make changes to the PDF format

Similar Questions

• Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

  Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

  Hi rkusa1,

  Thank you for using Microsoft Windows forum

  QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

  However, you may want to follow these steps.

  1. right click on your quickbooks start exe file and open properties.

  2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

  3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

  4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

  5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

  6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

  7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

  8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

  9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

  You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

  For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

  If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

  Kind regards
  Aziz Nadeem - Microsoft Support

• How does one edit/make changes to a PDF doc?

  Where will a person to get advice on edit/edit a PDF doc?

  Hello

  You will need Acrobat to edit a document that the reader isn't apt to make changes to the document.

  Secondly if you could tell us what exactly needs to be done we can help you accordingly.

  Concerning

  Sukrit diallo

• I can't make changes to the settings of Firefox - none of this works

  As usual, when I allow an update firefox Win Desktop, more things gets sacked. God I wish there was an alternative to that shit from ff!

  I can't make changes to the settings of Firefox - none of this works

  It was theme Aeon 7.5 - this is obviously totally redesigned the appearance of the settings options and caused my mouse does not work.

  Thanks for your help - and I'm sorry for the insults.

• Directory issues active with SBS 2008. Cannot use NTDSUTIL or management tools or make changes to the DNS.

  In July 2010, I've migrated a SBS2003 system to a system of SBS2008. There were a few hiccups along the way, but eventually everything worked very well and the original server was demoted and closes.

  Fast forward to today, June 2013, and now that I see errors in the event log that read:

  «This server is the owner of the following FSMO role, but considers that it not invalid.»

  "This directory server has not recently received replication of a number of directory servers."

  And when you run NTDSUTIL I can't join the domain controller by name or the domain name. I always get the following error message:
  "Error DsBindWithSpnExW 0x6ba (the RPC server is unavailable".

  I have read and tried all the imaginable solutions I could find. However, the difference between my situation and all the other scenarios that I have met is that there is usually another available domain controller. This isn't my case.

  Here is my configuration:

  1 - SBS 2008 Server.

  7 - workstations running Windows 7 Professional

  I can't run Active Directory users and computers, Active Directory and approvals, or make changes in the DNS. However, DNS is working and my domain controller points to itself as a single domain controller and resolves the name to the IP address.

  That I could track down, it's the original domain controller does not correctly downshift and there is always a ton of references to it in Active Directory, but I can't run any tools to remove the reference and seize the roles.

  Is there someone out there who can help you?

  Thanks in advance for your suggestions

  I would recommend posting your query in the TechNet Forums. This forum is dedicated for windows servers... We'll find a solution much more effective here...

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• How can I save information on a cd - rw and be able to make changes to the documents instead of read-only

  I'm trying to save the information from my laptop to a CDRW. But it wont let me make changes, says that this is a read-only.

  Hi GracieGritton,

  It is not possible to make changes on the data stored in the CD. You must copy the data to the laptop, and then make the necessary changes. You can also make the changes before saving the data to a CD.

• Unable to make changes to the registry.

  Original title: The status bar notification

  I used to be able to go to regedit, theoretically/local settings, current version, and then in the notification bar and remove previous workflow icon and another thing after the cache then go to Explorer and delete, but now I can not do this way somehow.

  I already know how this hide them

  

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, you cannot make changes in the registry, that you were able to do before. The question might be if there is a file system corruption or corruption of the registry settings. Then, I suggest you to try the steps below and see if it helps.

  Method 1

  There could be a chance that there is a file system corruption. So, I suggest you run SFC scan and see if it makes a difference.

  The file system check is a utility built into the operating system that will check for the corruption of system files. The sfc/scannow command. (System File Check) analyzes the integrity of all protected operating system files and replaces incorrect versions, damaged, altered, or damaged with correct versions where possible.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.

  • Go to Start, click all programs and open the Accessories.
  • Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  • In the command prompt, type the following command and press ENTER:

  sfc/scannow

  For more information, refer to this link:

  http://support.Microsoft.com/kb/929833/en-us

  Method 2

  If the problem persists, then there might be a corruption of the registry settings so, I suggest you to check the steps in the below mentioned thread and see if it helps you to solve the problem.

  Access denied - owner and/or setting permissions on the registry key

  Registry warning : This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• I need my permission to make changes to the network folder

  Hello

  I met a few weird problem on network
  I was provided with security reading group, write permissions on one of the network folder, now, whenever an attempt to read the file is fine, but when I would write or create any folder, it says, "you require permission to 'domainane\myid' to make changes to the file, now, what to do?

  It of permission to my self, I'm already, log on to the domain, but still,

  below things, I did up to now
  1 deleted my self by system admin security group and added again.
  2 done GPupdate, restart my PC with the boot,
  3 - tried it on different PC

  Still no change, can anyone help?

  Thank you

  Hello

  Since the network folder is on a computer in the domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 networking TechNet Forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Windows 7 does not recognize me as an administrator and do not make changes to the notifier of explicit congestion using cmd

  Windows 7 does not recognize me as an administrator and do not make changes to the notifier of explicit congestion using cmd

  I am the administrator also have an account invited and created another user account to see if this helped (she didn't)

  Hello

  If you use the command prompt, you must bring up the command prompt.

  Go in Start / All Programs / Accessories.

  Click on the command prompt and select run as administrator .

  Concerning

• Allow the child to "make changes to the computer.

  How can I allow the user of my child to "Make changes to the computer" as facilities, make her an administrator, or lose its other parental controls?

  I am using Windows 7 Parental control with none of the additional controls. I want to be able to install its programs without asking me to enter my password every 10 minutes.

  How can I allow the user of my child to "Make changes to the computer" as facilities, make her an administrator, or lose its other parental controls?

  I am using Windows 7 Parental control with none of the additional controls. I want to be able to install its programs without asking me to enter my password every 10 minutes.

  You can not. Windows 7 accounts either have administrator privileges, or they do not. There's nothing in between.

• Restrict user access to make changes to the form of assignment

  
  Dear friends,

  I'm in the need to create a diagnostic error-> client code-> customize that whenever the user attempts to make changes in the field «Job», which should an error such as "you are not allowed" and does not save. Please please help me... a friend in need is a friend indeed . Thank you

  Kind regards

  Adeel Anwer

  Hello Adeel,

  Realize you your condition do the following,

  Go to diagnostics--> CustomerID--> customize

  Sequence number: 1
  Description: JOB FIELD DISABLE

  Level: Fuction

  In the status tab:

  Triggering event: ONCE - NEW - ITEM - INSTANCE

  Trigger object: ASSGT. JOB_NAME

  Condition: leave it blank

  Processing mode: both

  
  

  In the Actions tab:

  
  

  sequence: 1

  Type: property

  Description: Disable the field of employment

  Object type: agenda

  Target the object: ASSGT. JOB_NAME

  Property name: ALTERABLE_PLUS

  Value: FALSE

  sequence: 2

  Type: Message

  Description: Error Message

  Message type: error

  Text of the message: you are not allowed. Contact the person in charge.

  Go to tools-> validate all the, then save.

  now check and let me know whether it works or not. All the best

  Thank you best regards &,.

  Knockaert

• What features you receive with subscription to export to the PDF format other than the possibility of converting a pdf to Word file?

  What features you receive with subscription to export to the PDF format other than the possibility of converting a pdf to Word file?

  Hi james5610,

  With Adobe PDF Export you can only convert in PDF https://cloud.acrobat.com/exportpdf.

  Formats of files supported for https://helpx.adobe.com/acrobat-com/kb/supported-file-formats.htmlconversion.

  Kind regards
  Nicos

• Hello, I recently created a website for a client. I also created a brochure with a QR code that automatically redirects visitors to a single page in the site. Well, I had to make changes to the site and I had to change the name of the page in which t

  Hello, I recently created a website for a client. I also created a brochure with a QR code that automatically redirects visitors to a single page in the site. Well, I had to make changes to the site and I had to change the name of the page in which the QR code pointing to. Is it possible to keep the current name of the page but create a page of automatic redirect named like the QR code? Basically, the brochures have all been printed already, so I need the QR code when analyzed in order to continue working. Now, it is not the case.

  Nevermind, I figured it. I've reproduced the page, renamed the QR that indicates the code of the page, and then he hid in the menu of page properties.

• How and in which files that I can combine my computer policy in the html for my captivate project file? I know that I need to make changes on the css, HTML, and I need to add fonts to a folder, but do not know where please help

  How and in which files that I can combine my computer policy in the html for my captivate project file? I know that I need to make changes on the css, HTML, and I need to add fonts to a folder, but do not know where please help

  https://forums.Adobe.com/servlet/JiveServlet/showImage/2-7496573-757050/pastedImage_0.PNG

  This is an image of the files I see

  If the police will not be on the end user's computer, it won't make a difference.

  You should try to include a web font, but you cannot use those during the creation of course, so when you publish or correct fonts you have alignment issues.

• When a snapshot is complete, so I can start to make changes to the virtual machine?

  When I take a snapshot in merge, a progress bar appears in the window of virtual computer, then disappears in a few seconds.

  But a picture of a clock also appears on the Fusion icon in the dock. Only the clock takes a minute or two to disappear.

  What process is the clock?  What is the take a complete snapshot?  When the progress bar disappears, or when the clock disappears?

  Can I safely begin to make changes to the virtual machine, I want to be able to restore, immediately after the progress bar disappears?

  Or, it is more prudent to wait to make changes until the clock disappears?

  Thank you

  (The progress bar and the clock appear in my Fusion 3 that I use always happy... I don't know what appears in more recent versions).

  While the stopwatch turns, Fusion is busy writing the snapshot to disk, so the performance of your comments and your host could be reduced.

  As long as the performance isn't an obstacle, you can continue to use the virtual machine while the snapshot is taken.  Merger will ensure that the snapshot includes the exact state of the virtual machine at the moment, you started the snapshot: nothing of what you are doing inside the guest, while the snapshot is in progress does not affect the State of the socket.

  See you soon,.

  --

  Darius