Make calls to pone

Similar Questions

• Updated to IOS 10.0.2 and can now make calls

  I have upgraded to IOS 10.0.2 this morning on my iphone 5 and now I can't make cell calls - I can get the texts, voicemails, go on the Internet (Safari), but no cell bars!  Has taken my iphone from Verizon, and they installed a new SIM card and also did a reset... still nothing.  Is this a problem with IOS? Others have it?

  The ability to make calls is a function of carrier. This wouldn't be a problem to iOS. They should take a look at your cellular account. If you can get text messages and data works, then your account is not properly configured for calls. I suggest you take it to a shop of the company rather than a dealer to have it checked, or call Verizon customer service and explain your situation and what has already been done.

• I can receive but cannot make calls from Mac

  Hello

  I try to have calls using my iPhone connected to my MacBook Air, but I have this message "your iPhone should use the same iCloud and FaceTime account.". This is something that surprises me because I can receive calls from my MacBook, but I can't make calls from my MacBook. There's someone who have / had the same problem?

  Thank you

  CO

  OS X El Capitan: use your Mac to make and receive phone calls

  Make calls

  FaceTime: Enter a phone number in the search field and then click the Audio button or click on Audio to see your recent calls.

• Portege M400: Is it possible to receive and make calls with the SIM card

  Is it possible to receive and make calls with the card SIM module in the Portege M400?

  I know that you can send and receive sms messeges, which, according to me, the software is not all good because you can't hold much, and you can't send to ems or mms.

  But there may be other software here?

  Hello

  What software do you mean exactly?

  As far as I know that the MobiLink was preinstalled on some units Portege M400.
  This software supports these features:
  Send and receive SMS, composition and read TEXT messages in several languages, compose and send to multiple recipients, the mobile contacts address book support, Rich edit for the launch of URL and Email using embedded addresses.

  As you can see that you can not use this software to make calls!
  And unfortunately other software does not know me :(

  With regard to the MobiLink Communications Software Suite;
  The details can be verified here:
  http://www.novatelwireless.com/products/solutions/MobiLink.html

  Greetings

• I want to register my phone with a chip from the Bahamas to make calls to the

  I want to register my phone with a chip from the Bahamas to make calls to the United States, but it is not an option. Is there a work around for another option? I have unlimited international calls

  Unfortunately, the SkypeToGo program is not available in the Bahamas.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• Just updated to iOS 9.2.1 - can make calls, but not volume?

  Hello

  I have updated to iOS 9.2.1 this morning.

  Since then, I've noticed that when I have make or receive a phone call, I hear nothing on the other end.  When I turn on the speakers, I hear noises, but it is extremely "resonant" and I can't have a conversation.

  When I make calls with other applications such as FB Messenger or WhatsApp, they work perfectly.

  Any ideas?  I'm kinda a noob of techno, tried to change back to my old iOS, but for me it's impossible.

  Thanks in advance.

  I wasn't abable to call, but I can receive...

  I reboot and everything what you are looking for a good now...

  Rick

• my Apple Watch doesn't let me take or make calls. Help please

  my Apple Watch let me make a call and then wouldn't take or make calls more. To be more precise I can't audio here of the other person.

  Hi Hannah

  It can help to cancel your iPhone in a Bluetooth headset pairing, if a currently associated with it.

  Otherwise, it can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

• Hello, I bought a phone to the Panama. They sold me as unlocked. I live in the Brazil. He ran once the telephone network. and is now unsigned. I can't make calls.

  Hello, I bought a phone to the Panama. They sold me as unlocked. I live in the Brazil. He ran once the telephone network. and is now unsigned. I can't make calls.

  Take it back to the store where you bought it.

• DEFY: Cannot make calls...

  Hello

  I just bought Defy and I think that it is large, has many interesting features, but it does not call...

  About 10 minutes after it's turned on, I can't make all the calls (from widgets, dialer, contacts...). As soon as I press the dial button, a pop-up says "call time 00:00. And then the call is terminated.

  So I decided to 'factory reset '. But even after factory reset, this question is reproduced.

  I have attached two files: one is the journal when I can make a call and the other is there is not possible to make calls.

  A fact interesting, is that each time I start up (or factory reset) the phone, I can make calls for 10 minutes (approximately). After this time, if I want to call again, I have to start up the phone once more.

  To receive calls/SMS, it works fine.

  I think this phone is great, and I don't want to give it up.

  Can someone help me please?

  Thank you.

  I just found the answer.

  The problem is how Android deals with 'Blocking' and 'call forwarding '. If you try to change the settings, you can never reset these settings again...

  I tried to use my SIM card from mobile phones very simple, and all show me the message "you can not call so that the call blocking is active... ». But I never changed the settings...

  This also occurs with other suppliers of Android.

  The only solution is: go to your company and ask them to change your current SIM card to a new (not your line number, just the SIM card). And do not use the "call forwarding" and "call blocking" in Android

• Windows Media Player makes calls of NOR-fast Motion (Revisited)

  About 2 years ago, I posted a message on this forum about a condition where running Windows Media Player increased the rate that my Visual Basic 6 program has been able to contact a PCI-7344 Panel using calls OR-Motion (original post). To summarize the post, my VB program be called functions OR-Motion speed after that the computer is started and simply in the process of running Windows Media Player would allow my program make calls of NOR-faster Motion. I created a program demo, posted and was able to reproduce the situation constantly using several different computers & cards PCI-7344. However, no one at National Instruments could reproduce that; It seems that the calls function always ran fast for them and never ran slowly. I finally gave up and let the issue of dying and said reluctantly, our customers just start WMP to increase the speed of the machine.

  Now, I'm working on rewriting the software to the machine using VB.NET 2008 and Windows 7. My first hope was that the problem had gone with either the new VB, or Windows 7, but that doesn't seem to be the case. When I was with Windows XP, I could get recall for an improvement of the functions running WMP. With Windows 7, I can not get the increased rate even after the execution of WMP.

  Today, I took two new computers identical and loaded Windows XP on Windows 7 and one on the other. I put a new PCI-7344 card in each computer. I then installed version 8.2 of NO-Motion on each. With the exception of Microsoft .NET 3.5, which is necessary for my test VB.NET program, no other software has been installed, do not even Visual Basic. I started on each PC, ran my test program to determine the calls/sec, start Windows Media Player and my test program is represented. Here are the results:

  Test Windows XP & VB 6 program-128/s before launching WMP, 1024 Kbps after the execution of WMP

  Test of Windows XP & VB.NET 2008-128/s before WMP program, 1024 Kbps after WMP

  VB 6-256 calls/s before launching WMP, 256 Kbps calls after execution of WMP and Windows 7 test program

  Windows 7 test program and VB.NET - 256 Kbps calls before you launch WMP, 256 Kbps calls after execution of WMP

  As you can see, WMP has increased the rate of call of function OR-Motion on Windows XP, but has no effect in Windows 7. In addition, it did not matter which version of Visual Basic has been used.

  My first question is: what determines the rate at which he called on a NOR-Motion function? It seems that the maximum is 1024/s, which is consistent with what I saw 2 years ago even on slower computers. I would have thought that would be a faster PC function calls could also be made faster, but appears not to be the case. And is there some significance at 128, 256, and 1024 rates?

  My next question is: someone at - it else noticed faster or slower speeds using NOR-Motion after moving to Windows 7?

  The software that I work on the controls, a machine used on a production floor where the cycle time is critical and even save a fraction of a second can be important. With Windows XP, we have reduced the cycle time of 5 or 6 seconds by running WMP. We would like to start using Windows 7, but we won't be able to if it means cycle slower times on our machines.

  The source code for VB 6 and VB.NET 2008 for the demo program is attached. This is the computer that I used for the test today, but I was also able to reproduce this on computers Dell, LS, Xycom and Allen-Bradley. I also used several different versions of NOR-Motion and WMP with the same results.

  
  

• How to make calls telephone entrants House to show on computer?

  Original title: show phone numbers.

  Windows XP SP3, PCI Soft Data Fax Modem with SmartCP. My question is how to make calls telephone entrants House to show on computer?

  I have phone line connected to the modem 'in' connection and main phone is connected to the "out" connection. The computer used to display incoming calls from land line, but I had a crash that required me to do a clean reinstall of Win XP and etc, etc, and I don't remember how to set up.

  Thanks in advance,

  Chris

  CallerID display isn't natively provided by Windows XP.  Either you need to reinstall the software SmartCP and/or additional software originally installed on your computer.

  Go to the website of the manufacturer of your computer for you make sure you get the correct version.

• Live messenger won't open so I can make calls or use Skype with my webcam.

  Live messenger won't open so I can make calls or use Skype with my webcam.

  Now Windows Live Solution Center is offline for maintenance. When it's over, please repost in forum Messenger:
  http://www.windowslivehelp.com/default.aspx?aspxerrorpath=/forums.aspx

  This methos involves editing the registry...
  If you are not comfortable with editing the registry, please do not do.

  Start button > Search box, type regedit > press the Enter key > (uac prompt) > expand (click on the pointer before) HKET_CURRENT_USER > expand Software > expand Microsoft > expand MSNMessenger > expand PerPassportSettings > under PerPassportSettings, find 2 folders with a series of numbers > delete the two folders including their subfolders > window regedit.
  Restart the Messenger.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Need help to make calls in blackberry

  Hello friends,

  I need your help to make calls in blackberry OS version 6.0 and later versions.

  I write code to use, it works very well below 6.0 but on 6.0 and above all he does not.

  When I try this code on 6.0 I receive "cannot connect, call in progress.

  According to my research, this is a specific problem of the OS, but I'm not satisfied with this research.

  Actually I do an application that will dial a specific number again and again for 5 times ({at least} chosen by the user).

  Code: -.

      Application.getApplication().invokeLater(new Runnable() {
  
              public void run() {
                  try {
                      ApplicationManager.getApplicationManager().requestForeground(appProcessId);
                      Invoke.invokeApplication(Invoke.APP_TYPE_PHONE, new PhoneArguments(PhoneArguments.ARG_CALL, phoneNumber));
                            } catch (Exception ex) {
  //                    ex.printStackTrace();
                  }
              }
          });
  

  To resolve this problem, I tried for a few weeks, but no luck.

  Please help me.

  Thanks guys,.

  I found the solution to this problem,

  to fix this, I maintain a difference of 10 seconds on each call, I did.

  Thank you once again

• SIP phones to register but cannot make calls to another

  Did I miss something in the following configs? The phones are able to register, but cannot make calls to another? Should I add to the config to be able to make calls?

  Current configuration: 8173 bytes
  !
  ! Last configuration change at 20:35:57 UTC Tuesday, February 2, 2016 of wachter
  !
  version 15.4
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  hostname KCC-CUCME-2921
  !
  boot-start-marker
  boot-end-marker
  !
  !
  ! type map necessary for vwic/slot-slot 0/0 control
  logging buffered 51200 warnings
  enable secret 5 $1$ fner$ un2VRxsPt6gy418Fm/tHz.
  !
  No aaa new-model
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  IP VOICE dhcp pool
  network 192.168.2.0 255.255.255.0
  4.4.4.4 DNS Server 8.8.8.8
  default router 192.168.2.1
  option 150 ip 192.168.2.1
  Infinite rental
  !
  !
  !
  IP domain name kccoring.local
  IP cef
  No ipv6 cef
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  !
  !
  !
  CTS verbose logging
  !
  Crypto pki trustpoint TP-self-signed-1027156387
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 1027156387
  revocation checking no
  rsakeypair TP-self-signed-1027156387
  !
  voice-card 0
  !
  !
  !
  voip phone service
  list of approved IP addresses
  IPv4 192.168.0.0 255.255.0.0
  h323 connections allow h323
  allow connections h323 to SIP
  allow connections sip h323
  allow sip to sip connections
  Fax protocol t38 ls-redundancy version 0 0 hs-redundancy 0 help none
  SIP
  binding control source-interface GigabitEthernet0/0.20
  bind media source-interface GigabitEthernet0/0.20
  Registration Server expires max 600 min 60
  !
  voice class codec 1
  preferably 1 codec g729r8
  g711ulaw codec preference 2
  iLBC codec preference 3
  !
  !
  !
  !
  Global voice registry
  FMC of fashion
  source-address 192.168.2.1 port 5060
  Max - dn 25
  Max-pool 25
  Zone 8
  Flash TFTP-path:
  create the profile synchronization 0042525408078253
  !
  interface GigabitEthernet0/0.20
  encapsulation dot1Q 20
  IP 192.168.2.1 255.255.255.0
  !
  interface ISM0/0
  IP unnumbered GigabitEthernet0/0.20
  IP virtual-reassembly in
  rescue service module
  service-module ip 192.168.2.5 address 255.255.255.0
  Service-module ip default gateway 192.168.2.1
  !
  interface GigabitEthernet0/1
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface ISM0/1
  no ip address
  !
  interface Vlan1
  no ip address
  !
  IP forward-Protocol ND
  !
  IP http server
  23 class IP http access
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  IP route 192.168.2.5 255.255.255.255 ISM0/0
  !
  !
  !
  flash TFTP server: kern2.78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: kern78xx.11 - 0-1 - 11.sbn
  flash TFTP server: rootfs2.78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: rootfs78xx.11 - 0-1 - 11.sbn
  flash TFTP server: sboot2.78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: sboot78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: sip78xx.11 - 0-1 - 11.loads
  Flash TFTP server: its
  Flash: copstart.sh TFTP server
  Flash: load36213.txt TFTP server
  Flash: load621.txt TFTP server
  Flash: load622.txt TFTP server
  Flash: load623.txt TFTP server
  access-list 23 allow 10.10.10.0 0.0.0.127
  !
  control plan
  !
  !
  Voice-port 1/0/0
  !
  Voice-port 1/0/1
  !
  voice-port 1/0/2
  !
  Voice-port 1/0/3
  !
  !
  !
  !
  !
  MGCP behavior considered range tgcp only
  MGCP comedia-role behavior no
  disable the behavior MGCP comedia-check-media-src
  disable the behavior of MGCP comedia-sdp-force
  !
  profile MGCP default

  go to respective voice register pool and configure ' no figure collect kpml

  example of

  vocal range pool 1

  No kpml transferred to numbers

  Codec to g711u

  reset

  Then go to global registry of telephone communications and perform without creating a profile and create profile

  BR,

  Nadeem Ahmed

  Please note all the useful post.

• Asked to make calls and send pictures at the same time. Possible?

  Hello

  its my first post here. I have very little experience working with BlackBerry. I've been playing with 9800 Simulator and some samples provided with IDE 6.0, I serched for slution to my problem with no luck.

  My question is: is at - there a Posibility to make an app, that would have a built-in single-list contacts with multiple phone numbers, will allow to call (with a built-in list contact phone numbers by pressing a button) and take pictures and email them during this call?

  App like this is a request for a doctor - it needs to be as user-friendly as possible, the person who has never used a Blackberry phone should be able to make calls and send photos. The idea is that a doctor during a call with another doctor would be able to take a picture and send it to the person he calls (or other) in order to consult.

  If my explanations are confusing, I will try to write differently.

  Thanks in advance.

  I am not the best person to answer, but if I understand correctly, simultaneous data and voice is possible, but depends on carrier and the type of wireless connection you - I think you need 3 g to do. With this reservation, it seems possible to what you are suggesting.