;}
  
      Set {m_rangeY = value; OnPropertyChanged ("RangeY"); }
  
  }

  Range = ShowAve? Ave.RangeY: Std.RangeY;
  
  If the beach was not established then autotuning
  If (beach. Minimum == 0 & range. Maximum == 0)
  {
       RangeYAdjuster = RangeAdjuster.FitExactly;
  }
  on the other
  {
       RangeYAdjuster = RangeAdjuster.None;
       RangeY = range; If I put this comment out line, there is no lag
  }

  I use Measurement Studio 2015 in Visual Studio 2013.

  These lines in the output window indicates that the graph is data reception/rendering for the first time when you click on Std.

  To exclude a control problem, another change, you can try is to move the data source assignment occurs after that executed the links:

  Dispatcher.BeginInvoke( new Action( delegate {
        GraphMain.DataSource = ShowAve ? GetArrayAve( ) : GetArrayStd( ); // MY CHANGE
    } ), DispatcherPriority.DataBind - 1 );

• Is it possible to see if a Subvi has something connected to a Terminal?

  If I have a sub vi within a main program and the terminal is not necessary. Is there a way to know if something is connected to the Terminal?

  It's very fast and very dirty, but just to give you an idea.

• Node FB: Initialize on first convocation

  Hi all

  Don't know why, but my Initialize on First Call option on some of my comments nodes is disabled.  Can you tell me why?  Thank you!

  Yik

  The feedback node can overall initiallized unless wire you a value to initialize the Terminal.   When wire you the initial value of the other options are enabled.

  Some help is a bit lacking but if you select nodes of comments property page is explained here

• Videos won't load is not properly on first convocation... desperate online

  Problem weird here, people.  I have a web page created on board animate that reads videos (4) at the same time and it works very well by using "Preview in the browser."  It does NOT correctly load the time _first_, it is called from the Web site.  It - everything except videos - charge that partially the first time that a not in browser's cache (Firefox, Opera, Chrome, Safari) trying to load the page.  However, after trying to load the page from that first time, if you go immediately to any other Web site and then come back to my site to load the page, the page loads correctly.  It kills me.  I'm guessing that this behavior will be immediately recognized by someone who can tell me a solution.

  To show this behavior:

  1) go to the http://www.lightisrising.com

  Loads a partial page (without animation in the upper left corner, bottom left, right, and lower right cells).

  2) go to another website, such as Adobe.com

  (3) back to www.lightisrising.com, and the page load and play the videos properly.

  Of course, I need the page to load correctly the FIRST time someone visits it.

  Thanks in advance for any help. Very much appreciated.

  There seems to be a bug html5 video. with several auto-play videos, it will display: none; the first time it loads.

  I'm still working on edgehero 0.3 and I fixed it already, simply by adding some css display: block; for the video tag.

  I hope that helps you fix.

  -Rob

• How to make a black object something blue?

  I tried the color function replace, but it doesn't seem to work when you start with black, only when the initial color is actually a color (for example, red).  Help?  When I try to change the black color it changes just the picture of a shade of gray.  Thank you all!

  Black or white is not a color, if you have to fake a first small.  Try the color and click on colorize and see if that helps.

• How to make in the ADF, something like a column shape

  Hi guys...
  I would like to list a table from the database... and I have a a column named type (A, O, S). Now I wan this would be made a read-only table as this subscription Abonament, Option.
  I tried to put on the ground a LOV (static) but it seems that he does not receive the corresponding value (full name) of the LOV for each line...
  Forms, he would make a non-base of data column that will be filled for each line...
  How are you?
  Thank you

  You can add a transitional attribute to your view object:
  http://download.Oracle.com/docs/CD/E12839_01/Web.1111/b31974/bcquerying.htm#CHDHJHBI

• During the phase of writing DVD from Movie Maker, if I have something or play a game, which will interfere with the DVD burning?

  It takes several minutes or even an hour or two to burn the DVD, if I wanted to use MS Word or MS Access play a game while I'm waiting, my typing or the game interferes with burning DVDs?

  It takes several minutes or even an hour or two to burn the DVD, if I wanted to use MS Word or MS Access play a game while I'm waiting, my typing or the game interferes with burning DVDs?

  ========================================
  This is not an easy to answer question because to a large extent, it would be
  depends on your system resources. However... the video coding
  is a task intensive CPU and it is certainly possible that multi-tasking
  the process could lead to problems.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• ListFieldCallBack DrawListRow will not display background on first convocation

  I have been racking my head for a few hours trying to get this working.  The bottom of my custom list field updates only when it is updated, not on initial load.  I have a custom listfield (modification of the listfield example).  From my main screen, I opened a 2nd screen, load the list and display the data.  It works without error.

  My problem is that in the drawListRow of ListFieldCallback, I have:

  public void drawListRow(ListField listfield, Graphics g, int index, int y, int width) {   EventTableList tableListField = (EventTableList) listfield; Background bkg = BackgroundFactory.createSolidBackground(Color.CHOCOLATE);  tableListField.setBackground(bkg);              TableRowManager rowManager = tableListField._rows[index];                       rowManager.drawRow(g, 0, y, width, tableListField.getRowHeight());              }
  

  The text of each line, but the background is only updated when I

  (a) highlight the line

  (b) add or delete a folder (which calls the method of painting even I call from my listfield constructor).

  * I have a myPaint method in the class listfield invalidate calls, my constructor is called and it is also called when a record is added/removed from the list.

  Any thoughts on what could happen?

  I use the 4.6 component package.

  Thanks in advance.

  set the background when you create the listfield.