Make a translation specific LR of monitor in the laboratory?

Similar Questions

• How to make a web specific link to open in Firefox while explorer is my defalut

  Unfortunately, I need to explore to be my default at work.
  But I want to make shortcuts on my desktop to specific Web sites that will be open in firefox.
  (in crome, it is posiball by adding a shortcut to an application)

  To do this, you will need to make copies of Firefox desktop shortcut and add the URL to the target line after the path to the Firefox program. Leave a space before the URL.

  See also:

  • https://developer.Mozilla.org/Command_Line_Options

• Satellite Pro A660 - extended monitor on the left?

  I have some trouble getting the extended screen (2) to be positioned on the left side of my laptop A660:

  I have my new Toshiba (thanks to his monitor, call Lap1) set to the right of my big external flat screen (Ext2).

  In the nVidia control panel, I have the options like in the screenshot, that allows the Ext2 sit to the right of the Lap1, which means that my mouse goes to the Ext2 on the other side (the right side) of the monitor Lap1...

  Is there a way to get the Ext2 and Lap1 monitors (see screenshot: http://i53.tinypic.com/i39myd.jpg) to the position of the switch for my Lap1 is extended to the LEFT with Ext2?

  Any help much appreciated!

  HL

  Hello

  > Is there a way to get the Ext2 and Lap1 monitors the position of the switch so my Lap1 by Ext2 is extended to the LEFT

  To be honest, I don't know if it's possible to m.
  I n t have a laptop but the A660 and the external monitor is also connected to this laptop. I use the extended so desktop but eat t n for this scope on the left side.
  But I have an Intel graphics card. Even if the GPU driver has been updated, the Office may be extended to the right only.

  But I managed to make my external monitor as the MAIN monitor and the laptop as secondary display monitor.

• How to launch OR monitor in the 2nd PC?

  Hello, Chris,.

  I just realized that I need a 2nd PC to run the monitor NOR with my Configurator running at the same time.

  so I implemented PC2 and bought an another USB-8486. After you have installed the driver software and hardware.

  I tried running CM in PC2, however, it gave me an error message saying that there is a conflict in the network.

  Could I get some Idea how to launch the configurator and the monitor at the same time with two workstations?

  Thank you, have a nice day!

  Johnny

  Hi John,.

  I'm glad to hear you again.

  First of all, let me give you the steps on how to use the monitor.
  1. start the utility of Configuration of Interface OR-FBUS.
  2. in the configuration window, select the port you want to configure, and then click Modify.
  3. Select monitor to use.
  4. click on the OK button.
  Your software is configured.

  So to be clear, Configurator relies on the Communications Manager (CM). While Monitor is a separate software that does not rely on the CM in total.
  To run the ICU, you should first close CM. And to run Configurator and monitor, you must configure the interface first.

  For your application to run on the configurator and monitor at the same time, there are two solutions.
  1. you can run the configurator and monitor at the same time on the same laptop too. In this solution, you need two USB-8486 and configure one of them to monitor usage.

  2. just like you mentioned to run the configurator and monitor in two PC. Yet once, you must configure one of them to monitor usage.

  And since the default address for the NOR-FBUS interface card is 16. If you did not change the address for the interface by default and run CM directly, which will have two same care address in the same network. That translates into the conflict.

  Pleaes try again after configuration. Thank you.

  Have a great day too! :-)

  -Chris

• W530 need to use the external monitor as the main

  I have a training environment with the help of portable computers W530, who are locked in a box in front of the offices. It is not practical to reach the computer as it's hidden and so I need to use the dvi cable external monitor for the configuration of the bios, boot order, etc..

  Currently, boot options are hidden from the external screen until windows loads. The external monitor would then become active. A way around the monitor to the laptop altogether?

  Thank you

  Russ

  VGA is driven by Nvidia, so apply the same parameters. Comes to the boot monitor in VGA BIOS (I forgot what we call this specific setting, as my W530 is at home). You should always pass nvidia Optimus only.

• I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

  I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

  Hello

  1. what operating system is installed on the computer?
  2. what web browser are you using to play the games online?
  3. don't you make changes to the computer before the show?

  If you use Internet Explorer, then I suggest you to try the steps from the following link:

  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246
  
  Additional information:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Solve game problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-game-problems

  The problems of the game performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems

  Troubleshoot display with Microsoft games
  http://support.Microsoft.com/kb/263039

• How to connect an additional monitor for the gateway all-in-one?

  Hello you all, I have a question I hope you a lot more smarter computer people can help me with. I have a friend who has a gateway all in one model #-ZX4931. It has a VGA port on the back. It has been also updated for Windows 10. I'm house sitting and dog looking for her in a few weeks

  I want to plug the additional monitor which by the way, it's a Dell (sorry) to work on a project I'am doing right now. I try to use the screen that she has on the All In One and I didn't like how my project came out looking

  I see on the back of its All In One, it has a VGA port. I Google several times and different words from Google, which told me that you cannot plug an additional external monitor for all in one PC, so I'm confused as to why there is a VGA port, if you couldn't plug the external monitor

  in any case, can someone please help me and give me details on how to connect an external monitor, in addition to its gateway all in one model #-ZX4931

  Looking at your specific model, I think you can try to connect an external monitor via the VGA port.

  Once you have connected the secondary monitor using the VGA port, press control + p and main Windows logo if you are able to extend or clone your desktop.

• additional monitor on the HP pavilion dm1 laptop?

  You can run an extra monitor on the HP pavilion dm1 laptop? If so, how?

  Hello

  It's very simple, you can buy a new monitor with HDMI (digital) or VGA (analog) port. As mentioned above, the HDMI is the way to go. Make sure that you have an HDMI cable.

  Just connect the cable to the monitor & machine, start the machine and

  • Right-click on an empty area of the desktop
  • Select Customize,
  • Select display
  • Select change display settings

  You should see 2 screens (1 # & #2). You can select one of the options in the menu drop-down.

  Kind regards

• I have only a single ID and would like to know if its possible to monitor all the VLANS.

  With only one ID I I want to know if it is possible to monitor all my VLAN in the network. I use version 4 ID and VMS MC 1.1.

  If I have to set my internal addresses and those which I define as internal are considered as approved, in the case that I have configure a port in my central switch to monitor all the VLANS in my network and connect the ID to the destination monitor port to sniff all the VLAN, VLAN which I consider as an intern?

  Also, I have switches catalyst 6006 and 6509 with version 5.1 (3) and 12.1 in each case, can I apply for fleeing to take acctions when an attack is detected?

  Is it possible this configuration?

  Thanks for any help-

  I don't know if the ID is used to detect the specific activity you mentioned. You would need to go through our list of signatures to see if it's possible. You can even submit a new assignment and ask this question again.

  As for the actions.

  Cat OS 5.3 should allow you to be able to inject a TCP Reset packets through a span port (requires the parameter enable inpackets).

  In regards to the blocking with Cat OS 5.3, I don't think that this version supports the VACL. You may need to upgrade the version of the OS to chat if you want to block with VACL, and you also need a PFC and an MSFC on the supervisor.

  NOTE: If you have an MSFC making routing you may also block with the traditional router ACL on the MSFC.

  On the IOS running native 6509 (where IOS instead of the traditional CatOS runs on the prime contractor), there may be a problem with TCP resets. I don't know if the port of the monitor (equivalent IOS native span port) will allow the incoming TCP resets. You need to browse the documentation.

  Some versions of native IOS (I think that what you have newer versions) will also allow you to monitor through the capture of Vlan ACLS feature. If the sensor is followed by a VACL Capture port instead of a port monitor then I think that the TCP reset works OK, but I have not tested.

  With native IOS the sensor supports router blocking with the traditional ACL, it does not support blocking with Vlan ACL in native IOS.

  NOTE: The difference between router ACL and Vlan ACL is the Vlan ACL is applied to the vlan and applies to all packages comining and at the exit of the Vlan. While the router ACL is actually applied to the INTERFACE of the Vlan where an IP address has been assigned and only applies to packets routed in or off the Vlan.

  NOTE: Native IOS requires that the master has an MSFC even load the image.

• Monitoring of the process of Linux/Unix

  Hello

  What is the best way to monitor the unix/linux process using Foglight?  Suggestions welcome!

  Thank you

  Davie

  If you want tosee process albums that consume resources. you get that monitoring of the operating system.

  If you are interested in a specific process or a set of procedures for monitoring appmonitor is the right agent.

  You can see an example of use of appmonitor here

  http://communities.quest.com/docs/doc-7816

  Golan

• When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Adobe first Pro 2015 CC only!

  When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Adobe first Pro 2015 CC only!

  Please make sure that the audio and video tracks are highlighted.

• I just added a gift card for iTunes and my credit card is low. I'm trying to make a purchase, but it won't take the gift card and he keeps trying to remove the credit card. What should I do?

  I just added an iTunes gift card and I am trying to make a purchase. My current credit card is too low to make this purchase. How can I get the gift card funds get used first?

  * I tried solvent of the card, but do not know how do that either on account/payment.

  You use the sharing of family?

  If not, his look as if you have a problem in your iTunes account,

  gift card, you have the options to choose a redeem code to place the card, credit

  in your case, I recommend contact that support the iTunes to Apple Care.

• Why firefox did ask to make changes to my computer whenever I open the browser. Why is the screen pixelated all?

  When click on firefox on my desktop that a message appears to ask me if I will allow firefox to make changes to my computer. It happens every time. each page is also all pixelated and barely visible. the Explorer IS NOT to do THIS.

  A possible cause of this message, it is that Firefox is configured to run as administrator.

  Make sure that Firefox is not set to run as administrator.
  Right click on the desktop Firefox shortcut and choose "Properties".

  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.

• Can I set up a secondary monitor to the HD on my iMac mid 2011

  Can I set up a secondary monitor to the HD on my iMac mid-2011 with no problems. I cannot afford to upgrade to the new iMac 27-inch and wanted to update my monitor.

  Is this possible on the Mid 2011 iMac?

  Yes.

  Your best option is to choose a good monitor that has Display Port or DVI input and shy away from those who only have HDMI and VGA input.

  For a display Port monitor you will need a Mini Display Port to Display Port cable if it is not provided with the monitor.

  For a DVI monitor you will need to a Mini DisplayPort to DVI adapter and a DVI cable.

• How to find a specific voice memo file in the backup from my iPhone to my Mac? I know where to find the backup, but not how to recover specific files. Thank you.

  How to find a specific voice memo file in the backup from my iPhone to my Mac? I know where to find the backup, but not how to recover specific files. Thank you.

  You can't look "inside" a backup. Just use iTunes to sync with your iPhone, then you'll see a separate category for voice memos in the sidebar.